[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#591895: There are two problems with the handle of USB



Package: linux-2.6
Severity: normal

debian-squeeze
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5)
(and 2.6.35-rc6)

1. The USB WIFI adapter is not working on all USB ports.

2. If I plug the USB WIFI adapter, the DVD-Reader on SATA-USB adapter stops during the play.

 

The card has 4+1 port PCI-USB (1 internal, 4 external) and VIA chip.



================================JMicron
usb 2-4: new high speed USB device using ehci_hcd and address 5
usb 2-4: New USB device found, idVendor=152d, idProduct=2329
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-4: Product: USB to ATA/ATAPI Bridge
usb 2-4: Manufacturer: JMicron
usb 2-4: SerialNumber: FFFFFFFFFFFF
usb 2-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7203S  1.03 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
================================JMicron END

=================================Atheros usb START
Using static regulatory domain info
Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
...
cfg80211: Calling CRDA for country: US
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver ar9170usb
=================================Atheros usb END, no wlan0

=================================Atheros START, other port
usb 2-2: new high speed USB device using ehci_hcd and address 19
usb 2-2: New USB device found, idVendor=0cf3, idProduct=1002
usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 2-2: Product: USB2.0 WLAN
usb 2-2: Manufacturer: ATHER
usb 2-2: SerialNumber: 12345
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: reset high speed USB device using ehci_hcd and address 19
usb 2-2: firmware: requesting ar9170.fw
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
phy0: Selected rate control algorithm 'minstrel'
cfg80211: Calling CRDA for country: CN
Registered led device: ar9170-phy0::tx
Registered led device: ar9170-phy0::assoc
usb 2-2: Atheros AR9170 is registered as 'phy0'
usb 2-2: USB disconnect, address 19
=================================Atheros END, iwconfig wlan0 ok

=================================>JMICRON lost
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device descriptor read/64, error -71
usb 2-4: device descriptor read/64, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
 usb 2-4: device descriptor read/64, error -71
usb 2-4: device descriptor read/64, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device not accepting address 5, error -71
usb 2-4: reset high speed USB device using ehci_hcd and address 5
usb 2-4: device not accepting address 5, error -71
usb 2-4: USB disconnect, address 5
sr 1:0:0:0: [sr0] Unhandled error code
 sr 1:0:0:0: [sr0] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 ca ea 00 00 3c 00
end_request: I/O error, dev sr0, sector 207784
Buffer I/O error on device sr0, logical block 51946
Buffer I/O error on device sr0, logical block 51947
Buffer I/O error on device sr0, logical block 51948
...
sr 1:0:0:0: [sr0] Unhandled error code
sr 1:0:0:0: [sr0] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 cb 26 00 00 3c 00
end_request: I/O error, dev sr0, sector 208024
...

Thanks
hz

lspci out:
00:00.0 Host bridge: Intel Corporation E7320 Memory Controller Hub (rev 0c)
    Subsystem: Intel Corporation E7320 Memory Controller Hub
    Flags: bus master, fast devsel, latency 0
    Capabilities: [40] Vendor Specific Information: Len=05 <?>

00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Capabilities: [50] Power Management version 2
    Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
    Capabilities: [64] Express Root Port (Slot-), MSI 00
    Kernel driver in use: pcieport

00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: dd100000-dd1fffff
    Capabilities: [50] Power Management version 2
    Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
    Capabilities: [64] Express Root Port (Slot-), MSI 00
    Kernel driver in use: pcieport

00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, fast devsel, latency 48
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=48
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: dd200000-dd2fffff
    Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
    Capabilities: [50] PCI-X bridge device

00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at 1400 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at 1420 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
    Subsystem: Hewlett-Packard Company Device 0000
    Flags: medium devsel
    Memory at dd001000 (32-bit, non-prefetchable) [size=16]
    Kernel driver in use: i6300ESB timer

00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
    Subsystem: Intel Corporation Device 25a1
    Flags: bus master, fast devsel, latency 0
    Capabilities: [50] PCI-X non-bridge device

00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 24d0
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at dd001400 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=0080
    Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: dd300000-deffffff
    Prefetchable memory behind bridge: 40100000-401fffff

00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
    Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 1440 [size=16]
    Memory at 40200000 (32-bit, non-prefetchable) [size=1K]
    Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
    Subsystem: Hewlett-Packard Company Device 25a1
    Flags: medium devsel, IRQ 17
    I/O ports at 1100 [size=32]
    Kernel driver in use: i801_smbus

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
    Subsystem: Hewlett-Packard Company Device 3260
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at dd100000 (64-bit, non-prefetchable) [size=64K]
    Expansion ROM at <ignored> [disabled]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
    Capabilities: [d0] Express Endpoint, MSI 00
    Kernel driver in use: tg3

03:01.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
    Subsystem: Adaptec 29160LP Low Profile Ultra160 SCSI Controller
    Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 24
    BIST result: 00
    I/O ports at 2000 [disabled] [size=256]
    Memory at dd200000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at 40000000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: aic7xxx

03:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46) (prog-if 10 [OHCI])
    Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    Flags: bus master, medium devsel, latency 32, IRQ 25
    Memory at dd201000 (32-bit, non-prefetchable) [size=2K]
    I/O ports at 2400 [size=128]
    Capabilities: [50] Power Management version 2
    Kernel driver in use: firewire_ohci

03:03.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Flags: bus master, medium devsel, latency 32, IRQ 26
    I/O ports at 2480 [size=32]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: uhci_hcd

03:03.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Flags: bus master, medium devsel, latency 32, IRQ 27
    I/O ports at 24a0 [size=32]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: uhci_hcd

03:03.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI])
    Subsystem: VIA Technologies, Inc. USB 2.0
    Flags: bus master, medium devsel, latency 32, IRQ 24
    Memory at dd201800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci_hcd

03:04.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
    Subsystem: Creative Labs SB0570 [SB Audigy SE]
    Flags: bus master, medium devsel, latency 32, IRQ 27
    I/O ports at 24c0 [size=32]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: CA0106

04:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA controller])
    Subsystem: ATI Technologies Inc Rage XL
    Flags: bus master, stepping, medium devsel, latency 66, IRQ 10
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    I/O ports at 3000 [size=256]
    Memory at dd300000 (32-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at 40100000 [disabled] [size=128K]
    Capabilities: [5c] Power Management version 2




Attachment: kern_send.log
Description: Binary data


Reply to: