Your message dated Wed, 21 Oct 2009 16:37:15 -0700 with message-id <4ADF9B2B.4050604@gmail.com> and subject line Re: Bug#551579: Intel 5350 AGN (Echo Peak) refuses to associate with hardware accelerated encryption enabled has caused the Debian Bug report #551579, regarding Intel 5350 AGN (Echo Peak) refuses to associate with hardware accelerated encryption enabled to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 551579: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=551579 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Intel 5350 AGN (Echo Peak) refuses to associate with hardware accelerated encryption enabled
- From: Daniel Moerner <dmoerner@gmail.com>
- Date: Mon, 19 Oct 2009 00:52:45 -0700
- Message-id: <[🔎] 20091019075245.17468.12901.reportbug@skynet.pomona.edu>
Package: linux-image-2.6.30-2-amd64 Version: 2.6.30-8 Severity: important Hi, I'm getting the same symptoms as in: https://bugzilla.redhat.com/show_bug.cgi?id=468967 My Intel 5350 won't associate at all with some unencrypted networks, unless I add: alias wlan0 iwlagn options iwlagn swcrypto50=1 swcrypto=1 To an arbitrary file in /etc/modprobe.d. Is there a way to fix this problem in the driver? Daniel -- Package-specific info: ** Version: Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=/dev/mapper/vg-root ro quiet ** Not tainted ** Kernel log: [19945.704635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [19945.709370] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [19945.711797] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [19945.722685] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [19945.725119] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [19945.728622] ata2.00: configured for UDMA/33 [19945.734460] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [19945.734467] ata2: irq_stat 0x40000001 [19945.734481] ata2: hard resetting link [19945.797752] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c517 [19945.797760] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19945.797766] usb 1-5.3: Product: USB Receiver [19945.797771] usb 1-5.3: Manufacturer: Logitech [19945.797956] usb 1-5.3: configuration #1 chosen from 1 choice [19945.801468] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.0/input/input15 [19945.801654] logitech 0003:046D:C517.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-5.3/input0 [19945.806749] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor [19945.808587] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.1/input/input16 [19945.808918] logitech 0003:046D:C517.0004: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-5.3/input1 [19946.052233] usb 1-5.2: new high speed USB device using ehci_hcd and address 10 [19946.144734] usb 1-5.2: New USB device found, idVendor=03f0, idProduct=7711 [19946.144738] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19946.144741] usb 1-5.2: Product: Deskjet F4400 series [19946.144743] usb 1-5.2: Manufacturer: HP [19946.144745] usb 1-5.2: SerialNumber: CN96RBK5KW05C5 [19946.144857] usb 1-5.2: configuration #1 chosen from 1 choice [19946.148353] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7711 [19946.182608] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [19946.183373] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [19946.448529] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [19946.452483] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [19946.453317] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [19946.459938] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [19946.460771] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [19946.462666] ata2.00: configured for UDMA/33 [19946.463771] ata2: EH complete [19947.292325] wlan0: deauthenticating by local choice (reason=3) [19947.396138] Registered led device: iwl-phy0::radio [19947.396185] Registered led device: iwl-phy0::assoc [19947.396228] Registered led device: iwl-phy0::RX [19947.396271] Registered led device: iwl-phy0::TX [19947.446323] ADDRCONF(NETDEV_UP): wlan0: link is not ready [19947.674278] Registered led device: iwl-phy0::radio [19947.674302] Registered led device: iwl-phy0::assoc [19947.674324] Registered led device: iwl-phy0::RX [19947.674347] Registered led device: iwl-phy0::TX [19947.836961] ADDRCONF(NETDEV_UP): wlan0: link is not ready [19947.957056] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [19948.012665] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [19948.014254] ADDRCONF(NETDEV_UP): eth0: link is not ready [19950.492916] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [19950.494344] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [19955.128605] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1 [19955.328083] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 2 [19955.528099] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 3 [19955.728067] wlan0: direct probe to AP 00:1a:1e:91:51:41 timed out [19955.776774] usb 1-5.4: new high speed USB device using ehci_hcd and address 11 [19955.869630] usb 1-5.4: New USB device found, idVendor=4971, idProduct=ce12 [19955.869637] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19955.869644] usb 1-5.4: Product: [19955.869648] usb 1-5.4: Manufacturer: FV-U35 [19955.869653] usb 1-5.4: SerialNumber: STN605MH3WSV2K [19955.869852] usb 1-5.4: configuration #1 chosen from 1 choice [19955.871670] scsi6 : SCSI emulation for USB Mass Storage devices [19955.871920] usb-storage: device found at 11 [19955.871924] usb-storage: waiting for device to settle before scanning [19960.146953] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1 [19960.148090] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1 [19960.348096] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 2 [19960.548079] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 3 [19960.748066] wlan0: direct probe to AP 00:1a:1e:91:51:41 timed out [19960.868484] usb-storage: device scan complete [19960.869191] scsi 6:0:0:0: Direct-Access FV-U35 1.04 PQ: 0 ANSI: 4 [19960.870279] sd 6:0:0:0: Attached scsi generic sg2 type 0 [19960.872646] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [19960.873638] sd 6:0:0:0: [sdb] Write Protect is off [19960.873645] sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00 [19960.873651] sd 6:0:0:0: [sdb] Assuming drive cache: write through [19960.875098] sd 6:0:0:0: [sdb] Assuming drive cache: write through [19960.875105] sdb: sdb1 [19960.888642] sd 6:0:0:0: [sdb] Attached SCSI disk [19971.822527] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 1 [19972.020094] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 2 [19972.220139] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 3 [19972.420160] wlan0: direct probe to AP 00:1a:1e:91:2b:21 timed out [19976.750630] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 1 [19976.948062] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 2 [19977.148555] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 3 [19977.348577] wlan0: direct probe to AP 00:1a:1e:91:51:81 timed out [19984.004849] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 1 [19984.207865] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 2 [19984.404069] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 3 [19984.604062] wlan0: direct probe to AP 00:1a:1e:91:2b:21 timed out [19992.196443] wlan0: authenticate with AP 00:1a:1e:91:51:31 [19992.197742] wlan0: authenticated [19992.197748] wlan0: associate with AP 00:1a:1e:91:51:31 [19992.201177] wlan0: RX AssocResp from 00:1a:1e:91:51:31 (capab=0x501 status=0 aid=1) [19992.201185] wlan0: associated [19992.204530] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [20002.260551] wlan0: no IPv6 routers present ** Loaded modules: Module Size Used by cpufreq_stats 4660 0 iwlagn 83236 0 iwlcore 106896 1 iwlagn mac80211 161424 2 iwlagn,iwlcore cfg80211 65464 3 iwlagn,iwlcore,mac80211 isofs 31160 0 nls_utf8 2000 0 nls_cp437 6928 0 vfat 10496 0 fat 48328 1 vfat nls_base 8740 5 isofs,nls_utf8,nls_cp437,vfat,fat ext3 122848 0 jbd 48152 1 ext3 i915 168504 1 drm 172672 2 i915 i2c_algo_bit 5988 1 i915 sco 10980 2 bridge 48240 0 stp 2868 1 bridge bnep 13792 2 rfcomm 35984 4 l2cap 21104 16 bnep,rfcomm ppdev 7784 0 lp 10612 0 parport 38224 2 ppdev,lp ext2 62816 1 acpi_cpufreq 8912 0 loop 15980 0 usb_storage 61600 0 arc4 2048 2 ecb 3072 2 i2400m_usb 28608 0 usblp 13088 0 joydev 11072 0 i2400m 81320 1 i2400m_usb hid_logitech 8224 0 ff_memless 5368 1 hid_logitech usbhid 37328 1 hid_logitech btusb 12756 2 hid 41376 2 hid_logitech,usbhid bluetooth 55108 9 sco,bnep,rfcomm,l2cap,btusb wimax 26916 2 i2400m_usb,i2400m thinkpad_acpi 65404 0 rfkill 12116 5 iwlcore,wimax,thinkpad_acpi snd_hda_codec_conexant 22608 1 evdev 10448 19 serio_raw 5844 0 i2c_i801 10464 0 i2c_core 25456 4 i915,drm,i2c_algo_bit,i2c_i801 nvram 8092 1 thinkpad_acpi ac 3872 0 snd_hda_intel 26680 4 led_class 5048 2 iwlcore,thinkpad_acpi snd_hda_codec 75248 2 snd_hda_codec_conexant,snd_hda_intel psmouse 42172 0 button 6512 0 battery 7840 0 processor 40208 3 acpi_cpufreq wmi 7488 0 snd_pcsp 10588 0 snd_hwdep 8152 1 snd_hda_codec snd_pcm 78472 4 snd_hda_intel,snd_hda_codec,snd_pcsp snd_timer 21824 2 snd_pcm snd 63912 13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm,snd_timer soundcore 7984 1 snd snd_page_alloc 9984 2 snd_hda_intel,snd_pcm ext4 216240 1 mbcache 8804 3 ext3,ext2,ext4 jbd2 58816 1 ext4 crc16 2272 1 ext4 dm_mod 59384 8 sg 24040 0 sd_mod 33736 3 crc_t10dif 2096 1 sd_mod sr_mod 15908 0 cdrom 34344 1 sr_mod uhci_hcd 22208 0 ata_generic 5924 0 ahci 36480 2 libata 175660 2 ata_generic,ahci e1000e 111680 0 scsi_mod 158768 5 usb_storage,sg,sd_mod,sr_mod,libata ide_pci_generic 4964 0 video 21884 1 i915 output 3472 1 video ehci_hcd 33996 0 ide_core 104976 1 ide_pci_generic intel_agp 28976 1 thermal 15936 0 fan 5240 0 thermal_sys 16448 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Lenovo Device [17aa:20e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:20e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) Subsystem: Lenovo Device [17aa:20e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07) Subsystem: Lenovo Device [17aa:20e6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO]) Subsystem: Lenovo Device [17aa:20ea] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 0: I/O ports at 1828 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1820 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 1810 [size=16] Capabilities: <access denied> 00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550]) Subsystem: Lenovo Device [17aa:20ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1830 [size=8] Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1840 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:20f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Lenovo Device [17aa:20f2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f2500000-f25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 18c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 18e0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1c00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:20f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: Lenovo Device [17aa:20f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:20f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 28 Region 0: I/O ports at 1c48 [size=8] Region 1: I/O ports at 183c [size=4] Region 2: I/O ports at 1c40 [size=8] Region 3: I/O ports at 1838 [size=4] Region 4: I/O ports at 1c20 [size=32] Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Lenovo Device [17aa:20f9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c60 [size=32] Kernel driver in use: i801_smbus 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] Network Connection [8086:423b] Subsystem: Intel Corporation Device [8086:1011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.11-1 tools for managing Linux kernel mo linux-image-2.6.30-2-amd64 recommends no packages. Versions of packages linux-image-2.6.30-2-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.30 <none> (no description available) -- debconf information: linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
--- End Message ---
--- Begin Message ---
- To: maximilian attems <max@stro.at>
- Cc: 551579-done@bugs.debian.org, Ben Hutchings <ben@decadent.org.uk>
- Subject: Re: Bug#551579: Intel 5350 AGN (Echo Peak) refuses to associate with hardware accelerated encryption enabled
- From: Daniel Moerner <dmoerner@gmail.com>
- Date: Wed, 21 Oct 2009 16:37:15 -0700
- Message-id: <4ADF9B2B.4050604@gmail.com>
- In-reply-to: <[🔎] 20091021090438.GJ25768@baikonur.stro.at>
- References: <[🔎] 20091019075245.17468.12901.reportbug@skynet.pomona.edu> <[🔎] 1256090995.3916.88.camel@localhost> <[🔎] 4ADE7597.20602@gmail.com> <[🔎] 20091021090438.GJ25768@baikonur.stro.at>
On 10/21/2009 02:04 AM, maximilian attems wrote: > On Tue, Oct 20, 2009 at 07:44:39PM -0700, Daniel Moerner wrote: >> I have firmware-iwlwifi version 0.18 installed. The above fix actually >> doesn't work for me reliably. I still can't associate with a lot of >> unprotected wireless networks. This is what dmesg shows me: >> >> [ 239.024909] ADDRCONF(NETDEV_UP): wlan0: link is not ready >> >> [ 239.055047] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1 >> >> [ 239.062981] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 1 >> >> [ 239.260567] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 2 >> >> [ 239.460568] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 3 >> >> [ 239.660101] wlan0: direct probe to AP 00:1a:1e:91:51:21 timed out >> >> wlan0 never becomes "ready". >> >> This isn't a signal strength problem, I still get this when I'm next to >> the router. >> >> Is there anything I can do to better diagnose the problem? This problem >> wasn't around on WPA protected networks that I've connected to before. > > do you use wpa_supplicant, if not please try? > I was trying both wicd and "iwconfig wlan0 essid <ssid> && dhclient" with no luck. With wpasupplicant I can get it to work (without setting the options on the module to disable hardware accelerated encryption) root@skynet:~ # cat wpa.conf network={ ssid="Pomona" key_mgmt=NONE } It still takes a long time to get the device up, as seen here: [66674.339838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [66819.236756] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 1 [66819.436063] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 2 [66819.636575] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 3 [66819.836086] wlan0: direct probe to AP 00:1a:1e:91:50:61 timed out [66827.433378] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 1 [66827.434563] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 1 [66827.633116] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 2 [66827.832077] wlan0: direct probe to AP 00:1a:1e:91:50:61 try 3 [66828.032575] wlan0: direct probe to AP 00:1a:1e:91:50:61 timed out [66839.189509] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 1 [66839.388578] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 2 [66839.588566] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 3 [66839.788594] wlan0: direct probe to AP 00:1a:1e:91:51:21 timed out [66844.190623] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 1 [66844.199154] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 1 [66844.396569] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 2 [66844.596576] wlan0: direct probe to AP 00:1a:1e:91:51:21 try 3 [66844.796617] wlan0: direct probe to AP 00:1a:1e:91:51:21 timed out [66855.587247] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 1 [66855.784110] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 2 [66855.984066] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 3 [66856.184119] wlan0: direct probe to AP 00:1a:1e:91:51:81 timed out [66860.611309] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 1 [66860.619411] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 1 [66860.816326] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 2 [66861.016185] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 3 [66861.216066] wlan0: direct probe to AP 00:1a:1e:91:51:81 timed out [66872.175125] wlan0: authenticate with AP 00:1a:1e:91:50:71 [66872.180189] wlan0: authenticated [66872.180193] wlan0: associate with AP 00:1a:1e:91:50:71 [66872.184567] wlan0: RX AssocResp from 00:1a:1e:91:50:71 (capab=0x501 status=0 aid=1) [66872.184570] wlan0: associated [66872.186725] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [66872.323324] cfg80211: Calling CRDA for country: US [66882.284521] wlan0: no IPv6 routers present [66887.352086] wlan0: no probe response from AP 00:1a:1e:91:50:71 - disassociating [66901.452785] wlan0: deauthenticated (Reason: 6) [66901.459974] wlan0: authenticate with AP 00:1a:1e:91:51:31 [66901.656079] wlan0: authenticate with AP 00:1a:1e:91:51:31 [66901.856087] wlan0: authenticate with AP 00:1a:1e:91:51:31 [66901.857690] wlan0: authenticated [66901.857697] wlan0: associate with AP 00:1a:1e:91:51:31 [66901.860020] wlan0: RX ReassocResp from 00:1a:1e:91:51:31 (capab=0x501 status=0 aid=3) [66901.860027] wlan0: associated I'll close the bug since there is a way to get it working. I guess a diversity of tools is a plus in times like these! Thanks, DanielAttachment: signature.asc
Description: OpenPGP digital signature
--- End Message ---