--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-686-bigmem: kernel fails to boot, stuck in "waiting for root file system"
- From: Toni Mueller <support@oeko.net>
- Date: Fri, 12 Jun 2009 12:14:13 +0200
- Message-id: <20090612101413.24076.63779.reportbug@birch.oeko.net>
Package: linux-image-2.6.26-2-686-bigmem
Version: 2.6.26-16
Severity: important
Hello,
I've just upgraded a Lenny machine (not this one where I'm writing the
bug report on) from linux-image-2.6.26-2-686-bigmem_2.6.26-15lenny3 to
linux-image-2.6.26-2-686-bigmem_2.6.26-16
via "aptitude update && aptitude safe-upgrade" and found that the
machine no longer booted because it somehow could not find its disks,
therefore concluding that it could not find its root file system.
The machine worked w/o problems before, with the
linux-image-2.6.26-2-686-bigmem_2.6.26-15lenny3 kernel. Below you find
the dmesg for this kernel.
Kind regards,
--Toni++
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'proposed-updates'), (450, 'testing'), (250, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686-bigmem (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 16:09:02 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099800 (usable)
[ 0.000000] BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff76000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff76000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f6f00] 000f6f00
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Entering add_active_range(0, 0, 262000) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262000
[ 0.000000] On node 0 totalpages: 262000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32369 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000F6E90, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FF7103E, 003C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FF75DAD, 0074 (r1 INTEL LINDHRST 6040000 PTL 3)
[ 0.000000] ACPI: DSDT 3FF7107A, 4D33 (r1 Intel LINDHRST 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FF76FC0, 0040
[ 0.000000] ACPI: MCFG 3FF75E21, 0040 (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SPCR 3FF75E61, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: APIC 3FF75EB1, 0080 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FF75F31, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: ASF! 3FF75F59, 00A7 (r32 MBI 6040000 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 42184 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259953
[ 0.000000] Kernel command line: root=/dev/mapper/vg1-root ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec81000)
[ 0.000000] mapped IOAPIC to ffff8000 (fec81400)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3200.346 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1027888k/1048000k available (1834k kernel code, 19352k reserved, 788k data, 256k init, 130496k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffe13000 - 0xfffff000 (1968 kB)
[ 0.004000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc0397000 - 0xc03d7000 ( 256 kB)
[ 0.004000] .data : 0xc02caabb - 0xc038fac0 ( 788 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02caabb (1834 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084008] Calibrating delay using timer specific routine.. 6406.50 BogoMIPS (lpj=12813004)
[ 0.084165] Security Framework initialized
[ 0.084226] SELinux: Disabled at boot.
[ 0.084284] Capability LSM initialized
[ 0.084355] Mount-cache hash table entries: 512
[ 0.084577] Initializing cgroup subsys ns
[ 0.084636] Initializing cgroup subsys cpuacct
[ 0.084692] Initializing cgroup subsys devices
[ 0.084774] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.084871] CPU: L2 cache: 1024K
[ 0.084926] CPU: Physical Processor ID: 0
[ 0.084983] Intel machine check architecture supported.
[ 0.085045] Intel machine check reporting enabled on CPU#0.
[ 0.085104] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.085165] CPU0: Thermal monitoring enabled
[ 0.085222] using mwait in idle threads.
[ 0.085290] Checking 'hlt' instruction... OK.
[ 0.101799] ACPI: Core revision 20080321
[ 0.112315] ENABLING IO-APIC IRQs
[ 0.112544] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152409] CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 6400.64 BogoMIPS (lpj=12801293)
[ 0.164010] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.164010] CPU: L2 cache: 1024K
[ 0.164010] CPU: Physical Processor ID: 0
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.164010] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.164010] CPU1: Thermal monitoring enabled
[ 0.243980] CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Brought up 2 CPUs
[ 0.248015] Total of 2 processors activated (12807.14 BogoMIPS).
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 0 1
[ 0.248015] domain 1: span 0-1
[ 0.248015] groups: 0-1
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 1 0
[ 0.248015] domain 1: span 0-1
[ 0.248015] groups: 0-1
[ 0.248015] net_namespace: 660 bytes
[ 0.248015] Booting paravirtualized kernel on bare hardware
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 5
[ 0.248015] PCI: MCFG area at e0000000 reserved in E820
[ 0.248015] PCI: Using MMCONFIG for extended config space
[ 0.248015] PCI: Using configuration type 1 for base access
[ 0.248015] Setting up standard PCI resources
[ 0.257664] ACPI: EC: Look up EC in DSDT
[ 0.260293] ACPI: Interpreter enabled
[ 0.260352] ACPI: (supports S0 S4 S5)
[ 0.261039] ACPI: Using IOAPIC for interrupt routing
[ 0.269040] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.269040] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.269040] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.269040] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.269040] pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.269040] pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.269792] PCI: Transparent bridge - 0000:00:1e.0
[ 0.269792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.269792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHA._PRT]
[ 0.269792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHB._PRT]
[ 0.269792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.277269] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.277269] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.277374] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.277950] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.278525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.279188] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.279815] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.281267] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
[ 0.281267] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.281267] pnp: PnP ACPI init
[ 0.281280] ACPI: bus type pnp registered
[ 0.288298] pnp: PnP ACPI: found 13 devices
[ 0.288355] ACPI: ACPI bus type pnp unregistered
[ 0.288413] PnPBIOS: Disabled by ACPI PNP
[ 0.289268] PCI: Using ACPI for IRQ routing
[ 0.292364] hpet clockevent registered
[ 0.292371] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.292588] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.293268] ACPI: RTC can wake from S4
[ 0.295800] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.295863] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.295928] system 00:01: ioport range 0x1180-0x118c has been reserved
[ 0.295988] system 00:01: ioport range 0x118d-0x118d has been reserved
[ 0.296049] system 00:01: ioport range 0x118f-0x118f has been reserved
[ 0.296109] system 00:01: ioport range 0x1190-0x11bf has been reserved
[ 0.296169] system 00:01: ioport range 0x800-0x82f has been reserved
[ 0.296228] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.296289] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.296362] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.296435] system 00:01: iomem range 0xfec81000-0xfec81fff has been reserved
[ 0.296497] system 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved
[ 0.328421] PCI: Bridge: 0000:00:02.0
[ 0.328421] IO window: disabled.
[ 0.328421] MEM window: 0xd0100000-0xd01fffff
[ 0.328421] PREFETCH window: disabled.
[ 0.328431] PCI: Bridge: 0000:02:00.0
[ 0.328486] IO window: disabled.
[ 0.328544] MEM window: 0xd0300000-0xd03fffff
[ 0.328602] PREFETCH window: 0x00000000d4000000-0x00000000d7ffffff
[ 0.328665] PCI: Bridge: 0000:02:00.2
[ 0.328720] IO window: disabled.
[ 0.328777] MEM window: disabled.
[ 0.328834] PREFETCH window: disabled.
[ 0.328893] PCI: Bridge: 0000:00:03.0
[ 0.328947] IO window: disabled.
[ 0.329005] MEM window: 0xd0200000-0xd03fffff
[ 0.329063] PREFETCH window: 0x00000000d4000000-0x00000000d7ffffff
[ 0.329125] PCI: Bridge: 0000:00:04.0
[ 0.329180] IO window: disabled.
[ 0.329237] MEM window: disabled.
[ 0.329293] PREFETCH window: disabled.
[ 0.329353] PCI: Bridge: 0000:00:1e.0
[ 0.329410] IO window: 2000-2fff
[ 0.329468] MEM window: 0xd0400000-0xd04fffff
[ 0.329526] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
[ 0.329604] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.331972] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.331972] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.331972] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.331972] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 0.331972] PCI: Setting latency timer of device 0000:02:00.2 to 64
[ 0.331972] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.331972] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.331972] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.331972] NET: Registered protocol family 2
[ 0.344018] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.344409] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.344971] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.345360] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.345421] TCP reno registered
[ 0.348046] NET: Registered protocol family 1
[ 0.348234] checking if image is initramfs... it is
[ 0.790535] Switched to high resolution mode on CPU 1
[ 0.792323] Switched to high resolution mode on CPU 0
[ 0.877902] Freeing initrd memory: 6851k freed
[ 0.878258] Simple Boot Flag at 0x39 set to 0x1
[ 0.878258] audit: initializing netlink socket (disabled)
[ 0.878258] type=2000 audit(1244023582.872:1): initialized
[ 0.878258] highmem bounce pool size: 64 pages
[ 0.878258] Total HugeTLB memory allocated, 0
[ 0.878259] VFS: Disk quotas dquot_6.5.1
[ 0.878259] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.878259] msgmni has been set to 1766
[ 0.878259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.878259] io scheduler noop registered
[ 0.878259] io scheduler anticipatory registered
[ 0.878259] io scheduler deadline registered
[ 0.878259] io scheduler cfq registered (default)
[ 0.878696] pci 0000:06:04.0: Boot video device
[ 0.878696] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.878696] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.878696] Allocate Port Service[0000:00:02.0:pcie01]
[ 0.878696] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.878696] Allocate Port Service[0000:00:03.0:pcie00]
[ 0.878696] Allocate Port Service[0000:00:03.0:pcie01]
[ 0.878696] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.878696] Allocate Port Service[0000:00:04.0:pcie00]
[ 0.878696] Allocate Port Service[0000:00:04.0:pcie01]
[ 0.879486] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support
[ 0.880286] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support
[ 0.881085] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
[ 0.882397] isapnp: Scanning for PnP cards...
[ 1.233007] isapnp: No Plug & Play device found
[ 1.238240] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.238240] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.238240] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.242278] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.242278] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.242278] brd: module loaded
[ 1.242278] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.246864] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.246864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.250202] mice: PS/2 mouse device common for all mice
[ 1.250202] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.250202] rtc0: alarms up to one month, y3k
[ 1.250202] cpuidle: using governor ladder
[ 1.250202] cpuidle: using governor menu
[ 1.250202] No iBFT detected.
[ 1.250202] TCP cubic registered
[ 1.250202] NET: Registered protocol family 17
[ 1.250202] Using IPI No-Shortcut mode
[ 1.250202] registered taskstats version 1
[ 1.250202] rtc_cmos 00:04: setting system clock to 2009-06-03 10:06:23 UTC (1244023583)
[ 1.250202] Freeing unused kernel memory: 256k freed
[ 1.271500] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.340777] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.340777] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.342335] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.342335] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.811306] usbcore: registered new interface driver usbfs
[ 1.811306] usbcore: registered new interface driver hub
[ 1.811306] usbcore: registered new device driver usb
[ 1.811306] tg3.c:v3.92.1 (June 9, 2008)
[ 1.811409] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.811536] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 1.831306] SCSI subsystem initialized
[ 1.836934] USB Universal Host Controller Interface driver v3.0
[ 1.839339] eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:0d:60:16:a6:f3
[ 1.839339] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 1.839339] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.839339] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.839339] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.839339] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.839339] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.839339] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
[ 1.839339] usb usb1: configuration #1 chosen from 1 choice
[ 1.839339] hub 1-0:1.0: USB hub found
[ 1.839339] hub 1-0:1.0: 2 ports detected
[ 1.936997] Uniform Multi-Platform E-IDE driver
[ 1.936997] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.958058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.958058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.958058] usb usb1: Product: UHCI Host Controller
[ 1.958058] usb usb1: Manufacturer: Linux 2.6.26-2-686-bigmem uhci_hcd
[ 1.958058] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.958058] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.958058] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.958058] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.958058] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.958058] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
[ 1.960210] usb usb2: configuration #1 chosen from 1 choice
[ 1.960327] hub 2-0:1.0: USB hub found
[ 1.960396] hub 2-0:1.0: 2 ports detected
[ 1.972539] Floppy drive(s): fd0 is 1.44M
[ 1.988538] FDC 0 is a National Semiconductor PC87306
[ 2.068244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.068244] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.068244] usb usb2: Product: UHCI Host Controller
[ 2.068244] usb usb2: Manufacturer: Linux 2.6.26-2-686-bigmem uhci_hcd
[ 2.068244] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.068244] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.068244] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.068244] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.068244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.068244] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440
[ 2.068244] usb usb3: configuration #1 chosen from 1 choice
[ 2.068244] hub 3-0:1.0: USB hub found
[ 2.068244] hub 3-0:1.0: 2 ports detected
[ 2.172243] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.172243] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.172243] usb usb3: Product: UHCI Host Controller
[ 2.172243] usb usb3: Manufacturer: Linux 2.6.26-2-686-bigmem uhci_hcd
[ 2.172243] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.172243] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.172243] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.172243] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.172243] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.172243] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460
[ 2.172243] usb usb4: configuration #1 chosen from 1 choice
[ 2.172243] hub 4-0:1.0: USB hub found
[ 2.172243] hub 4-0:1.0: 2 ports detected
[ 2.276956] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.276956] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.276956] usb usb4: Product: UHCI Host Controller
[ 2.276956] usb usb4: Manufacturer: Linux 2.6.26-2-686-bigmem uhci_hcd
[ 2.276956] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.276956] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.276956] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.276956] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.276956] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.324966] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.324966] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 2.324966] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000
[ 2.360955] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.360955] usb usb5: configuration #1 chosen from 1 choice
[ 2.360955] hub 5-0:1.0: USB hub found
[ 2.361010] hub 5-0:1.0: 8 ports detected
[ 2.464952] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.464952] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.464952] usb usb5: Product: EHCI Host Controller
[ 2.464952] usb usb5: Manufacturer: Linux 2.6.26-2-686-bigmem ehci_hcd
[ 2.464952] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.464952] ICH5: IDE controller (0x8086:0x24db rev 0x02) at PCI slot 0000:00:1f.1
[ 2.464952] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.464952] ICH5: not 100% native mode: will probe irqs later
[ 2.464952] ide0: BM-DMA at 0x14a0-0x14a7
[ 2.464952] ide1: BM-DMA at 0x14a8-0x14af
[ 2.464952] Probing IDE interface ide0...
[ 3.250907] hda: BTC CD-ROM F523E, ATAPI CD/DVD-ROM drive
[ 3.586803] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.586887] hda: UDMA/33 mode selected
[ 3.587025] Probing IDE interface ide1...
[ 4.684965] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.684965] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.688904] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 28 (level, low) -> IRQ 28
[ 30.788969] scsi0 : IBM PCI ServeRAID 7.12.05 Build 761 <ServeRAID 6i>
[ 30.788969] scsi 0:0:0:0: Direct-Access IBM SERVERAID 1.00 PQ: 0 ANSI: 2
[ 30.788969] scsi 0:0:15:0: Processor IBM SERVERAID 1.00 PQ: 0 ANSI: 2
[ 30.792973] No dock devices found.
[ 30.792973] scsi 0:2:8:0: Processor IBM 02R0980a S320 1 1 PQ: 0 ANSI: 2
[ 30.809354] libata version 3.00 loaded.
[ 30.836971] hda: ATAPI 48X CD-ROM drive, 128kB Cache
[ 30.836971] Uniform CD-ROM driver Revision: 3.20
[ 30.880972] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.880972] scsi 0:0:15:0: Attached scsi generic sg1 type 3
[ 30.880972] scsi 0:2:8:0: Attached scsi generic sg2 type 3
[ 30.889656] Driver 'sd' needs updating - please use bus_type methods
[ 30.889656] sd 0:0:0:0: [sda] 286744576 512-byte hardware sectors (146813 MB)
[ 30.889656] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 30.889656] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 30.889656] sd 0:0:0:0: [sda] 286744576 512-byte hardware sectors (146813 MB)
[ 30.889656] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 30.889656] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 30.889656] sda: sda1 sda2
[ 30.903249] sd 0:0:0:0: [sda] Attached SCSI disk
[ 31.177882] device-mapper: uevent: version 1.0.3
[ 31.181850] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 31.388715] PM: Starting manual resume from disk
[ 31.432707] kjournald starting. Commit interval 5 seconds
[ 31.432707] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.585048] udevd version 125 started
[ 33.101372] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.107037] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.215157] EDAC MC: Ver: 2.1.0 May 28 2009
[ 33.247252] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
[ 33.374220] input: Power Button (FF) as /class/input/input1
[ 33.430201] ACPI: Power Button (FF) [PWRF]
[ 33.430220] input: Power Button (CM) as /class/input/input2
[ 33.478301] ACPI: Power Button (CM) [PWRB]
[ 34.162184] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 34.211988] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 34.211988] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[ 34.211988] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 34.340316] intel_rng: FWH not detected
[ 34.429270] input: PC Speaker as /class/input/input3
[ 34.820745] parport_pc 00:08: reported by Plug and Play ACPI
[ 34.820912] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 35.563473] EXT3 FS on dm-0, internal journal
[ 35.898764] loop: module loaded
[ 38.164797] kjournald starting. Commit interval 5 seconds
[ 38.164797] EXT3 FS on sda1, internal journal
[ 38.164797] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.204799] kjournald starting. Commit interval 5 seconds
[ 38.204799] EXT3 FS on dm-9, internal journal
[ 38.204799] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.236799] kjournald starting. Commit interval 5 seconds
[ 38.204799] EXT3 FS on dm-7, internal journal
[ 38.204799] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.264799] kjournald starting. Commit interval 5 seconds
[ 38.204799] EXT3 FS on dm-8, internal journal
[ 38.204799] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.286532] kjournald starting. Commit interval 5 seconds
[ 38.312788] EXT3 FS on dm-2, internal journal
[ 38.312788] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.312788] kjournald starting. Commit interval 5 seconds
[ 38.312788] EXT3 FS on dm-3, internal journal
[ 38.312788] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.336786] kjournald starting. Commit interval 5 seconds
[ 38.312788] EXT3 FS on dm-4, internal journal
[ 38.312788] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.336786] kjournald starting. Commit interval 5 seconds
[ 38.312788] EXT3 FS on dm-5, internal journal
[ 38.312788] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.376786] kjournald starting. Commit interval 5 seconds
[ 38.312788] EXT3 FS on dm-6, internal journal
[ 38.312788] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.542171] Adding 4194296k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:4194296k
[ 39.626377] NET: Registered protocol family 10
[ 39.627211] lo: Disabled Privacy Extensions
[ 39.630371] ADDRCONF(NETDEV_UP): eth0: link is not ready
--- End Message ---