Bug#585917: linux-image-2.6.34-1-686-bigmem: My rt2870 USB dongle is not recognized
Package: linux-2.6
Version: 2.6.34-1~experimental.2
Severity: normal
When I insert my USB wifi dongle (based on the rt2870 chipset, AFAIK), the
2.6.34-1 kernel doesn't seem to recognize it. The rt2800usb module is not
automatically loaded and even if I load it manually it doesn't seem to
care about that USB device.
In 2.6.32-5 kernel, the key used to be recognized (by both rt2800usb and
rt2870sta and I had to blacklist one of the two to avoid conflicts). To be
honest, it did not work too well under 2.6.32-5 (although I did get it to work
with my WPA home network with some previous 2.6.32 kernel), but I'm very
surprised that it is simply ignored.
Stefan
-- Package-specific info:
** Version:
Linux version 2.6.34-1-686-bigmem (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 23:37:13 UTC 2010
** Command line:
root=/dev/mapper/Pastel-root vga=0x307 ro
** Not tainted
** Kernel log:
[ 209.764060] wlan0: authenticated
[ 209.765554] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[ 209.767059] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=3)
[ 209.767062] wlan0: associated
[ 209.780987] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 209.781062] cfg80211: Calling CRDA for country: US
[ 219.900014] wlan0: no IPv6 routers present
[ 301.841853] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3)
[ 301.881033] cfg80211: Calling CRDA to update world regulatory domain
[ 311.501034] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 313.867008] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[ 313.870133] wlan0: authenticated
[ 313.871626] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[ 313.873131] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=3)
[ 313.873134] wlan0: associated
[ 313.887062] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 324.197014] wlan0: no IPv6 routers present
[ 327.031822] padlock: VIA PadLock Hash Engine not detected.
[ 327.041511] PPP MPPE Compression module registered
[ 327.762323] tun: Universal TUN/TAP device driver, 1.6
[ 327.762328] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 327.763097] tun0: Disabled Privacy Extensions
[ 5360.269032] end_request: I/O error, dev fd0, sector 0
[ 5360.368172] end_request: I/O error, dev fd0, sector 0
[ 5360.472036] end_request: I/O error, dev fd0, sector 0
[ 6529.132300] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[ 7129.151881] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 7129.151915] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[18809.793867] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[21111.800927] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[21111.810909] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[21678.743312] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[27965.227072] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[28248.195735] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[33116.530434] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[33716.551329] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[33716.551363] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[33893.262709] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[36083.376722] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[36083.396986] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[36917.924399] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[37756.145141] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[37756.155645] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[38655.317476] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[44205.527993] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[44674.700084] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[45297.342779] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[45709.540178] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[46390.581698] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[46990.615267] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[46990.615306] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[48547.468491] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[52781.925184] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[53381.947516] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[53381.947558] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[76850.660019] Clocksource tsc unstable (delta = -62588523 ns)
[80398.288155] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[81414.304565] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[81414.320718] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[82651.758437] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[87357.212262] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[87357.222241] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[87682.100203] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[90364.988082] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[90364.998041] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[95241.969830] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[95301.488027] No probe response from AP 00:18:3f:cb:5a:59 after 500ms, disconnecting.
[95301.533021] cfg80211: Calling CRDA to update world regulatory domain
[95302.377602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[95356.691733] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[95356.693866] wlan0: authenticated
[95356.695356] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[95356.698236] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[95356.698239] wlan0: associated
[95356.712042] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[95367.145027] wlan0: no IPv6 routers present
[95736.784032] usb 1-10: new high speed USB device using ehci_hcd and address 6
[95736.942187] usb 1-10: New USB device found, idVendor=148f, idProduct=3070
[95736.942193] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[95736.942196] usb 1-10: Product: ASEC11 n WLAN
[95736.942198] usb 1-10: Manufacturer: Ralink
[95736.942200] usb 1-10: SerialNumber: 1.0
[95766.035550] usbcore: registered new interface driver rt2800usb
[96674.409356] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[97274.428921] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[97274.428956] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[98062.118548] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[106980.703523] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[107580.723568] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[107580.723598] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[107619.488031] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[107693.527294] usb 1-10: USB disconnect, address 6
[107710.729017] usb 1-10: new high speed USB device using ehci_hcd and address 7
[107710.879489] usb 1-10: New USB device found, idVendor=148f, idProduct=3070
[107710.879495] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[107710.879497] usb 1-10: Product: ASEC11 n WLAN
[107710.879500] usb 1-10: Manufacturer: Ralink
[107710.879501] usb 1-10: SerialNumber: 1.0
[111676.850609] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[111689.891386] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
** Model information
not available
** Loaded modules:
Module Size Used by
rt2800usb 6144 0
rt2800lib 17785 1 rt2800usb
tun 9417 2
sha1_generic 1363 4
ppp_mppe 4583 2
arc4 994 4
ecb 1405 4
rt73usb 15614 0
rt2x00usb 5683 3 rt2800usb,rt2800lib,rt73usb
rt2x00lib 18306 3 rt2800lib,rt73usb,rt2x00usb
led_class 1575 1 rt2x00lib
mac80211 132512 2 rt2x00usb,rt2x00lib
cfg80211 97445 2 rt2x00lib,mac80211
xt_state 899 1
powernow_k8 9934 1
cpufreq_conservative 6246 0
cpufreq_userspace 1492 0
cpufreq_stats 1934 0
cpufreq_powersave 606 0
ppdev 4475 0
lp 5798 0
sco 5847 2
bridge 44118 0
stp 1012 1 bridge
bnep 7446 2
rfcomm 24377 0
l2cap 21911 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 35110 6 sco,bnep,rfcomm,l2cap
rfkill 10558 3 cfg80211,bluetooth
autofs4 16412 2
nfsd 191520 2
exportfs 2658 1 nfsd
nfs 204054 0
lockd 49673 2 nfsd,nfs
fscache 24302 1 nfs
nfs_acl 1671 2 nfsd,nfs
auth_rpcgss 24833 2 nfsd,nfs
sunrpc 133525 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipt_MASQUERADE 1054 1
iptable_nat 2895 1
nf_nat 10769 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 7493 4 iptable_nat,nf_nat
iptable_filter 960 1
nf_conntrack 38633 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 839 1 nf_conntrack_ipv4
ip_tables 7802 2 iptable_nat,iptable_filter
x_tables 8637 5 xt_state,ipt_MASQUERADE,iptable_nat,iptable_filter,ip_tables
ppp_async 5245 1
crc_ccitt 1039 2 rt2800usb,ppp_async
ppp_generic 16231 6 ppp_mppe,ppp_async
slhc 3486 1 ppp_generic
usbhid 27630 0
hid 50507 1 usbhid
fuse 43631 1
snd_wavefront 24864 0
snd_cs4236 21114 0
snd_intel8x0 19507 0
snd_wss_lib 14837 2 snd_wavefront,snd_cs4236
snd_ac97_codec 76621 1 snd_intel8x0
snd_opl3_lib 6049 2 snd_wavefront,snd_cs4236
snd_hwdep 4042 2 snd_wavefront,snd_opl3_lib
ac97_bus 714 1 snd_ac97_codec
snd_mpu401 3644 0
snd_pcm_oss 27474 0
snd_mixer_oss 10335 1 snd_pcm_oss
snd_pcm 47028 5 snd_cs4236,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_pcm_oss
snd_mpu401_uart 4055 3 snd_wavefront,snd_cs4236,snd_mpu401
snd_seq_midi 3602 0
snd_rawmidi 12621 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 3742 1 snd_seq_midi
nouveau 316982 4
snd_seq 34704 2 snd_seq_midi,snd_seq_midi_event
ttm 32533 1 nouveau
drm_kms_helper 18331 1 nouveau
cdc_ether 2950 0
snd_timer 12489 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
usbnet 11237 1 cdc_ether
drm 113102 4 nouveau,ttm,drm_kms_helper
snd_seq_device 3651 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
snd 34020 16 snd_wavefront,snd_cs4236,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_opl3_lib,snd_hwdep,snd_mpu401,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_algo_bit 3537 1 nouveau
tpm_tis 5517 0
tpm 8071 1 tpm_tis
mii 2706 1 usbnet
i2c_nforce2 4480 0
snd_page_alloc 5121 3 snd_intel8x0,snd_wss_lib,snd_pcm
k8temp 2399 0
asus_atk0110 7852 0
tpm_bios 3569 1 tpm
soundcore 3630 1 snd
i2c_core 12616 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2
ns558 1689 0
pcspkr 1211 0
gameport 6081 2 ns558
serio_raw 2894 0
evdev 5627 15
processor 25023 1 powernow_k8
button 3618 1 nouveau
parport_pc 15761 1
parport 21194 3 ppdev,lp,parport_pc
ext3 92093 5
jbd 31631 1 ext3
mbcache 3840 1 ext3
dm_mod 46914 17
sg 15825 0
sr_mod 10845 0
sd_mod 26321 3
cdrom 25848 1 sr_mod
crc_t10dif 1012 1 sd_mod
usb_storage 30107 0
ata_generic 1943 0
ohci_hcd 16713 0
pata_amd 6676 0
fan 2502 0
sata_nv 15411 2
firewire_ohci 16265 0
thermal 9502 0
ehci_hcd 27708 0
libata 115088 3 ata_generic,pata_amd,sata_nv
firewire_core 32526 1 firewire_ohci
crc_itu_t 1031 2 rt73usb,firewire_core
floppy 41697 0
skge 30017 0
usbcore 99473 10 rt2800usb,rt73usb,rt2x00usb,usbhid,cdc_ether,usbnet,usb_storage,ohci_hcd,ehci_hcd
thermal_sys 9436 3 processor,fan,thermal
nls_base 4521 1 usbcore
forcedeth 40349 0
scsi_mod 103091 5 sg,sr_mod,sd_mod,usb_storage,libata
** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at e400 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d5005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at d5003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d800 [size=16]
Region 5: Memory at d5002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: Memory at d5001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d3000000-d4ffffff
Prefetchable memory behind bridge: d5100000-d51fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] [10de:0161] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ba]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at d2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
05:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4008000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a000 [size=256]
[virtual] Expansion ROM at d5100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
** USB devices:
Bus 002 Device 006: ID 06cb:0009 Synaptics, Inc. Composite TouchPad and TrackPoint
Bus 002 Device 005: ID 04b3:3019 IBM Corp.
Bus 002 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 002 Device 003: ID 04b3:3016 IBM Corp. UltraNav Keyboard Hub
Bus 002 Device 002: ID 1457:5122 First International Computer, Inc. OpenMoko Neo1973 / Neo Freerunner kernel cdc_ether USB network
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 005: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573]
Bus 001 Device 004: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.34-1-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.34-1-686-bigmem depends on:
ii debconf [debconf 1.5.32 Debian configuration management sy
ii initramfs-tools 0.94.4 tools for generating an initramfs
ii linux-base 2.6.34-1~experimental.2 Linux image base package
ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.34-1-686-bigmem recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.10.2-9 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.34-1-686-bigmem suggests:
ii grub-legacy [grub] 0.97-61 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.34 <none> (no description available)
Versions of packages linux-image-2.6.34-1-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.24 Binary firmware for Ralink RT2561,
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.34-1-686-bigmem/prerm/removing-running-kernel-2.6.34-1-686-bigmem: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.34-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.34-1-686-bigmem: true
linux-image-2.6.34-1-686-bigmem/postinst/depmod-error-initrd-2.6.34-1-686-bigmem: false
* linux-image-2.6.34-1-686-bigmem/postinst/missing-firmware-2.6.34-1-686-bigmem:
linux-image-2.6.34-1-686-bigmem/postinst/bootloader-error-2.6.34-1-686-bigmem:
linux-image-2.6.34-1-686-bigmem/postinst/bootloader-test-error-2.6.34-1-686-bigmem:
Reply to: