Bug#553441: firmware-ralink: Firmware not working with usb dongle rt2870sta
Package: firmware-ralink
Version: 0.21
Severity: important
I am trying to use a usb wifi-n device from linksys with chipset rt2870sta but with the firmware i am having this output in dmesg
[ 225.764045] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 225.923385] usb 2-6: New USB device found, idVendor=1737, idProduct=0071
[ 225.923394] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 225.923401] usb 2-6: Product: Dual-Band Wireless-N USB Network Adapter
[ 225.923407] usb 2-6: Manufacturer: Cisco-Linksys LLC
[ 225.923568] usb 2-6: configuration #1 chosen from 1 choice
[ 225.926259]
[ 225.926261]
[ 225.926263] === pAd = f9cfa000, size = 566744 ===
[ 225.926266]
[ 225.926271] <-- RTMPAllocAdapterBlock, Status=0
[ 230.650167] usb 2-6: firmware: requesting rt2870.bin
[ 230.945110] #
[ 230.977482] #
[ 231.009103] #
[ 231.040845] #
[ 231.073094] #
[ 231.105091] #
[ 231.136086] #
[ 231.168081] #
[ 231.200078] #
[ 231.232198] #
[ 231.237183] RTUSB_VendorRequest failed(-110),TxFlags=0x0, ReqType=OUT, Req=0x2, Index=0x400
[ 231.237189] Request Value=0x0001!
[ 231.238763] <-- RTMPAllocTxRxRingMemory, Status=0
[ 231.240443] -->RTUSBVenderReset
[ 231.240568] <--RTUSBVenderReset
[ 231.518173] --> Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[ 231.518181] 1. Phy Mode = 0
[ 231.518185] 2. Phy Mode = 0
[ 231.547410] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 231.557280] 3. Phy Mode = 0
[ 231.570029] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[ 231.583652] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[ 231.596400] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[ 231.609149] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[ 231.610898] MCS Set = 00 00 00 00 00
[ 231.632896] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[ 231.632907] <==== RTMPInitialize, Status=0
[ 231.634519] 0x1300 = 00073200
[ 234.238181] Bulk Out MLME Failed, Status=-2!
And the wifi device doesn't work
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (200, 'testing'), (100, 'unstable'), (50, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/3 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
firmware-ralink depends on no packages.
firmware-ralink recommends no packages.
Versions of packages firmware-ralink suggests:
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-image-2.6.30-2-686 [lin 2.6.30-8 Linux 2.6.30 image on PPro/Celeron
-- no debconf information
Reply to: