Bug#575207: linux-image-2.6.33-2-686: budget.ko causes kernel Oops with TT-budget S2-1600 DVB pci card
Package: linux-2.6
Version: 2.6.33-1~experimental.4
Severity: normal
Plugging a TT-budget S2-1600 DVb pci card into my system causes a kernel
Oops while loading the budget.ko module. The system continues to boot
but the card is unusable. With latest kernel 2.6.32 package the system
stops at boot time with a kernel panic while loading budget.ko.
-- Package-specific info:
** Version:
Linux version 2.6.33-2-686 (Debian 2.6.33-1~experimental.4) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Mar 18 07:30:30 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.33-2-686 root=/dev/mapper/system-root ro quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[ 2.472362] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.472663] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 2.519311] usbcore: registered new interface driver hiddev
[ 2.535187] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 2.535442] generic-usb 0003:049F:0051.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 2.567625] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 2.568403] generic-usb 0003:049F:0051.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 2.568734] usbcore: registered new interface driver usbhid
[ 2.568740] usbhid: USB HID core driver
[ 2.897873] md: raid1 personality registered for level 1
[ 2.973195] md: md0 stopped.
[ 2.979797] md: bind<sdc>
[ 2.981272] md: bind<sdb>
[ 2.988393] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.988445] md0: detected capacity change from 0 to 160041795584
[ 2.992616] md0:
[ 3.025325] device-mapper: uevent: version 1.0.3
[ 3.026488] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 3.043118] unknown partition table
[ 3.459304] PM: Starting manual resume from disk
[ 3.459313] PM: Resume from partition 253:1
[ 3.459317] PM: Checking hibernation image.
[ 3.474166] PM: Error -22 checking image file
[ 3.474172] PM: Resume from disk failed.
[ 3.487075] JFS: nTxBlock = 3958, nTxLock = 31666
[ 5.586654] udev: starting version 151
[ 6.735101] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.967739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.150907] intel_rng: Firmware space is locked read-only. If you can't or
[ 7.150912] intel_rng: don't want to disable this in firmware setup, and if
[ 7.150915] intel_rng: you are certain that your system has a functional
[ 7.150917] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 7.200137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.496390] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.496453] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.163922] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.172821] saa7146: register extension 'budget dvb'.
[ 8.172883] budget dvb 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.172949] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.172978] saa7146: found saa7146 @ mem e0916000 (revision 1, irq 16) (0x13c2,0x101c).
[ 8.172992] saa7146 (0): dma buffer size 192512
[ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29
[ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 8.562047] DVB: Unable to find symbol stv090x_attach()
[ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac
[ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core]
[ 8.562338] *pde = 00000000
[ 8.562417] Oops: 0000 [#1] SMP
[ 8.562532] last sysfs file: /sys/devices/virtual/net/lo/operstate
[ 8.562581] Modules linked in: snd_intel8x0(+) snd_ac97_codec ac97_bus budget(+) snd_pcsp budget_core saa7146 ttpci_eeprom dvb_core snd_pcm snd_timer snd parport_pc soundcore parport snd_page_alloc shpchp tpm_tis tpm tpm_bios rng_core pci_hotplug i2c_i801 serio_raw psmouse i2c_core processor evdev jfs dm_mod raid1 md_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif ata_generic ata_piix uhci_hcd e100 libata intel_agp mii floppy ehci_hcd scsi_mod usbcore agpgart nls_base button thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[ 8.564753]
[ 8.564798] Pid: 537, comm: modprobe Not tainted 2.6.33-2-686 #1 07E8h/Evo D310
[ 8.564860] EIP: 0060:[<e08b04a3>] EFLAGS: 00010246 CPU: 0
[ 8.564921] EIP is at dvb_frontend_detach+0x4/0x67 [dvb_core]
[ 8.564979] EAX: 00000000 EBX: 00000000 ECX: d75c9e88 EDX: e0904b79
[ 8.565038] ESI: 00000000 EDI: e0904b63 EBP: 00000000 ESP: d75c9e7c
[ 8.565096] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 8.565155] Process modprobe (pid: 537, ti=d75c8000 task=ddca0000 task.ti=d75c8000)
[ 8.565225] Stack:
[ 8.565277] 00000000 d704f000 e0903e79 e0905304 e08d70e9 e08d7e65 e0916000 00000001
[ 8.565424] <0> 00000010 000013c2 0000101c d755ab00 fffffff4 df1aa000 df0a2800 e08d71a0
[ 8.565424] <0> 00000000 d743f960 00000000 d755ab64 e0905304 e0904f54 e0904fac df0a2800
[ 8.565424] Call Trace:
[ 8.565424] [<e0903e79>] ? budget_attach+0xb49/0xbf5 [budget]
[ 8.565424] [<e08d70e9>] ? saa7146_init_one+0x2f7/0x49d [saa7146]
[ 8.565424] [<e08d71a0>] ? saa7146_init_one+0x3ae/0x49d [saa7146]
[ 8.565424] [<c114190d>] ? local_pci_probe+0xb/0xc
[ 8.565424] [<c114224b>] ? pci_device_probe+0x41/0x63
[ 8.565424] [<c11a5d76>] ? driver_probe_device+0x8a/0x11e
[ 8.565424] [<c11a5e4a>] ? __driver_attach+0x40/0x5b
[ 8.565424] [<c11a57b6>] ? bus_for_each_dev+0x37/0x5f
[ 8.565424] [<c11a5c49>] ? driver_attach+0x11/0x13
[ 8.565424] [<c11a5e0a>] ? __driver_attach+0x0/0x5b
[ 8.565424] [<c11a5274>] ? bus_add_driver+0x99/0x1c7
[ 8.565424] [<c11a607b>] ? driver_register+0x87/0xe0
[ 8.565424] [<c114241c>] ? __pci_register_driver+0x33/0x89
[ 8.565424] [<e0908000>] ? budget_init+0x0/0xa [budget]
[ 8.565424] [<c100113e>] ? do_one_initcall+0x55/0x155
[ 8.565424] [<c1058ee9>] ? sys_init_module+0xa7/0x1d7
[ 8.565424] [<c1002f9f>] ? sysenter_do_call+0x12/0x28
[ 8.565424] Code: c3 8b 46 10 83 7c 38 2c 00 0f 84 26 ff ff ff e9 55 ff ff ff 8b 44 24 08 39 d0 7d 08 05 40 42 0f 00 29 d0 c3 29 d0 c3 56 89 c6 53 <8b> 90 ac 00 00 00 85 d2 74 0d ff d2 8b 86 ac 00 00 00 e8 b5 6f
[ 8.565424] EIP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] SS:ESP 0068:d75c9e7c
[ 8.565424] CR2: 00000000000000ac
[ 8.570180] ---[ end trace e652d5c9d9325eb9 ]---
[ 8.700029] intel8x0_measure_ac97_clock: measured 54819 usecs (2641 samples)
[ 8.700097] intel8x0: clocking to 48000
[ 11.848340] loop: module loaded
[ 12.127973] Adding 1949688k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:1949688k
[ 13.431904] kjournald starting. Commit interval 5 seconds
[ 13.432444] EXT3-fs (sda1): using internal journal
[ 13.432577] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 13.679746] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 13.682508] SGI XFS Quota Management subsystem
[ 13.782390] XFS mounting filesystem dm-3
[ 14.402944] Ending clean XFS mount for filesystem: dm-3
[ 16.129044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.132168] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 16.132385] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
not available
** Loaded modules:
Module Size Used by
xfs 659529 1
exportfs 2622 1 xfs
ext3 93823 1
jbd 32613 1 ext3
mbcache 3762 1 ext3
loop 9772 0
snd_intel8x0 19563 0
snd_ac97_codec 77554 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
budget 15097 1
snd_pcsp 5413 0
budget_core 5188 1 budget
saa7146 10131 2 budget,budget_core
ttpci_eeprom 1224 1 budget_core
dvb_core 63501 2 budget,budget_core
snd_pcm 47219 3 snd_intel8x0,snd_ac97_codec,snd_pcsp
snd_timer 12349 1 snd_pcm
snd 34703 5 snd_intel8x0,snd_ac97_codec,snd_pcsp,snd_pcm,snd_timer
parport_pc 15819 0
soundcore 3642 1 snd
parport 22250 1 parport_pc
snd_page_alloc 5097 2 snd_intel8x0,snd_pcm
shpchp 21220 0
tpm_tis 5496 0
tpm 8129 1 tpm_tis
tpm_bios 3557 1 tpm
rng_core 2350 0
pci_hotplug 18127 1 shpchp
i2c_i801 6458 0
serio_raw 3104 0
psmouse 38755 0
i2c_core 12265 4 budget,budget_core,ttpci_eeprom,i2c_i801
processor 25817 0
evdev 5629 3
jfs 134906 3
dm_mod 47420 15
raid1 16641 1
md_mod 71423 2 raid1
usbhid 28135 0
hid 50985 1 usbhid
sg 16151 0
sr_mod 10926 0
cdrom 26450 1 sr_mod
sd_mod 26607 5
crc_t10dif 1012 1 sd_mod
ata_generic 2043 0
ata_piix 17149 4
uhci_hcd 16149 0
e100 22649 0
libata 115325 2 ata_generic,ata_piix
intel_agp 20257 1
mii 2714 1 e100
floppy 41202 0
ehci_hcd 27870 0
scsi_mod 102273 4 sg,sr_mod,sd_mod,libata
usbcore 100734 4 usbhid,uhci_hcd,ehci_hcd
agpgart 19551 1 intel_agp
nls_base 4541 2 jfs,usbcore
button 3598 0
thermal 9405 0
fan 2506 0
thermal_sys 9402 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fc400000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 2440 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2460 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc480000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fc500000-fc7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 24c0 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:00b8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Compaq Computer Corporation Analog Devices Inc. codec [SoundMAX] [0e11:00b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 2400 [size=64]
Region 2: Memory at fc480400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fc480600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
05:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Device [13c2:101c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc501000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget dvb
05:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VM (LOM) Ethernet Controller [8086:103b] (rev 81)
Subsystem: Compaq Computer Corporation Device [0e11:0012]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 049f:0051 Compaq Computer Corp. KU-0133 Easy Access Interner Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.33-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.33-2-686 depends on:
ii debconf [debconf 1.5.30 Debian configuration management sy
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-base 2.6.33-1~experimental.4 Linux image base package
ii module-init-tool 3.12~pre2-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.33-2-686 recommends:
ii firmware-linux-free 2.6.32-10 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.33-2-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.33 <none> (no description available)
Versions of packages linux-image-2.6.33-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.23 Binary firmware for various driver
ii firmware-linux-nonfree 0.23 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.33-2-686/postinst/depmod-error-initrd-2.6.33-2-686: false
linux-image-2.6.33-2-686/postinst/bootloader-test-error-2.6.33-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.33-2-686/prerm/would-invalidate-boot-loader-2.6.33-2-686: true
linux-image-2.6.33-2-686/prerm/removing-running-kernel-2.6.33-2-686: true
linux-image-2.6.33-2-686/postinst/missing-firmware-2.6.33-2-686:
linux-image-2.6.33-2-686/postinst/bootloader-error-2.6.33-2-686:
Reply to: