Bug#561776: dmesg output
Please find the dmesg output below:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-2)
(ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Dec
17 00:26:04 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfd0000 (usable)
[ 0.000000] BIOS-e820: 000000003bfd0000 - 000000003bff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000003bff0c00 - 000000003bffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bffc000 - 000000003c000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3bfd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 base 030000000 mask FF8000000 write-back
[ 0.000000] 3 base 038000000 mask FFC000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 2c7bc000 - 2d01b3c9
[ 0.000000] ACPI: RSDP 000f7840 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 3bff0c84 0002C (v01 COMPAQ CPQ005A 30080620 CPQ
00000001)
[ 0.000000] ACPI: FACP 3bff0c00 00084 (v02 COMPAQ CPQ005A 00000002 CPQ
00000001)
[ 0.000000] ACPI: DSDT 3bff0cb0 0607E (v01 COMPAQ EVON800 00010000 MSFT
0100000E)
[ 0.000000] ACPI: FACS 3bffbe80 00040
[ 0.000000] ACPI: SSDT 3bff6d2e 002A7 (v01 COMPAQ CPQGysr 00001001 MSFT
0100000E)
[ 0.000000] 75MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a0334] TEXT DATA BSS ==>
[0001000000 - 00014a0334]
[ 0.000000] #4 [002c7bc000 - 002d01b3c9] RAMDISK ==>
[002c7bc000 - 002d01b3c9]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #6 [00014a1000 - 00014a714b] BRK ==>
[00014a1000 - 00014a714b]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==>
[0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003bfd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bfd0
[ 0.000000] On node 0 totalpages: 245615
[ 0.000000] free_area_init_node: node 0, pgdat c138eb60, node_mem_map
c14a9000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 152 pages used for memmap
[ 0.000000] HighMem zone: 19258 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with
"lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3c000000 (gap:
3c000000:c4000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34040 r0 d23304
u4194304
[ 0.000000] pcpu-alloc: s34040 r0 d23304 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 243695
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686
root=UUID=c272d478-0f67-460e-9a36-adf5071c99b5 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003bfd0)
[ 0.000000] Memory: 960100k/982848k available (2408k kernel code, 21928k
reserved, 1272k data, 364k init, 77640k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f4000 ( 364 kB)
[ 0.000000] .data : 0xc125a109 - 0xc13982f8 (1272 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125a109 (2408 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1592.338 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3184.67 BogoMIPS (lpj=6369352)
[ 0.004040] Security Framework initialized
[ 0.004055] SELinux: Disabled at boot.
[ 0.004066] Mount-cache hash table entries: 512
[ 0.004287] Initializing cgroup subsys ns
[ 0.004295] Initializing cgroup subsys cpuacct
[ 0.004301] Initializing cgroup subsys devices
[ 0.004305] Initializing cgroup subsys freezer
[ 0.004308] Initializing cgroup subsys net_cls
[ 0.004352] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004355] CPU: L2 cache: 2048K
[ 0.004364] mce: CPU supports 5 MCE banks
[ 0.004381] ------------[ cut here ]------------
[ 0.004401] WARNING: at
/tmp/buildd/linux-2.6-2.6.32/debian/build/source_i386_none/arch/x86/kernel/apic/apic.c:249
native_apic_write_dummy+0x2a/0x35()
[ 0.004405] Hardware name: HP Compaq nc4010 (DW347AV)
[ 0.004408] Modules linked in:
[ 0.004414] Pid: 0, comm: swapper Not tainted 2.6.32-trunk-686 #1
[ 0.004417] Call Trace:
[ 0.004431] [<c1030a5d>] ? warn_slowpath_common+0x5e/0x8a
[ 0.004436] [<c1030a93>] ? warn_slowpath_null+0xa/0xc
[ 0.004441] [<c1014bbd>] ? native_apic_write_dummy+0x2a/0x35
[ 0.004447] [<c1010358>] ? intel_init_thermal+0xdf/0x191
[ 0.004452] [<c100f701>] ? mce_init+0x94/0xa7
[ 0.004457] [<c100fc86>] ? mce_intel_feature_init+0x8/0x4a
[ 0.004468] [<c1254769>] ? mcheck_init+0x25e/0x29a
[ 0.004472] [<c12529a3>] ? identify_cpu+0x395/0x3a4
[ 0.004484] [<c10ad5d4>] ? kmem_cache_alloc+0x79/0xe5
[ 0.004496] [<c139f0f1>] ? identify_boot_cpu+0xa/0x1e
[ 0.004501] [<c139f17f>] ? check_bugs+0x8/0xd8
[ 0.004505] [<c13997f1>] ? start_kernel+0x2fd/0x30c
[ 0.004520] ---[ end trace a7919e7f17c0a725 ]---
[ 0.004524] CPU0: Thermal monitoring enabled (TM2)
[ 0.004542] Performance Events:
[ 0.004545] no APIC, boot with the "lapic" boot parameter to
force-enable it.
[ 0.004548] no hardware sampling interrupt available.
[ 0.004551] p6 PMU driver.
[ 0.004558] ... version: 0
[ 0.004560] ... bit width: 32
[ 0.004562] ... generic registers: 2
[ 0.004564] ... value mask: 00000000ffffffff
[ 0.004567] ... max period: 000000007fffffff
[ 0.004569] ... fixed-purpose events: 0
[ 0.004572] ... event mask: 0000000000000003
[ 0.004579] Checking 'hlt' instruction... OK.
[ 0.020625] SMP alternatives: switching to UP code
[ 0.025478] Freeing SMP alternatives: 13k freed
[ 0.025489] ACPI: Core revision 20090903
[ 0.049135] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.052184] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052190] SMP motherboard not detected.
[ 0.052194] Local APIC not detected. Using dummy APIC emulation.
[ 0.052196] SMP disabled
[ 0.052465] Brought up 1 CPUs
[ 0.052469] Total of 1 processors activated (3184.67 BogoMIPS).
[ 0.053212] CPU0 attaching NULL sched-domain.
[ 0.053881] HP Compaq Laptop series board detected. Selecting
BIOS-method for reboots.
[ 0.056067] regulator: core version 0.5
[ 0.056150] NET: Registered protocol family 16
[ 0.056292] ACPI: bus type pci registered
[ 0.059136] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=1
[ 0.059140] PCI: Using configuration type 1 for base access
[ 0.059614] bio: create slab <bio-0> at 0
[ 0.060465] ACPI: EC: Look up EC in DSDT
[ 0.080145] ACPI: Interpreter enabled
[ 0.080164] ACPI: (supports S0 S3 S4 S5)
[ 0.080189] ACPI: Using PIC for interrupt routing
[ 0.094497] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =
0x62
[ 0.094792] ACPI: Power Resource [C15A] (on)
[ 0.095061] ACPI: Power Resource [C15F] (on)
[ 0.095328] ACPI: Power Resource [C169] (on)
[ 0.095371] ACPI: Power Resource [C17A] (on)
[ 0.095455] ACPI: Power Resource [C1F2] (off)
[ 0.095535] ACPI: Power Resource [C1F3] (off)
[ 0.095614] ACPI: Power Resource [C1F4] (off)
[ 0.095693] ACPI: Power Resource [C1F5] (off)
[ 0.095885] ACPI: No dock devices found.
[ 0.102097] ACPI: PCI Root Bridge [C044] (0000:00)
[ 0.102160] pci 0000:00:00.0: reg 10 32bit mmio pref:
[0xa4000000-0xa7ffffff]
[ 0.102167] pci 0000:00:00.0: reg 14 32bit mmio pref:
[0xa0500000-0xa0500fff]
[ 0.102245] pci 0000:00:06.0: reg 10 io port: [0x3000-0x30ff]
[ 0.102251] pci 0000:00:06.0: reg 14 32bit mmio: [0xa0100000-0xa0100fff]
[ 0.102280] pci 0000:00:06.0: supports D1 D2
[ 0.102283] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.102288] pci 0000:00:06.0: PME# disabled
[ 0.102367] pci 0000:00:08.0: reg 10 32bit mmio: [0xa0180000-0xa0180fff]
[ 0.102374] pci 0000:00:08.0: reg 14 io port: [0x3400-0x34ff]
[ 0.102400] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.102405] pci 0000:00:08.0: PME# disabled
[ 0.102432] pci 0000:00:09.0: reg 10 32bit mmio: [0xa0080000-0xa008ffff]
[ 0.102490] pci 0000:00:0b.0: reg 10 32bit mmio: [0xa0200000-0xa0200fff]
[ 0.102505] pci 0000:00:0b.0: supports D1 D2
[ 0.102508] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102512] pci 0000:00:0b.0: PME# disabled
[ 0.102540] pci 0000:00:0b.1: reg 10 32bit mmio: [0xa0280000-0xa0280fff]
[ 0.102555] pci 0000:00:0b.1: supports D1 D2
[ 0.102558] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102562] pci 0000:00:0b.1: PME# disabled
[ 0.102590] pci 0000:00:0b.2: reg 10 32bit mmio: [0xa0300000-0xa0300fff]
[ 0.102623] pci 0000:00:0b.2: supports D1 D2
[ 0.102626] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102630] pci 0000:00:0b.2: PME# disabled
[ 0.102673] pci 0000:00:10.0: reg 20 io port: [0x3800-0x380f]
[ 0.102733] pci 0000:00:11.0: quirk: region 1000-103f claimed by ali7101
ACPI
[ 0.102738] pci 0000:00:11.0: quirk: region 1100-111f claimed by ali7101
SMB
[ 0.102764] pci 0000:00:12.0: reg 10 32bit mmio: [0xa0380000-0xa0380fff]
[ 0.102794] pci 0000:00:12.0: supports D1 D2
[ 0.102797] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102802] pci 0000:00:12.0: PME# disabled
[ 0.102827] pci 0000:00:12.1: reg 10 32bit mmio: [0xa0400000-0xa0400fff]
[ 0.102857] pci 0000:00:12.1: supports D1 D2
[ 0.102860] pci 0000:00:12.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102865] pci 0000:00:12.1: PME# disabled
[ 0.102891] pci 0000:00:12.2: reg 10 32bit mmio: [0xa0480000-0xa04800ff]
[ 0.102921] pci 0000:00:12.2: supports D1 D2
[ 0.102924] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102928] pci 0000:00:12.2: PME# disabled
[ 0.102975] pci 0000:00:13.0: reg 10 64bit mmio: [0xa0000000-0xa000ffff]
[ 0.102996] pci 0000:00:13.0: reg 30 32bit mmio pref:
[0x000000-0x00ffff]
[ 0.103019] pci 0000:00:13.0: PME# supported from D3hot D3cold
[ 0.103023] pci 0000:00:13.0: PME# disabled
[ 0.103073] pci 0000:01:05.0: reg 10 32bit mmio pref:
[0x98000000-0x9fffffff]
[ 0.103080] pci 0000:01:05.0: reg 14 io port: [0x2000-0x20ff]
[ 0.103086] pci 0000:01:05.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
[ 0.103100] pci 0000:01:05.0: reg 30 32bit mmio pref:
[0x000000-0x01ffff]
[ 0.103117] pci 0000:01:05.0: supports D1 D2
[ 0.103146] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.103151] pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0x900fffff]
[ 0.103156] pci 0000:00:01.0: bridge 32bit mmio pref:
[0x98000000-0x9fffffff]
[ 0.103185] pci_bus 0000:00: on NUMA node 0
[ 0.103192] ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
[ 0.103282] ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
[ 0.128657] ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11)
[ 0.128854] ACPI: PCI Interrupt Link [C0C5] (IRQs 5 *10 11)
[ 0.129050] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10 *11)
[ 0.129220] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10 11) *0, disabled.
[ 0.129415] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 *10 11)
[ 0.129609] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10 11)
[ 0.129803] ACPI: PCI Interrupt Link [C0CA] (IRQs 5 10 *11)
[ 0.129997] ACPI: PCI Interrupt Link [C0CB] (IRQs 5 10 *11)
[ 0.130115] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.130118] vgaarb: loaded
[ 0.130191] PCI: Using ACPI for IRQ routing
[ 0.130360] Switching to clocksource tsc
[ 0.132000] pnp: PnP ACPI init
[ 0.132000] ACPI: bus type pnp registered
[ 0.148102] pnp: PnP ACPI: found 14 devices
[ 0.148105] ACPI: ACPI bus type pnp unregistered
[ 0.148110] PnPBIOS: Disabled by ACPI PNP
[ 0.148122] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.148127] system 00:00: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.148131] system 00:00: iomem range 0x100000-0x3bffffff could not be
reserved
[ 0.148142] system 00:0b: ioport range 0x370-0x371 has been reserved
[ 0.148146] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 0.148150] system 00:0b: ioport range 0x480-0x48f has been reserved
[ 0.148154] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.148158] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 0.148162] system 00:0b: ioport range 0x1400-0x141f has been reserved
[ 0.148166] system 00:0b: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.148170] system 00:0b: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.148177] system 00:0c: ioport range 0x1000-0x107f could not be
reserved
[ 0.148181] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.148186] system 00:0c: iomem range 0xa0500000-0xa0500fff has been
reserved
[ 0.148192] system 00:0d: iomem range 0xcf000-0xcffff has been reserved
[ 0.182896] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.182901] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.182906] pci 0000:00:01.0: MEM window: 0x90000000-0x900fffff
[ 0.182911] pci 0000:00:01.0: PREFETCH window: 0x98000000-0x9fffffff
[ 0.182916] pci 0000:00:0b.0: CardBus bridge, secondary bus 0000:02
[ 0.182920] pci 0000:00:0b.0: IO window: 0x001800-0x0018ff
[ 0.182924] pci 0000:00:0b.0: IO window: 0x001c00-0x001cff
[ 0.182929] pci 0000:00:0b.0: PREFETCH window: 0x3c000000-0x3fffffff
[ 0.182934] pci 0000:00:0b.0: MEM window: 0x40000000-0x43ffffff
[ 0.182939] pci 0000:00:0b.1: CardBus bridge, secondary bus 0000:06
[ 0.182942] pci 0000:00:0b.1: IO window: 0x003c00-0x003cff
[ 0.182946] pci 0000:00:0b.1: IO window: 0x004000-0x0040ff
[ 0.182951] pci 0000:00:0b.1: PREFETCH window: 0x44000000-0x47ffffff
[ 0.182956] pci 0000:00:0b.1: MEM window: 0x48000000-0x4bffffff
[ 0.183341] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
[ 0.183345] PCI: setting IRQ 11 as level-triggered
[ 0.183351] pci 0000:00:0b.0: PCI INT A -> Link[C0C6] -> GSI 11 (level,
low) -> IRQ 11
[ 0.183363] pci 0000:00:0b.1: PCI INT A -> Link[C0C6] -> GSI 11 (level,
low) -> IRQ 11
[ 0.183369] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.183373] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.183376] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.183380] pci_bus 0000:01: resource 1 mem: [0x90000000-0x900fffff]
[ 0.183384] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff]
[ 0.183388] pci_bus 0000:02: resource 0 io: [0x1800-0x18ff]
[ 0.183391] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff]
[ 0.183395] pci_bus 0000:02: resource 2 pref mem [0x3c000000-0x3fffffff]
[ 0.183398] pci_bus 0000:02: resource 3 mem: [0x40000000-0x43ffffff]
[ 0.183402] pci_bus 0000:06: resource 0 io: [0x3c00-0x3cff]
[ 0.183405] pci_bus 0000:06: resource 1 io: [0x4000-0x40ff]
[ 0.183409] pci_bus 0000:06: resource 2 pref mem [0x44000000-0x47ffffff]
[ 0.183413] pci_bus 0000:06: resource 3 mem: [0x48000000-0x4bffffff]
[ 0.183447] NET: Registered protocol family 2
[ 0.183553] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.184034] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.185747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.187007] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.187012] TCP reno registered
[ 0.187254] NET: Registered protocol family 1
[ 0.187307] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.187376] pci 0000:01:05.0: Boot video device
[ 0.187496] Unpacking initramfs...
[ 0.547461] Freeing initrd memory: 8572k freed
[ 0.581282] audit: initializing netlink socket (disabled)
[ 0.581332] type=2000 audit(1261414816.577:1): initialized
[ 0.581848] highmem bounce pool size: 64 pages
[ 0.581857] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.583848] VFS: Disk quotas dquot_6.5.2
[ 0.583949] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.584087] msgmni has been set to 1741
[ 0.584467] alg: No test for stdrng (krng)
[ 0.584556] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.584562] io scheduler noop registered
[ 0.584565] io scheduler anticipatory registered
[ 0.584567] io scheduler deadline registered
[ 0.584612] io scheduler cfq registered (default)
[ 0.584891] isapnp: Scanning for PnP cards...
[ 0.938757] isapnp: No Plug & Play device found
[ 0.940238] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.940379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940533] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.940787] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.941565] ACPI: PCI Interrupt Link [C0CA] enabled at IRQ 11
[ 0.941572] serial 0000:00:08.0: PCI INT A -> Link[C0CA] -> GSI 11
(level, low) -> IRQ 11
[ 0.941609] serial 0000:00:08.0: PCI INT A disabled
[ 0.941747] PNP: PS/2 Controller [PNP0303:C177,PNP0f13:C178] at
0x60,0x64 irq 1,12
[ 0.943383] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.944181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.944196] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.944239] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.944264] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.944288] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.944397] mice: PS/2 mouse device common for all mice
[ 0.944436] Driver 'rtc_cmos' needs updating - please use bus_type
methods
[ 0.944483] rtc_cmos 00:08: RTC can wake from S4
[ 0.944531] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.944563] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.944579] cpuidle: using governor ladder
[ 0.944582] cpuidle: using governor menu
[ 0.944591] No iBFT detected.
[ 0.945037] TCP cubic registered
[ 0.945233] NET: Registered protocol family 10
[ 0.945845] lo: Disabled Privacy Extensions
[ 0.946213] Mobile IPv6
[ 0.946218] NET: Registered protocol family 17
[ 0.946255] Using IPI No-Shortcut mode
[ 0.946341] registered taskstats version 1
[ 0.946663] rtc_cmos 00:08: setting system clock to 2009-12-21 17:00:17
UTC (1261414817)
[ 0.946745] Freeing unused kernel memory: 364k freed
[ 0.947367] Write protecting the kernel text: 2412k
[ 0.947393] Write protecting the kernel read-only data: 872k
[ 0.966035] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.095629] fan PNP0C0B:00: registered as cooling_device0
[ 1.095641] ACPI: Fan [C1F6] (off)
[ 1.095815] fan PNP0C0B:01: registered as cooling_device1
[ 1.095822] ACPI: Fan [C1F7] (off)
[ 1.095987] fan PNP0C0B:02: registered as cooling_device2
[ 1.095993] ACPI: Fan [C1F8] (off)
[ 1.096185] fan PNP0C0B:03: registered as cooling_device3
[ 1.096192] ACPI: Fan [C1F9] (off)
[ 1.105918] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.105929] ACPI: Thermal Zone [TZ1] (36 C)
[ 1.109905] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.109914] ACPI: Thermal Zone [TZ2] (28 C)
[ 1.118857] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.118867] ACPI: Thermal Zone [TZ3] (16 C)
[ 1.394054] usbcore: registered new interface driver usbfs
[ 1.394192] usbcore: registered new interface driver hub
[ 1.394312] usbcore: registered new device driver usb
[ 1.403101] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.403116] ACPI: Sleep Button [C13B]
[ 1.403235] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.403435] ACPI: Lid Switch [C13A]
[ 1.403549] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.403554] ACPI: Power Button [PWRF]
[ 1.403696] Uniform Multi-Platform E-IDE driver
[ 1.413626] Linux agpgart interface v0.103
[ 1.430165] alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev
0xc4)
[ 1.430708] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
[ 1.430714] PCI: setting IRQ 10 as level-triggered
[ 1.430720] ALI15x3_IDE 0000:00:10.0: PCI INT A -> Link[C0C4] -> GSI 10
(level, low) -> IRQ 10
[ 1.430761] alim15x3 0000:00:10.0: not 100% native mode: will probe irqs
later
[ 1.430771] ide0: BM-DMA at 0x3800-0x3807
[ 1.430789] alim15x3 0000:00:10.0: simplex device: DMA forced
[ 1.430792] ide1: BM-DMA at 0x3808-0x380f
[ 1.430805] Probing IDE interface ide0...
[ 1.440812] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
[ 1.440827] ACPI: Video Device [C046] (multi-head: yes rom: no post:
no)
[ 1.442000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.454948] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.716191] hda: HTS541060G9AT00, ATA DISK drive
[ 2.388136] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.388383] hda: UDMA/100 mode selected
[ 2.388615] Probing IDE interface ide1...
[ 2.391595] ide1: no devices on the port
[ 2.391674] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.417589] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.417726] agpgart-ati 0000:00:00.0: Ati IGP345M chipset
[ 2.450511] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xa4000000
[ 2.451050] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
[ 2.451057] ehci_hcd 0000:00:12.2: PCI INT C -> Link[C0C5] -> GSI 10
(level, low) -> IRQ 10
[ 2.451072] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.451122] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 2.452609] SCSI subsystem initialized
[ 2.480434] ehci_hcd 0000:00:12.2: irq 10, io mem 0xa0480000
[ 2.480848] libata version 3.00 loaded.
[ 2.492028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.492080] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.492084] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.492088] usb usb1: Product: EHCI Host Controller
[ 2.492091] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 2.492094] usb usb1: SerialNumber: 0000:00:12.2
[ 2.492187] usb usb1: configuration #1 chosen from 1 choice
[ 2.492233] hub 1-0:1.0: USB hub found
[ 2.492248] hub 1-0:1.0: 5 ports detected
[ 2.492460] tg3.c:v3.102 (September 1, 2009)
[ 2.492951] ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
[ 2.492958] tg3 0000:00:13.0: PCI INT A -> Link[C0C8] -> GSI 10 (level,
low) -> IRQ 10
[ 2.541158] eth0: Tigon3 [partno(BCM5705mA1) rev 3003]
(PCI:33MHz:32-bit) MAC address 00:08:02:ea:e0:4c
[ 2.541164] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet)
(WireSpeed[0])
[ 2.541168] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.541171] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.541217] ohci_hcd 0000:00:12.0: PCI INT A -> Link[C0C5] -> GSI 10
(level, low) -> IRQ 10
[ 2.541240] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.541257] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 2
[ 2.541284] ohci_hcd 0000:00:12.0: irq 10, io mem 0xa0380000
[ 2.626039] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.626044] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.626048] usb usb2: Product: OHCI Host Controller
[ 2.626051] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
[ 2.626054] usb usb2: SerialNumber: 0000:00:12.0
[ 2.626194] usb usb2: configuration #1 chosen from 1 choice
[ 2.626270] hub 2-0:1.0: USB hub found
[ 2.626286] hub 2-0:1.0: 3 ports detected
[ 2.627623] ohci_hcd 0000:00:12.1: PCI INT B -> Link[C0C5] -> GSI 10
(level, low) -> IRQ 10
[ 2.627638] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.627650] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 3
[ 2.627667] ohci_hcd 0000:00:12.1: irq 10, io mem 0xa0400000
[ 2.709840] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.709845] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.709848] usb usb3: Product: OHCI Host Controller
[ 2.709851] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
[ 2.709855] usb usb3: SerialNumber: 0000:00:12.1
[ 2.709956] usb usb3: configuration #1 chosen from 1 choice
[ 2.710034] hub 3-0:1.0: USB hub found
[ 2.710047] hub 3-0:1.0: 2 ports detected
[ 2.720923] ide-gd driver 1.18
[ 2.720972] hda: max request size: 128KiB
[ 2.721274] hda: 117210240 sectors (60011 MB) w/7539KiB Cache,
CHS=65535/16/63
[ 2.721517] hda: cache flushes supported
[ 2.721584] hda: hda1 hda2 < hda5 hda6 >
[ 2.991995] PM: Starting manual resume from disk
[ 3.071279] kjournald starting. Commit interval 5 seconds
[ 3.071292] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.543915] udev: starting version 149
[ 5.227087] ACPI: AC Adapter [C137] (on-line)
[ 5.252608] ACPI: Invalid PBLK length [7]
[ 5.252800] Marking TSC unstable due to TSC halts in idle
[ 5.254274] processor LNXCPU:00: registered as cooling_device4
[ 5.254479] Switching to clocksource acpi_pm
[ 5.360226] ACPI: Battery Slot [C139] (battery present)
[ 5.360480] ACPI: Battery Slot [C138] (battery absent)
[ 5.446232] ACPI: WMI: Mapper loaded
[ 5.467539] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.640546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.671192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.032729] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps:
0xa84793/0x100000
[ 6.032739] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.045248] parport_pc 00:04: reported by Plug and Play ACPI
[ 6.045320] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.046867] cfg80211: Using static regulatory domain info
[ 6.046870] cfg80211: Regulatory domain: US
[ 6.046873] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 6.046877] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700
mBm)
[ 6.046881] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 6.046885] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 6.046888] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 6.046892] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 6.046896] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000
mBm)
[ 6.047202] cfg80211: Calling CRDA for country: US
[ 6.085506] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input6
[ 6.086837] yenta_cardbus 0000:00:0b.0: CardBus bridge found [0e11:005a]
[ 6.086858] yenta_cardbus 0000:00:0b.0: O2: res at 0x94/0xD4: 00/ea
[ 6.086861] yenta_cardbus 0000:00:0b.0: O2: enabling read prefetch/write
burst
[ 6.219927] yenta_cardbus 0000:00:0b.0: ISA IRQ mask 0x0038, PCI irq 11
[ 6.219934] yenta_cardbus 0000:00:0b.0: Socket status: 30000006
[ 6.220780] ACPI: I/O resource ali1535_smbus [0x1100-0x111f] conflicts
with ACPI region C092 [0x1100-0x1107]
[ 6.220834] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 6.220838] ali1535_smbus 0000:00:11.0: ALI1535 not detected, module not
inserted.
[ 6.220919] yenta_cardbus 0000:00:0b.1: CardBus bridge found [0e11:005a]
[ 6.349092] yenta_cardbus 0000:00:0b.1: ISA IRQ mask 0x0038, PCI irq 11
[ 6.349098] yenta_cardbus 0000:00:0b.1: Socket status: 30000006
[ 6.350176] ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized
- upgrade BIOS or use force_addr=0xaddr
[ 6.350232] ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not
inserted.
[ 6.352371] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[ 6.352393] PCI: setting IRQ 5 as level-triggered
[ 6.352400] ath5k 0000:00:09.0: PCI INT A -> Link[C0C9] -> GSI 5 (level,
low) -> IRQ 5
[ 6.352569] ath5k 0000:00:09.0: registered as 'phy0'
[ 6.426075] ath: EEPROM regdomain: 0x60
[ 6.426079] ath: EEPROM indicates we should expect a direct regpair map
[ 6.426087] ath: Country alpha2 being used: 00
[ 6.426090] ath: Regpair used: 0x60
[ 6.602071] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
clean.
[ 6.604463] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 6.605305] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 6.606118] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 6.607190] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 6.854863] phy0: Selected rate control algorithm 'minstrel'
[ 6.855756] Registered led device: ath5k-phy0::rx
[ 6.855777] Registered led device: ath5k-phy0::tx
[ 6.855783] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 6.855787] ath5k phy0: RF5111 5GHz radio found (0x17)
[ 6.855790] ath5k phy0: RF2111 2GHz radio found (0x23)
[ 6.914967] ACPI: PCI Interrupt Link [C0CB] enabled at IRQ 11
[ 6.914976] ALI 5451 0000:00:06.0: PCI INT A -> Link[C0CB] -> GSI 11
(level, low) -> IRQ 11
[ 7.010702] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
clean.
[ 7.013080] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 7.013924] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
[ 7.014735] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
[ 7.015813] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[ 11.562258] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio4/serio5/input/input7
[ 11.676261] AC'97 1 does not respond - RESET
[ 11.692251] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 11.692305] ali mixer 1 creating error.
[ 12.746971] Adding 2184800k swap on /dev/hda5. Priority:-1 extents:1
across:2184800k
[ 12.896899] EXT3 FS on hda1, internal journal
[ 13.003204] loop: module loaded
[ 13.799833] kjournald starting. Commit interval 5 seconds
[ 13.800091] EXT3 FS on hda6, internal journal
[ 13.800099] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.490795] tg3 0000:00:13.0: firmware: requesting tigon/tg3_tso5.bin
[ 15.886132] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.148111] fuse init (API version 7.13)
[ 16.355512] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 17.280645] apm: BIOS not found.
[ 17.898381] lp0: using parport0 (interrupt-driven).
[ 17.950930] ppdev: user-space parallel port driver
[ 20.469786] Bluetooth: Core ver 2.15
[ 20.469879] NET: Registered protocol family 31
[ 20.469881] Bluetooth: HCI device and connection manager initialized
[ 20.469886] Bluetooth: HCI socket layer initialized
[ 20.512796] Bluetooth: L2CAP ver 2.14
[ 20.512805] Bluetooth: L2CAP socket layer initialized
[ 20.521321] Bluetooth: RFCOMM TTY layer initialized
[ 20.521326] Bluetooth: RFCOMM socket layer initialized
[ 20.521328] Bluetooth: RFCOMM ver 1.11
[ 20.630841] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.630845] Bluetooth: BNEP filters: protocol multicast
[ 20.689955] Bridge firewalling registered
[ 21.017962] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.017973] Bluetooth: SCO socket layer initialized
[ 24.775440] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.097188] pci 0000:01:05.0: PCI INT A -> Link[C0C4] -> GSI 10 (level,
low) -> IRQ 10
[ 27.284733] [drm] Initialized drm 1.1.0 20060810
[ 27.381401] [drm] radeon defaulting to userspace modesetting.
[ 27.386369] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on
minor 0
[ 27.814673] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
[ 27.814715] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode
[ 27.814804] pci 0000:01:05.0: putting AGP V2 device into 4x mode
[ 28.001081] [drm] Setting GART location based on new memory map
[ 28.001215] [drm] Loading R100 Microcode
[ 28.002031] platform radeon_cp.0: firmware: requesting
radeon/R100_cp.bin
[ 28.080282] [drm] writeback test succeeded in 1 usecs
[ 39.286971] tg3 0000:00:13.0: PME# enabled
[ 39.287021] pci0000:00: wake-up capability enabled by ACPI
[ 39.311222] pci0000:00: wake-up capability disabled by ACPI
[ 39.311232] tg3 0000:00:13.0: PME# disabled
[ 39.971733] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.937568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Reply to: