Bug#593432: Black screen with kms and i915
Package: linux-2.6
Version: 2.6.32-20
Severity: normal
When booting the screen goes black at the moment the frame buffer is
switched on.
Booting continues until the 'login prompt', but the screen remains black.
When
switching to a text screen, the screen gets darker for a second, but no
text login
appears. I can then, however, login blind and the machine works. For
example,
I can reboot it when logging in as root and calling 'shutdown' (all blind,
of course).
The problem goes away when adding the line
options i915 modeset=0
to the file /etc/modprobe.d/i915-kms.conf, so I guess it is a kms problem.
If I wasn't a newbie I'd mark this bug as 'important', because it left a
freshly installed machine more or less completely unusable.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:38:27 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=2b4fbfbd-8cd8-4da5-b90c-7b281a41435b ro quiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-20)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug
12 13:38:27 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000176b7000 (usable)
[ 0.000000] BIOS-e820: 00000000176b7000 - 00000000176e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000176e0000 - 00000000176f0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000176f0000 - 0000000017700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017700000 - 0000000017780000 (usable)
[ 0.000000] BIOS-e820: 0000000017780000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x17780 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 017F80000 mask FFFF80000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000017780000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017400000 page 2M
[ 0.000000] 0017400000 - 0017780000 page 4k
[ 0.000000] kernel direct mapping tables up to 17780000 @ 10000-16000
[ 0.000000] RAMDISK: 1112f000 - 11948f1e
[ 0.000000] ACPI: RSDP 000f6300 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 176ea420 00034 (v01 PTLTD RSDT 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 176efdf3 00074 (v01 DELL X200 06040000 PTL
0000004B)
[ 0.000000] ACPI: DSDT 176ea454 0599F (v01 DELL X200 06040000
MSFT 0100000D)
[ 0.000000] ACPI: FACS 176fcfc0 00040
[ 0.000000] ACPI: SSDT 176efe67 000BC (v01 PTLTD ACPICST1 06040000
LTP 00000001)
[ 0.000000] ACPI: SSDT 176eff23 000B5 (v01 PTLTD ACPIPST1 06040000
LTP 00000001)
[ 0.000000] ACPI: BOOT 176effd8 00028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 375MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17780000
[ 0.000000] low ram: 0 - 17780000
[ 0.000000] node 0 low ram: 00000000 - 17780000
[ 0.000000] node 0 bootmap 00012000 - 00014ef0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017780000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c6b94] TEXT DATA BSS ==>
[0001000000 - 00014c6b94]
[ 0.000000] #4 [001112f000 - 0011948f1e] RAMDISK ==>
[001112f000 - 0011948f1e]
[ 0.000000] #5 [000009e800 - 0000100000] BIOS reserved ==>
[000009e800 - 0000100000]
[ 0.000000] #6 [00014c7000 - 00014cd148] BRK ==>
[00014c7000 - 00014cd148]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000015000] BOOTMAP ==>
[0000012000 - 0000015000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017780
[ 0.000000] HighMem 0x00017780 -> 0x00017780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000176b7
[ 0.000000] 0: 0x00017700 -> 0x00017780
[ 0.000000] On node 0 totalpages: 95941
[ 0.000000] free_area_init_node: node 0, pgdat c13b26e0, node_mem_map
c14cf200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 719 pages used for memmap
[ 0.000000] Normal zone: 91240 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 -
00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000176b7000 -
00000000176e0000
[ 0.000000] PM: Registered nosave memory: 00000000176e0000 -
00000000176f0000
[ 0.000000] PM: Registered nosave memory: 00000000176f0000 -
0000000017700000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap:
18000000:e7800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016
u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 95190
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=2b4fbfbd-8cd8-4da5-b90c-7b281a41435b ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 366496k/384512k available (2496k kernel code,
16720k reserved, 1328k data, 368k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd7f80000 - 0xff3fe000 ( 628 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd7780000 ( 375 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc1419000 ( 368 kB)
[ 0.000000] .data : 0xc1270005 - 0xc13bc260 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270005 (2496 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 797.326 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1594.65 BogoMIPS (lpj=3189304)
[ 0.004051] Security Framework initialized
[ 0.004065] SELinux: Disabled at boot.
[ 0.004084] Mount-cache hash table entries: 512
[ 0.004373] Initializing cgroup subsys ns
[ 0.004383] Initializing cgroup subsys cpuacct
[ 0.004395] Initializing cgroup subsys devices
[ 0.004402] Initializing cgroup subsys freezer
[ 0.004408] Initializing cgroup subsys net_cls
[ 0.004464] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004472] CPU: L2 cache: 512K
[ 0.004483] mce: CPU supports 5 MCE banks
[ 0.004516] Performance Events:
[ 0.004522] no APIC, boot with the "lapic" boot parameter to
force-enable it.
[ 0.004528] no hardware sampling interrupt available.
[ 0.004534] p6 PMU driver.
[ 0.004564] ... version: 0
[ 0.004570] ... bit width: 32
[ 0.004575] ... generic registers: 2
[ 0.004580] ... value mask: 00000000ffffffff
[ 0.004586] ... max period: 000000007fffffff
[ 0.004592] ... fixed-purpose events: 0
[ 0.004597] ... event mask: 0000000000000003
[ 0.004607] Checking 'hlt' instruction... OK.
[ 0.020706] SMP alternatives: switching to UP code
[ 0.028499] Freeing SMP alternatives: 13k freed
[ 0.028517] ACPI: Core revision 20090903
[ 0.041603] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.043488] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.043499] weird, boot CPU (#0) not listed by the BIOS.
[ 0.043505] SMP motherboard not detected.
[ 0.043511] Local APIC not detected. Using dummy APIC emulation.
[ 0.043517] SMP disabled
[ 0.043974] Brought up 1 CPUs
[ 0.043982] Total of 1 processors activated (1594.65 BogoMIPS).
[ 0.044058] CPU0 attaching NULL sched-domain.
[ 0.044404] devtmpfs: initialized
[ 0.045648] regulator: core version 0.5
[ 0.045791] NET: Registered protocol family 16
[ 0.046048] ACPI: bus type pci registered
[ 0.048126] PCI: PCI BIOS revision 2.10 entry at 0xfd9a8, last bus=4
[ 0.048133] PCI: Using configuration type 1 for base access
[ 0.049239] bio: create slab <bio-0> at 0
[ 0.050590] ACPI: EC: Look up EC in DSDT
[ 0.058918] ACPI: Interpreter enabled
[ 0.058918] ACPI: (supports S0 S3 S4 S5)
[ 0.058918] ACPI: Using PIC for interrupt routing
[ 0.069585] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.069713] ACPI: Power Resource [PFAN] (on)
[ 0.070686] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.072252] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.072403] pci 0000:00:02.0: reg 10 32bit mmio pref:
[0xe8000000-0xefffffff]
[ 0.072416] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[ 0.072449] pci 0000:00:02.0: supports D1
[ 0.072481] pci 0000:00:02.1: reg 10 32bit mmio pref:
[0xf0000000-0xf7ffffff]
[ 0.072493] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[ 0.072526] pci 0000:00:02.1: supports D1
[ 0.072612] pci 0000:00:1d.0: reg 20 io port: [0x8c80-0x8c9f]
[ 0.072678] pci 0000:00:1d.1: reg 20 io port: [0x8ca0-0x8cbf]
[ 0.072744] pci 0000:00:1d.2: reg 20 io port: [0x8cc0-0x8cdf]
[ 0.072873] pci 0000:00:1f.0: quirk: region 8000-807f claimed by ICH4
ACPI/GPIO/TCO
[ 0.072883] pci 0000:00:1f.0: quirk: region 8080-80bf claimed by ICH4 GPIO
[ 0.072920] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.072932] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.072945] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.072957] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.072969] pci 0000:00:1f.1: reg 20 io port: [0x9000-0x900f]
[ 0.072982] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.073046] pci 0000:00:1f.3: reg 20 io port: [0x8ce0-0x8cff]
[ 0.073096] pci 0000:00:1f.5: reg 10 io port: [0x8400-0x84ff]
[ 0.073109] pci 0000:00:1f.5: reg 14 io port: [0x80c0-0x80ff]
[ 0.073171] pci 0000:00:1f.6: reg 10 io port: [0x8800-0x88ff]
[ 0.073184] pci 0000:00:1f.6: reg 14 io port: [0x8c00-0x8c7f]
[ 0.073267] pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.073291] pci 0000:02:03.0: supports D1 D2
[ 0.073298] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073308] pci 0000:02:03.0: PME# disabled
[ 0.073349] pci 0000:02:03.1: reg 10 32bit mmio: [0xe0200000-0xe02007ff]
[ 0.073397] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
[ 0.073406] pci 0000:02:03.1: PME# disabled
[ 0.073462] pci 0000:02:05.0: reg 10 io port: [0xa000-0xa07f]
[ 0.073476] pci 0000:02:05.0: reg 14 32bit mmio: [0xe0200800-0xe020087f]
[ 0.073504] pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.073528] pci 0000:02:05.0: supports D1 D2
[ 0.073536] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073544] pci 0000:02:05.0: PME# disabled
[ 0.073592] pci 0000:02:07.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.073617] pci 0000:02:07.0: supports D1 D2
[ 0.073624] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073633] pci 0000:02:07.0: PME# disabled
[ 0.073676] pci 0000:00:1e.0: transparent bridge
[ 0.073685] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.073695] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.073749] pci_bus 0000:00: on NUMA node 0
[ 0.073763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.074106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.082326] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.082702] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.083084] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[ 0.083464] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.083842] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.084236] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.084572] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.084911] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.085183] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.085208] vgaarb: loaded
[ 0.085427] PCI: Using ACPI for IRQ routing
[ 0.085833] Switching to clocksource tsc
[ 0.088001] pnp: PnP ACPI init
[ 0.088001] ACPI: bus type pnp registered
[ 0.090690] pnp 00:01: io resource (0xa3b0-0xa3bb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090704] pnp 00:01: io resource (0xa3c0-0xa3df) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090716] pnp 00:01: io resource (0xa7b0-0xa7bb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090728] pnp 00:01: io resource (0xa7c0-0xa7df) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090740] pnp 00:01: io resource (0xabb0-0xabbb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090751] pnp 00:01: io resource (0xabc0-0xabdf) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090763] pnp 00:01: io resource (0xafb0-0xafbb) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.090775] pnp 00:01: io resource (0xafc0-0xafdf) overlaps
0000:00:1e.0 BAR 13 (0xa000-0xafff), disabling
[ 0.096079] pnp: PnP ACPI: found 10 devices
[ 0.096087] ACPI: ACPI bus type pnp unregistered
[ 0.096098] PnPBIOS: Disabled by ACPI PNP
[ 0.096132] system 00:01: ioport range 0x7b0-0x7bb has been reserved
[ 0.096141] system 00:01: ioport range 0x7c0-0x7df has been reserved
[ 0.096151] system 00:01: ioport range 0xbb0-0xbbb has been reserved
[ 0.096160] system 00:01: ioport range 0xbc0-0xbdf has been reserved
[ 0.096169] system 00:01: ioport range 0xfb0-0xfbb has been reserved
[ 0.096179] system 00:01: ioport range 0xfc0-0xfdf has been reserved
[ 0.096188] system 00:01: ioport range 0x13b0-0x13bb has been reserved
[ 0.096197] system 00:01: ioport range 0x13c0-0x13df has been reserved
[ 0.096206] system 00:01: ioport range 0x17b0-0x17bb has been reserved
[ 0.096216] system 00:01: ioport range 0x17c0-0x17df has been reserved
[ 0.096225] system 00:01: ioport range 0x1bb0-0x1bbb has been reserved
[ 0.096234] system 00:01: ioport range 0x1bc0-0x1bdf has been reserved
[ 0.096244] system 00:01: ioport range 0x1fb0-0x1fbb has been reserved
[ 0.096253] system 00:01: ioport range 0x1fc0-0x1fdf has been reserved
[ 0.096263] system 00:01: ioport range 0x23b0-0x23bb has been reserved
[ 0.096272] system 00:01: ioport range 0x23c0-0x23df has been reserved
[ 0.096281] system 00:01: ioport range 0x27b0-0x27bb has been reserved
[ 0.096291] system 00:01: ioport range 0x27c0-0x27df has been reserved
[ 0.096300] system 00:01: ioport range 0x2bb0-0x2bbb has been reserved
[ 0.096310] system 00:01: ioport range 0x2bc0-0x2bdf has been reserved
[ 0.096319] system 00:01: ioport range 0x2fb0-0x2fbb has been reserved
[ 0.096329] system 00:01: ioport range 0x2fc0-0x2fdf has been reserved
[ 0.096339] system 00:01: ioport range 0x33b0-0x33bb has been reserved
[ 0.096348] system 00:01: ioport range 0x33c0-0x33df has been reserved
[ 0.096358] system 00:01: ioport range 0x37b0-0x37bb has been reserved
[ 0.096367] system 00:01: ioport range 0x37c0-0x37df has been reserved
[ 0.096377] system 00:01: ioport range 0x3bb0-0x3bbb has been reserved
[ 0.096386] system 00:01: ioport range 0x3bc0-0x3bdf has been reserved
[ 0.096396] system 00:01: ioport range 0x3fb0-0x3fbb has been reserved
[ 0.096406] system 00:01: ioport range 0x3fc0-0x3fdf has been reserved
[ 0.096415] system 00:01: ioport range 0x43b0-0x43bb has been reserved
[ 0.096425] system 00:01: ioport range 0x43c0-0x43df has been reserved
[ 0.096435] system 00:01: ioport range 0x47b0-0x47bb has been reserved
[ 0.096444] system 00:01: ioport range 0x47c0-0x47df has been reserved
[ 0.096454] system 00:01: ioport range 0x4bb0-0x4bbb has been reserved
[ 0.096464] system 00:01: ioport range 0x4bc0-0x4bdf has been reserved
[ 0.096474] system 00:01: ioport range 0x4fb0-0x4fbb has been reserved
[ 0.096484] system 00:01: ioport range 0x4fc0-0x4fdf has been reserved
[ 0.096493] system 00:01: ioport range 0x53b0-0x53bb has been reserved
[ 0.096503] system 00:01: ioport range 0x53c0-0x53df has been reserved
[ 0.096513] system 00:01: ioport range 0x57b0-0x57bb has been reserved
[ 0.096523] system 00:01: ioport range 0x57c0-0x57df has been reserved
[ 0.096533] system 00:01: ioport range 0x5bb0-0x5bbb has been reserved
[ 0.096543] system 00:01: ioport range 0x5bc0-0x5bdf has been reserved
[ 0.096552] system 00:01: ioport range 0x5fb0-0x5fbb has been reserved
[ 0.096562] system 00:01: ioport range 0x5fc0-0x5fdf has been reserved
[ 0.096572] system 00:01: ioport range 0x63b0-0x63bb has been reserved
[ 0.096582] system 00:01: ioport range 0x63c0-0x63df has been reserved
[ 0.096592] system 00:01: ioport range 0x67b0-0x67bb has been reserved
[ 0.096602] system 00:01: ioport range 0x67c0-0x67df has been reserved
[ 0.096612] system 00:01: ioport range 0x6bb0-0x6bbb has been reserved
[ 0.096622] system 00:01: ioport range 0x6bc0-0x6bdf has been reserved
[ 0.096632] system 00:01: ioport range 0x6fb0-0x6fbb has been reserved
[ 0.096642] system 00:01: ioport range 0x6fc0-0x6fdf has been reserved
[ 0.096652] system 00:01: ioport range 0x73b0-0x73bb has been reserved
[ 0.096662] system 00:01: ioport range 0x73c0-0x73df has been reserved
[ 0.096672] system 00:01: ioport range 0x77b0-0x77bb has been reserved
[ 0.096682] system 00:01: ioport range 0x77c0-0x77df has been reserved
[ 0.096692] system 00:01: ioport range 0x7bb0-0x7bbb has been reserved
[ 0.096703] system 00:01: ioport range 0x7bc0-0x7bdf has been reserved
[ 0.096713] system 00:01: ioport range 0x7fb0-0x7fbb has been reserved
[ 0.096723] system 00:01: ioport range 0x7fc0-0x7fdf has been reserved
[ 0.096734] system 00:01: ioport range 0x83b0-0x83bb has been reserved
[ 0.096744] system 00:01: ioport range 0x83c0-0x83df has been reserved
[ 0.096754] system 00:01: ioport range 0x87b0-0x87bb has been reserved
[ 0.096764] system 00:01: ioport range 0x87c0-0x87df has been reserved
[ 0.096775] system 00:01: ioport range 0x8bb0-0x8bbb has been reserved
[ 0.096785] system 00:01: ioport range 0x8bc0-0x8bdf has been reserved
[ 0.096796] system 00:01: ioport range 0x8fb0-0x8fbb has been reserved
[ 0.096806] system 00:01: ioport range 0x8fc0-0x8fdf has been reserved
[ 0.096817] system 00:01: ioport range 0x93b0-0x93bb has been reserved
[ 0.096827] system 00:01: ioport range 0x93c0-0x93df has been reserved
[ 0.096838] system 00:01: ioport range 0x97b0-0x97bb has been reserved
[ 0.096848] system 00:01: ioport range 0x97c0-0x97df has been reserved
[ 0.096859] system 00:01: ioport range 0x9bb0-0x9bbb has been reserved
[ 0.096870] system 00:01: ioport range 0x9bc0-0x9bdf has been reserved
[ 0.096880] system 00:01: ioport range 0x9fb0-0x9fbb has been reserved
[ 0.096891] system 00:01: ioport range 0x9fc0-0x9fdf has been reserved
[ 0.096908] system 00:01: ioport range 0xb3b0-0xb3bb has been reserved
[ 0.096918] system 00:01: ioport range 0xb3c0-0xb3df has been reserved
[ 0.096929] system 00:01: ioport range 0xb7b0-0xb7bb has been reserved
[ 0.096940] system 00:01: ioport range 0xb7c0-0xb7df has been reserved
[ 0.096951] system 00:01: ioport range 0xbbb0-0xbbbb has been reserved
[ 0.096962] system 00:01: ioport range 0xbbc0-0xbbdf has been reserved
[ 0.096973] system 00:01: ioport range 0xbfb0-0xbfbb has been reserved
[ 0.096984] system 00:01: ioport range 0xbfc0-0xbfdf has been reserved
[ 0.096995] system 00:01: ioport range 0xc3b0-0xc3bb has been reserved
[ 0.097006] system 00:01: ioport range 0xc3c0-0xc3df has been reserved
[ 0.097017] system 00:01: ioport range 0xc7b0-0xc7bb has been reserved
[ 0.097028] system 00:01: ioport range 0xc7c0-0xc7df has been reserved
[ 0.097039] system 00:01: ioport range 0xcbb0-0xcbbb has been reserved
[ 0.097050] system 00:01: ioport range 0xcbc0-0xcbdf has been reserved
[ 0.097061] system 00:01: ioport range 0xcfb0-0xcfbb has been reserved
[ 0.097072] system 00:01: ioport range 0xcfc0-0xcfdf has been reserved
[ 0.097084] system 00:01: ioport range 0xd3b0-0xd3bb has been reserved
[ 0.097095] system 00:01: ioport range 0xd3c0-0xd3df has been reserved
[ 0.097106] system 00:01: ioport range 0xd7b0-0xd7bb has been reserved
[ 0.097117] system 00:01: ioport range 0xd7c0-0xd7df has been reserved
[ 0.097128] system 00:01: ioport range 0xdbb0-0xdbbb has been reserved
[ 0.097139] system 00:01: ioport range 0xdbc0-0xdbdf has been reserved
[ 0.097150] system 00:01: ioport range 0xdfb0-0xdfbb has been reserved
[ 0.097161] system 00:01: ioport range 0xdfc0-0xdfdf has been reserved
[ 0.097172] system 00:01: ioport range 0xe3b0-0xe3bb has been reserved
[ 0.097183] system 00:01: ioport range 0xe3c0-0xe3df has been reserved
[ 0.097195] system 00:01: ioport range 0xe7b0-0xe7bb has been reserved
[ 0.097207] system 00:01: ioport range 0xe7c0-0xe7df has been reserved
[ 0.097218] system 00:01: ioport range 0xebb0-0xebbb has been reserved
[ 0.097229] system 00:01: ioport range 0xebc0-0xebdf has been reserved
[ 0.097241] system 00:01: ioport range 0xefb0-0xefbb has been reserved
[ 0.097252] system 00:01: ioport range 0xefc0-0xefdf has been reserved
[ 0.097263] system 00:01: ioport range 0xf3b0-0xf3bb has been reserved
[ 0.097275] system 00:01: ioport range 0xf3c0-0xf3df has been reserved
[ 0.097286] system 00:01: ioport range 0xf7b0-0xf7bb has been reserved
[ 0.097297] system 00:01: ioport range 0xf7c0-0xf7df has been reserved
[ 0.097309] system 00:01: ioport range 0xfbb0-0xfbbb has been reserved
[ 0.097336] system 00:01: ioport range 0xfbc0-0xfbdf has been reserved
[ 0.097349] system 00:01: ioport range 0xffb0-0xffbb has been reserved
[ 0.097361] system 00:01: ioport range 0xffc0-0xffdf has been reserved
[ 0.097385] system 00:05: ioport range 0x600-0x60f has been reserved
[ 0.097394] system 00:05: ioport range 0x700-0x70f has been reserved
[ 0.097404] system 00:05: ioport range 0x8000-0x807f has been reserved
[ 0.097414] system 00:05: ioport range 0x8080-0x80bf has been reserved
[ 0.097423] system 00:05: ioport range 0x800-0x803 has been reserved
[ 0.097432] system 00:05: ioport range 0x170-0x177 has been reserved
[ 0.097442] system 00:05: ioport range 0x338-0x33f has been reserved
[ 0.097452] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.132701] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.132710] pci 0000:02:03.0: IO window: 0x00a400-0x00a4ff
[ 0.132720] pci 0000:02:03.0: IO window: 0x00a800-0x00a8ff
[ 0.132729] pci 0000:02:03.0: PREFETCH window: 0x18000000-0x1bffffff
[ 0.132739] pci 0000:02:03.0: MEM window: 0x24000000-0x27ffffff
[ 0.132748] pci 0000:02:07.0: CardBus bridge, secondary bus 0000:04
[ 0.132756] pci 0000:02:07.0: IO window: 0x00ac00-0x00acff
[ 0.132765] pci 0000:02:07.0: IO window: 0x001000-0x0010ff
[ 0.132774] pci 0000:02:07.0: PREFETCH window: 0x1c000000-0x1fffffff
[ 0.132784] pci 0000:02:07.0: MEM window: 0x28000000-0x2bffffff
[ 0.132793] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.132802] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.132812] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
[ 0.132822] pci 0000:00:1e.0: PREFETCH window: 0x18000000-0x21ffffff
[ 0.132848] pci 0000:00:1e.0: setting latency timer to 64
[ 0.133281] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.133289] PCI: setting IRQ 10 as level-triggered
[ 0.133300] pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level,
low) -> IRQ 10
[ 0.133311] pci 0000:02:03.0: setting latency timer to 64
[ 0.133327] pci 0000:02:07.0: enabling device (0000 -> 0003)
[ 0.133702] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 0.133713] pci 0000:02:07.0: PCI INT A -> Link[LNKE] -> GSI 10 (level,
low) -> IRQ 10
[ 0.133725] pci 0000:02:07.0: setting latency timer to 64
[ 0.133738] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.133747] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.133757] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.133766] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.133775] pci_bus 0000:02: resource 2 pref mem [0x18000000-0x21ffffff]
[ 0.133783] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.133791] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.133800] pci_bus 0000:03: resource 0 io: [0xa400-0xa4ff]
[ 0.133808] pci_bus 0000:03: resource 1 io: [0xa800-0xa8ff]
[ 0.133816] pci_bus 0000:03: resource 2 pref mem [0x18000000-0x1bffffff]
[ 0.133825] pci_bus 0000:03: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.133834] pci_bus 0000:04: resource 0 io: [0xac00-0xacff]
[ 0.133842] pci_bus 0000:04: resource 1 io: [0x1000-0x10ff]
[ 0.133850] pci_bus 0000:04: resource 2 pref mem [0x1c000000-0x1fffffff]
[ 0.133859] pci_bus 0000:04: resource 3 mem: [0x28000000-0x2bffffff]
[ 0.133971] NET: Registered protocol family 2
[ 0.134284] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.135202] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.135540] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.135909] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.135917] TCP reno registered
[ 0.136182] NET: Registered protocol family 1
[ 0.136251] pci 0000:00:02.0: Boot video device
[ 0.136511] Unpacking initramfs...
[ 0.793287] Freeing initrd memory: 8295k freed
[ 0.817706] Simple Boot Flag at 0x36 set to 0x1
[ 0.818523] audit: initializing netlink socket (disabled)
[ 0.818567] type=2000 audit(1282077447.818:1): initialized
[ 0.830654] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.835618] VFS: Disk quotas dquot_6.5.2
[ 0.835799] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.836035] msgmni has been set to 733
[ 0.836602] alg: No test for stdrng (krng)
[ 0.836687] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.836696] io scheduler noop registered
[ 0.836702] io scheduler anticipatory registered
[ 0.836709] io scheduler deadline registered
[ 0.836834] io scheduler cfq registered (default)
[ 0.837324] isapnp: Scanning for PnP cards...
[ 1.190082] isapnp: No Plug & Play device found
[ 1.194535] Linux agpgart interface v0.103
[ 1.194736] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.195810] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.197649] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.197861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.199096] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.199110] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 1.199125] serial 0000:00:1f.6: PCI INT B disabled
[ 1.199342] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.201854] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.203242] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.203266] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.203350] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.203418] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.203486] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.203770] mice: PS/2 mouse device common for all mice
[ 1.203992] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.204047] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 1.204081] cpuidle: using governor ladder
[ 1.204088] cpuidle: using governor menu
[ 1.204101] No iBFT detected.
[ 1.205370] TCP cubic registered
[ 1.205844] NET: Registered protocol family 10
[ 1.207346] lo: Disabled Privacy Extensions
[ 1.208447] Mobile IPv6
[ 1.208456] NET: Registered protocol family 17
[ 1.208501] Using IPI No-Shortcut mode
[ 1.208700] PM: Resume from disk failed.
[ 1.208729] registered taskstats version 1
[ 1.209174] rtc_cmos 00:02: setting system clock to 2010-08-17 20:37:28
UTC (1282077448)
[ 1.209277] Initalizing network drop monitor service
[ 1.209349] Freeing unused kernel memory: 368k freed
[ 1.209945] Write protecting the kernel text: 2500k
[ 1.210004] Write protecting the kernel read-only data: 920k
[ 1.226488] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.256350] udev: starting version 160
[ 1.862561] usbcore: registered new interface driver usbfs
[ 1.862948] usbcore: registered new interface driver hub
[ 1.863343] usbcore: registered new device driver usb
[ 1.876288] SCSI subsystem initialized
[ 1.906403] Floppy drive(s): fd0 is 1.44M
[ 1.920371] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.920397] ACPI: Thermal Zone [THRM] (44 C)
[ 1.925094] FDC 0 is a National Semiconductor PC87306
[ 2.012185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.025173] libata version 3.00 loaded.
[ 2.035282] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.035291] PCI: setting IRQ 11 as level-triggered
[ 2.035303] firewire_ohci 0000:02:03.1: PCI INT B -> Link[LNKC] -> GSI
11 (level, low) -> IRQ 11
[ 2.047057] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.047208] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 2.047239] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.047248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.047316] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.047365] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00008c80
[ 2.047497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.047506] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.047514] usb usb1: Product: UHCI Host Controller
[ 2.047521] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.047528] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.048072] usb usb1: configuration #1 chosen from 1 choice
[ 2.048251] hub 1-0:1.0: USB hub found
[ 2.048279] hub 1-0:1.0: 2 ports detected
[ 2.048893] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 2.048905] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 2.048925] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.048933] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.048959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.049001] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00008ca0
[ 2.049098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.049107] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.049115] usb usb2: Product: UHCI Host Controller
[ 2.049122] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.049129] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.049432] usb usb2: configuration #1 chosen from 1 choice
[ 2.049603] hub 2-0:1.0: USB hub found
[ 2.049624] hub 2-0:1.0: 2 ports detected
[ 2.049765] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.049781] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.049790] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.049813] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.049848] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00008cc0
[ 2.049946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.049955] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.049963] usb usb3: Product: UHCI Host Controller
[ 2.049970] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.049976] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.050260] usb usb3: configuration #1 chosen from 1 choice
[ 2.050427] hub 3-0:1.0: USB hub found
[ 2.050449] hub 3-0:1.0: 2 ports detected
[ 2.090691] ata_piix 0000:00:1f.1: version 2.13
[ 2.090726] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.090749] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.090860] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.093291] scsi0 : ata_piix
[ 2.093880] scsi1 : ata_piix
[ 2.095425] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9000
irq 14
[ 2.095435] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9008
irq 15
[ 2.100199] ata2: port disabled. ignoring.
[ 2.116037] firewire_ohci: Added fw-ohci device 0000:02:03.1, OHCI
version 1.0
[ 2.116258] 3c59x 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 2.116303] 3c59x: Donald Becker and others.
[ 2.116323] 0000:02:05.0: 3Com PCI 3c905C Tornado at d826e800.
[ 2.260636] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA72A, max UDMA/100
[ 2.260646] ata1.00: 58605120 sectors, multi 16: LBA
[ 2.276550] ata1.00: configured for UDMA/100
[ 2.276874] scsi 0:0:0:0: Direct-Access ATA IC25N030ATCS04-0
CA3O PQ: 0 ANSI: 5
[ 2.315399] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0
GB/27.9 GiB)
[ 2.315610] sd 0:0:0:0: [sda] Write Protect is off
[ 2.315619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.315707] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.316241] sda: sda1 sda2 < sda5 >
[ 2.359445] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.616281] firewire_core: created device fw0: GUID 00065b80020f19d9, S400
[ 2.928295] PM: Starting manual resume from disk
[ 2.928312] PM: Resume from partition 8:5
[ 2.928317] PM: Checking hibernation image.
[ 2.947023] PM: Error -22 checking image file
[ 2.947029] PM: Resume from disk failed.
[ 3.061896] kjournald starting. Commit interval 5 seconds
[ 3.061925] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.861294] udev: starting version 160
[ 6.938075] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.938396] ACPI: Power Button [PWRB]
[ 6.939531] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.940128] ACPI: Lid Switch [LID0]
[ 6.941346] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.941631] ACPI: Sleep Button [SLPB]
[ 6.941962] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.942131] ACPI: Power Button [PWRF]
[ 7.718065] Marking TSC unstable due to TSC halts in idle
[ 7.721642] processor LNXCPU:00: registered as cooling_device0
[ 7.722315] Switching to clocksource acpi_pm
[ 7.743701] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.765807] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.789710] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 7.809882] ACPI: AC Adapter [ADP1] (on-line)
[ 7.877982] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 7.878135] ACPI: Video Device [GRFX] (multi-head: yes rom: yes post:
no)
[ 7.899086] intel_rng: FWH not detected
[ 7.905557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.906534] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 7.934769] ACPI: Battery Slot [BAT1] (battery present)
[ 8.511658] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps:
0x804713/0x0/0x0
[ 8.551398] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input7
[ 8.699331] [drm] Initialized drm 1.1.0 20060810
[ 9.246555] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level,
low) -> IRQ 10
[ 9.246570] pci 0000:00:02.0: setting latency timer to 64
[ 9.271898] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:0122]
[ 9.273806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 9.400888] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10
[ 9.400899] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 9.400922] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 9.400934] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa000-0xafff: clean.
[ 9.402164] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 9.402174] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 9.402766] yenta_cardbus 0000:02:07.0: CardBus bridge found [12a3:ab01]
[ 9.402789] yenta_cardbus 0000:02:07.0: Enabling burst memory read
transactions
[ 9.402800] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC
interrupts to PCI
[ 9.402808] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI
[ 9.402818] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01000002, devctl 0x60
[ 9.638396] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0000, PCI irq 10
[ 9.638408] yenta_cardbus 0000:02:07.0: Socket status: 30000010
[ 9.638419] pci_bus 0000:02: Raising subordinate bus# of parent bus
(#02) from #04 to #07
[ 9.638443] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 9.638454] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa000-0xafff: clean.
[ 9.639681] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 9.639691] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 10.020396] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: clean.
[ 10.021419] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.021921] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
[ 10.022351] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: clean.
[ 10.023145] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
[ 10.168291] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] ->
GSI 10 (level, low) -> IRQ 10
[ 10.168336] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 10.276167] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted
into slot 1
[ 10.276202] pcmcia_socket pcmcia_socket1: cs: memory probe
0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 10.285249] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 10.294675] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x100-0x3af: clean.
[ 10.295696] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.296265] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x820-0x8ff: clean.
[ 10.296696] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xc00-0xcf7: clean.
[ 10.297471] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa00-0xaff: clean.
[ 10.357103] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.357144] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.848923] cfg80211: Using static regulatory domain info
[ 10.848933] cfg80211: Regulatory domain: US
[ 10.848940] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 10.848951] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 10.848962] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.848972] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.848982] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.848993] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.849003] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 10.849711] cfg80211: Calling CRDA for country: US
[ 11.132383] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>,
Pavel Roskin <proski@gnu.org>, et al)
[ 11.285192] orinoco_cs 0.15 (David Gibson
<hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 11.367010] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.367129] orinoco_cs 1.0: Station identity 001f:0001:0008:000a
[ 11.367139] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10
[ 11.369313] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 11.443343] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 11.451764] orinoco_cs 1.0: Cannot find firmware agere_sta_fw.bin
[ 11.451908] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.452098] orinoco_cs 1.0: Station identity 001f:0001:0008:000a
[ 11.452110] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10
[ 11.452117] orinoco_cs 1.0: Ad-hoc demo mode supported
[ 11.452123] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported
[ 11.452130] orinoco_cs 1.0: WEP supported, 104-bit key
[ 11.456478] intel8x0_measure_ac97_clock: measured 55656 usecs (2674
samples)
[ 11.456488] intel8x0: clocking to 48000
[ 12.458914] Adding 1100412k swap on /dev/sda5. Priority:-1 extents:1
across:1100412k
[ 12.864835] EXT3 FS on sda1, internal journal
[ 13.109596] loop: module loaded
[ 15.701073] fuse init (API version 7.13)
[ 17.894007] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 21.569720] eth0: setting half-duplex.
[ 21.569892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.582451] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.782789] eth1: New link status: Connected (0001)
[ 21.782946] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.242996] eth1: New link status: Disconnected (0002)
[ 22.598455] eth1: New link status: Connected (0001)
[ 22.606550] eth1: New link status: Disconnected (0002)
[ 22.802809] eth1: New link status: Connected (0001)
[ 22.807581] eth1: New link status: Disconnected (0002)
[ 23.008283] eth1: New link status: Connected (0001)
[ 23.013002] eth1: New link status: Disconnected (0002)
[ 23.212913] eth1: New link status: Connected (0001)
[ 23.217617] eth1: New link status: Disconnected (0002)
[ 23.418066] eth1: New link status: Connected (0001)
[ 23.424649] eth1: New link status: Disconnected (0002)
[ 23.895818] apm: BIOS not found.
[ 24.856634] eth1: New link status: Connected (0001)
[ 24.861468] eth1: New link status: Disconnected (0002)
[ 25.065178] eth1: New link status: Connected (0001)
[ 25.071614] eth1: New link status: Disconnected (0002)
[ 25.482166] Bluetooth: Core ver 2.15
[ 25.482336] NET: Registered protocol family 31
[ 25.482342] Bluetooth: HCI device and connection manager initialized
[ 25.482351] Bluetooth: HCI socket layer initialized
[ 25.575226] Bluetooth: L2CAP ver 2.14
[ 25.575234] Bluetooth: L2CAP socket layer initialized
[ 25.923956] Bluetooth: RFCOMM TTY layer initialized
[ 25.923970] Bluetooth: RFCOMM socket layer initialized
[ 25.923976] Bluetooth: RFCOMM ver 1.11
[ 25.926233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.926242] Bluetooth: BNEP filters: protocol multicast
[ 26.088620] Bridge firewalling registered
[ 26.267214] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.267223] Bluetooth: SCO socket layer initialized
[ 26.386405] eth1: New link status: Connected (0001)
[ 26.393317] eth1: New link status: Disconnected (0002)
[ 26.590754] eth1: New link status: Connected (0001)
[ 26.595595] eth1: New link status: Disconnected (0002)
[ 26.795820] eth1: New link status: Connected (0001)
[ 26.800858] eth1: New link status: Disconnected (0002)
[ 27.000319] eth1: New link status: Connected (0001)
[ 27.006849] eth1: New link status: Disconnected (0002)
[ 27.204973] eth1: New link status: Connected (0001)
[ 27.211358] eth1: New link status: Disconnected (0002)
[ 27.411159] eth1: New link status: Connected (0001)
[ 27.415988] eth1: New link status: Disconnected (0002)
[ 27.616324] eth1: New link status: Connected (0001)
[ 27.622616] eth1: New link status: Disconnected (0002)
[ 28.199541] lp: driver loaded but no devices found
[ 28.247286] ppdev: user-space parallel port driver
[ 29.048449] eth1: New link status: Connected (0001)
[ 29.055287] eth1: New link status: Disconnected (0002)
** Model information
not available
** Loaded modules:
Module Size Used by
speedstep_ich 1765 0
speedstep_lib 2468 1 speedstep_ich
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25167 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4907 1
uinput 4796 1
fuse 43758 1
loop 9757 0
orinoco_cs 8013 1
orinoco 47577 1 orinoco_cs
cfg80211 87625 1 orinoco
rfkill 10264 3 bluetooth,cfg80211
snd_intel8x0 19523 2
snd_intel8x0m 8100 0
snd_ac97_codec 79148 2 snd_intel8x0,snd_intel8x0m
snd_pcm_oss 28671 0
ac97_bus 710 1 snd_ac97_codec
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 4
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
pcmcia 17442 1 orinoco_cs
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
yenta_socket 16403 4
i915 221415 1
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 18305 1 i915
rsrc_nonstatic 7057 1 yenta_socket
joydev 6771 0
pcmcia_core 20450 4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
snd 34363 14
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm 112020 3 i915,drm_kms_helper
soundcore 3450 1 snd
i2c_i801 6462 0
shpchp 21220 0
i2c_algo_bit 3497 1 i915
snd_page_alloc 5045 3 snd_intel8x0,snd_intel8x0m,snd_pcm
video 14605 1 i915
container 1833 0
battery 3782 0
ac 1640 0
dcdbas 3892 0
rng_core 2178 0
i2c_core 12696 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
pci_hotplug 18065 1 shpchp
pcspkr 1207 0
psmouse 44657 0
processor 26615 1
button 3598 1 i915
evdev 5609 21
output 1204 1 video
serio_raw 2916 0
ext3 94204 1
jbd 32169 1 ext3
mbcache 3762 1 ext3
sd_mod 25869 3
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
ata_piix 17640 2
3c59x 25040 0
uhci_hcd 16057 0
firewire_ohci 16509 0
libata 115721 2 ata_generic,ata_piix
ehci_hcd 27851 0
thermal 9206 0
floppy 40923 0
mii 2714 1 3c59x
firewire_core 31187 1 firewire_ohci
crc_itu_t 1035 1 firewire_core
scsi_mod 101401 2 sd_mod,libata
usbcore 98386 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host
Bridge [8086:3575] (rev 04)
Subsystem: Dell Device [1028:0122]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82830 CGC
[Chipset Graphics Controller] [8086:3577] (rev 04) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 82830 CGC [Chipset
Graphics Controller] [8086:3577]
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2500ns max)
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 8c80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 8ca0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 8cc0 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=168
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 18000000-21ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC)
[8086:248c] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100
Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at 22000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
[8086:2483] (rev 02)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8ce0 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM
AC'97 Audio Controller [8086:2485] (rev 02)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 8400 [size=256]
Region 1: I/O ports at 80c0 [size=64]
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem Controller
[8086:2486] (rev 02) (prog-if 00 [Generic])
Subsystem: PCTel Inc Dell Inspiron 2100 internal modem [134d:4c21]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 8800 [size=256]
Region 1: I/O ports at 8c00 [size=128]
Kernel driver in use: Intel ICH Modem
02:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev b8)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394
Controller [1180:0551] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:05.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
[Tornado] [10b7:9200] (rev 78)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=128]
Region 1: Memory at e0200800 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
02:07.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus
Controller [104c:ac50] (rev 01)
Subsystem: Lucent Technologies Device [12a3:ab01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 1c000000-1ffff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000ac00-0000acff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf 1.5.33 Debian configuration
management sy
ii initramfs-tools 0.97.2 tools for generating an
initramfs
ii linux-base 2.6.35-1~experimental.1 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-2 GNU C Library: Shared
libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686:
true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
* linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: