[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#591895: marked as done (There are two problems with the handle of USB)

Your message dated Wed, 11 Aug 2010 03:47:40 +0100
with message-id <1281494860.7543.464.camel@localhost>
and subject line Re: Bug#591895: There are two problems with the handle of USB
has caused the Debian Bug report #591895,
regarding There are two problems with the handle of USB
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
591895: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591895
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- Package: linux-2.6
Severity: normal

debian-squeeze
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5)
(and 2.6.35-rc6)

1. The USB WIFI adapter is not working on all USB ports.

2. If I plug the USB WIFI adapter, the DVD-Reader on SATA-USB adapter stops during the play.

 

The card has 4+1 port PCI-USB (1 internal, 4 external) and VIA chip.



================================JMicron
usb 2-4: new high speed USB device using ehci_hcd and address 5
usb 2-4: New USB device found, idVendor=152d, idProduct=2329
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-4: Product: USB to ATA/ATAPI Bridge
usb 2-4: Manufacturer: JMicron
usb 2-4: SerialNumber: FFFFFFFFFFFF
usb 2-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7203S  1.03 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
================================JMicron END

=================================Atheros usb START
Using static regulatory domain info
Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
...
cfg80211: Calling CRDA for country: US
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver ar9170usb
=================================Atheros usb END, no wlan0

=================================Atheros START, other port
usb 2-2: new high speed USB device using ehci_hcd and address 19
usb 2-2: New USB device found, idVendor=0cf3, idProduct=1002
usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 2-2: Product: USB2.0 WLAN
usb 2-2: Manufacturer: ATHER
usb 2-2: SerialNumber: 12345
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: reset high speed USB device using ehci_hcd and address 19
usb 2-2: firmware: requesting ar9170.fw
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
phy0: Selected rate control algorithm 'minstrel'
cfg80211: Calling CRDA for country: CN
Registered led device: ar9170-phy0::tx
Registered led device: ar9170-phy0::assoc
usb 2-2: Atheros AR9170 is registered as 'phy0'
usb 2-2: USB disconnect, address 19
=================================Atheros END, iwconfig wlan0 ok

=================================>JMICRON lost
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device descriptor read/64, error -71
usb 2-4: device descriptor read/64, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
 usb 2-4: device descriptor read/64, error -71
usb 2-4: device descriptor read/64, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device not accepting address 5, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device not accepting address 5, error -71
usb 2-4: USB disconnect, address 5
sr 1:0:0:0: [sr0] Unhandled error code
 sr 1:0:0:0: [sr0] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 ca ea 00 00 3c 00
end_request: I/O error, dev sr0, sector 207784
Buffer I/O error on device sr0, logical block 51946
Buffer I/O error on device sr0, logical block 51947
Buffer I/O error on device sr0, logical block 51948
...
sr 1:0:0:0: [sr0] Unhandled error code
sr 1:0:0:0: [sr0] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 cb 26 00 00 3c 00
end_request: I/O error, dev sr0, sector 208024
...

Thanks
hz

lspci out:
00:00.0 Host bridge: Intel Corporation E7320 Memory Controller Hub (rev 0c)
    Subsystem: Intel Corporation E7320 Memory Controller Hub
    Flags: bus master, fast devsel, latency 0
    Capabilities: [40] Vendor Specific Information: Len=05 <?>

00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Capabilities: [50] Power Management version 2
    Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
    Capabilities: [64] Express Root Port (Slot-), MSI 00
    Kernel driver in use: pcieport

00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: dd100000-dd1fffff
    Capabilities: [50] Power Management version 2
    Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
    Capabilities: [64] Express Root Port (Slot-), MSI 00
    Kernel driver in use: pcieport

00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, fast devsel, latency 48
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=48
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: dd200000-dd2fffff
    Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
    Capabilities: [50] PCI-X bridge device

00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at 1400 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at 1420 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
    Subsystem: Hewlett-Packard Company Device 0000
    Flags: medium devsel
    Memory at dd001000 (32-bit, non-prefetchable) [size=16]
    Kernel driver in use: i6300ESB timer

00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
    Subsystem: Intel Corporation Device 25a1
    Flags: bus master, fast devsel, latency 0
    Capabilities: [50] PCI-X non-bridge device

00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 24d0
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at dd001400 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=0080
    Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: dd300000-deffffff
    Prefetchable memory behind bridge: 40100000-401fffff

00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
    Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 1440 [size=16]
    Memory at 40200000 (32-bit, non-prefetchable) [size=1K]
    Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: medium devsel, IRQ 17
    I/O ports at 1100 [size=32]
    Kernel driver in use: i801_smbus

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
    Subsystem: Hewlett-Packard Company Device 3260
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at dd100000 (64-bit, non-prefetchable) [size=64K]
    Expansion ROM at <ignored> [disabled]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
    Capabilities: [d0] Express Endpoint, MSI 00
    Kernel driver in use: tg3

03:01.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
    Subsystem: Adaptec 29160LP Low Profile Ultra160 SCSI Controller
    Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 24
    BIST result: 00
    I/O ports at 2000 [disabled] [size=256]
    Memory at dd200000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at 40000000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: aic7xxx

03:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46) (prog-if 10 [OHCI])
    Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    Flags: bus master, medium devsel, latency 32, IRQ 25
    Memory at dd201000 (32-bit, non-prefetchable) [size=2K]
    I/O ports at 2400 [size=128]
    Capabilities: [50] Power Management version 2
    Kernel driver in use: firewire_ohci

03:03.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Flags: bus master, medium devsel, latency 32, IRQ 26
    I/O ports at 2480 [size=32]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: uhci_hcd

03:03.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Flags: bus master, medium devsel, latency 32, IRQ 27
    I/O ports at 24a0 [size=32]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: uhci_hcd

03:03.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI])
    Subsystem: VIA Technologies, Inc. USB 2.0
    Flags: bus master, medium devsel, latency 32, IRQ 24
    Memory at dd201800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci_hcd

03:04.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
    Subsystem: Creative Labs SB0570 [SB Audigy SE]
    Flags: bus master, medium devsel, latency 32, IRQ 27
    I/O ports at 24c0 [size=32]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: CA0106

04:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA controller])
    Subsystem: ATI Technologies Inc Rage XL
    Flags: bus master, stepping, medium devsel, latency 66, IRQ 10
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    I/O ports at 3000 [size=256]
    Memory at dd300000 (32-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at 40100000 [disabled] [size=128K]
    Capabilities: [5c] Power Management version 2




Attachment: kern_send.log
Description: Binary data


--- End Message ---
--- Begin Message --- 
On Mon, 2010-08-09 at 16:19 +0200, zoltan herman wrote:
> Hi Ben,
> 
> I tried with the kernel 2.6.32-19 and it didn't recognize the pendrive
> (but it didn't even stop the play of the DVD).
> Although it is not an error, because there are "4+1 (internal share)"
> in the description of PCI-USB extension card, so in case of being a
> tool on the inner port the outer port isn't useable due to the share.
> So if you agree the bug can be closed.

OK, closing.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: