Your message dated Tue, 15 Jun 2010 00:33:31 +0100 with message-id <1276558411.14011.336.camel@localhost> and subject line Re: Bug#585917: linux-image-2.6.34-1-686-bigmem: My rt2870 USB dongle is not recognized has caused the Debian Bug report #585917, regarding linux-image-2.6.34-1-686-bigmem: My rt2870 USB dongle is not recognized to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 585917: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=585917 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.34-1-686-bigmem: My rt2870 USB dongle is not recognized
- From: Stefan Monnier <monnier@iro.umontreal.ca>
- Date: Mon, 14 Jun 2010 16:55:44 -0400
- Message-id: <20100614205544.9865.35782.reportbug@localhost>
Package: linux-2.6 Version: 2.6.34-1~experimental.2 Severity: normal When I insert my USB wifi dongle (based on the rt2870 chipset, AFAIK), the 2.6.34-1 kernel doesn't seem to recognize it. The rt2800usb module is not automatically loaded and even if I load it manually it doesn't seem to care about that USB device. In 2.6.32-5 kernel, the key used to be recognized (by both rt2800usb and rt2870sta and I had to blacklist one of the two to avoid conflicts). To be honest, it did not work too well under 2.6.32-5 (although I did get it to work with my WPA home network with some previous 2.6.32 kernel), but I'm very surprised that it is simply ignored. Stefan -- Package-specific info: ** Version: Linux version 2.6.34-1-686-bigmem (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 23:37:13 UTC 2010 ** Command line: root=/dev/mapper/Pastel-root vga=0x307 ro ** Not tainted ** Kernel log: [ 209.764060] wlan0: authenticated [ 209.765554] wlan0: associate with 00:18:3f:cb:5a:59 (try 1) [ 209.767059] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=3) [ 209.767062] wlan0: associated [ 209.780987] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 209.781062] cfg80211: Calling CRDA for country: US [ 219.900014] wlan0: no IPv6 routers present [ 301.841853] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3) [ 301.881033] cfg80211: Calling CRDA to update world regulatory domain [ 311.501034] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 313.867008] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1) [ 313.870133] wlan0: authenticated [ 313.871626] wlan0: associate with 00:18:3f:cb:5a:59 (try 1) [ 313.873131] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=3) [ 313.873134] wlan0: associated [ 313.887062] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 324.197014] wlan0: no IPv6 routers present [ 327.031822] padlock: VIA PadLock Hash Engine not detected. [ 327.041511] PPP MPPE Compression module registered [ 327.762323] tun: Universal TUN/TAP device driver, 1.6 [ 327.762328] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 327.763097] tun0: Disabled Privacy Extensions [ 5360.269032] end_request: I/O error, dev fd0, sector 0 [ 5360.368172] end_request: I/O error, dev fd0, sector 0 [ 5360.472036] end_request: I/O error, dev fd0, sector 0 [ 6529.132300] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [ 7129.151881] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 7129.151915] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [18809.793867] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [21111.800927] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [21111.810909] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [21678.743312] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [27965.227072] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [28248.195735] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [33116.530434] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [33716.551329] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [33716.551363] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [33893.262709] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [36083.376722] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [36083.396986] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [36917.924399] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [37756.145141] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [37756.155645] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [38655.317476] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [44205.527993] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [44674.700084] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [45297.342779] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [45709.540178] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [46390.581698] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [46990.615267] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [46990.615306] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [48547.468491] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [52781.925184] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [53381.947516] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [53381.947558] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [76850.660019] Clocksource tsc unstable (delta = -62588523 ns) [80398.288155] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [81414.304565] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [81414.320718] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [82651.758437] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [87357.212262] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [87357.222241] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [87682.100203] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [90364.988082] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [90364.998041] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [95241.969830] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [95301.488027] No probe response from AP 00:18:3f:cb:5a:59 after 500ms, disconnecting. [95301.533021] cfg80211: Calling CRDA to update world regulatory domain [95302.377602] ADDRCONF(NETDEV_UP): wlan0: link is not ready [95356.691733] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1) [95356.693866] wlan0: authenticated [95356.695356] wlan0: associate with 00:18:3f:cb:5a:59 (try 1) [95356.698236] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2) [95356.698239] wlan0: associated [95356.712042] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [95367.145027] wlan0: no IPv6 routers present [95736.784032] usb 1-10: new high speed USB device using ehci_hcd and address 6 [95736.942187] usb 1-10: New USB device found, idVendor=148f, idProduct=3070 [95736.942193] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [95736.942196] usb 1-10: Product: ASEC11 n WLAN [95736.942198] usb 1-10: Manufacturer: Ralink [95736.942200] usb 1-10: SerialNumber: 1.0 [95766.035550] usbcore: registered new interface driver rt2800usb [96674.409356] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [97274.428921] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [97274.428956] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [98062.118548] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [106980.703523] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [107580.723568] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [107580.723598] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [107619.488031] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [107693.527294] usb 1-10: USB disconnect, address 6 [107710.729017] usb 1-10: new high speed USB device using ehci_hcd and address 7 [107710.879489] usb 1-10: New USB device found, idVendor=148f, idProduct=3070 [107710.879495] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [107710.879497] usb 1-10: Product: ASEC11 n WLAN [107710.879500] usb 1-10: Manufacturer: Ralink [107710.879501] usb 1-10: SerialNumber: 1.0 [111676.850609] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [111689.891386] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) ** Model information not available ** Loaded modules: Module Size Used by rt2800usb 6144 0 rt2800lib 17785 1 rt2800usb tun 9417 2 sha1_generic 1363 4 ppp_mppe 4583 2 arc4 994 4 ecb 1405 4 rt73usb 15614 0 rt2x00usb 5683 3 rt2800usb,rt2800lib,rt73usb rt2x00lib 18306 3 rt2800lib,rt73usb,rt2x00usb led_class 1575 1 rt2x00lib mac80211 132512 2 rt2x00usb,rt2x00lib cfg80211 97445 2 rt2x00lib,mac80211 xt_state 899 1 powernow_k8 9934 1 cpufreq_conservative 6246 0 cpufreq_userspace 1492 0 cpufreq_stats 1934 0 cpufreq_powersave 606 0 ppdev 4475 0 lp 5798 0 sco 5847 2 bridge 44118 0 stp 1012 1 bridge bnep 7446 2 rfcomm 24377 0 l2cap 21911 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 35110 6 sco,bnep,rfcomm,l2cap rfkill 10558 3 cfg80211,bluetooth autofs4 16412 2 nfsd 191520 2 exportfs 2658 1 nfsd nfs 204054 0 lockd 49673 2 nfsd,nfs fscache 24302 1 nfs nfs_acl 1671 2 nfsd,nfs auth_rpcgss 24833 2 nfsd,nfs sunrpc 133525 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss ipt_MASQUERADE 1054 1 iptable_nat 2895 1 nf_nat 10769 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 7493 4 iptable_nat,nf_nat iptable_filter 960 1 nf_conntrack 38633 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 839 1 nf_conntrack_ipv4 ip_tables 7802 2 iptable_nat,iptable_filter x_tables 8637 5 xt_state,ipt_MASQUERADE,iptable_nat,iptable_filter,ip_tables ppp_async 5245 1 crc_ccitt 1039 2 rt2800usb,ppp_async ppp_generic 16231 6 ppp_mppe,ppp_async slhc 3486 1 ppp_generic usbhid 27630 0 hid 50507 1 usbhid fuse 43631 1 snd_wavefront 24864 0 snd_cs4236 21114 0 snd_intel8x0 19507 0 snd_wss_lib 14837 2 snd_wavefront,snd_cs4236 snd_ac97_codec 76621 1 snd_intel8x0 snd_opl3_lib 6049 2 snd_wavefront,snd_cs4236 snd_hwdep 4042 2 snd_wavefront,snd_opl3_lib ac97_bus 714 1 snd_ac97_codec snd_mpu401 3644 0 snd_pcm_oss 27474 0 snd_mixer_oss 10335 1 snd_pcm_oss snd_pcm 47028 5 snd_cs4236,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_pcm_oss snd_mpu401_uart 4055 3 snd_wavefront,snd_cs4236,snd_mpu401 snd_seq_midi 3602 0 snd_rawmidi 12621 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 3742 1 snd_seq_midi nouveau 316982 4 snd_seq 34704 2 snd_seq_midi,snd_seq_midi_event ttm 32533 1 nouveau drm_kms_helper 18331 1 nouveau cdc_ether 2950 0 snd_timer 12489 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq usbnet 11237 1 cdc_ether drm 113102 4 nouveau,ttm,drm_kms_helper snd_seq_device 3651 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq snd 34020 16 snd_wavefront,snd_cs4236,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_opl3_lib,snd_hwdep,snd_mpu401,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 3537 1 nouveau tpm_tis 5517 0 tpm 8071 1 tpm_tis mii 2706 1 usbnet i2c_nforce2 4480 0 snd_page_alloc 5121 3 snd_intel8x0,snd_wss_lib,snd_pcm k8temp 2399 0 asus_atk0110 7852 0 tpm_bios 3569 1 tpm soundcore 3630 1 snd i2c_core 12616 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2 ns558 1689 0 pcspkr 1211 0 gameport 6081 2 ns558 serio_raw 2894 0 evdev 5627 15 processor 25023 1 powernow_k8 button 3618 1 nouveau parport_pc 15761 1 parport 21194 3 ppdev,lp,parport_pc ext3 92093 5 jbd 31631 1 ext3 mbcache 3840 1 ext3 dm_mod 46914 17 sg 15825 0 sr_mod 10845 0 sd_mod 26321 3 cdrom 25848 1 sr_mod crc_t10dif 1012 1 sd_mod usb_storage 30107 0 ata_generic 1943 0 ohci_hcd 16713 0 pata_amd 6676 0 fan 2502 0 sata_nv 15411 2 firewire_ohci 16265 0 thermal 9502 0 ehci_hcd 27708 0 libata 115088 3 ata_generic,pata_amd,sata_nv firewire_core 32526 1 firewire_ohci crc_itu_t 1031 2 rt73usb,firewire_core floppy 41697 0 skge 30017 0 usbcore 99473 10 rt2800usb,rt73usb,rt2x00usb,usbhid,cdc_ether,usbnet,usb_storage,ohci_hcd,ehci_hcd thermal_sys 9436 3 processor,fan,thermal nls_base 4521 1 usbcore forcedeth 40349 0 scsi_mod 103091 5 sg,sr_mod,sd_mod,usb_storage,libata ** PCI devices: 00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3) Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at e400 [size=32] Region 4: I/O ports at 4c00 [size=64] Region 5: I/O ports at 4c40 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at d5004000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at d5005000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at e000 [size=256] Region 2: Memory at d5003000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d800 [size=16] Region 5: Memory at d5002000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: Memory at d5001000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=128 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d3000000-d4ffffff Prefetchable memory behind bridge: d5100000-d51fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- 00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b000 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth 00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d2ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] [10de:0161] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ba] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at d2000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 05:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4008000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13) Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at a000 [size=256] [virtual] Expansion ROM at d5100000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge ** USB devices: Bus 002 Device 006: ID 06cb:0009 Synaptics, Inc. Composite TouchPad and TrackPoint Bus 002 Device 005: ID 04b3:3019 IBM Corp. Bus 002 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58) Bus 002 Device 003: ID 04b3:3016 IBM Corp. UltraNav Keyboard Hub Bus 002 Device 002: ID 1457:5122 First International Computer, Inc. OpenMoko Neo1973 / Neo Freerunner kernel cdc_ether USB network Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 001 Device 005: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573] Bus 001 Device 004: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.34-1-686-bigmem (SMP w/2 CPU cores) Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.34-1-686-bigmem depends on: ii debconf [debconf 1.5.32 Debian configuration management sy ii initramfs-tools 0.94.4 tools for generating an initramfs ii linux-base 2.6.34-1~experimental.2 Linux image base package ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.34-1-686-bigmem recommends: ii firmware-linux-free 2.6.32-15 Binary firmware for various driver ii libc6-i686 2.10.2-9 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.34-1-686-bigmem suggests: ii grub-legacy [grub] 0.97-61 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.34 <none> (no description available) Versions of packages linux-image-2.6.34-1-686-bigmem is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.24 Binary firmware for Ralink RT2561, pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.34-1-686-bigmem/prerm/removing-running-kernel-2.6.34-1-686-bigmem: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.34-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.34-1-686-bigmem: true linux-image-2.6.34-1-686-bigmem/postinst/depmod-error-initrd-2.6.34-1-686-bigmem: false * linux-image-2.6.34-1-686-bigmem/postinst/missing-firmware-2.6.34-1-686-bigmem: linux-image-2.6.34-1-686-bigmem/postinst/bootloader-error-2.6.34-1-686-bigmem: linux-image-2.6.34-1-686-bigmem/postinst/bootloader-test-error-2.6.34-1-686-bigmem:
--- End Message ---
--- Begin Message ---
- To: 585917-done@bugs.debian.org
- Subject: Re: Bug#585917: linux-image-2.6.34-1-686-bigmem: My rt2870 USB dongle is not recognized
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 15 Jun 2010 00:33:31 +0100
- Message-id: <1276558411.14011.336.camel@localhost>
- In-reply-to: <20100614205544.9865.35782.reportbug@localhost>
- References: <20100614205544.9865.35782.reportbug@localhost>
On Mon, 2010-06-14 at 16:55 -0400, Stefan Monnier wrote: > Package: linux-2.6 > Version: 2.6.34-1~experimental.2 > Severity: normal > > When I insert my USB wifi dongle (based on the rt2870 chipset, AFAIK), Actually RT3070, which is related but not the same. > the > 2.6.34-1 kernel doesn't seem to recognize it. The rt2800usb module is not > automatically loaded and even if I load it manually it doesn't seem to > care about that USB device. This is correct. rt2800usb does not fully support the RT3070. > In 2.6.32-5 kernel, the key used to be recognized (by both rt2800usb and > rt2870sta and I had to blacklist one of the two to avoid conflicts). To be > honest, it did not work too well under 2.6.32-5 (although I did get it to work > with my WPA home network with some previous 2.6.32 kernel), but I'm very > surprised that it is simply ignored. You should remove the blacklisting of rt2870sta. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---