[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#560344: linux-image-2.6.30-2-686: rt2860sta 1.8.1 didn't work in 2.6.30, should use a newer version



Package: linux-image-2.6.30-2-686
Version: 2.6.30-8squeeze1
Severity: important


rt2860sta 1.8.1 didn't work on 2.6.30, ralinks provided the driver
source v2.2.0.0 which works on 2.6.30 [1].

and if I manually installed rt2860 2.2.0.0, after upgrading the kernel
package, system will use the 1.8.1 which comes with kernel package
instead of 2.2.0.0 I installed, so it won't work until I manually delete
the 1.8.1 kernel module.

[1] http://www.ralinktech.com/support.php?s=2


-- Package-specific info:
** Version:
Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-686 root=/dev/mapper/LuaLua-root ro quiet

** Tainted: G (1024)

** Kernel log:
[21937.909895] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21944.968859] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21952.057715] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21959.206724] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21966.275650] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21973.344593] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21980.393565] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21987.462463] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[21994.521400] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22001.500358] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22008.550071] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22015.728538] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22022.787345] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22029.848451] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22038.855397] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22046.293623] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22053.402679] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22060.472963] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22069.706245] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22076.739052] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22083.878141] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22090.998685] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22100.467821] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[22181.931337] rt2860 0000:03:00.0: setting latency timer to 64
[22181.931737] 
[22181.931740] 
[22181.931743] === pAd = f89a8000, size = 486984 ===
[22181.931746] 
[22181.931753] <-- RTMPAllocAdapterBlock, Status=0
[22181.931759] pAd->CSRBaseAddress =0xf83e0000, csr_addr=0xf83e0000!
[22181.931790] ra0 (): not using net_device_ops yet
[22185.680588] RX DESC f6926000  size = 2048
[22185.681270] <-- RTMPAllocTxRxRingMemory, Status=0
[22185.686482] Key1Str is Invalid key length(0) or Type(0)
[22185.686532] Key2Str is Invalid key length(0) or Type(0)
[22185.686581] Key3Str is Invalid key length(0) or Type(0)
[22185.686636] Key4Str is Invalid key length(0) or Type(0)
[22185.687380] 1. Phy Mode = 5
[22185.687387] 2. Phy Mode = 5
[22185.712779] RTMPSetPhyMode: channel is out of range, use first channel=1 
[22185.720182] 3. Phy Mode = 9
[22185.724906] MCS Set = ff ff 00 00 01
[22185.726581] <==== rt28xx_init, Status=0
[22185.726656] 0x1300 = 00064300
[22187.185016] AsicSwitchChannel: TxPwer=6 
[22187.185023] AsicSwitchChannel: TxPwer2=6 
[22187.273016] AsicSwitchChannel: TxPwer=6 
[22187.273023] AsicSwitchChannel: TxPwer2=6 
[22187.361015] AsicSwitchChannel: TxPwer=6 
[22187.361022] AsicSwitchChannel: TxPwer2=6 
[22187.449021] AsicSwitchChannel: TxPwer=6 
[22187.449028] AsicSwitchChannel: TxPwer2=6 
[22187.537020] AsicSwitchChannel: TxPwer=6 
[22187.537027] AsicSwitchChannel: TxPwer2=6 
[22187.625020] AsicSwitchChannel: TxPwer=6 
[22187.625028] AsicSwitchChannel: TxPwer2=6 
[22187.713018] AsicSwitchChannel: TxPwer=6 
[22187.713025] AsicSwitchChannel: TxPwer2=6 
[22187.801018] AsicSwitchChannel: TxPwer=6 
[22187.801024] AsicSwitchChannel: TxPwer2=6 
[22187.889020] AsicSwitchChannel: TxPwer=6 
[22187.889028] AsicSwitchChannel: TxPwer2=6 
[22187.977020] AsicSwitchChannel: TxPwer=6 
[22187.977027] AsicSwitchChannel: TxPwer2=6 
[22188.065023] AsicSwitchChannel: TxPwer=6 
[22188.065032] AsicSwitchChannel: TxPwer2=6 
[22188.153019] AsicSwitchChannel: TxPwer=6 
[22188.153025] AsicSwitchChannel: TxPwer2=6 
[22188.241018] AsicSwitchChannel: TxPwer=6 
[22188.241025] AsicSwitchChannel: TxPwer2=6 
[22188.329016] AsicSwitchChannel: TxPwer=6 
[22188.329023] AsicSwitchChannel: TxPwer2=6 
[22188.417017] AsicSwitchChannel: TxPwer=6 
[22188.417024] AsicSwitchChannel: TxPwer2=6 
[22188.505014] AsicSwitchChannel: TxPwer=6 
[22188.505021] AsicSwitchChannel: TxPwer2=6 
[22188.593017] AsicSwitchChannel: TxPwer=6 
[22188.593023] AsicSwitchChannel: TxPwer2=6 
[22188.681101] AsicSwitchChannel: TxPwer=6 
[22188.681108] AsicSwitchChannel: TxPwer2=6 
[22188.769019] AsicSwitchChannel: TxPwer=6 
[22188.769026] AsicSwitchChannel: TxPwer2=6 
[22188.857015] AsicSwitchChannel: TxPwer=6 
[22188.857022] AsicSwitchChannel: TxPwer2=6 
[22188.945021] AsicSwitchChannel: TxPwer=6 
[22188.945028] AsicSwitchChannel: TxPwer2=6 
[22189.033019] AsicSwitchChannel: TxPwer=6 
[22189.033026] AsicSwitchChannel: TxPwer2=6 
[22189.121022] AsicSwitchChannel: TxPwer=6 
[22189.121029] AsicSwitchChannel: TxPwer2=6 
[22189.209016] AsicSwitchChannel: TxPwer=6 
[22189.209023] AsicSwitchChannel: TxPwer2=6 
[22189.297015] AsicSwitchChannel: TxPwer=6 
[22189.297021] AsicSwitchChannel: TxPwer2=6 
[22189.385025] AsicSwitchChannel: TxPwer=6 
[22189.385032] AsicSwitchChannel: TxPwer2=6 
[22196.509012] ra0: no IPv6 routers present
[24053.552189] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[26624.265999] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[26628.836063] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!

** Loaded modules:
Module                  Size  Used by
rt2860sta             536664  1 
nfsd                  204004  9 
lockd                  57840  1 nfsd
nfs_acl                 2640  1 nfsd
auth_rpcgss            31356  1 nfsd
sunrpc                163400  8 nfsd,lockd,nfs_acl,auth_rpcgss
i915                  148936  0 
drm                   137720  1 i915
i2c_algo_bit            4860  1 i915
ppdev                   6348  0 
lp                      8012  0 
parport                31148  2 ppdev,lp
sco                     8816  2 
bridge                 39836  0 
stp                     2112  1 bridge
bnep                   10796  2 
rfcomm                 30272  0 
l2cap                  18088  6 bnep,rfcomm
bluetooth              46960  6 sco,bnep,rfcomm,l2cap
appletalk              25920  20 
binfmt_misc             7088  1 
cpufreq_userspace       2736  0 
cpufreq_stats           3520  0 
cpufreq_conservative     6256  0 
cpufreq_powersave       1292  0 
uinput                  6456  1 
fuse                   47520  1 
ext2                   54020  1 
mbcache                 6924  1 ext2
loop                   13288  0 
snd_hda_codec_realtek   178564  1 
snd_hda_intel          22192  0 
snd_hda_codec          63596  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6120  1 snd_hda_codec
snd_pcm_oss            32232  0 
snd_mixer_oss          12368  1 snd_pcm_oss
snd_pcm                62416  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            5688  0 
snd_rawmidi            18596  1 snd_seq_midi
snd_seq_midi_event      6212  1 snd_seq_midi
snd_seq                42304  2 snd_seq_midi,snd_seq_midi_event
snd_timer              17460  2 snd_pcm,snd_seq
snd_seq_device          6136  3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801                8580  0 
snd                    49028  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core               20812  4 i915,drm,i2c_algo_bit,i2c_i801
pcspkr                  2104  0 
psmouse                37496  0 
serio_raw               4560  0 
evdev                   8028  8 
crc_itu_t               2148  0 
rng_core                3672  0 
asus_atk0110            6616  0 
processor              34496  0 
soundcore               6184  1 snd
snd_page_alloc          8116  2 snd_hda_intel,snd_pcm
button                  5060  0 
xfs                   432748  1 
exportfs                3760  2 nfsd,xfs
dm_mod                 49832  6 
usb_storage            48532  0 
sd_mod                 28676  3 
crc_t10dif              1632  1 sd_mod
ide_pci_generic         3632  0 
ide_core               87676  1 ide_pci_generic
ata_generic             4340  0 
ata_piix               20816  2 
uhci_hcd               19072  0 
libata                150808  2 ata_generic,ata_piix
intel_agp              23052  1 
video                  18044  1 i915
output                  2604  1 video
ehci_hcd               29616  0 
agpgart                30836  2 drm,intel_agp
scsi_mod              131572  3 usb_storage,sd_mod,libata
r8169                  27596  0 
mii                     4664  1 r8169
usbcore               125852  4 usb_storage,uhci_hcd,ehci_hcd
thermal                12580  0 
fan                     4044  0 
thermal_sys            13140  4 processor,video,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at ec80 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8331]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at feb38000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: 00000000bfe00000-00000000bfefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: fe700000-fe7fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fa700000-fe6fffff
	Prefetchable memory behind bridge: 00000000bbe00000-00000000bfdfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at ec00 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at feb3fc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 0400 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
	Subsystem: RaLink Device [1814:2790]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rt2860

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at dc00 [size=256]
	Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at bfef0000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at fe8c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169



-- System Information:
Debian Release: squeeze/sid
  APT prefers testing-proposed-updates
  APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.30-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.28     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.11-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.30-2-686 recommends:
ii  libc6-i686                    2.10.2-2   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.30-2-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.30              <none>     (no description available)

-- debconf information:
  linux-image-2.6.30-2-686/postinst/bootloader-test-error-2.6.30-2-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.30-2-686/preinst/failed-to-move-modules-2.6.30-2-686:
  linux-image-2.6.30-2-686/preinst/lilo-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/old-dir-initrd-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/initrd-2.6.30-2-686:
  linux-image-2.6.30-2-686/preinst/elilo-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/depmod-error-2.6.30-2-686: false
  linux-image-2.6.30-2-686/postinst/old-initrd-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/abort-install-2.6.30-2-686:
  linux-image-2.6.30-2-686/postinst/kimage-is-a-directory:
  linux-image-2.6.30-2-686/preinst/bootloader-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/bootloader-error-2.6.30-2-686:
  linux-image-2.6.30-2-686/prerm/removing-running-kernel-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/overwriting-modules-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/abort-overwrite-2.6.30-2-686:
  linux-image-2.6.30-2-686/postinst/depmod-error-initrd-2.6.30-2-686: false
  linux-image-2.6.30-2-686/postinst/create-kimage-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/prerm/would-invalidate-boot-loader-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.30-2-686/postinst/old-system-map-link-2.6.30-2-686: true



Reply to: