Bug#563036: fails to boot on thecus n2100
* Joey Hess <joeyh@debian.org> [2009-12-30 00:23]:
> Package: linux-2.6
> Version: 2.6.32-3
>
> Without a serial console, all I can tell is that the root disk is
> accessed briefly and then the boot must fail as there is no further disk
> activity.
I just booted that kernel on my N2100 and it works fine. Can you hook
up a serial coonsole to yours to see what's going on?
ATAG_MEM: Overwrite ram_end with real_region_top=0x08000000, memsize=128 M
ATAG_MEM=134217728@0xa0000000, MACH_TYPE=1101
Using base address 0x00200000 and length 0x00160000
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-iop32x (Debian 2.6.32-3) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Sat Dec 26 20:22:15 UTC 2009
[ 0.000000] CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=0000397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Thecus N2100
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=128M@0xa0000000
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 83100KB available (3028K code, 438K data, 112K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:32
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
[ 0.230000] Security Framework initialized
[ 0.230000] SELinux: Disabled at boot.
[ 0.230000] Mount-cache hash table entries: 512
[ 0.230000] Initializing cgroup subsys ns
[ 0.230000] Initializing cgroup subsys cpuacct
[ 0.230000] Initializing cgroup subsys devices
[ 0.230000] Initializing cgroup subsys freezer
[ 0.230000] Initializing cgroup subsys net_cls
[ 0.230000] CPU: Testing write buffer coherency: ok
[ 0.230000] regulator: core version 0.5
[ 0.230000] NET: Registered protocol family 16
[ 0.230000] pci 0000:00:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.230000] pci 0000:00:01.0: PME# disabled
[ 0.230000] pci 0000:00:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.230000] pci 0000:00:02.0: PME# disabled
[ 0.230000] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.230000] pci 0000:00:04.0: PME# disabled
[ 0.230000] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.230000] pci 0000:00:04.1: PME# disabled
[ 0.240000] pci 0000:00:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.240000] pci 0000:00:04.2: PME# disabled
[ 0.240000] PCI: bus0: Fast back to back transfers disabled
[ 0.240000] bio: create slab <bio-0> at 0
[ 0.240000] vgaarb: loaded
[ 0.250000] NET: Registered protocol family 2
[ 0.250000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.250000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.260000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.260000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.260000] TCP reno registered
[ 0.260000] NET: Registered protocol family 1
[ 0.260000] Unpacking initramfs...
[ 3.060000] Freeing initrd memory: 43008K
[ 3.060000] NetWinder Floating Point Emulator V0.97 (double precision)
[ 3.060000] audit: initializing netlink socket (disabled)
[ 3.060000] type=2000 audit(3.060:1): initialized
[ 3.070000] VFS: Disk quotas dquot_6.5.2
[ 3.070000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.070000] msgmni has been set to 246
[ 3.080000] alg: No test for stdrng (krng)
[ 3.080000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.080000] io scheduler noop registered
[ 3.080000] io scheduler anticipatory registered
[ 3.080000] io scheduler deadline registered
[ 3.080000] io scheduler cfq registered (default)
[ 3.090000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 3.090000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A
[ 3.440000] console [ttyS0] enabled
[ 3.440000] physmap platform flash device: 01000000 at f0000000
[ 3.450000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[ 3.450000] Intel/Sharp Extended Query Table at 0x0031
[ 3.470000] Intel/Sharp Extended Query Table at 0x0031
[ 3.470000] Using buffer write method
[ 3.480000] cfi_cmdset_0001: Erase suspend on write enabled
[ 3.480000] Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000
[ 3.800000] 6 RedBoot partitions found on MTD device physmap-flash.0
[ 3.810000] Creating 6 MTD partitions on "physmap-flash.0":
[ 3.810000] 0x000000000000-0x000000040000 : "RedBoot"
[ 3.830000] 0x000000040000-0x000000d40000 : "ramdisk"
[ 3.830000] 0x000000d40000-0x000000ea0000 : "kernel"
[ 3.840000] 0x000000ea0000-0x000000fc0000 : "user"
[ 3.840000] 0x000000fc0000-0x000000fc1000 : "RedBoot config"
[ 3.840000] mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
[ 3.860000] 0x000000fe0000-0x000001000000 : "FIS directory"
[ 3.870000] mice: PS/2 mouse device common for all mice
[ 3.870000] i2c /dev entries driver
[ 3.880000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
[ 3.890000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 3.890000] pca9532 0-0060: setting platform data
[ 3.900000] Registered led device: n2100:red:satafail0
[ 3.900000] Registered led device: n2100:red:satafail1
[ 3.920000] Registered led device: n2100:blue:usb
[ 3.920000] Registered led device: n2100:red:usb
[ 3.930000] Registered led device: n2100:orange:system
[ 3.930000] Registered led device: n2100:red:system
[ 3.930000] input: N2100 beeper as /devices/virtual/input/input0
[ 3.970000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr )
[ 3.990000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr )
[ 3.990000] TCP cubic registered
[ 4.000000] NET: Registered protocol family 17
[ 4.000000] XScale DSP coprocessor detected.
[ 4.010000] registered taskstats version 1
[ 4.010000] rtc-rs5c372 0-0032: setting system clock to 2010-01-03 02:00:44 UTC (1262484044)
[ 4.030000] Freeing init memory: 112K
Loading, please wait...
Begin: Loading essential drivers ... [ 4.680000] SCSI subsystem initialized
[ 4.970000] sata_sil 0000:00:03.0: Applying R_ERR on DMA activate FIS errata fix
[ 4.990000] scsi0 : sata_sil
[ 4.990000] scsi1 : sata_sil
[ 5.000000] ata1: SATA max UDMA/100 mmio m512@0x800a0000 tf 0x800a0080 irq 29
[ 5.000000] ata2: SATA max UDMA/100 mmio m512@0x800a0000 tf 0x800a00c0 irq 29
[ 5.360000] ata1: SATA link down (SStatus 0 SControl 310)
[ 5.710000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.730000] ata2.00: ATA-7: Maxtor 6L080M0, BACE1GG0, max UDMA/100
[ 5.730000] ata2.00: 156301488 sectors, multi 0: LBA48
[ 5.790000] ata2.00: configured for UDMA/100
[ 5.790000] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L080M0 BACE PQ: 0 ANSI: 5
done.
Begin: Running /scripts/init-premount ... [ 6.750000] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.760000] sd 1:0:0:0: [sda] Write Protect is off
[ 6.780000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.790000] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 6.850000] sd 1:0:0:0: [sda] Attached SCSI disk
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 7.810000] kjournald starting. Commit interval 5 seconds
[ 7.810000] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 10.310000] udev: starting version 149
.
Synthesizing the initial hotplug events...[ 11.050000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
done.
Waiting for /dev to be fully populated...[ 11.260000] r8169 0000:00:01.0: no PCI Express capability
[ 11.260000] eth0: RTL8169sb/8110sb at 0xc8946200, 00:14:fd:10:33:8e, XID 10000000 IRQ 27
[ 11.410000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.410000] r8169 0000:00:02.0: no PCI Express capability
[ 11.490000] eth1: RTL8169sb/8110sb at 0xc894a300, 00:14:fd:10:33:8f, XID 10000000 IRQ 30
[ 12.120000] usbcore: registered new interface driver usbfs
[ 12.140000] usbcore: registered new interface driver hub
[ 12.230000] usbcore: registered new device driver usb
[ 12.500000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.620000] ehci_hcd 0000:00:04.2: EHCI Host Controller
[ 12.700000] ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 12.700000] ehci_hcd 0000:00:04.2: Enabling legacy PCI PM
[ 12.770000] ehci_hcd 0000:00:04.2: irq 29, io mem 0x800a0400
[ 12.790000] ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00
[ 12.790000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.810000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.810000] usb usb1: Product: EHCI Host Controller
[ 12.810000] usb usb1: Manufacturer: Linux 2.6.32-trunk-iop32x ehci_hcd
[ 12.830000] usb usb1: SerialNumber: 0000:00:04.2
[ 12.910000] usb usb1: configuration #1 chosen from 1 choice
[ 12.910000] hub 1-0:1.0: USB hub found
[ 12.970000] hub 1-0:1.0: 4 ports detected
[ 13.170000] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.190000] uhci_hcd 0000:00:04.0: UHCI Host Controller
[ 13.190000] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 13.210000] uhci_hcd 0000:00:04.0: irq 28, io base 0x90000800
[ 13.210000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.210000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.230000] usb usb2: Product: UHCI Host Controller
[ 13.230000] usb usb2: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd
[ 13.230000] usb usb2: SerialNumber: 0000:00:04.0
[ 13.250000] usb usb2: configuration #1 chosen from 1 choice
[ 13.250000] hub 2-0:1.0: USB hub found
[ 13.250000] hub 2-0:1.0: 2 ports detected
[ 13.250000] uhci_hcd 0000:00:04.1: UHCI Host Controller
[ 13.270000] uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
[ 13.280000] uhci_hcd 0000:00:04.1: irq 27, io base 0x90000820
[ 13.280000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.290000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.300000] usb usb3: Product: UHCI Host Controller
[ 13.300000] usb usb3: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd
[ 13.310000] usb usb3: SerialNumber: 0000:00:04.1
[ 13.310000] usb usb3: configuration #1 chosen from 1 choice
[ 13.360000] hub 3-0:1.0: USB hub found
[ 13.360000] hub 3-0:1.0: 2 ports detected
done.
Activating swap...[ 14.690000] Adding 369452k swap on /dev/sda5. Priority:-1 extents:1 across:369452k
done.
Checking root file system...fsck from util-linux-ng 2.16.2
e2fsck 1.41.9 (22-Aug-2009)
/dev/sda2: clean, 15787/427392 files, 177930/1708914 blocks
done.
[ 15.370000] EXT3 FS on sda2, internal journal
Cleaning up ifupdown....
Loading kernel modules...[ 16.050000] loop: module loaded
done.
Checking file systems...fsck from util-linux-ng 2.16.2
e2fsck 1.41.9 (22-Aug-2009)
/dev/sda1: clean, 24/124496 files, 26862/248976 blocks
e2fsck 1.41.9 (22-Aug-2009)
/dev/sda6: clean, 15/4423680 files, 323696/17673500 blocks
done.
Setting up networking....
Mounting local filesystems...[ 19.550000] kjournald starting. Commit interval 5 seconds
[ 19.590000] EXT3 FS on sda6, internal journal
[ 19.600000] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Setting kernel variables (/etc/sysctl.conf)...done.
[ 22.170000] r8169: eth0: link up
Cleaning up temporary files....
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Starting OpenBSD Secure Shell server: sshd[ 26.820000] NET: Registered protocol family 10
[ 26.820000] lo: Disabled Privacy Extensions
[ 26.900000] r8169: eth0: link up
.
Debian GNU/Linux squeeze/sid Unknown-00-14-fd-10-33-8e ttyS0
Unknown-00-14-fd-10-33-8e login:
--
Martin Michlmayr
http://www.cyrius.com/
Reply to: