Bug#593432: Black screen with kms and i915
Strange. Last night's update must have changed the default
behavior. All of a sudden the content of /etc/modprobe.d/i915-kms.conf
doesn't seem to matter anymore: kms is always off. The only way
to trigger the problem is to add modeset=1 to the boot options.
I guess this makes the problem less grave, because the default
behavior works now.
For your questions: I installed the machine from scratch using
a netinstall cd in late July. From the date, the kernel must have
been 2.6.32-15. The bug was there. Before, I had been using
Lenny, and that worked fine. However, that's pre-kms anyways,
so I don't know whether that really counts as a regression.
Here's the dmesg output with kms:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-20)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu
Aug 12 13:38:27 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000176b7000 (usable)
[ 0.000000] BIOS-e820: 00000000176b7000 - 00000000176e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000176e0000 - 00000000176f0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000176f0000 - 0000000017700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017700000 - 0000000017780000 (usable)
[ 0.000000] BIOS-e820: 0000000017780000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x17780 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 017F80000 mask FFFF80000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000017780000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017400000 page 2M
[ 0.000000] 0017400000 - 0017780000 page 4k
[ 0.000000] kernel direct mapping tables up to 17780000 @ 10000-16000
[ 0.000000] RAMDISK: 1113f000 - 1194891c
[ 0.000000] ACPI: RSDP 000f6300 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 176ea420 00034 (v01 PTLTD RSDT 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 176efdf3 00074 (v01 DELL X200 06040000
PTL 0000004B)
[ 0.000000] ACPI: DSDT 176ea454 0599F (v01 DELL X200 06040000
MSFT 0100000D)
[ 0.000000] ACPI: FACS 176fcfc0 00040
[ 0.000000] ACPI: SSDT 176efe67 000BC (v01 PTLTD ACPICST1 06040000
LTP 00000001)
[ 0.000000] ACPI: SSDT 176eff23 000B5 (v01 PTLTD ACPIPST1 06040000
LTP 00000001)
[ 0.000000] ACPI: BOOT 176effd8 00028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 375MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17780000
[ 0.000000] low ram: 0 - 17780000
[ 0.000000] node 0 low ram: 00000000 - 17780000
[ 0.000000] node 0 bootmap 00012000 - 00014ef0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017780000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c6b94] TEXT DATA BSS ==>
[0001000000 - 00014c6b94]
[ 0.000000] #4 [001113f000 - 001194891c] RAMDISK ==>
[001113f000 - 001194891c]
[ 0.000000] #5 [000009e800 - 0000100000] BIOS reserved ==>
[000009e800 - 0000100000]
[ 0.000000] #6 [00014c7000 - 00014cd148] BRK ==>
[00014c7000 - 00014cd148]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000015000] BOOTMAP ==>
[0000012000 - 0000015000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017780
[ 0.000000] HighMem 0x00017780 -> 0x00017780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000176b7
[ 0.000000] 0: 0x00017700 -> 0x00017780
[ 0.000000] On node 0 totalpages: 95941
[ 0.000000] free_area_init_node: node 0, pgdat c13b26e0, node_mem_map
c14cf200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 719 pages used for memmap
[ 0.000000] Normal zone: 91240 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 -
00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000176b7000 -
00000000176e0000
[ 0.000000] PM: Registered nosave memory: 00000000176e0000 -
00000000176f0000
[ 0.000000] PM: Registered nosave memory: 00000000176f0000 -
0000000017700000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap:
18000000:e7800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016
u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 95190
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=2b4fbfbd-8cd8-4da5-b90c-7b281a41435b ro quiet modeset=1
i915.modeset=1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 366496k/384512k available (2496k kernel code,
16656k reserved, 1328k data, 368k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd7f80000 - 0xff3fe000 ( 628 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd7780000 ( 375 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc1419000 ( 368 kB)
[ 0.000000] .data : 0xc1270005 - 0xc13bc260 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270005 (2496 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 797.335 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1594.67 BogoMIPS (lpj=3189340)
[ 0.004051] Security Framework initialized
[ 0.004066] SELinux: Disabled at boot.
[ 0.004085] Mount-cache hash table entries: 512
[ 0.004380] Initializing cgroup subsys ns
[ 0.004391] Initializing cgroup subsys cpuacct
[ 0.004402] Initializing cgroup subsys devices
[ 0.004409] Initializing cgroup subsys freezer
[ 0.004416] Initializing cgroup subsys net_cls
[ 0.004472] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004480] CPU: L2 cache: 512K
[ 0.004491] mce: CPU supports 5 MCE banks
[ 0.004525] Performance Events:
[ 0.004531] no APIC, boot with the "lapic" boot parameter to
force-enable it.
[ 0.004537] no hardware sampling interrupt available.
[ 0.004543] p6 PMU driver.
[ 0.004575] ... version: 0
[ 0.004580] ... bit width: 32
[ 0.004585] ... generic registers: 2
[ 0.004591] ... value mask: 00000000ffffffff
[ 0.004597] ... max period: 000000007fffffff
[ 0.004602] ... fixed-purpose events: 0
[ 0.004608] ... event mask: 0000000000000003
[ 0.004617] Checking 'hlt' instruction... OK.
[ 0.020707] SMP alternatives: switching to UP code
[ 0.028474] Freeing SMP alternatives: 13k freed
[ 0.028492] ACPI: Core revision 20090903
[ 0.041230] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.043083] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.043092] weird, boot CPU (#0) not listed by the BIOS.
[ 0.043098] SMP motherboard not detected.
[ 0.043104] Local APIC not detected. Using dummy APIC emulation.
[ 0.043110] SMP disabled
[ 0.043551] Brought up 1 CPUs
[ 0.043559] Total of 1 processors activated (1594.67 BogoMIPS).
[ 0.044060] CPU0 attaching NULL sched-domain.
[ 0.044395] devtmpfs: initialized
[ 0.045642] regulator: core version 0.5
[ 0.045784] NET: Registered protocol family 16
[ 0.046043] ACPI: bus type pci registered
[ 0.047511] PCI: PCI BIOS revision 2.10 entry at 0xfd9a8, last bus=4
[ 0.047518] PCI: Using configuration type 1 for base access
[ 0.048815] bio: create slab <bio-0> at 0
[ 0.050159] ACPI: EC: Look up EC in DSDT
[ 0.058527] ACPI: Interpreter enabled
[ 0.058527] ACPI: (supports S0 S3 S4 S5)
[ 0.058527] ACPI: Using PIC for interrupt routing
[ 0.069332] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.069459] ACPI: Power Resource [PFAN] (on)
[ 0.070429] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.071985] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.072154] pci 0000:00:02.0: reg 10 32bit mmio pref:
[0xe8000000-0xefffffff]
[ 0.072167] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[ 0.072200] pci 0000:00:02.0: supports D1
[ 0.072232] pci 0000:00:02.1: reg 10 32bit mmio pref:
[0xf0000000-0xf7ffffff]
[ 0.072244] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[ 0.072276] pci 0000:00:02.1: supports D1
[ 0.072362] pci 0000:00:1d.0: reg 20 io port: [0x8c80-0x8c9f]
[ 0.072428] pci 0000:00:1d.1: reg 20 io port: [0x8ca0-0x8cbf]
[ 0.072494] pci 0000:00:1d.2: reg 20 io port: [0x8cc0-0x8cdf]
[ 0.072624] pci 0000:00:1f.0: quirk: region 8000-807f claimed by ICH4
ACPI/GPIO/TCO
[ 0.072634] pci 0000:00:1f.0: quirk: region 8080-80bf claimed by ICH4
GPIO
[ 0.072672] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.072685] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.072697] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.072709] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.072722] pci 0000:00:1f.1: reg 20 io port: [0x9000-0x900f]
[ 0.072734] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.072799] pci 0000:00:1f.3: reg 20 io port: [0x8ce0-0x8cff]
[ 0.072848] pci 0000:00:1f.5: reg 10 io port: [0x8400-0x84ff]
[ 0.072861] pci 0000:00:1f.5: reg 14 io port: [0x80c0-0x80ff]
[ 0.072923] pci 0000:00:1f.6: reg 10 io port: [0x8800-0x88ff]
[ 0.072936] pci 0000:00:1f.6: reg 14 io port: [0x8c00-0x8c7f]
[ 0.073020] pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.073043] pci 0000:02:03.0: supports D1 D2
[ 0.073050] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073060] pci 0000:02:03.0: PME# disabled
[ 0.073101] pci 0000:02:03.1: reg 10 32bit mmio: [0xe0200000-0xe02007ff]
[ 0.073149] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
[ 0.073158] pci 0000:02:03.1: PME# disabled
[ 0.073214] pci 0000:02:05.0: reg 10 io port: [0xa000-0xa07f]
[ 0.073227] pci 0000:02:05.0: reg 14 32bit mmio: [0xe0200800-0xe020087f]
[ 0.073256] pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.073279] pci 0000:02:05.0: supports D1 D2
[ 0.073286] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073295] pci 0000:02:05.0: PME# disabled
[ 0.073343] pci 0000:02:07.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.073367] pci 0000:02:07.0: supports D1 D2
[ 0.073375] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073383] pci 0000:02:07.0: PME# disabled
[ 0.073426] pci 0000:00:1e.0: transparent bridge
[ 0.073436] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.073446] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.073500] pci_bus 0000:00: on NUMA node 0
[ 0.073514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.073856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.082065] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.082445] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.082824] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[ 0.083205] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.083586] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.083966] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.084323] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.084664] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.084939] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.084964] vgaarb: loaded
[ 0.085186] PCI: Using ACPI for IRQ routing
[ 0.085588] Switching to clocksource tsc
[ 0.088001] pnp: PnP ACPI init
[ 0.088001] ACPI: bus type pnp registered
[ 0.091133] pnp 00:01: io resource (0xa3b0-0xa3bb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091147] pnp 00:01: io resource (0xa3c0-0xa3df) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091159] pnp 00:01: io resource (0xa7b0-0xa7bb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091171] pnp 00:01: io resource (0xa7c0-0xa7df) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091182] pnp 00:01: io resource (0xabb0-0xabbb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091194] pnp 00:01: io resource (0xabc0-0xabdf) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091206] pnp 00:01: io resource (0xafb0-0xafbb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.091217] pnp 00:01: io resource (0xafc0-0xafdf) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.096509] pnp: PnP ACPI: found 10 devices
[ 0.096516] ACPI: ACPI bus type pnp unregistered
[ 0.096527] PnPBIOS: Disabled by ACPI PNP
[ 0.096559] system 00:01: ioport range 0x7b0-0x7bb has been reserved
[ 0.096568] system 00:01: ioport range 0x7c0-0x7df has been reserved
[ 0.096578] system 00:01: ioport range 0xbb0-0xbbb has been reserved
[ 0.096587] system 00:01: ioport range 0xbc0-0xbdf has been reserved
[ 0.096596] system 00:01: ioport range 0xfb0-0xfbb has been reserved
[ 0.096606] system 00:01: ioport range 0xfc0-0xfdf has been reserved
[ 0.096615] system 00:01: ioport range 0x13b0-0x13bb has been reserved
[ 0.096624] system 00:01: ioport range 0x13c0-0x13df has been reserved
[ 0.096634] system 00:01: ioport range 0x17b0-0x17bb has been reserved
[ 0.096643] system 00:01: ioport range 0x17c0-0x17df has been reserved
[ 0.096652] system 00:01: ioport range 0x1bb0-0x1bbb has been reserved
[ 0.096662] system 00:01: ioport range 0x1bc0-0x1bdf has been reserved
[ 0.096671] system 00:01: ioport range 0x1fb0-0x1fbb has been reserved
[ 0.096680] system 00:01: ioport range 0x1fc0-0x1fdf has been reserved
[ 0.096690] system 00:01: ioport range 0x23b0-0x23bb has been reserved
[ 0.096699] system 00:01: ioport range 0x23c0-0x23df has been reserved
[ 0.096709] system 00:01: ioport range 0x27b0-0x27bb has been reserved
[ 0.096718] system 00:01: ioport range 0x27c0-0x27df has been reserved
[ 0.096727] system 00:01: ioport range 0x2bb0-0x2bbb has been reserved
[ 0.096737] system 00:01: ioport range 0x2bc0-0x2bdf has been reserved
[ 0.096746] system 00:01: ioport range 0x2fb0-0x2fbb has been reserved
[ 0.096756] system 00:01: ioport range 0x2fc0-0x2fdf has been reserved
[ 0.096766] system 00:01: ioport range 0x33b0-0x33bb has been reserved
[ 0.096775] system 00:01: ioport range 0x33c0-0x33df has been reserved
[ 0.096785] system 00:01: ioport range 0x37b0-0x37bb has been reserved
[ 0.096794] system 00:01: ioport range 0x37c0-0x37df has been reserved
[ 0.096804] system 00:01: ioport range 0x3bb0-0x3bbb has been reserved
[ 0.096813] system 00:01: ioport range 0x3bc0-0x3bdf has been reserved
[ 0.096823] system 00:01: ioport range 0x3fb0-0x3fbb has been reserved
[ 0.096833] system 00:01: ioport range 0x3fc0-0x3fdf has been reserved
[ 0.096842] system 00:01: ioport range 0x43b0-0x43bb has been reserved
[ 0.096852] system 00:01: ioport range 0x43c0-0x43df has been reserved
[ 0.096862] system 00:01: ioport range 0x47b0-0x47bb has been reserved
[ 0.096871] system 00:01: ioport range 0x47c0-0x47df has been reserved
[ 0.096881] system 00:01: ioport range 0x4bb0-0x4bbb has been reserved
[ 0.096891] system 00:01: ioport range 0x4bc0-0x4bdf has been reserved
[ 0.096901] system 00:01: ioport range 0x4fb0-0x4fbb has been reserved
[ 0.096910] system 00:01: ioport range 0x4fc0-0x4fdf has been reserved
[ 0.096920] system 00:01: ioport range 0x53b0-0x53bb has been reserved
[ 0.096930] system 00:01: ioport range 0x53c0-0x53df has been reserved
[ 0.096940] system 00:01: ioport range 0x57b0-0x57bb has been reserved
[ 0.096950] system 00:01: ioport range 0x57c0-0x57df has been reserved
[ 0.096959] system 00:01: ioport range 0x5bb0-0x5bbb has been reserved
[ 0.096969] system 00:01: ioport range 0x5bc0-0x5bdf has been reserved
[ 0.096979] system 00:01: ioport range 0x5fb0-0x5fbb has been reserved
[ 0.096989] system 00:01: ioport range 0x5fc0-0x5fdf has been reserved
[ 0.096999] system 00:01: ioport range 0x63b0-0x63bb has been reserved
[ 0.097009] system 00:01: ioport range 0x63c0-0x63df has been reserved
[ 0.097019] system 00:01: ioport range 0x67b0-0x67bb has been reserved
[ 0.097029] system 00:01: ioport range 0x67c0-0x67df has been reserved
[ 0.097039] system 00:01: ioport range 0x6bb0-0x6bbb has been reserved
[ 0.097049] system 00:01: ioport range 0x6bc0-0x6bdf has been reserved
[ 0.097059] system 00:01: ioport range 0x6fb0-0x6fbb has been reserved
[ 0.097069] system 00:01: ioport range 0x6fc0-0x6fdf has been reserved
[ 0.097079] system 00:01: ioport range 0x73b0-0x73bb has been reserved
[ 0.097089] system 00:01: ioport range 0x73c0-0x73df has been reserved
[ 0.097099] system 00:01: ioport range 0x77b0-0x77bb has been reserved
[ 0.097109] system 00:01: ioport range 0x77c0-0x77df has been reserved
[ 0.097119] system 00:01: ioport range 0x7bb0-0x7bbb has been reserved
[ 0.097129] system 00:01: ioport range 0x7bc0-0x7bdf has been reserved
[ 0.097141] system 00:01: ioport range 0x7fb0-0x7fbb has been reserved
[ 0.097151] system 00:01: ioport range 0x7fc0-0x7fdf has been reserved
[ 0.097161] system 00:01: ioport range 0x83b0-0x83bb has been reserved
[ 0.097171] system 00:01: ioport range 0x83c0-0x83df has been reserved
[ 0.097181] system 00:01: ioport range 0x87b0-0x87bb has been reserved
[ 0.097192] system 00:01: ioport range 0x87c0-0x87df has been reserved
[ 0.097202] system 00:01: ioport range 0x8bb0-0x8bbb has been reserved
[ 0.097213] system 00:01: ioport range 0x8bc0-0x8bdf has been reserved
[ 0.097224] system 00:01: ioport range 0x8fb0-0x8fbb has been reserved
[ 0.097234] system 00:01: ioport range 0x8fc0-0x8fdf has been reserved
[ 0.097245] system 00:01: ioport range 0x93b0-0x93bb has been reserved
[ 0.097255] system 00:01: ioport range 0x93c0-0x93df has been reserved
[ 0.097266] system 00:01: ioport range 0x97b0-0x97bb has been reserved
[ 0.097277] system 00:01: ioport range 0x97c0-0x97df has been reserved
[ 0.097287] system 00:01: ioport range 0x9bb0-0x9bbb has been reserved
[ 0.097298] system 00:01: ioport range 0x9bc0-0x9bdf has been reserved
[ 0.097308] system 00:01: ioport range 0x9fb0-0x9fbb has been reserved
[ 0.097319] system 00:01: ioport range 0x9fc0-0x9fdf has been reserved
[ 0.097336] system 00:01: ioport range 0xb3b0-0xb3bb has been reserved
[ 0.097347] system 00:01: ioport range 0xb3c0-0xb3df has been reserved
[ 0.097357] system 00:01: ioport range 0xb7b0-0xb7bb has been reserved
[ 0.097368] system 00:01: ioport range 0xb7c0-0xb7df has been reserved
[ 0.097379] system 00:01: ioport range 0xbbb0-0xbbbb has been reserved
[ 0.097390] system 00:01: ioport range 0xbbc0-0xbbdf has been reserved
[ 0.097402] system 00:01: ioport range 0xbfb0-0xbfbb has been reserved
[ 0.097413] system 00:01: ioport range 0xbfc0-0xbfdf has been reserved
[ 0.097423] system 00:01: ioport range 0xc3b0-0xc3bb has been reserved
[ 0.097434] system 00:01: ioport range 0xc3c0-0xc3df has been reserved
[ 0.097445] system 00:01: ioport range 0xc7b0-0xc7bb has been reserved
[ 0.097456] system 00:01: ioport range 0xc7c0-0xc7df has been reserved
[ 0.097467] system 00:01: ioport range 0xcbb0-0xcbbb has been reserved
[ 0.097478] system 00:01: ioport range 0xcbc0-0xcbdf has been reserved
[ 0.097490] system 00:01: ioport range 0xcfb0-0xcfbb has been reserved
[ 0.097501] system 00:01: ioport range 0xcfc0-0xcfdf has been reserved
[ 0.097512] system 00:01: ioport range 0xd3b0-0xd3bb has been reserved
[ 0.097523] system 00:01: ioport range 0xd3c0-0xd3df has been reserved
[ 0.097535] system 00:01: ioport range 0xd7b0-0xd7bb has been reserved
[ 0.097546] system 00:01: ioport range 0xd7c0-0xd7df has been reserved
[ 0.097557] system 00:01: ioport range 0xdbb0-0xdbbb has been reserved
[ 0.097568] system 00:01: ioport range 0xdbc0-0xdbdf has been reserved
[ 0.097579] system 00:01: ioport range 0xdfb0-0xdfbb has been reserved
[ 0.097591] system 00:01: ioport range 0xdfc0-0xdfdf has been reserved
[ 0.097602] system 00:01: ioport range 0xe3b0-0xe3bb has been reserved
[ 0.097613] system 00:01: ioport range 0xe3c0-0xe3df has been reserved
[ 0.097625] system 00:01: ioport range 0xe7b0-0xe7bb has been reserved
[ 0.097636] system 00:01: ioport range 0xe7c0-0xe7df has been reserved
[ 0.097647] system 00:01: ioport range 0xebb0-0xebbb has been reserved
[ 0.097659] system 00:01: ioport range 0xebc0-0xebdf has been reserved
[ 0.097671] system 00:01: ioport range 0xefb0-0xefbb has been reserved
[ 0.097682] system 00:01: ioport range 0xefc0-0xefdf has been reserved
[ 0.097694] system 00:01: ioport range 0xf3b0-0xf3bb has been reserved
[ 0.097705] system 00:01: ioport range 0xf3c0-0xf3df has been reserved
[ 0.097717] system 00:01: ioport range 0xf7b0-0xf7bb has been reserved
[ 0.097729] system 00:01: ioport range 0xf7c0-0xf7df has been reserved
[ 0.097741] system 00:01: ioport range 0xfbb0-0xfbbb has been reserved
[ 0.097767] system 00:01: ioport range 0xfbc0-0xfbdf has been reserved
[ 0.097782] system 00:01: ioport range 0xffb0-0xffbb has been reserved
[ 0.097794] system 00:01: ioport range 0xffc0-0xffdf has been reserved
[ 0.097817] system 00:05: ioport range 0x600-0x60f has been reserved
[ 0.097826] system 00:05: ioport range 0x700-0x70f has been reserved
[ 0.097836] system 00:05: ioport range 0x8000-0x807f has been reserved
[ 0.097846] system 00:05: ioport range 0x8080-0x80bf has been reserved
[ 0.097855] system 00:05: ioport range 0x800-0x803 has been reserved
[ 0.097865] system 00:05: ioport range 0x170-0x177 has been reserved
[ 0.097874] system 00:05: ioport range 0x338-0x33f has been reserved
[ 0.097884] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.133129] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.133139] pci 0000:02:03.0: IO window: 0x00a400-0x00a4ff
[ 0.133148] pci 0000:02:03.0: IO window: 0x00a800-0x00a8ff
[ 0.133158] pci 0000:02:03.0: PREFETCH window: 0x18000000-0x1bffffff
[ 0.133167] pci 0000:02:03.0: MEM window: 0x24000000-0x27ffffff
[ 0.133177] pci 0000:02:07.0: CardBus bridge, secondary bus 0000:04
[ 0.133184] pci 0000:02:07.0: IO window: 0x00ac00-0x00acff
[ 0.133193] pci 0000:02:07.0: IO window: 0x001000-0x0010ff
[ 0.133202] pci 0000:02:07.0: PREFETCH window: 0x1c000000-0x1fffffff
[ 0.133212] pci 0000:02:07.0: MEM window: 0x28000000-0x2bffffff
[ 0.133221] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.133230] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.133240] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
[ 0.133251] pci 0000:00:1e.0: PREFETCH window: 0x18000000-0x21ffffff
[ 0.133278] pci 0000:00:1e.0: setting latency timer to 64
[ 0.133716] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.133724] PCI: setting IRQ 10 as level-triggered
[ 0.133736] pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 0.133746] pci 0000:02:03.0: setting latency timer to 64
[ 0.133762] pci 0000:02:07.0: enabling device (0000 -> 0003)
[ 0.134132] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 0.134143] pci 0000:02:07.0: PCI INT A -> Link[LNKE] -> GSI 10
(level, low) -> IRQ 10
[ 0.134155] pci 0000:02:07.0: setting latency timer to 64
[ 0.134169] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.134178] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.134187] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.134196] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.134205] pci_bus 0000:02: resource 2 pref mem [0x18000000-0x21ffffff]
[ 0.134213] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.134221] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.134230] pci_bus 0000:03: resource 0 io: [0xa400-0xa4ff]
[ 0.134238] pci_bus 0000:03: resource 1 io: [0xa800-0xa8ff]
[ 0.134246] pci_bus 0000:03: resource 2 pref mem [0x18000000-0x1bffffff]
[ 0.134255] pci_bus 0000:03: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.134264] pci_bus 0000:04: resource 0 io: [0xac00-0xacff]
[ 0.134272] pci_bus 0000:04: resource 1 io: [0x1000-0x10ff]
[ 0.134280] pci_bus 0000:04: resource 2 pref mem [0x1c000000-0x1fffffff]
[ 0.134289] pci_bus 0000:04: resource 3 mem: [0x28000000-0x2bffffff]
[ 0.134423] NET: Registered protocol family 2
[ 0.134708] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.135623] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.135965] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.136323] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.136331] TCP reno registered
[ 0.136591] NET: Registered protocol family 1
[ 0.136657] pci 0000:00:02.0: Boot video device
[ 0.136919] Unpacking initramfs...
[ 0.789360] Freeing initrd memory: 8230k freed
[ 0.813653] Simple Boot Flag at 0x36 set to 0x1
[ 0.814446] audit: initializing netlink socket (disabled)
[ 0.814493] type=2000 audit(1282161826.814:1): initialized
[ 0.826662] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.831550] VFS: Disk quotas dquot_6.5.2
[ 0.831740] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.831977] msgmni has been set to 733
[ 0.832538] alg: No test for stdrng (krng)
[ 0.832623] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.832632] io scheduler noop registered
[ 0.832638] io scheduler anticipatory registered
[ 0.832645] io scheduler deadline registered
[ 0.832770] io scheduler cfq registered (default)
[ 0.833262] isapnp: Scanning for PnP cards...
[ 1.185999] isapnp: No Plug & Play device found
[ 1.190474] Linux agpgart interface v0.103
[ 1.190671] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.191693] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.193524] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.193739] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.194983] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.194999] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 1.195014] serial 0000:00:1f.6: PCI INT B disabled
[ 1.195236] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.197476] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.198863] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.198887] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.198971] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.199040] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.199108] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.199392] mice: PS/2 mouse device common for all mice
[ 1.199614] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.199646] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 1.199679] cpuidle: using governor ladder
[ 1.199686] cpuidle: using governor menu
[ 1.199699] No iBFT detected.
[ 1.201000] TCP cubic registered
[ 1.201467] NET: Registered protocol family 10
[ 1.202960] lo: Disabled Privacy Extensions
[ 1.204061] Mobile IPv6
[ 1.204070] NET: Registered protocol family 17
[ 1.204122] Using IPI No-Shortcut mode
[ 1.204321] PM: Resume from disk failed.
[ 1.204350] registered taskstats version 1
[ 1.204817] rtc_cmos 00:02: setting system clock to 2010-08-18
20:03:47 UTC (1282161827)
[ 1.204921] Initalizing network drop monitor service
[ 1.204989] Freeing unused kernel memory: 368k freed
[ 1.205584] Write protecting the kernel text: 2500k
[ 1.205644] Write protecting the kernel read-only data: 920k
[ 1.224450] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.252335] udev: starting version 160
[ 1.865435] usbcore: registered new interface driver usbfs
[ 1.865841] usbcore: registered new interface driver hub
[ 1.866234] usbcore: registered new device driver usb
[ 1.882831] SCSI subsystem initialized
[ 1.912234] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.923520] Floppy drive(s): fd0 is 1.44M
[ 1.930483] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.930636] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 1.930664] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.930673] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.930746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 1.930793] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00008c80
[ 1.930926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.930935] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.930943] usb usb1: Product: UHCI Host Controller
[ 1.930950] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.930957] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.931405] usb usb1: configuration #1 chosen from 1 choice
[ 1.931586] hub 1-0:1.0: USB hub found
[ 1.931609] hub 1-0:1.0: 2 ports detected
[ 1.932291] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.932300] PCI: setting IRQ 11 as level-triggered
[ 1.932311] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 1.932334] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.932342] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.932368] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 1.932410] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00008ca0
[ 1.932509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.932518] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.932526] usb usb2: Product: UHCI Host Controller
[ 1.932533] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.932539] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.932866] usb usb2: configuration #1 chosen from 1 choice
[ 1.933038] hub 2-0:1.0: USB hub found
[ 1.933062] hub 2-0:1.0: 2 ports detected
[ 1.933580] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.933592] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 1.933611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.933619] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.933649] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 1.933686] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00008cc0
[ 1.933787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.933796] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.933804] usb usb3: Product: UHCI Host Controller
[ 1.933810] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.933817] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.934112] usb usb3: configuration #1 chosen from 1 choice
[ 1.934282] hub 3-0:1.0: USB hub found
[ 1.934302] hub 3-0:1.0: 2 ports detected
[ 1.951307] FDC 0 is a National Semiconductor PC87306
[ 1.955516] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.955543] ACPI: Thermal Zone [THRM] (47 C)
[ 1.972456] 3c59x 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 1.972500] 3c59x: Donald Becker and others.
[ 1.972519] 0000:02:05.0: 3Com PCI 3c905C Tornado at d8220800.
[ 2.085568] libata version 3.00 loaded.
[ 2.104782] firewire_ohci 0000:02:03.1: PCI INT B -> Link[LNKC] ->
GSI 11 (level, low) -> IRQ 11
[ 2.126269] ata_piix 0000:00:1f.1: version 2.13
[ 2.126303] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.126324] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.126428] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.126609] scsi0 : ata_piix
[ 2.127058] scsi1 : ata_piix
[ 2.128563] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9000
irq 14
[ 2.128572] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9008
irq 15
[ 2.129450] ata2: port disabled. ignoring.
[ 2.184033] firewire_ohci: Added fw-ohci device 0000:02:03.1, OHCI
version 1.0
[ 2.292631] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA72A, max UDMA/100
[ 2.292641] ata1.00: 58605120 sectors, multi 16: LBA
[ 2.308549] ata1.00: configured for UDMA/100
[ 2.308869] scsi 0:0:0:0: Direct-Access ATA IC25N030ATCS04-0
CA3O PQ: 0 ANSI: 5
[ 2.345584] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0
GB/27.9 GiB)
[ 2.345796] sd 0:0:0:0: [sda] Write Protect is off
[ 2.345806] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.345893] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.346365] sda: sda1 sda2 < sda5 >
[ 2.389260] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.684285] firewire_core: created device fw0: GUID 00065b80020f19d9,
S400
[ 2.890857] PM: Starting manual resume from disk
[ 2.890872] PM: Resume from partition 8:5
[ 2.890877] PM: Checking hibernation image.
[ 2.919774] PM: Error -22 checking image file
[ 2.919780] PM: Resume from disk failed.
[ 3.034618] kjournald starting. Commit interval 5 seconds
[ 3.034648] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.905257] udev: starting version 160
[ 6.997493] Marking TSC unstable due to TSC halts in idle
[ 7.002152] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input1
[ 7.002176] ACPI: Video Device [GRFX] (multi-head: yes rom: yes
post: no)
[ 7.005524] processor LNXCPU:00: registered as cooling_device0
[ 7.012511] Switching to clocksource acpi_pm
[ 7.075236] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.075267] ACPI: Power Button [PWRB]
[ 7.076488] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.076700] ACPI: Lid Switch [LID0]
[ 7.077073] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 7.077089] ACPI: Sleep Button [SLPB]
[ 7.077394] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.077407] ACPI: Power Button [PWRF]
[ 7.107411] ACPI: Battery Slot [BAT1] (battery present)
[ 7.466273] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 7.478357] ACPI: AC Adapter [ADP1] (on-line)
[ 7.534726] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI
10 (level, low) -> IRQ 10
[ 7.572075] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.712795] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.894400] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.146522] [drm] Initialized drm 1.1.0 20060810
[ 8.168415] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1,
caps: 0x804713/0x0/0x0
[ 8.211183] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input7
[ 8.543048] intel_rng: FWH not detected
[ 8.712955] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 8.712970] i915 0000:00:02.0: setting latency timer to 64
[ 8.726477] [drm] set up 15M of stolen space
[ 8.749198] [drm] initialized overlay support
[ 8.829212] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:0122]
[ 8.972462] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10
[ 8.972473] yenta_cardbus 0000:02:03.0: Socket status: 30000410
[ 8.972494] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 8.972506] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa000-0xafff: clean.
[ 8.973734] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 8.973744] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 8.984473] yenta_cardbus 0000:02:07.0: CardBus bridge found [12a3:ab01]
[ 8.984497] yenta_cardbus 0000:02:07.0: Enabling burst memory read
transactions
[ 8.984509] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC
interrupts to PCI
[ 8.984516] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI
[ 8.984526] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01000002, devctl 0x60
[ 9.549122] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0000, PCI irq 10
[ 9.549133] yenta_cardbus 0000:02:07.0: Socket status: 30000010
[ 9.549144] pci_bus 0000:02: Raising subordinate bus# of parent bus
(#02) from #04 to #07
[ 9.549170] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 9.549181] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa000-0xafff: clean.
[ 9.550432] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 9.550443] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 9.821898] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: clean.
[ 9.822914] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 9.823412] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
[ 9.823841] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: clean.
[ 9.824736] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
[ 9.958458] Console: switching to colour frame buffer device 128x48
[ 9.973250] fb0: inteldrmfb frame buffer device
[ 9.973255] registered panic notifier
[ 9.973496] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 9.980316] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card
inserted into slot 0
[ 9.980758] pcmcia_socket pcmcia_socket0: cs: memory probe
0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 9.990147] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 10.188063] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card
inserted into slot 1
[ 10.250123] pcmcia_socket pcmcia_socket1: cs: memory probe
0xe0200000-0xe02fffff: excluding 0xe0200000-0xe021ffff
[ 10.258148] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 10.269917] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x100-0x3af: clean.
[ 10.271267] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.271768] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x820-0x8ff: clean.
[ 10.272257] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xc00-0xcf7: clean.
[ 10.273032] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa00-0xaff: clean.
[ 10.672144] cfg80211: Using static regulatory domain info
[ 10.672154] cfg80211: Regulatory domain: US
[ 10.672161] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 10.672172] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi,
2700 mBm)
[ 10.672182] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 10.672193] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 10.672203] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 10.672213] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 10.672224] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi,
3000 mBm)
[ 10.672950] cfg80211: Calling CRDA for country: US
[ 10.800520] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] ->
GSI 10 (level, low) -> IRQ 10
[ 10.800565] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 10.826081] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.826122] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 11.062658] orinoco 0.15 (David Gibson
<hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 11.315085] orinoco_cs 0.15 (David Gibson
<hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 11.394752] orinoco_cs 0.0: Hardware identity 0001:0001:0004:0000
[ 11.394861] orinoco_cs 0.0: Station identity 001f:0001:0006:0010
[ 11.394871] orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.16
[ 11.404430] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 11.680339] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 11.689780] orinoco_cs 0.0: Cannot find firmware agere_sta_fw.bin
[ 11.690039] orinoco_cs 0.0: Hardware identity 0001:0001:0004:0000
[ 11.690147] orinoco_cs 0.0: Station identity 001f:0001:0006:0010
[ 11.690157] orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.16
[ 11.690164] orinoco_cs 0.0: Ad-hoc demo mode supported
[ 11.690170] orinoco_cs 0.0: IEEE standard IBSS ad-hoc mode supported
[ 11.690177] orinoco_cs 0.0: WEP supported, 104-bit key
[ 11.776033] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.776153] orinoco_cs 1.0: Station identity 001f:0001:0008:000a
[ 11.776163] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10
[ 11.801781] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 11.808936] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 11.818933] orinoco_cs 1.0: Cannot find firmware agere_sta_fw.bin
[ 11.819195] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.819300] orinoco_cs 1.0: Station identity 001f:0001:0008:000a
[ 11.819310] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10
[ 11.819317] orinoco_cs 1.0: Ad-hoc demo mode supported
[ 11.819323] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported
[ 11.819330] orinoco_cs 1.0: WEP supported, 104-bit key
[ 11.867823] udev: renamed network interface eth1 to eth2
[ 11.905993] udev: renamed network interface eth2_rename to eth1
[ 11.964129] intel8x0_measure_ac97_clock: measured 55368 usecs (2660
samples)
[ 11.964139] intel8x0: clocking to 48000
[ 12.930745] Adding 1100412k swap on /dev/sda5. Priority:-1 extents:1
across:1100412k
[ 13.350453] EXT3 FS on sda1, internal journal
[ 13.586196] loop: module loaded
[ 16.201439] fuse init (API version 7.13)
[ 18.379989] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 22.229349] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 22.236189] eth0: setting half-duplex.
[ 22.236346] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.247738] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 22.414794] eth2: New link status: Connected (0001)
[ 22.414910] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 22.559547] eth1: New link status: Connected (0001)
[ 22.559674] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.740875] eth2: New link status: Disconnected (0002)
[ 22.991862] eth1: New link status: Disconnected (0002)
[ 23.011967] eth2: New link status: Connected (0001)
[ 23.027821] eth2: New link status: Disconnected (0002)
[ 23.293690] eth2: New link status: Connected (0001)
[ 23.297911] eth2: New link status: Disconnected (0002)
[ 23.379166] eth1: New link status: Connected (0001)
[ 23.385887] eth1: New link status: Disconnected (0002)
[ 23.610038] eth2: New link status: Connected (0001)
[ 23.614174] eth2: New link status: Disconnected (0002)
[ 23.686038] eth1: New link status: Connected (0001)
[ 23.692508] eth1: New link status: Disconnected (0002)
[ 23.927280] eth2: New link status: Connected (0001)
[ 23.934637] eth2: New link status: Disconnected (0002)
[ 23.961183] hermes @ 0001a080: Timeout waiting for command 0x0002
completion.
[ 23.961183] eth2: Unable to disable port while reconfiguring card
[ 23.961183] eth2: Resetting instead...
[ 24.190165] eth1: New link status: Connected (0001)
[ 24.473185] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 24.479539] orinoco_cs 0.0: Cannot find firmware agere_sta_fw.bin
[ 24.485057] eth2: orinoco_reset: Error -2 re-initializing firmware
[ 24.490516] eth2: Device has been disabled!
[ 24.514362] eth1: New link status: Disconnected (0002)
[ 24.696441] apm: BIOS not found.
[ 24.812741] eth1: New link status: Connected (0001)
[ 24.817456] eth1: New link status: Disconnected (0002)
[ 25.119773] eth1: New link status: Connected (0001)
[ 25.124583] eth1: New link status: Disconnected (0002)
[ 25.426752] eth1: New link status: Connected (0001)
[ 25.431512] eth1: New link status: Disconnected (0002)
[ 25.734197] eth1: New link status: Connected (0001)
[ 25.739010] eth1: New link status: Disconnected (0002)
[ 25.939091] eth1: New link status: Connected (0001)
[ 25.945610] eth1: New link status: Disconnected (0002)
[ 26.139941] Bluetooth: Core ver 2.15
[ 26.140451] NET: Registered protocol family 31
[ 26.140457] Bluetooth: HCI device and connection manager initialized
[ 26.140465] Bluetooth: HCI socket layer initialized
[ 26.245910] eth1: New link status: Connected (0001)
[ 26.250779] eth1: New link status: Disconnected (0002)
[ 26.553179] eth1: New link status: Connected (0001)
[ 26.558004] eth1: New link status: Disconnected (0002)
[ 26.596481] Bluetooth: L2CAP ver 2.14
[ 26.596490] Bluetooth: L2CAP socket layer initialized
[ 26.670530] Bluetooth: RFCOMM TTY layer initialized
[ 26.670543] Bluetooth: RFCOMM socket layer initialized
[ 26.670550] Bluetooth: RFCOMM ver 1.11
[ 26.860665] eth1: New link status: Connected (0001)
[ 26.866909] eth1: New link status: Disconnected (0002)
[ 26.942437] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.942446] Bluetooth: BNEP filters: protocol multicast
[ 27.065353] eth1: New link status: Connected (0001)
[ 27.077455] eth1: New link status: Disconnected (0002)
[ 27.089621] Bridge firewalling registered
[ 27.195861] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.195868] Bluetooth: SCO socket layer initialized
[ 27.372586] eth1: New link status: Connected (0001)
[ 27.377331] eth1: New link status: Disconnected (0002)
[ 27.679492] eth1: New link status: Connected (0001)
[ 27.684490] eth1: New link status: Disconnected (0002)
[ 27.884624] eth1: New link status: Connected (0001)
[ 27.891225] eth1: New link status: Disconnected (0002)
[ 28.089257] eth1: New link status: Connected (0001)
[ 28.095490] eth1: New link status: Disconnected (0002)
[ 28.396607] eth1: New link status: Connected (0001)
[ 28.401525] eth1: New link status: Disconnected (0002)
[ 28.703401] eth1: New link status: Connected (0001)
[ 28.708411] eth1: New link status: Disconnected (0002)
[ 28.908205] eth1: New link status: Connected (0001)
[ 28.913023] eth1: New link status: Disconnected (0002)
[ 28.973861] lp: driver loaded but no devices found
[ 29.050632] ppdev: user-space parallel port driver
[ 29.113227] eth1: New link status: Connected (0001)
[ 29.118105] eth1: New link status: Disconnected (0002)
Reply to: