[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#528989: marked as done (linux-image-2.6.26-2-amd64: Kernel errors when inserting memory card)



Your message dated Mon, 15 Feb 2010 01:57:35 +0100
with message-id <20100215005734.GA15740@galadriel.inutil.org>
and subject line Re: linux-image-2.6.26-2-amd64: Kernel errors when inserting memory card
has caused the Debian Bug report #528989,
regarding linux-image-2.6.26-2-amd64: Kernel errors when inserting memory card
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
528989: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=528989
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-amd64
Version: 2.6.26-15lenny2
Severity: important

Hello,

I'm using Lenny (AMD64 with proposed updates) on a HP Pavilion dv9668eg laptop with
an internal card reader and a Turion X2 TL-60 dual core processor.
See also the "lspci" ans "lsmod" outputs below.

Whenever a SD or SDHC card is inserted into the card reader,
the system fails randomly, but always, after some
subsequent accesses with one of these symptoms:

- Kernel Oops messages
- Fsck erronneously reporting a damages file system
- Complete system freezes (only "Alt-Sysrq-b" works)
- Other kernel error messages

Write accesses would probably lead to severe damage of the cards' data structures.

This is an example of an error message
a few seconds after inserting a 2GB SD card
and immediately before a complete system freeze:

=================================================
Message from syslogd@christoph11 at Sat May 16 22:49:27 2009 ...
christoph11 kernel: [14478.647829] ------------[ cut here ]------------

Message from syslogd@christoph11 at Sat May 16 22:49:27 2009 ...
christoph11 kernel: [14478.647838] invalid opcode: 0000 [1] SMP

Message from syslogd@christoph11 at Sat May 16 22:49:27 2009 ...
christoph11 kernel: [14478.648103] Code: e5 75 1c 49 8b 6c 24 20 49 8d 44 24 20 41 c7 44 24 60 01 00 00 00 48 39 c5 0f 84 a4 00 00 00 8b 45 20 41 3b 87 18 01 00 00 72 24 <0f> 0b eb fe 41 8b 5d 00 8b 54 24 04 48 89 ee 4c 89 ff e8 74 f0
=================================================

Due to my lack of an idea what exactly is going on,
I did not yet report this to upstream with the
exception of using the "Oops message reporting tool"
a few times (whenever it was automatically triggered).

Further below you find the standard information added by "reportbug".

Thanks for your fine operating system, best regards, Christoph

=================================================
-- Package-specific info:
** Version:
Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 13 15:37:46 UTC 2009

** Command line:
root=/dev/sdb1 ro 

** Tainted: P (1)

** Kernel log:
[   10.508834] EXT3-fs: recovery complete.
[   10.524840] EXT3-fs: mounted filesystem with journal data mode.
[   13.075585] udevd version 125 started
[   14.248800] ACPI: AC Adapter [ACAD] (on-line)
[   14.264797] input: Power Button (FF) as /class/input/input3
[   14.276793] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[   14.276793] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[   14.320796] ACPI: Power Button (FF) [PWRF]
[   14.320796] input: Lid Switch as /class/input/input4
[   14.352796] ACPI: Lid Switch [LID]
[   14.632801] ACPI: Battery Slot [BAT0] (battery present)
[   14.632801] input: Power Button (CM) as /class/input/input5
[   14.688793] ACPI: Power Button (CM) [PWRB]
[   14.688793] input: Sleep Button (CM) as /class/input/input6
[   14.744791] ACPI: Sleep Button (CM) [SLPB]
[   14.744792] ACPI: WMI: Mapper loaded
[   14.772793] Bluetooth: Core ver 2.11
[   14.772793] NET: Registered protocol family 31
[   14.772793] Bluetooth: HCI device and connection manager initialized
[   14.772793] Bluetooth: HCI socket layer initialized
[   14.796788] Bluetooth: HCI USB driver ver 2.9
[   14.796788] usbcore: registered new interface driver hci_usb
[   14.892788] ACPI: device:23 is registered as cooling_device2
[   14.892788] input: Video Bus as /class/input/input7
[   14.952793] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[   14.956792] ACPI: device:29 is registered as cooling_device3
[   14.956792] input: Video Bus as /class/input/input8
[   14.988789] Linux video capture interface: v2.00
[   15.012792] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101)
[   15.016789] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.016789] input: HP Webcam as /class/input/input9
[   15.040785] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   15.056790] usbcore: registered new interface driver uvcvideo
[   15.056790] USB Video Class driver (v0.1.0)
[   15.436927] input: PC Speaker as /class/input/input10
[   15.492929] ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver
[   15.496932] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[   15.496932] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[   15.496932] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 16 (level, low) -> IRQ 16
[   15.496932] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   15.512926] ndiswrapper: using IRQ 16
[   15.750542] wlan0: ethernet device 00:1a:73:bf:fc:46 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf
[   15.750542] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   15.776931] usbcore: registered new interface driver ndiswrapper
[   15.976927] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   15.976927] ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
[   15.976927] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   16.488917] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   16.568916] input: SynPS/2 Synaptics TouchPad as /class/input/input11
[   18.472924] Adding 3863624k swap on /dev/sdb2.  Priority:-1 extents:1 across:3863624k
[   18.791659] EXT3 FS on sdb1, internal journal
[   19.579652] loop: module loaded
[   19.995648] fuse init (API version 7.9)
[   23.051617] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.087620] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   26.171586] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[   26.172404] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x13
[   26.172408] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x14
[   26.172411] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x15
[   26.172414] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
[   28.124662] NET: Registered protocol family 10
[   28.124662] lo: Disabled Privacy Extensions
[   30.024654] Clocksource tsc unstable (delta = -280812151 ns)
[   35.848727] lp: driver loaded but no devices found
[   35.912728] ppdev: user-space parallel port driver
[   40.789650] NET: Registered protocol family 23
[   42.776712] RPC: Registered udp transport module.
[   42.776712] RPC: Registered tcp transport module.
[   42.824713] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   42.908954] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   42.917703] NFSD: starting 90-second grace period
[   46.662058] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
[   51.093634] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   54.321611] eth0: no link during initialization.
[   54.325627] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   56.726012] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   58.369996] Bluetooth: L2CAP ver 2.9
[   58.369996] Bluetooth: L2CAP socket layer initialized
[   58.489994] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   58.521994] Bluetooth: RFCOMM socket layer initialized
[   58.521994] Bluetooth: RFCOMM TTY layer initialized
[   58.521994] Bluetooth: RFCOMM ver 1.8
[   64.400748] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[   64.400764] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
[   64.400775] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   64.400973] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.09  Wed Jun  4 23:40:50 PDT 2008
[   69.504916] wlan0: no IPv6 routers present
[10717.726082] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
[10740.431340] CPU0 attaching NULL sched-domain.
[10740.431340] CPU1 attaching NULL sched-domain.
[10740.451330] CPU0 attaching sched-domain:
[10740.451330]  domain 0: span 0-1
[10740.451330]   groups: 0 1
[10740.451330]   domain 1: span 0-1
[10740.451330]    groups: 0-1
[10740.451330] CPU1 attaching sched-domain:
[10740.451330]  domain 0: span 0-1
[10740.451330]   groups: 1 0
[10740.451330]   domain 1: span 0-1
[10740.451330]    groups: 0-1

** Loaded modules:
Module                  Size  Used by
nvidia               8105072  26 
binfmt_misc            13580  1 
rfcomm                 38176  10 
l2cap                  23936  9 rfcomm
nfsd                  248360  13 
lockd                  68944  1 nfsd
nfs_acl                 7552  1 nfsd
auth_rpcgss            47520  1 nfsd
sunrpc                197864  11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs                8704  1 nfsd
irtty_sir               9728  0 
sir_dev                16904  1 irtty_sir
irda                  117732  1 sir_dev
crc_ccitt               6528  1 irda
ppdev                  11656  0 
lp                     14724  0 
parport                41776  2 ppdev,lp
ipv6                  288328  38 
powernow_k8            17156  1 
cpufreq_stats           9120  0 
cpufreq_ondemand       11792  1 
freq_table              9344  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace       8452  0 
cpufreq_powersave       6400  0 
cpufreq_conservative    11784  0 
iptable_filter          7424  1 
iptable_nat             9872  0 
nf_nat                 23192  1 iptable_nat
nf_conntrack_ipv4      19352  3 iptable_nat,nf_nat
nf_conntrack           71440  3 iptable_nat,nf_nat,nf_conntrack_ipv4
ip_tables              21520  2 iptable_filter,iptable_nat
x_tables               25224  2 iptable_nat,ip_tables
fuse                   53184  5 
loop                   19468  0 
joydev                 14848  0 
snd_hda_intel         436440  2 
snd_pcm_oss            41760  0 
snd_mixer_oss          18816  1 snd_pcm_oss
snd_pcm                81672  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy           7428  0 
snd_seq_oss            33280  0 
snd_seq_midi           11072  0 
snd_rawmidi            26784  1 snd_seq_midi
snd_seq_midi_event     11904  2 snd_seq_oss,snd_seq_midi
snd_seq                54304  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
psmouse                42268  0 
snd_timer              25744  2 snd_pcm,snd_seq
pcspkr                  7040  0 
serio_raw               9860  0 
k8temp                  9216  0 
snd_seq_device         11668  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63688  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ndiswrapper           216064  0 
uvcvideo               55560  0 
compat_ioctl32         12288  1 uvcvideo
videodev               35840  2 uvcvideo,compat_ioctl32
v4l1_compat            17284  2 uvcvideo,videodev
soundcore              12064  1 snd
snd_page_alloc         13072  2 snd_hda_intel,snd_pcm
hci_usb                18460  3 
bluetooth              57124  9 rfcomm,l2cap,hci_usb
video                  24084  9 
output                  7808  1 video
wmi                    11712  0 
battery                16776  0 
i2c_nforce2            10752  0 
button                 11680  0 
ac                      9352  0 
i2c_core               27936  2 nvidia,i2c_nforce2
evdev                  14208  22 
ext3                  124944  1 
jbd                    51240  1 ext3
mbcache                12804  1 ext3
sd_mod                 29376  6 
usbhid                 45920  0 
hid                    41664  1 usbhid
ff_memless              9224  1 usbhid
ide_cd_mod             36360  0 
cdrom                  37928  1 ide_cd_mod
ahci                   33036  6 
ata_generic            10116  0 
libata                165600  2 ahci,ata_generic
scsi_mod              160760  2 sd_mod,libata
dock                   14112  1 libata
amd74xx                13448  0 [permanent]
ohci1394               32692  0 
sdhci                  19460  0 
ieee1394               93816  1 ohci1394
ricoh_mmc               8448  0 
forcedeth              54032  0 
ehci_hcd               35980  0 
mmc_core               52448  1 sdhci
ide_pci_generic         9220  0 [permanent]
ide_core              128284  3 ide_cd_mod,amd74xx,ide_pci_generic
ohci_hcd               25092  0 
thermal                22816  0 
processor              42304  4 powernow_k8,thermal
fan                     9352  0 
thermal_sys            17728  4 video,thermal,processor,fan

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0444] (rev a3)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 800MHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0442] (rev a3)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 1d00 [size=256]

00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 3080 [size=64]
	Region 4: I/O ports at 3040 [size=64]
	Region 5: I/O ports at 3000 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2

00:01.3 Co-processor [0b40]: nVidia Corporation MCP65 SMU [10de:0447] (rev a1)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0454] (rev a3) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0455] (rev a3) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at b0007000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:06.0 Ethernet controller [0200]: nVidia Corporation MCP65 Ethernet [10de:0450] (rev a3)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 30e0 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:07.0 Audio device [0403]: nVidia Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
	Memory behind bridge: b0100000-b01fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
	Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000

00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at 30c0 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: AMD_IDE
	Kernel modules: ide-pci-generic, amd74xx, ata_generic

00:0a.0 IDE interface [0101]: nVidia Corporation MCP65 SATA Controller [10de:045d] (rev a3) (prog-if 85 [Master SecO PriO])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 30f8 [size=8]
	Region 1: I/O ports at 30ec [size=4]
	Region 2: I/O ports at 30f0 [size=8]
	Region 3: I/O ports at 30e8 [size=4]
	Region 4: I/O ports at 30d0 [size=16]
	Region 5: Memory at b0004000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ahci
	Kernel modules: ide-pci-generic, ata_generic, ahci

00:0b.0 PCI bridge [0604]: nVidia Corporation Device [10de:045b] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0300c  Data: 4149
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:0c.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:045a] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: b0200000-b02fffff
	Prefetchable memory behind bridge: 00000000b6000000-00000000b60fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0300c  Data: 4151
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: b1000000-b3ffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0300c  Data: 4159
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0459] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: b4000000-b5ffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0300c  Data: 4161
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k8temp
	Kernel modules: k8temp

03:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
	Subsystem: Hewlett-Packard Company BCM4321 802.11a/b/g/n Wireless LAN Controller [103c:1367]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b0200000 (64-bit, non-prefetchable) [size=16K]
	Region 2: Memory at b6000000 (64-bit, prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [58] Vendor Specific Information <?>
	Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn+ AttnInd+ PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
			ClockPM+ Suprise+ LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [13c] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 1a-00-bf-ff-ff-73-46-fc
	Capabilities: [16c] Power Budgeting <?>
	Kernel driver in use: ndiswrapper
	Kernel modules: ssb

05:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400M GS [10de:0427] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at b2000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 4000 [size=128]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information <?>
	Kernel driver in use: nvidia
	Kernel modules: nvidiafb, nvidia

07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME+
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 7
	Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: sdhci
	Kernel modules: sdhci

07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: ricoh-mmc
	Kernel modules: ricoh_mmc

07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:30cf]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
	!!! Unknown header type 7f



-- System Information:
Debian Release: 5.0.1
  APT prefers proposed-updates
  APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

linux-image-2.6.26-2-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-2-amd64 suggests:
ii  grub                     0.97-47lenny2   GRand Unified Bootloader (Legacy v
ii  linux-doc-2.6.26         2.6.26-15lenny2 Linux kernel specific documentatio

-- debconf information:
  linux-image-2.6.26-2-amd64/postinst/depmod-error-2.6.26-2-amd64: false
  linux-image-2.6.26-2-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-2-amd64/preinst/abort-install-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/postinst/old-initrd-link-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/postinst/depmod-error-initrd-2.6.26-2-amd64: false
  linux-image-2.6.26-2-amd64/postinst/bootloader-test-error-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/preinst/overwriting-modules-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.26-2-amd64/prerm/would-invalidate-boot-loader-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/postinst/old-system-map-link-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/preinst/abort-overwrite-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/preinst/elilo-initrd-2.6.26-2-amd64: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-2-amd64/postinst/bootloader-error-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/preinst/lilo-initrd-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/postinst/old-dir-initrd-link-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/postinst/create-kimage-link-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/preinst/initrd-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/preinst/failed-to-move-modules-2.6.26-2-amd64:
  linux-image-2.6.26-2-amd64/preinst/bootloader-initrd-2.6.26-2-amd64: true
  linux-image-2.6.26-2-amd64/prerm/removing-running-kernel-2.6.26-2-amd64: true
=================================================



--- End Message ---
--- Begin Message ---
Version: 2.6.30-1

On Sun, Oct 11, 2009 at 08:55:45PM +0100, Ben Hutchings wrote:
> On Thu, 2009-09-10 at 18:21 +0200, Christoph Franzen wrote:
> [...]
> > 1) Installed 2.6.30 from the backports, but without the Nvidia
> > proprietary module, and rebooted into this configuration without
> > changing "xorg.conf" to the "nv" driver, so X did not start; inserted
> > the same 2GB SD card which I used before, mounted it by hand
> > ("/dev/mmcblk0p1" on "/mnt"), tried "ls", copied all files from the
> > card to a temporary location on the hard disk, copied about 256 MiB of
> > files to the SD card, umounted the card again.
> > => everything worked fine, no problems at all.
> > 
> > 2) Changed "xorg.conf" to rule out the proprietary driver, rebooted
> > into 2.6.26 with the SD card still inserted.
> > => The kernel crashed while booting as soon as the card was accessed.
> [...]
> > So the bug might hide in any of the modules above (sdhc*, mmc_core).
> > 
> > I think it would be best to port the fix from 2.6.30 to Lenny, because
> > the average user could suffer from severe data loss by simply inserting
> > a card into the slot.
> 
> Right, but first we need to identify the fix.
> 
> > I'm no kernel hacker, so I don't know where exactly to search for the
> > bug, but I will test anything for you if you wish.
> 
> Thanks.  Can you first please send a complete 'oops' message from
> 2.6.26?

No further feedback wrt 2.6.26, marking 2.6.30 as fixed for unstable.

Cheers,
        Moritz


--- End Message ---

Reply to: