Bug#406419: [powerpc, CHRP] 2.6 kernel does not boot on IBM RS/6000 43p 150
On Sun, Nov 30, 2008 at 06:11:15PM +0100, Ulrich Teichert wrote:
> Hi Moritz,
>
> >Does this error still occur with more recent kernel versions, e.g.
> >with the Lenny d-i RC1?
>
> With the d-i RC1 it's even worse on the console:
>
> ----------------- client boot log---------------------------
> 0 > boot net:192.168.22.51,vmlinuz-chrp.initrd,192.168.22.58
> BOOTP S = 1
> FILE: vmlinuz-chrp.initrd
> Load Addr=0x4000 Max Size=0xbfc000
> FINAL Packet Count = 13774
> FINAL File Size = 7052236 bytes.
>
> zImage starting: loaded at 0x00400000 (sp: 0x0121fea0)
> Allocating 0x431e28 bytes for kernel ...
> OF version = 'IBM,SPH00221'
> gunzipping (0x01400000 <- 0x00407000:0x005c14cf)...done 0x3db000 bytes
> Attached initrd image at 0x005c2000-0x00aa8b3d
> initrd head: 0x1f8b0808
>
> Linux/PowerPC load:
> Finalizing device tree... using OF tree (promptr=00c1b320)
> OF stdout device is: /pci@fef00000/isa@b/serial@i3f8
> command line: console=ttyS0,9600 console=tty0
> memory layout at init:
> alloc_bottom : 01836000
> alloc_top : 30000000
> alloc_top_hi : 40000000
> rmo_top : 30000000
> ram_top : 40000000
> Looking for displays
> found display : /pci@fee00000/display@b, opening ... done
> instantiating rtas at 0x2ffb5000 ... done
> copying OF device tree ...
> Building dt strings...
> Building dt structure...
> Device tree strings 0x01837000 -> 0x01837f15
> Device tree struct 0x01838000 -> 0x0183d000
> Calling quiesce ...
> returning from prom_init
> ----------------- client boot log---------------------------
>
> That's it. The command line seem to be valid (ttyS0), but it's opening a
> display? Sounds strange to me. Unfortunately, I do not have a matching
> monitor available anymore, so I can't see if something is displayed there.
>
> I'll try the daily build next, If you like,
Do you still own such a system? If so, could you try a daily build of
the Squeeze d-i?
Cheers,
Moritz
Reply to: