--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-12
Severity: important
Since version 2.6.33-2-amd64 I have been unable to boot this system.
The system uses an encrypted filesystem but on boot the kernel fails to
locate the volume group containing the filesystem and therefore halts.
-- Package-specific info:
** Kernel log: boot messages should be attached
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-2-amd64 (Debian 2.6.32-8) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Feb 12 00:01:47 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-2-amd64 root=/dev/mapper/finisterre-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dd04d400 (usable)
[ 0.000000] BIOS-e820: 00000000dd04d400 - 00000000dd04f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dd04f400 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0DDC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ddc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdd04d max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dd04d000
[ 0.000000] 0000000000 - 00dd000000 page 2M
[ 0.000000] 00dd000000 - 00dd04d000 page 4k
[ 0.000000] kernel direct mapping tables up to dd04d000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[ 0.000000] RAMDISK: 3763d000 - 37fefc30
[ 0.000000] ACPI: RSDP 00000000000fb9f0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000dd051e00 00074 (v01 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: FACP 00000000dd051c9c 000F4 (v04 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000dd052400 0687E (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000dd060c00 00040
[ 0.000000] ACPI: HPET 00000000dd051f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: DMAR 00000000dd060400 000F8 (v01 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: APIC 00000000dd052000 00068 (v01 DELL M09 27D9091C ASL 00000047)
[ 0.000000] ACPI: ASF! 00000000dd051c00 0006A (v32 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000dd051fc0 0003E (v16 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000dd052300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC 00000000dd05209c 00176 (v01 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000dd051bc0 00028 (v01 DELL M09 27D9091C ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000dd050331 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 0000000000038fff] pages 24
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016689d4] TEXT DATA BSS ==> [0001000000 - 00016689d4]
[ 0.000000] #3 [003763d000 - 0037fefc30] RAMDISK ==> [003763d000 - 0037fefc30]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001669000 - 00016691e0] BRK ==> [0001669000 - 00016691e0]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dd04d
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1036268
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 886917 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dd04d000 - 00000000dd04e000
[ 0.000000] PM: Registered nosave memory: 00000000dd04e000 - 00000000dd04f000
[ 0.000000] PM: Registered nosave memory: 00000000dd04f000 - 00000000dd050000
[ 0.000000] PM: Registered nosave memory: 00000000dd050000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
[ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe60000
[ 0.000000] PM: Registered nosave memory: 00000000ffe60000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005400000 s89880 r8192 d20712 u1048576
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1020035
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-2-amd64 root=/dev/mapper/finisterre-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000551d000 - ffff88000951d000
[ 0.000000] software IO TLB at phys 0x551d000 - 0x951d000
[ 0.000000] Memory: 4002552k/4718592k available (3013k kernel code, 573520k absent, 142520k reserved, 1853k data, 580k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.636 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.27 BogoMIPS (lpj=9574544)
[ 0.004022] Security Framework initialized
[ 0.004027] SELinux: Disabled at boot.
[ 0.004310] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006371] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008264] Mount-cache hash table entries: 256
[ 0.008394] Initializing cgroup subsys ns
[ 0.008397] Initializing cgroup subsys cpuacct
[ 0.008400] Initializing cgroup subsys devices
[ 0.008402] Initializing cgroup subsys freezer
[ 0.008404] Initializing cgroup subsys net_cls
[ 0.008427] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008429] CPU: L2 cache: 6144K
[ 0.008432] CPU 0/0x0 -> Node 0
[ 0.008434] CPU: Physical Processor ID: 0
[ 0.008435] CPU: Processor Core ID: 0
[ 0.008438] mce: CPU supports 6 MCE banks
[ 0.008444] CPU0: Thermal monitoring enabled (TM2)
[ 0.008448] using mwait in idle threads.
[ 0.008450] Performance Events: Core2 events, Intel PMU driver.
[ 0.008454] ... version: 2
[ 0.008455] ... bit width: 40
[ 0.008457] ... generic registers: 2
[ 0.008458] ... value mask: 000000ffffffffff
[ 0.008459] ... max period: 000000007fffffff
[ 0.008461] ... fixed-purpose events: 3
[ 0.008462] ... event mask: 0000000700000003
[ 0.009358] ACPI: Core revision 20090903
[ 0.020072] DMAR: Host address width 36
[ 0.020075] DMAR: DRHD base: 0x000000fed10000 flags: 0x0
[ 0.020080] IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020082] DMAR: DRHD base: 0x000000fed11000 flags: 0x0
[ 0.020087] IOMMU fed11000: ver 1:0 cap c0000020630260 ecap 1000
[ 0.020089] DMAR: DRHD base: 0x000000fed13000 flags: 0x1
[ 0.020093] IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000
[ 0.020096] DMAR: RMRR base: 0x000000dd7e7000 end: 0x000000dd7fffff
[ 0.020098] DMAR: RMRR base: 0x000000ddc00000 end: 0x000000dfffffff
[ 0.020100] DMAR: No ATSR found
[ 0.020109] Setting APIC routing to flat
[ 0.020453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062145] CPU0: Intel(R) Core(TM)2 Duo CPU P9400 @ 2.40GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.148086] CPU1: Intel(R) Core(TM)2 Duo CPU P9400 @ 2.40GHz stepping 0a
[ 0.148093] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152014] Brought up 2 CPUs
[ 0.152016] Total of 2 processors activated (9575.24 BogoMIPS).
[ 0.152889] CPU0 attaching sched-domain:
[ 0.152891] domain 0: span 0-1 level MC
[ 0.152893] groups: 0 1
[ 0.152899] CPU1 attaching sched-domain:
[ 0.152900] domain 0: span 0-1 level MC
[ 0.152902] groups: 1 0
[ 0.153027] devtmpfs: initialized
[ 0.156386] regulator: core version 0.5
[ 0.156427] NET: Registered protocol family 16
[ 0.156506] ACPI: bus type pci registered
[ 0.156567] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.156569] PCI: MCFG area at f8000000 reserved in E820
[ 0.158786] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.158787] PCI: Using configuration type 1 for base access
[ 0.159159] bio: create slab <bio-0> at 0
[ 0.159780] ACPI: EC: Look up EC in DSDT
[ 0.159989] ACPI: BIOS _OSI(Linux) query ignored
[ 0.224167] ACPI: Interpreter enabled
[ 0.224171] ACPI: (supports S0 S3 S4 S5)
[ 0.224187] ACPI: Using IOAPIC for interrupt routing
[ 0.334062] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.335585] ACPI: No dock devices found.
[ 0.355186] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.355238] DMAR: Forcing write-buffer flush capability
[ 0.355266] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.355271] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.355275] pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
[ 0.355305] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.355408] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
[ 0.355416] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
[ 0.355423] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.355474] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.355478] pci 0000:00:19.0: PME# disabled
[ 0.355540] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.355625] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.355711] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.355797] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.355859] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.355863] pci 0000:00:1a.7: PME# disabled
[ 0.355916] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
[ 0.355971] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355975] pci 0000:00:1b.0: PME# disabled
[ 0.356069] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356073] pci 0000:00:1c.0: PME# disabled
[ 0.356159] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.356164] pci 0000:00:1c.1: PME# disabled
[ 0.356251] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.356255] pci 0000:00:1c.3: PME# disabled
[ 0.356327] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.356413] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.356498] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.356586] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.356647] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.356652] pci 0000:00:1d.7: PME# disabled
[ 0.356878] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.356885] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.356892] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.356899] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.356906] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6eaf]
[ 0.356913] pci 0000:00:1f.2: reg 24 io port: [0x6e90-0x6e9f]
[ 0.356976] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
[ 0.356993] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.357052] pci 0000:00:1f.5: reg 10 io port: [0x6eb0-0x6eb7]
[ 0.357059] pci 0000:00:1f.5: reg 14 io port: [0x6eb8-0x6ebb]
[ 0.357066] pci 0000:00:1f.5: reg 18 io port: [0x6ec0-0x6ec7]
[ 0.357073] pci 0000:00:1f.5: reg 1c io port: [0x6ec8-0x6ecb]
[ 0.357080] pci 0000:00:1f.5: reg 20 io port: [0x6ee0-0x6eef]
[ 0.357087] pci 0000:00:1f.5: reg 24 io port: [0xefa0-0xefaf]
[ 0.357310] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
[ 0.357425] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.357436] pci 0000:0c:00.0: PME# disabled
[ 0.364152] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.364213] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.364217] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
[ 0.364225] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.364266] pci 0000:02:01.0: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
[ 0.364320] pci 0000:02:01.0: supports D1 D2
[ 0.364322] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364326] pci 0000:02:01.0: PME# disabled
[ 0.364365] pci 0000:02:01.1: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
[ 0.364420] pci 0000:02:01.1: supports D1 D2
[ 0.364421] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364425] pci 0000:02:01.1: PME# disabled
[ 0.364503] pci 0000:00:1e.0: transparent bridge
[ 0.364509] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
[ 0.364541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.364818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.364935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.365001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.365069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.378511] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.378620] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.378727] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.378833] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.378940] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.379048] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.379156] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.379252] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.379337] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.379349] vgaarb: loaded
[ 0.379395] PCI: Using ACPI for IRQ routing
[ 0.379595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.379599] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.384006] Switching to clocksource tsc
[ 0.385015] pnp: PnP ACPI init
[ 0.385024] ACPI: bus type pnp registered
[ 0.454787] pnp: PnP ACPI: found 13 devices
[ 0.454789] ACPI: ACPI bus type pnp unregistered
[ 0.454797] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.454800] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.454806] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.454810] system 00:09: ioport range 0xcb0-0xcbb has been reserved
[ 0.454813] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.454817] system 00:0a: ioport range 0x900-0x92f has been reserved
[ 0.454819] system 00:0a: ioport range 0x931-0x933 has been reserved
[ 0.454822] system 00:0a: ioport range 0x935-0x97f has been reserved
[ 0.454824] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.454827] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 0.454829] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 0.454834] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.454836] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 0.454838] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[ 0.454841] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 0.454843] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.454846] system 00:0b: ioport range 0x1100-0x111f has been reserved
[ 0.454848] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 0.454850] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.454855] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.454857] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.454860] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 0.454862] system 00:0c: iomem range 0xe0000-0xfffff has been reserved
[ 0.454865] system 00:0c: iomem range 0x100000-0xdd04d3ff could not be reserved
[ 0.454867] system 00:0c: iomem range 0xdd04d400-0xddafffff could not be reserved
[ 0.454870] system 00:0c: iomem range 0xddb00000-0xddbfffff has been reserved
[ 0.454872] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.454875] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.454877] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.454880] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.454885] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.454887] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.454890] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.454892] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.454895] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.454897] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.454900] system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.454902] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.454905] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.459589] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.459592] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.459598] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf03fffff
[ 0.459602] pci 0000:00:1c.0: PREFETCH window: 0x000000f0400000-0x000000f05fffff
[ 0.459609] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.459613] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.459618] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.459622] pci 0000:00:1c.1: PREFETCH window: 0x000000f0600000-0x000000f07fffff
[ 0.459629] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
[ 0.459632] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.459638] pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff
[ 0.459642] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.459649] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.459651] pci 0000:00:1e.0: IO window: disabled
[ 0.459656] pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff
[ 0.459660] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.459675] alloc irq_desc for 16 on node -1
[ 0.459677] alloc kstat_irqs on node -1
[ 0.459681] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.459685] pci 0000:00:1c.0: setting latency timer to 64
[ 0.459694] alloc irq_desc for 17 on node -1
[ 0.459695] alloc kstat_irqs on node -1
[ 0.459698] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.459703] pci 0000:00:1c.1: setting latency timer to 64
[ 0.459711] alloc irq_desc for 19 on node -1
[ 0.459713] alloc kstat_irqs on node -1
[ 0.459716] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.459720] pci 0000:00:1c.3: setting latency timer to 64
[ 0.459727] pci 0000:00:1e.0: setting latency timer to 64
[ 0.459731] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.459733] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.459735] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.459737] pci_bus 0000:0b: resource 1 mem: [0xf0200000-0xf03fffff]
[ 0.459739] pci_bus 0000:0b: resource 2 pref mem [0xf0400000-0xf05fffff]
[ 0.459741] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.459743] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.459745] pci_bus 0000:0c: resource 2 pref mem [0xf0600000-0xf07fffff]
[ 0.459747] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff]
[ 0.459749] pci_bus 0000:0d: resource 1 mem: [0xf6600000-0xf68fffff]
[ 0.459751] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.459753] pci_bus 0000:02: resource 1 mem: [0xf6500000-0xf65fffff]
[ 0.459755] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.459757] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.459779] NET: Registered protocol family 2
[ 0.459917] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.460803] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.463701] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.464198] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.464201] TCP reno registered
[ 0.464303] NET: Registered protocol family 1
[ 0.464320] pci 0000:00:02.0: Boot video device
[ 0.464527] Unpacking initramfs...
[ 0.663398] Freeing initrd memory: 9931k freed
[ 0.666934] Simple Boot Flag at 0x79 set to 0x1
[ 0.667239] audit: initializing netlink socket (disabled)
[ 0.667251] type=2000 audit(1273243027.663:1): initialized
[ 0.667576] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.668748] VFS: Disk quotas dquot_6.5.2
[ 0.668793] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.668859] msgmni has been set to 7836
[ 0.669017] alg: No test for stdrng (krng)
[ 0.669058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.669060] io scheduler noop registered
[ 0.669062] io scheduler anticipatory registered
[ 0.669063] io scheduler deadline registered
[ 0.669091] io scheduler cfq registered (default)
[ 0.669213] alloc irq_desc for 24 on node -1
[ 0.669215] alloc kstat_irqs on node -1
[ 0.669229] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.669240] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.669378] alloc irq_desc for 25 on node -1
[ 0.669379] alloc kstat_irqs on node -1
[ 0.669387] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.669397] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.669529] alloc irq_desc for 26 on node -1
[ 0.669531] alloc kstat_irqs on node -1
[ 0.669539] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.669548] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.670832] Linux agpgart interface v0.103
[ 0.670834] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.671126] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.671177] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.671735] i8042.c: Warning: Keylock active.
[ 0.675118] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.675123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.675210] mice: PS/2 mouse device common for all mice
[ 0.675253] rtc_cmos 00:03: RTC can wake from S4
[ 0.675282] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.675311] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.675321] cpuidle: using governor ladder
[ 0.675323] cpuidle: using governor menu
[ 0.675327] No iBFT detected.
[ 0.675591] TCP cubic registered
[ 0.675682] NET: Registered protocol family 10
[ 0.676055] lo: Disabled Privacy Extensions
[ 0.676277] Mobile IPv6
[ 0.676280] NET: Registered protocol family 17
[ 0.676344] PM: Resume from disk failed.
[ 0.676347] registered taskstats version 1
[ 0.676848] rtc_cmos 00:03: setting system clock to 2010-05-07 14:37:07 UTC (1273243027)
[ 0.676898] Freeing unused kernel memory: 580k freed
[ 0.677098] Write protecting the kernel read-only data: 4140k
[ 0.677460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.765206] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.765212] ACPI: Thermal Zone [THM] (55 C)
[ 0.819035] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.820810] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.823312] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.823314] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.854301] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.856805] ACPI: Lid Switch [LID]
[ 0.856953] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 0.856961] ACPI: Power Button [PBTN]
[ 0.857002] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 0.857006] ACPI: Sleep Button [SBTN]
[ 0.872017] usbcore: registered new interface driver usbfs
[ 0.872041] usbcore: registered new interface driver hub
[ 0.880227] usbcore: registered new device driver usb
[ 0.881336] SCSI subsystem initialized
[ 0.884422] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.884472] alloc irq_desc for 22 on node -1
[ 0.884474] alloc kstat_irqs on node -1
[ 0.884480] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.884489] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.884581] alloc irq_desc for 27 on node -1
[ 0.884583] alloc kstat_irqs on node -1
[ 0.884593] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 0.895724] firewire_ohci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.911630] libata version 3.00 loaded.
[ 0.911703] [drm] Initialized drm 1.1.0 20060810
[ 0.926380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.927604] sdhci: Secure Digital Host Controller Interface driver
[ 0.927606] sdhci: Copyright(c) Pierre Ossman
[ 0.930492] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.971950] firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.10
[ 0.971967] sdhci-pci 0000:02:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.972002] alloc irq_desc for 18 on node -1
[ 0.972004] alloc kstat_irqs on node -1
[ 0.972010] sdhci-pci 0000:02:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.974067] Registered led device: mmc0::
[ 0.975085] mmc0: SDHCI controller on PCI [0000:02:01.1] using DMA
[ 0.992344] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:cf:8b:3c
[ 0.992346] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.992371] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 3002ff-0ff
[ 0.992395] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.992399] i915 0000:00:02.0: setting latency timer to 64
[ 1.005734] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.005736] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.023051] alloc irq_desc for 28 on node -1
[ 1.023053] alloc kstat_irqs on node -1
[ 1.023061] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 1.023065] [drm] set up 31M of stolen space
[ 1.473051] firewire_core: created device fw0: GUID 354fc00035254090, S400
[ 1.665649] [drm] TV-25: set mode NTSC 480i 0
[ 1.870748] [drm] LVDS-8: set mode 1280x800 c
[ 1.982285] Console: switching to colour frame buffer device 160x50
[ 1.984735] fb0: inteldrmfb frame buffer device
[ 1.984736] registered panic notifier
[ 2.013401] acpi device:35: registered as cooling_device0
[ 2.014043] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 2.014049] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.014092] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[ 2.014150] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input6
[ 2.014154] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 2.014171] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.014192] ata_piix 0000:00:1f.2: version 2.13
[ 2.014206] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.014212] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.014254] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.014442] scsi0 : ata_piix
[ 2.016303] scsi1 : ata_piix
[ 2.017710] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19
[ 2.017715] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19
[ 2.017744] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.017764] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.017767] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.017786] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.017814] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.021690] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.021705] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 2.037007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.037025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.037027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037029] usb usb1: Product: EHCI Host Controller
[ 2.037031] usb usb1: Manufacturer: Linux 2.6.32-2-amd64 ehci_hcd
[ 2.037033] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.037085] usb usb1: configuration #1 chosen from 1 choice
[ 2.037112] hub 1-0:1.0: USB hub found
[ 2.037118] hub 1-0:1.0: 6 ports detected
[ 2.037170] alloc irq_desc for 20 on node -1
[ 2.037172] alloc kstat_irqs on node -1
[ 2.037177] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.037183] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.037186] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.037193] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 2.037224] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 2.037255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.037258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037259] usb usb2: Product: UHCI Host Controller
[ 2.037261] usb usb2: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.037263] usb usb2: SerialNumber: 0000:00:1a.0
[ 2.037309] usb usb2: configuration #1 chosen from 1 choice
[ 2.037335] hub 2-0:1.0: USB hub found
[ 2.037340] hub 2-0:1.0: 2 ports detected
[ 2.037390] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.037395] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.192020] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.192050] scsi2 : ata_piix
[ 2.192125] scsi3 : ata_piix
[ 2.192278] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19
[ 2.192282] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19
[ 2.192361] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.192372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.192376] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.192383] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 2.192406] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.196278] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.196283] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 2.212010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.212023] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.212025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212027] usb usb3: Product: EHCI Host Controller
[ 2.212029] usb usb3: Manufacturer: Linux 2.6.32-2-amd64 ehci_hcd
[ 2.212030] usb usb3: SerialNumber: 0000:00:1d.7
[ 2.212076] usb usb3: configuration #1 chosen from 1 choice
[ 2.212100] hub 3-0:1.0: USB hub found
[ 2.212106] hub 3-0:1.0: 6 ports detected
[ 2.212156] alloc irq_desc for 21 on node -1
[ 2.212158] alloc kstat_irqs on node -1
[ 2.212162] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.212168] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.212171] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.212178] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.212210] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 2.212239] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212243] usb usb4: Product: UHCI Host Controller
[ 2.212245] usb usb4: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.212247] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.212292] usb usb4: configuration #1 chosen from 1 choice
[ 2.212316] hub 4-0:1.0: USB hub found
[ 2.212322] hub 4-0:1.0: 2 ports detected
[ 2.212362] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.212370] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.212373] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.212379] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.212403] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 2.212433] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212435] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212437] usb usb5: Product: UHCI Host Controller
[ 2.212438] usb usb5: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.212440] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.212484] usb usb5: configuration #1 chosen from 1 choice
[ 2.212506] hub 5-0:1.0: USB hub found
[ 2.212511] hub 5-0:1.0: 2 ports detected
[ 2.212551] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.212557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.212560] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.212565] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.212589] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 2.212618] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212620] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212622] usb usb6: Product: UHCI Host Controller
[ 2.212624] usb usb6: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.212625] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.212670] usb usb6: configuration #1 chosen from 1 choice
[ 2.212693] hub 6-0:1.0: USB hub found
[ 2.212697] hub 6-0:1.0: 2 ports detected
[ 2.212740] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.212746] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.212749] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.212755] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.212779] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 2.212807] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212809] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212811] usb usb7: Product: UHCI Host Controller
[ 2.212812] usb usb7: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.212814] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.212863] usb usb7: configuration #1 chosen from 1 choice
[ 2.212887] hub 7-0:1.0: USB hub found
[ 2.212892] hub 7-0:1.0: 2 ports detected
[ 2.212930] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.212935] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.212938] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.212944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.212968] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 2.212997] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.213005] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.213007] usb usb8: Product: UHCI Host Controller
[ 2.213008] usb usb8: Manufacturer: Linux 2.6.32-2-amd64 uhci_hcd
[ 2.213010] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.213055] usb usb8: configuration #1 chosen from 1 choice
[ 2.213076] hub 8-0:1.0: USB hub found
[ 2.213081] hub 8-0:1.0: 2 ports detected
[ 2.248131] Uniform Multi-Platform E-IDE driver
[ 2.496052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.496167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500494] ata1.00: ATA-8: WDC WD1600BJKT-75F4T0, 11.01A11, max UDMA/133
[ 2.500497] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 2.508390] ata1.00: configured for UDMA/133
[ 2.508471] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BJKT-7 11.0 PQ: 0 ANSI: 5
[ 2.516244] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D200, max UDMA/100
[ 2.516257] ata2.00: applying bridge limits
[ 2.535046] ata4: SATA link down (SStatus 4 SControl 300)
[ 2.556268] ata2.00: configured for UDMA/100
[ 2.561824] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D200 PQ: 0 ANSI: 5
[ 2.663037] ata3: SATA link down (SStatus 4 SControl 300)
[ 2.672569] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.672605] sd 0:0:0:0: [sda] Write Protect is off
[ 2.672607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.672626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.672726] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.681111] Uniform CD-ROM driver Revision: 3.20
[ 2.681176] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.700009] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.706169] sda1 sda2
[ 2.706330] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.709553] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.709775] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.867836] device-mapper: uevent: version 1.0.3
[ 2.867949] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.877384] usb 2-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.877387] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.877389] usb 2-1: Product: BCM2046B1
[ 2.877390] usb 2-1: Manufacturer: Broadcom
[ 2.877447] usb 2-1: configuration #1 chosen from 1 choice
[ 2.880415] hub 2-1:1.0: USB hub found
[ 2.882389] hub 2-1:1.0: 3 ports detected
[ 3.124009] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.302600] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 3.302602] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.302604] usb 5-1: Product: 5880
[ 3.302605] usb 5-1: Manufacturer: Broadcom Corp
[ 3.302607] usb 5-1: SerialNumber: 0123456789ABCD
[ 3.302660] usb 5-1: configuration #0 chosen from 1 choice
[ 3.302662] usb 5-1: config 0 descriptor??
[ 3.389464] usb 2-1.1: new full speed USB device using uhci_hcd and address 3
[ 3.511483] usb 2-1.1: New USB device found, idVendor=413c, idProduct=8161
[ 3.511485] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.511528] usb 2-1.1: configuration #1 chosen from 1 choice
[ 3.520669] usbcore: registered new interface driver hiddev
[ 3.523664] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
[ 3.523697] generic-usb 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1/input0
[ 3.523711] usbcore: registered new interface driver usbhid
[ 3.523713] usbhid: v2.6:USB HID core driver
[ 3.589496] usb 2-1.2: new full speed USB device using uhci_hcd and address 4
[ 3.718711] usb 2-1.2: New USB device found, idVendor=413c, idProduct=8162
[ 3.718713] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.718758] usb 2-1.2: configuration #1 chosen from 1 choice
[ 3.726741] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input8
[ 3.726792] generic-usb 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.2/input0
[ 20.044363] Intel AES-NI instructions are not detected.
[ 20.632109] PM: Starting manual resume from disk
[ 20.632112] PM: Resume from partition 254:2
[ 20.632113] PM: Checking hibernation image.
[ 20.632323] PM: Error -22 checking image file
[ 20.632324] PM: Resume from disk failed.
[ 20.686543] kjournald starting. Commit interval 5 seconds
[ 20.686547] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.643307] udev: starting version 153
[ 23.555571] ACPI: SSDT 00000000dd05099d 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 23.556001] ACPI: SSDT 00000000dd050df5 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 23.556447] Monitor-Mwait will be used to enter C-1 state
[ 23.556465] Monitor-Mwait will be used to enter C-2 state
[ 23.556480] Monitor-Mwait will be used to enter C-3 state
[ 23.556485] Marking TSC unstable due to TSC halts in idle
[ 23.556551] processor LNXCPU:00: registered as cooling_device1
[ 23.557003] ACPI: SSDT 00000000dd050c1e 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 23.557277] ACPI: SSDT 00000000dd0513bb 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 23.558267] processor LNXCPU:01: registered as cooling_device2
[ 23.570205] Switching to clocksource hpet
[ 23.591074] ACPI: Battery Slot [BAT0] (battery present)
[ 23.591105] ACPI: WMI: Mapper loaded
[ 23.591164] ACPI: AC Adapter [AC] (off-line)
[ 23.591300] ACPI: Battery Slot [BAT1] (battery absent)
[ 23.793796] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 23.878034] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 24.434075] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 24.434286] cfg80211: Using static regulatory domain info
[ 24.434288] cfg80211: Regulatory domain: US
[ 24.434289] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.434292] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 24.434294] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.434296] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.434298] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.434300] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.434302] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 24.434308] cfg80211: Calling CRDA for country: US
[ 24.527409] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10
[ 24.544742] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 25.040314] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 25.040314] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 25.040460] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 25.040489] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 25.040563] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 25.079913] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 25.079971] alloc irq_desc for 29 on node -1
[ 25.079973] alloc kstat_irqs on node -1
[ 25.079992] iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X
[ 25.221555] usb 2-1.3: new full speed USB device using uhci_hcd and address 5
[ 25.281204] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 25.340477] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 25.340518] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 25.354576] usb 2-1.3: New USB device found, idVendor=413c, idProduct=8160
[ 25.354580] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 25.354583] usb 2-1.3: Product: Dell Wireless 365 Bluetooth Module
[ 25.354585] usb 2-1.3: Manufacturer: Dell Computer Corp
[ 25.354683] usb 2-1.3: configuration #1 chosen from 1 choice
[ 25.509092] Bluetooth: Core ver 2.15
[ 25.509317] NET: Registered protocol family 31
[ 25.509319] Bluetooth: HCI device and connection manager initialized
[ 25.509321] Bluetooth: HCI socket layer initialized
[ 25.532244] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 25.586015] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 25.586070] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 25.586122] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 25.586172] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 25.654550] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 25.654652] usbcore: registered new interface driver btusb
[ 27.131535] EXT3 FS on dm-1, internal journal
[ 27.299926] loop: module loaded
[ 27.871977] Adding 6377464k swap on /dev/mapper/finisterre-swap_1. Priority:-1 extents:1 across:6377464k
[ 29.688006] fuse init (API version 7.13)
[ 30.158540] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 36.270494] Bluetooth: L2CAP ver 2.14
[ 36.270500] Bluetooth: L2CAP socket layer initialized
[ 36.303619] Bluetooth: RFCOMM TTY layer initialized
[ 36.303629] Bluetooth: RFCOMM socket layer initialized
[ 36.303633] Bluetooth: RFCOMM ver 1.11
[ 36.424853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.424860] Bluetooth: BNEP filters: protocol multicast
[ 36.638811] Bridge firewalling registered
[ 36.665152] Bluetooth: SCO (Voice Link) ver 0.6
[ 36.665154] Bluetooth: SCO socket layer initialized
[ 38.304567] lp: driver loaded but no devices found
[ 38.355773] ppdev: user-space parallel port driver
[ 38.936780] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 38.993164] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 38.994670] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.023035] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 39.227069] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[ 39.378298] Registered led device: iwl-phy0::radio
[ 39.378441] Registered led device: iwl-phy0::assoc
[ 39.378970] Registered led device: iwl-phy0::RX
[ 39.379102] Registered led device: iwl-phy0::TX
[ 39.387171] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 42.413086] [drm] TV-25: set mode NTSC 480i 0
[ 42.593234] [drm] TV-25: set mode NTSC 480i 0
[ 42.954588] [drm] TV-25: set mode NTSC 480i 0
[ 43.135293] [drm] TV-25: set mode NTSC 480i 0
[ 67.139092] [drm] TV-25: set mode NTSC 480i 0
[ 67.319191] [drm] TV-25: set mode NTSC 480i 0
[ 67.654855] [drm] TV-25: set mode NTSC 480i 0
[ 67.836120] [drm] TV-25: set mode NTSC 480i 0
[ 68.209474] [drm] TV-25: set mode NTSC 480i 0
[ 68.389437] [drm] TV-25: set mode NTSC 480i 0
[ 71.938047] [drm] TV-25: set mode NTSC 480i 0
[ 72.123232] [drm] TV-25: set mode NTSC 480i 0
[ 80.599482] wlan0: direct probe to AP 00:18:6e:bb:59:41 (try 1)
[ 80.604340] wlan0: direct probe responded
[ 80.604348] wlan0: authenticate with AP 00:18:6e:bb:59:41 (try 1)
[ 80.804049] wlan0: authenticate with AP 00:18:6e:bb:59:41 (try 2)
[ 81.004066] wlan0: authenticate with AP 00:18:6e:bb:59:41 (try 3)
[ 81.004696] wlan0: authenticated
[ 81.004736] wlan0: associate with AP 00:18:6e:bb:59:41 (try 1)
[ 81.018413] wlan0: RX AssocResp from 00:18:6e:bb:59:41 (capab=0x11 status=0 aid=6)
[ 81.018420] wlan0: associated
[ 81.030747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 81.030868] cfg80211: Calling CRDA for country: GB
[ 91.988254] wlan0: no IPv6 routers present
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E4300
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A11
board_vendor: Dell Inc.
board_name: 0D201R
board_version:
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ef98 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6600000-f68fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: f6500000-f65fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:2928] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=16]
Region 5: I/O ports at 6e90 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:292d] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=16]
Region 5: I/O ports at efa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f65ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Device [1028:024d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f65ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f69fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
** USB devices:
Bus 005 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 413c:8160 Dell Computer Corp.
Bus 002 Device 004: ID 413c:8162 Dell Computer Corp.
Bus 002 Device 003: ID 413c:8161 Dell Computer Corp.
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-12 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-12 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.24 Binary firmware for Intel Wireless
ii firmware-linux 0.24 Binary firmware for various driver
ii firmware-linux-nonfree 0.24 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
--- End Message ---