Bug#522519: linux-image-2.6.26-1-amd64: Error during Update Manager.
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Severity: important
Error reported by Update Manager:
E: /var/cache/apt/archives/linux-image-2.6.26-1-amd64_2.6.26-13lenny2_amd64.deb: failed in buffer_write(fd) (10,
ret=-1)
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009
** Command line:
root=/dev/sdb1 ro quiet
** Not tainted
** Kernel log:
[ 9.715329] sd 0:0:0:0: [sda] Write Protect is off
[ 9.715331] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.715347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.719135] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 9.719135] sd 0:0:0:0: [sda] Write Protect is off
[ 9.719135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.719135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.719135] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 9.735079] sda1
[ 9.735171] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.735171] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 9.735171] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.735171] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.735171] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.735171] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 9.735171] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.735171] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.735171] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.735171] sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.737334] Uniform CD-ROM driver Revision: 3.20
[ 9.737334] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.739258] sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[ 9.776114] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 9.781335] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.781335] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 9.788117] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.788117] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.788117] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.788117] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 9.798987] usb 3-2: configuration #1 chosen from 1 choice
[ 9.800765] usb 3-2: New USB device found, idVendor=0d62, idProduct=001c
[ 9.800768] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.800770] usb 3-2: Product: USB+PS2 Keyboard
[ 9.800771] usb 3-2: Manufacturer: Generic
[ 9.802654] usbcore: registered new interface driver hiddev
[ 9.876287] hiddev96hidraw0: USB HID v1.10 Device [CPS CP685AVR-G] on usb-0000:00:13.0-2
[ 9.887182] input: Kensington USB/PS2 Wheel Mouse as /class/input/input1
[ 9.904698] input,hidraw1: USB HID v1.10 Mouse [Kensington USB/PS2 Wheel Mouse] on usb-0000:00:13.1-1
[ 9.912656] input: Generic USB+PS2 Keyboard as /class/input/input2
[ 9.936694] input,hidraw2: USB HID v1.10 Keyboard [Generic USB+PS2 Keyboard] on usb-0000:00:13.1-2
[ 9.951606] input: Generic USB+PS2 Keyboard as /class/input/input3
[ 9.971633] input,hidraw3: USB HID v1.10 Device [Generic USB+PS2 Keyboard] on usb-0000:00:13.1-2
[ 9.971647] usbcore: registered new interface driver usbhid
[ 9.971650] usbhid: v2.6:USB HID core driver
[ 10.051609] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 10.051609] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 10.051609] scsi6 : pata_marvell
[ 10.051609] scsi7 : pata_marvell
[ 10.051609] ata7: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 19
[ 10.051609] ata8: PATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 19
[ 10.483843] PM: Starting manual resume from disk
[ 10.547425] kjournald starting. Commit interval 5 seconds
[ 10.547425] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.058840] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001247c27]
[ 11.699258] udevd version 125 started
[ 12.195605] input: Power Button (FF) as /class/input/input4
[ 12.260979] ACPI: Power Button (FF) [PWRF]
[ 12.261071] input: Power Button (CM) as /class/input/input5
[ 12.330571] ACPI: Power Button (CM) [PWRB]
[ 12.330671] ACPI: WMI: Mapper loaded
[ 12.395519] input: PC Speaker as /class/input/input6
[ 12.533940] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 12.761113] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.790612] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 14.661573] Adding 24001068k swap on /dev/sdb7. Priority:-1 extents:1 across:24001068k
[ 14.870285] EXT3 FS on sdb1, internal journal
[ 15.818585] loop: module loaded
[ 16.957661] kjournald starting. Commit interval 5 seconds
[ 16.957661] EXT3 FS on sdb9, internal journal
[ 16.957661] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.971985] kjournald starting. Commit interval 5 seconds
[ 16.971985] EXT3 FS on sdb8, internal journal
[ 16.971985] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.983985] kjournald starting. Commit interval 5 seconds
[ 16.987450] EXT3 FS on sdb5, internal journal
[ 16.987450] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.007445] kjournald starting. Commit interval 5 seconds
[ 17.007445] EXT3 FS on sdb6, internal journal
[ 17.007445] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.781016] usb 2-2: USB disconnect, address 2
[ 18.625344] sky2 eth0: enabling interface
[ 20.594014] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 20.756557] usb 2-2: configuration #1 chosen from 1 choice
[ 20.832696] hiddev96hidraw0: USB HID v1.10 Device [CPS CP685AVR-G] on usb-0000:00:13.0-2
[ 20.832696] usb 2-2: New USB device found, idVendor=0764, idProduct=0501
[ 20.832696] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 20.832696] usb 2-2: Product: CP685AVR-G
[ 20.832696] usb 2-2: Manufacturer: CPS
[ 21.057722] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 21.398876] powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
[ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 21.398876] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 21.398877] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 22.359544] NET: Registered protocol family 10
[ 22.359544] lo: Disabled Privacy Extensions
[ 22.920279] pnp: the driver 'parport_pc' has been registered
[ 22.922856] lp: driver loaded but no devices found
[ 22.950973] ppdev: user-space parallel port driver
[ 42.764132] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
battery 16904 0
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
ipv6 288328 22
cpufreq_userspace 8452 0
cpufreq_conservative 11784 0
cpufreq_ondemand 11792 0
cpufreq_stats 9120 0
cpufreq_powersave 6400 0
freq_table 9344 2 cpufreq_ondemand,cpufreq_stats
loop 19468 0
snd_hda_intel 434904 1
snd_pcm 81672 1 snd_hda_intel
snd_seq 54304 0
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 1 snd_seq
snd 63688 7 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
psmouse 42268 0
soundcore 12064 1 snd
i2c_piix4 13072 0
serio_raw 9860 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
pcspkr 7040 0
i2c_core 27936 1 i2c_piix4
wmi 11712 0
button 11680 0
evdev 14208 4
ext3 125072 5
jbd 51240 1 ext3
mbcache 12804 1 ext3
sg 36448 0
usbhid 45792 1
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
sr_mod 19652 0
sd_mod 29376 7
cdrom 37928 1 sr_mod
ata_generic 10116 0
pata_marvell 8832 0
ohci1394 32564 0
ieee1394 93816 1 ohci1394
ide_pci_generic 9220 0 [permanent]
atiixp 8324 0 [permanent]
ohci_hcd 25092 0
ahci 33036 6
libata 165472 3 ata_generic,pata_marvell,ahci
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
dock 14112 1 libata
ehci_hcd 36108 0
ide_core 128284 2 ide_pci_generic,atiixp
sky2 48004 0
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956]
Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) [1002:597a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 7000 [size=4]
Region 2: I/O ports at 6000 [size=8]
Region 3: I/O ports at 5000 [size=4]
Region 4: I/O ports at 4000 [size=16]
Region 5: Memory at fe6ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: ata_generic, ide-pci-generic, atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:8288]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV515GL [FireGL V3300] (Primary) [1002:7152] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device [1002:0b02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 9000 [size=256]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV515GL [FireGL V3300] (Secondary) [1002:7172]
Subsystem: ATI Technologies Inc Device [1002:0b03]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe7e0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: ahci, pata_marvell, ata_generic, ide-pci-generic
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c800 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
04:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: ahci, pata_marvell, ata_generic, ide-pci-generic
05:08.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
Reply to: