Your message dated Sat, 18 Jul 2009 00:39:23 +0200 with message-id <20090717223923.GA982@galadriel.inutil.org> and subject line Re: ide-cs segfaults insmod on load has caused the Debian Bug report #426591, regarding ide-cs segfaults insmod on load to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 426591: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=426591 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: ide-cs segfaults insmod on load
- From: Joey Hess <joeyh@debian.org>
- Date: Tue, 29 May 2007 15:31:58 -0400
- Message-id: <20070529193158.GA2136@kitenet.net>
Package: linux-image-2.6.21-1-686 Version: 2.6.21-3 Severity: normal root@kodama:/home/joey>insmod /lib/modules/2.6.21-1-686/kernel/drivers/ide/legacy/ide-cs.ko zsh: segmentation fault insmod /lib/modules/2.6.21-1-686/kernel/drivers/ide/legacy/ide-cs.ko I can reproduce this on multiple laptops. Nothing in dmesg. Here's the end of a strace of that: read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0`\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=1315328, ...}) = 0 mmap2(NULL, 1320356, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e01000 mmap2(0xb7f3e000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13d) = 0xb7f3e000 mmap2(0xb7f41000, 9636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f41000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e00000 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7e006c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 mprotect(0xb7f3e000, 4096, PROT_READ) = 0 munmap(0xb7f44000, 109184) = 0 brk(0) = 0x804b000 brk(0x806c000) = 0x806c000 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ Process 2187 detached -- Package-specific info: ** Version: Linux version 2.6.21-1-686 (Debian 2.6.21-2) (waldi@debian.org) (gcc version 4.1.3 20070514 (prerelease) (Debian 4.1.2-7)) #1 SMP Sat May 19 01:13:28 UTC 2007 ** Not tainted ** Kernel log: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset f (was 40000, writing 400ff) PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 33f13001) PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing b010b010) PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 22802020) PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600) PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ipw2200: Unable to load ucode: -22 ipw2200: Unable to load firmware: -22 ipw2200: Failed to up device ahci 0000:00:1f.2: PORTS_IMPL is zero, forcing 0xf PM: Writing back config space on device 0000:06:03.0 at offset f (was 7000100, writing 580010b) PM: Writing back config space on device 0000:06:03.0 at offset e (was 0, writing 28fc) PM: Writing back config space on device 0000:06:03.0 at offset d (was 0, writing 2800) PM: Writing back config space on device 0000:06:03.0 at offset c (was 0, writing 24fc) PM: Writing back config space on device 0000:06:03.0 at offset b (was 0, writing 2400) PM: Writing back config space on device 0000:06:03.0 at offset a (was 0, writing 3bfff000) PM: Writing back config space on device 0000:06:03.0 at offset 9 (was 0, writing 38000000) PM: Writing back config space on device 0000:06:03.0 at offset 8 (was 0, writing 33fff000) PM: Writing back config space on device 0000:06:03.0 at offset 7 (was 0, writing 30000000) PM: Writing back config space on device 0000:06:03.0 at offset 6 (was 0, writing b00a0706) PM: Writing back config space on device 0000:06:03.0 at offset 4 (was 0, writing b0103000) PM: Writing back config space on device 0000:06:03.0 at offset 3 (was 820000, writing 82a800) PM: Writing back config space on device 0000:06:03.0 at offset 1 (was 2100000, writing 2100007) PM: Writing back config space on device 0000:06:03.1 at offset 4 (was 0, writing b0100000) PM: Writing back config space on device 0000:06:03.1 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.1 at offset 1 (was 2100000, writing 2100106) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0100000-b01007ff] Max Packet=[2048] IR/IT contexts=[4/4] PM: Writing back config space on device 0000:06:03.2 at offset 4 (was 0, writing b0100800) PM: Writing back config space on device 0000:06:03.2 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:06:03.2[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:06:03.3 at offset 4 (was 0, writing b0100c00) PM: Writing back config space on device 0000:06:03.3 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:03.4 at offset 4 (was 0, writing b0101000) PM: Writing back config space on device 0000:06:03.4 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:04.0 at offset 5 (was 0, writing b0101400) PM: Writing back config space on device 0000:06:04.0 at offset 4 (was 1, writing 2001) PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 0, writing 2000) PM: Writing back config space on device 0000:06:04.0 at offset 1 (was 2900000, writing 2900107) eth0: link down wlan0: Coming out of suspend... PCI: Enabling device 0000:06:05.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:06:05.0 at offset f (was 18030100, writing 1803010b) PM: Writing back config space on device 0000:06:05.0 at offset 4 (was 0, writing b0102000) PM: Writing back config space on device 0000:06:05.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:06:05.0 at offset 1 (was 2900002, writing 2900106) pnp: Failed to activate device 00:07. pnp: Failed to activate device 00:08. ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 0) usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2 usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2 usbdev5.1: PM: resume from 0, parent usb5 still 2 usbdev3.2_ep00: PM: resume from 0, parent 3-1 still 2 usbdev3.2_ep81: PM: resume from 0, parent 3-1:1.0 still 2 usbdev3.2_ep02: PM: resume from 0, parent 3-1:1.0 still 2 usbdev3.2: PM: resume from 0, parent 3-1 still 2 usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 2 hci_usb 4-2:1.0: PM: resume from 2, parent 4-2 still 2 hci0: PM: resume from 0, parent 4-2:1.0 still 2 usbdev4.2_ep81: PM: resume from 0, parent 4-2:1.0 still 2 usbdev4.2_ep02: PM: resume from 0, parent 4-2:1.0 still 2 usbdev4.2_ep82: PM: resume from 0, parent 4-2:1.0 still 2 hci_usb 4-2:1.1: PM: resume from 2, parent 4-2 still 2 usbdev4.2_ep03: PM: resume from 0, parent 4-2:1.1 still 2 usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.1 still 2 usb 4-2:1.2: PM: resume from 2, parent 4-2 still 2 usbdev4.2: PM: resume from 0, parent 4-2 still 2 Restarting tasks ... <6>usb 3-1: USB disconnect, address 2 usb 4-2: USB disconnect, address 2 done. ata1: waiting for device to spin up (8 secs) usb 3-1: new full speed USB device using uhci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/33 tun1: Disabled Privacy Extensions hda_intel: azx_get_response timeout, switching to single_cmd mode... pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xb0100000-0xb01fffff: excluding 0xb0100000-0xb010ffff pcmcia: registering new device pcmcia0.0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 ** Loaded modules: Module Size Used by ide_cs 10080 0 sd_mod 19904 0 pl2303 19396 0 usbserial 31528 1 pl2303 uhci_hcd 22608 0 snd_rtctimer 3520 0 sdhci 16652 0 ipw2200 130628 0 hci_usb 16220 0 i915 21280 2 drm 73908 3 i915 binfmt_misc 10984 1 rfcomm 35480 0 l2cap 22208 3 rfcomm nfsd 202800 17 exportfs 5472 1 nfsd ppdev 8580 0 parport_pc 32740 0 lp 10884 0 parport 33672 3 ppdev,parport_pc,lp button 7952 0 ac 5220 0 battery 10020 0 tun 10304 2 ipv6 236192 30 nfs 222444 5 lockd 58248 3 nfsd,nfs nfs_acl 3520 2 nfsd,nfs sunrpc 154972 13 nfsd,nfs,lockd,nfs_acl fuse 41684 1 video 16488 0 usb_storage 76384 0 cpufreq_userspace 4128 1 cpufreq_ondemand 7884 0 speedstep_centrino 9220 1 freq_table 4512 2 cpufreq_ondemand,speedstep_centrino sbp2 21188 0 ide_generic 1344 0 [permanent] ide_cd 36512 0 joydev 9152 0 tsdev 7520 0 snd_hda_intel 20248 5 snd_hda_codec 198336 1 snd_hda_intel snd_pcm_oss 39168 0 snd_pcm 71940 5 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_mixer_oss 15328 1 snd_pcm_oss snd_seq_dummy 3748 0 snd_seq_oss 29248 0 pcmcia 35276 1 ide_cs snd_seq_midi 8160 0 snd_rawmidi 22400 1 snd_seq_midi ieee80211 30984 1 ipw2200 ieee80211_crypt 5792 1 ieee80211 pcspkr 3136 0 psmouse 34952 0 rtc 12760 1 snd_rtctimer snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi mmc_core 26340 1 sdhci serio_raw 6564 0 firmware_class 9408 2 ipw2200,pcmcia i2c_i801 8560 0 yenta_socket 24876 2 rsrc_nonstatic 11968 1 yenta_socket pcmcia_core 36884 4 ide_cs,pcmcia,yenta_socket,rsrc_nonstatic snd_seq 46160 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 20868 3 snd_rtctimer,snd_pcm,snd_seq snd_seq_device 7596 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq i2c_core 20480 1 i2c_i801 snd 48132 18 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device iTCO_wdt 9956 0 bluetooth 48484 3 hci_usb,rfcomm,l2cap intel_agp 23004 1 agpgart 32168 3 drm,intel_agp evdev 9216 5 eth1394 18276 0 soundcore 7424 1 snd snd_page_alloc 9512 2 snd_hda_intel,snd_pcm ext3 120904 1 jbd 55208 1 ext3 mbcache 8164 1 ext3 dm_mirror 20116 0 dm_snapshot 16420 0 dm_mod 52556 2 dm_mirror,dm_snapshot sg 32476 0 sr_mod 16100 0 cdrom 32768 2 ide_cd,sr_mod ata_piix 13508 0 ide_disk 15648 3 ahci 19940 0 ata_generic 8100 0 libata 109108 3 ata_piix,ahci,ata_generic scsi_mod 133740 6 sd_mod,usb_storage,sbp2,sg,sr_mod,libata piix 9508 0 [permanent] 8139too 25536 0 generic 4804 0 [permanent] ide_core 115016 7 ide_cs,usb_storage,ide_generic,ide_cd,ide_disk,piix,generic 8139cp 22336 0 mii 5280 2 8139too,8139cp ohci1394 32432 0 ieee1394 89560 3 sbp2,eth1394,ohci1394 ehci_hcd 30796 0 usbcore 123304 7 pl2303,usbserial,uhci_hcd,hci_usb,usb_storage,ehci_hcd thermal 14120 0 processor 30888 2 speedstep_centrino,thermal fan 4868 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1400 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 34000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:1326] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at 1420 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 1440 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 1460 [size=32] 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1480 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: 0000000030000000-0000000033ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1410 [size=16] 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 14b8 [size=8] Region 1: I/O ports at 140c [size=4] Region 2: I/O ports at 14b0 [size=8] Region 3: I/O ports at 1408 [size=4] Region 4: I/O ports at 14a0 [size=16] Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e7] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 14c0 [size=32] 06:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Fujitsu Limited. Unknown device [10cf:1254] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0103000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-33fff000 (prefetchable) Memory window 1: 38000000-3bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 06:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:1255] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> 06:03.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) Subsystem: Fujitsu Limited. Unknown device [10cf:1323] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08) Subsystem: Fujitsu Limited. Unknown device [10cf:1257] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03) Subsystem: Fujitsu Limited. Unknown device [10cf:1324] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Fujitsu Limited. Unknown device [10cf:12ce] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at b0101400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4223] (rev 05) Subsystem: Intel Corporation Unknown device [8086:1030] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-1-686 depends on: ii initramfs-tools [linux-initr 0.88 tools for generating an initramfs ii module-init-tools 3.3-pre11-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-1-686 recommends: ii libc6-i686 2.5-9 GNU C Library: Shared libraries [i -- debconf information excluded -- see shy joAttachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: 426591-done@bugs.debian.org
- Cc: joeyh@debian.org, Sam Clegg <sam@superduper.net>
- Subject: Re: ide-cs segfaults insmod on load
- From: Moritz Muehlenhoff <jmm@inutil.org>
- Date: Sat, 18 Jul 2009 00:39:23 +0200
- Message-id: <20090717223923.GA982@galadriel.inutil.org>
- In-reply-to: <20081221103441.GA7308@galadriel.inutil.org>
- References: <1181492530.19221.22.camel@localhost.localdomain> <20081221103441.GA7308@galadriel.inutil.org>
On Sun, Dec 21, 2008 at 11:34:41AM +0100, Moritz Muehlenhoff wrote: > On Sun, Jun 10, 2007 at 05:22:10PM +0100, Sam Clegg wrote: > > I think this is a dup of #425458. Seems that insmod upstream has a > > segfault. > > Joey, can you confirm that this was fixed by the module-init-tools > update? No further feedback, closing the bug. If anyone reencounters the problem, please reopen this bug. Cheers, Moritz
--- End Message ---