--- Begin Message ---
Package: linux-image-2.6.30-2-686
Version: 2.6.30-8squeeze1
Severity: important
rt2860sta 1.8.1 didn't work on 2.6.30, ralinks provided the driver
source v2.2.0.0 which works on 2.6.30 [1].
and if I manually installed rt2860 2.2.0.0, after upgrading the kernel
package, system will use the 1.8.1 which comes with kernel package
instead of 2.2.0.0 I installed, so it won't work until I manually delete
the 1.8.1 kernel module.
[1] http://www.ralinktech.com/support.php?s=2
-- Package-specific info:
** Version:
Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-686 root=/dev/mapper/LuaLua-root ro quiet
** Tainted: G (1024)
** Kernel log:
[21937.909895] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21944.968859] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21952.057715] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21959.206724] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21966.275650] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21973.344593] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21980.393565] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21987.462463] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21994.521400] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22001.500358] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22008.550071] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22015.728538] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22022.787345] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22029.848451] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22038.855397] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22046.293623] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22053.402679] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22060.472963] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22069.706245] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22076.739052] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22083.878141] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22090.998685] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22100.467821] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22181.931337] rt2860 0000:03:00.0: setting latency timer to 64
[22181.931737]
[22181.931740]
[22181.931743] === pAd = f89a8000, size = 486984 ===
[22181.931746]
[22181.931753] <-- RTMPAllocAdapterBlock, Status=0
[22181.931759] pAd->CSRBaseAddress =0xf83e0000, csr_addr=0xf83e0000!
[22181.931790] ra0 (): not using net_device_ops yet
[22185.680588] RX DESC f6926000 size = 2048
[22185.681270] <-- RTMPAllocTxRxRingMemory, Status=0
[22185.686482] Key1Str is Invalid key length(0) or Type(0)
[22185.686532] Key2Str is Invalid key length(0) or Type(0)
[22185.686581] Key3Str is Invalid key length(0) or Type(0)
[22185.686636] Key4Str is Invalid key length(0) or Type(0)
[22185.687380] 1. Phy Mode = 5
[22185.687387] 2. Phy Mode = 5
[22185.712779] RTMPSetPhyMode: channel is out of range, use first channel=1
[22185.720182] 3. Phy Mode = 9
[22185.724906] MCS Set = ff ff 00 00 01
[22185.726581] <==== rt28xx_init, Status=0
[22185.726656] 0x1300 = 00064300
[22187.185016] AsicSwitchChannel: TxPwer=6
[22187.185023] AsicSwitchChannel: TxPwer2=6
[22187.273016] AsicSwitchChannel: TxPwer=6
[22187.273023] AsicSwitchChannel: TxPwer2=6
[22187.361015] AsicSwitchChannel: TxPwer=6
[22187.361022] AsicSwitchChannel: TxPwer2=6
[22187.449021] AsicSwitchChannel: TxPwer=6
[22187.449028] AsicSwitchChannel: TxPwer2=6
[22187.537020] AsicSwitchChannel: TxPwer=6
[22187.537027] AsicSwitchChannel: TxPwer2=6
[22187.625020] AsicSwitchChannel: TxPwer=6
[22187.625028] AsicSwitchChannel: TxPwer2=6
[22187.713018] AsicSwitchChannel: TxPwer=6
[22187.713025] AsicSwitchChannel: TxPwer2=6
[22187.801018] AsicSwitchChannel: TxPwer=6
[22187.801024] AsicSwitchChannel: TxPwer2=6
[22187.889020] AsicSwitchChannel: TxPwer=6
[22187.889028] AsicSwitchChannel: TxPwer2=6
[22187.977020] AsicSwitchChannel: TxPwer=6
[22187.977027] AsicSwitchChannel: TxPwer2=6
[22188.065023] AsicSwitchChannel: TxPwer=6
[22188.065032] AsicSwitchChannel: TxPwer2=6
[22188.153019] AsicSwitchChannel: TxPwer=6
[22188.153025] AsicSwitchChannel: TxPwer2=6
[22188.241018] AsicSwitchChannel: TxPwer=6
[22188.241025] AsicSwitchChannel: TxPwer2=6
[22188.329016] AsicSwitchChannel: TxPwer=6
[22188.329023] AsicSwitchChannel: TxPwer2=6
[22188.417017] AsicSwitchChannel: TxPwer=6
[22188.417024] AsicSwitchChannel: TxPwer2=6
[22188.505014] AsicSwitchChannel: TxPwer=6
[22188.505021] AsicSwitchChannel: TxPwer2=6
[22188.593017] AsicSwitchChannel: TxPwer=6
[22188.593023] AsicSwitchChannel: TxPwer2=6
[22188.681101] AsicSwitchChannel: TxPwer=6
[22188.681108] AsicSwitchChannel: TxPwer2=6
[22188.769019] AsicSwitchChannel: TxPwer=6
[22188.769026] AsicSwitchChannel: TxPwer2=6
[22188.857015] AsicSwitchChannel: TxPwer=6
[22188.857022] AsicSwitchChannel: TxPwer2=6
[22188.945021] AsicSwitchChannel: TxPwer=6
[22188.945028] AsicSwitchChannel: TxPwer2=6
[22189.033019] AsicSwitchChannel: TxPwer=6
[22189.033026] AsicSwitchChannel: TxPwer2=6
[22189.121022] AsicSwitchChannel: TxPwer=6
[22189.121029] AsicSwitchChannel: TxPwer2=6
[22189.209016] AsicSwitchChannel: TxPwer=6
[22189.209023] AsicSwitchChannel: TxPwer2=6
[22189.297015] AsicSwitchChannel: TxPwer=6
[22189.297021] AsicSwitchChannel: TxPwer2=6
[22189.385025] AsicSwitchChannel: TxPwer=6
[22189.385032] AsicSwitchChannel: TxPwer2=6
[22196.509012] ra0: no IPv6 routers present
[24053.552189] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[26624.265999] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[26628.836063] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
** Loaded modules:
Module Size Used by
rt2860sta 536664 1
nfsd 204004 9
lockd 57840 1 nfsd
nfs_acl 2640 1 nfsd
auth_rpcgss 31356 1 nfsd
sunrpc 163400 8 nfsd,lockd,nfs_acl,auth_rpcgss
i915 148936 0
drm 137720 1 i915
i2c_algo_bit 4860 1 i915
ppdev 6348 0
lp 8012 0
parport 31148 2 ppdev,lp
sco 8816 2
bridge 39836 0
stp 2112 1 bridge
bnep 10796 2
rfcomm 30272 0
l2cap 18088 6 bnep,rfcomm
bluetooth 46960 6 sco,bnep,rfcomm,l2cap
appletalk 25920 20
binfmt_misc 7088 1
cpufreq_userspace 2736 0
cpufreq_stats 3520 0
cpufreq_conservative 6256 0
cpufreq_powersave 1292 0
uinput 6456 1
fuse 47520 1
ext2 54020 1
mbcache 6924 1 ext2
loop 13288 0
snd_hda_codec_realtek 178564 1
snd_hda_intel 22192 0
snd_hda_codec 63596 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6120 1 snd_hda_codec
snd_pcm_oss 32232 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62416 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 5688 0
snd_rawmidi 18596 1 snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
snd_seq 42304 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17460 2 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 8580 0
snd 49028 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core 20812 4 i915,drm,i2c_algo_bit,i2c_i801
pcspkr 2104 0
psmouse 37496 0
serio_raw 4560 0
evdev 8028 8
crc_itu_t 2148 0
rng_core 3672 0
asus_atk0110 6616 0
processor 34496 0
soundcore 6184 1 snd
snd_page_alloc 8116 2 snd_hda_intel,snd_pcm
button 5060 0
xfs 432748 1
exportfs 3760 2 nfsd,xfs
dm_mod 49832 6
usb_storage 48532 0
sd_mod 28676 3
crc_t10dif 1632 1 sd_mod
ide_pci_generic 3632 0
ide_core 87676 1 ide_pci_generic
ata_generic 4340 0
ata_piix 20816 2
uhci_hcd 19072 0
libata 150808 2 ata_generic,ata_piix
intel_agp 23052 1
video 18044 1 i915
output 2604 1 video
ehci_hcd 29616 0
agpgart 30836 2 drm,intel_agp
scsi_mod 131572 3 usb_storage,sd_mod,libata
r8169 27596 0
mii 4664 1 r8169
usbcore 125852 4 usb_storage,uhci_hcd,ehci_hcd
thermal 12580 0
fan 4044 0
thermal_sys 13140 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8331]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000bfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa700000-fe6fffff
Prefetchable memory behind bridge: 00000000bbe00000-00000000bfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feb3fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
Subsystem: RaLink Device [1814:2790]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2860
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at dc00 [size=256]
Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at bfef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-2-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-2-686 recommends:
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-2-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-686/postinst/bootloader-test-error-2.6.30-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-686/preinst/failed-to-move-modules-2.6.30-2-686:
linux-image-2.6.30-2-686/preinst/lilo-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/old-dir-initrd-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/initrd-2.6.30-2-686:
linux-image-2.6.30-2-686/preinst/elilo-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/depmod-error-2.6.30-2-686: false
linux-image-2.6.30-2-686/postinst/old-initrd-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/abort-install-2.6.30-2-686:
linux-image-2.6.30-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-686/preinst/bootloader-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/bootloader-error-2.6.30-2-686:
linux-image-2.6.30-2-686/prerm/removing-running-kernel-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/overwriting-modules-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/abort-overwrite-2.6.30-2-686:
linux-image-2.6.30-2-686/postinst/depmod-error-initrd-2.6.30-2-686: false
linux-image-2.6.30-2-686/postinst/create-kimage-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/prerm/would-invalidate-boot-loader-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-686/postinst/old-system-map-link-2.6.30-2-686: true
--- End Message ---