Bug#584593: linux-image-2.6.32-5-686: kernel update failed to set uuid for home partition
Package: linux-2.6
Version: 2.6.32-15
Severity: important
Tags: sid
An upgrade from 2.6.32-3 to 2.6.32-4 (right now i am running 5) changed some
things concerning devices. They are now adressed via uuid. The post-install
script however failed to set entries correctly in my /etc/crypttab. I have 3
luks-partions. All 3 of them were modified correctly, but the entry for the
last partition (which is my home-partition) went wrong. There was no line
break.
This is how it looked, before i corrected it (i changed the uuids for privacy
reasons in this report):
# hda9_crypt /dev/hda9 none luks
hda9_crypt UUID=xxxxxxxxxxxxxxxxxx none luks
# privat /dev/hda6 /etc/keyfile luks,cipher=aes-cbc-
essiv:sha256
privat UUID=xxxxxxxxxxxxxxxxxxxxxx /etc/keyfile luks,cipher=aes-cbc-
essiv:sha256
# home /dev/hda7 /etc/keyfile luks,cipher=aes-cbc-essiv:sha256home
UUID=xxxxxxxxxxxxxxxxxxxxxxxxxx /etc/keyfile luks,cipher=aes-cbc-essiv:sha256
As you can see, there is no line break in the 3rd entry after "sha256".
Therefore my home-partition could not get mounted. So i corrected the entry by
inserting a line break:
# hda9_crypt /dev/hda9 none luks
hda9_crypt UUID=xxxxxxxxxxxxxxxxxxx none luks
# privat /dev/hda6 /etc/keyfile luks,cipher=aes-cbc-
essiv:sha256
privat UUID=xxxxxxxxxxxxxxxxxxxxxx /etc/keyfile luks,cipher=aes-cbc-
essiv:sha256
# home /dev/hda7 /etc/keyfile luks,cipher=aes-cbc-essiv:sha256
home UUID=xxxxxxxxxxxxxxxxxxxxx /etc/keyfile luks,cipher=aes-cbc-essiv:sha256
Now the system mounts the partition again.
This bug is not a big deal for more experienced users, but could be a great
trouble for newbies.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
** Command line:
root=/dev/mapper/hda9_crypt ro
** Not tainted
** Kernel log:
[ 85.998732] kjournald starting. Commit interval 5 seconds
[ 85.998804] EXT3-fs: mounted filesystem with ordered data mode.
[ 87.730302] udev: starting version 153
[ 89.948626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 90.399738] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 90.693169] NET: Registered protocol family 23
[ 90.712588] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.860183] Marking TSC unstable due to TSC halts in idle
[ 90.873778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 90.873997] ACPI: Power Button [PWRB]
[ 90.874210] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 90.874366] ACPI: Sleep Button [SLPB]
[ 90.888442] processor LNXCPU:00: registered as cooling_device1
[ 90.888823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 90.889027] ACPI: Power Button [PWRF]
[ 90.915693] Switching to clocksource acpi_pm
[ 91.685635] parport_pc 00:09: reported by Plug and Play ACPI
[ 91.685742] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 92.137815] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 92.376040] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 864kHz
[ 93.298670] [drm] Initialized drm 1.1.0 20060810
[ 93.628663] [drm] radeon kernel modesetting enabled.
[ 93.628817] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 93.641908] [drm] radeon: Initializing kernel modesetting.
[ 93.642586] [drm] register mmio base: 0xE9000000
[ 93.642687] [drm] register mmio size: 65536
[ 93.643812] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 93.643891] [drm] Generation 2 PCI interface, using max accessible memory
[ 93.643951] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 93.644071] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 93.644181] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 93.644239] [drm] radeon: VRAM 128M
[ 93.644286] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 93.644336] [drm] radeon: GTT 128M
[ 93.644383] [drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF
[ 93.644470] [drm] radeon: irq initialized.
[ 93.644685] [drm] Detected VRAM RAM=128M, BAR=128M
[ 93.644744] [drm] RAM width 128bits DDR
[ 93.645095] [TTM] Zone kernel: Available graphics memory: 441492 kiB.
[ 93.645197] [TTM] Zone highmem: Available graphics memory: 1037432 kiB.
[ 93.646102] [drm] radeon: 128M of VRAM memory ready
[ 93.646155] [drm] radeon: 128M of GTT memory ready.
[ 93.646443] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 93.646505] [drm] radeon: cp idle (0x10000C03)
[ 93.646615] [drm] Loading R300 Microcode
[ 93.647253] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 93.828870] [drm] radeon: ring at 0x00000000D0000000
[ 93.828946] [drm] ring test succeeded in 0 usecs
[ 93.880181] [drm] radeon: ib pool ready.
[ 93.880357] [drm] ib test succeeded in 0 usecs
[ 93.881109] [drm] Default TV standard: PAL
[ 93.881162] [drm] 27.000000000 MHz TV ref clk
[ 93.881213] [drm] DFP table revision: 4
[ 93.881621] [drm] Default TV standard: PAL
[ 93.881671] [drm] 27.000000000 MHz TV ref clk
[ 93.881828] [drm] Radeon Display Connectors
[ 93.881877] [drm] Connector 0:
[ 93.881923] [drm] VGA
[ 93.881970] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 93.882020] [drm] Encoders:
[ 93.882066] [drm] CRT1: INTERNAL_DAC1
[ 93.882113] [drm] Connector 1:
[ 93.882159] [drm] DVI-I
[ 93.882203] [drm] HPD1
[ 93.882249] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 93.882299] [drm] Encoders:
[ 93.882345] [drm] CRT2: INTERNAL_DAC2
[ 93.882392] [drm] DFP1: INTERNAL_TMDS1
[ 93.882439] [drm] Connector 2:
[ 93.882484] [drm] S-video
[ 93.882528] [drm] Encoders:
[ 93.882574] [drm] TV1: INTERNAL_DAC2
[ 93.938269] C-Media PCI 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 94.134955] [drm] fb mappable at 0xD8040000
[ 94.135011] [drm] vram apper at 0xD8000000
[ 94.135058] [drm] size 5242880
[ 94.135104] [drm] fb depth is 24
[ 94.135150] [drm] pitch is 5120
[ 94.215051] Console: switching to colour frame buffer device 160x64
[ 94.241920] fb0: radeondrmfb frame buffer device
[ 94.242064] registered panic notifier
[ 94.242406] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 95.529534] EXT3 FS on dm-0, internal journal
[ 95.815408] loop: module loaded
[ 100.243391] fuse init (API version 7.13)
[ 100.476372] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 100.607181] kjournald starting. Commit interval 5 seconds
[ 100.608210] EXT3 FS on dm-1, internal journal
[ 100.608360] EXT3-fs: mounted filesystem with ordered data mode.
[ 100.637302] kjournald starting. Commit interval 5 seconds
[ 100.640613] EXT3 FS on dm-2, internal journal
[ 100.640763] EXT3-fs: mounted filesystem with ordered data mode.
[ 102.253795] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 108.802178] lp0: using parport0 (interrupt-driven).
[ 108.838702] ppdev: user-space parallel port driver
[ 112.512036] eth0: no IPv6 routers present
[ 122.195962] tun: Universal TUN/TAP device driver, 1.6
[ 122.195971] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 122.199199] tun0: Disabled Privacy Extensions
[ 195.339269] reportbug[1951]: segfault at 108 ip b6a8755f sp b332b4a0 error 4 in libpango-1.0.so.0.2800.0[b6a66000+42000]
** Model information
not available
** Loaded modules:
Module Size Used by
tun 8760 0
ppdev 4058 0
lp 5570 0
nls_utf8 908 1
nls_cp437 4489 1
vfat 6570 1
fat 34912 1 vfat
ext2 46293 1
fuse 43758 1
loop 9757 0
snd_cmipci 22455 1
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 5045 1 snd_pcm
snd_opl3_lib 6022 1 snd_cmipci
snd_hwdep 4054 1 snd_opl3_lib
snd_mpu401_uart 4067 1 snd_cmipci
radeon 508914 2
ttm 33378 1 radeon
drm_kms_helper 18305 1 radeon
drm 112020 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
snd_seq_midi 3576 0
snd_rawmidi 12505 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
i2c_viapro 4419 0
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
i2c_core 12696 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_viapro
ns558 1599 0
parport_pc 15799 1
gameport 6061 3 snd_cmipci,ns558
parport 22554 3 ppdev,lp,parport_pc
psmouse 44653 0
snd_timer 12258 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 3673 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
via_ircc 13311 0
tpm_tis 5496 0
button 3598 0
processor 26599 1
tpm 8137 1 tpm_tis
shpchp 21220 0
irda 75920 1 via_ircc
pcspkr 1207 0
serio_raw 2916 0
evdev 5609 9
snd 34363 13 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pci_hotplug 18065 1 shpchp
tpm_bios 3569 1 tpm
crc_ccitt 1039 1 irda
soundcore 3450 1 snd
ext3 94204 3
jbd 32169 1 ext3
mbcache 3762 2 ext2,ext3
sha256_generic 10748 6
aes_i586 6816 6
aes_generic 25738 1 aes_i586
cbc 2047 3
dm_crypt 9127 3
dm_mod 46082 7 dm_crypt
sg 15968 0
sr_mod 10770 0
sd_mod 25869 6
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2019 0
fan 2586 0
pata_via 5701 5
ohci_hcd 16880 0
uhci_hcd 16057 0
ehci_hcd 27763 0
8139too 14949 0
libata 115665 2 ata_generic,pata_via
thermal 9206 0
usbcore 98402 4 ohci_hcd,uhci_hcd,ehci_hcd
8139cp 13421 0
thermal_sys 9378 3 processor,fan,thermal
floppy 40923 0
mii 2714 2 8139too,8139cp
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at ea001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ea002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0b.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at ea003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d800 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
Kernel modules: pata_via
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [17af:2016]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) [1002:4172]
Subsystem: Hightech Information System Ltd. Device [17af:2017]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e9010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 5.0.4
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.1-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.24 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: