Bug#551579: Intel 5350 AGN (Echo Peak) refuses to associate with hardware accelerated encryption enabled
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8
Severity: important
Hi,
I'm getting the same symptoms as in:
https://bugzilla.redhat.com/show_bug.cgi?id=468967
My Intel 5350 won't associate at all with some unencrypted networks,
unless I add:
alias wlan0 iwlagn
options iwlagn swcrypto50=1 swcrypto=1
To an arbitrary file in /etc/modprobe.d. Is there a way to fix this
problem in the driver?
Daniel
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=/dev/mapper/vg-root ro quiet
** Not tainted
** Kernel log:
[19945.704635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[19945.709370] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[19945.711797] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[19945.722685] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[19945.725119] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[19945.728622] ata2.00: configured for UDMA/33
[19945.734460] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[19945.734467] ata2: irq_stat 0x40000001
[19945.734481] ata2: hard resetting link
[19945.797752] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c517
[19945.797760] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[19945.797766] usb 1-5.3: Product: USB Receiver
[19945.797771] usb 1-5.3: Manufacturer: Logitech
[19945.797956] usb 1-5.3: configuration #1 chosen from 1 choice
[19945.801468] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.0/input/input15
[19945.801654] logitech 0003:046D:C517.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-5.3/input0
[19945.806749] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
[19945.808587] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.1/input/input16
[19945.808918] logitech 0003:046D:C517.0004: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-5.3/input1
[19946.052233] usb 1-5.2: new high speed USB device using ehci_hcd and address 10
[19946.144734] usb 1-5.2: New USB device found, idVendor=03f0, idProduct=7711
[19946.144738] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19946.144741] usb 1-5.2: Product: Deskjet F4400 series
[19946.144743] usb 1-5.2: Manufacturer: HP
[19946.144745] usb 1-5.2: SerialNumber: CN96RBK5KW05C5
[19946.144857] usb 1-5.2: configuration #1 chosen from 1 choice
[19946.148353] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7711
[19946.182608] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[19946.183373] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[19946.448529] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[19946.452483] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[19946.453317] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[19946.459938] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[19946.460771] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[19946.462666] ata2.00: configured for UDMA/33
[19946.463771] ata2: EH complete
[19947.292325] wlan0: deauthenticating by local choice (reason=3)
[19947.396138] Registered led device: iwl-phy0::radio
[19947.396185] Registered led device: iwl-phy0::assoc
[19947.396228] Registered led device: iwl-phy0::RX
[19947.396271] Registered led device: iwl-phy0::TX
[19947.446323] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19947.674278] Registered led device: iwl-phy0::radio
[19947.674302] Registered led device: iwl-phy0::assoc
[19947.674324] Registered led device: iwl-phy0::RX
[19947.674347] Registered led device: iwl-phy0::TX
[19947.836961] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19947.957056] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[19948.012665] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[19948.014254] ADDRCONF(NETDEV_UP): eth0: link is not ready
[19950.492916] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[19950.494344] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[19955.128605] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1
[19955.328083] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 2
[19955.528099] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 3
[19955.728067] wlan0: direct probe to AP 00:1a:1e:91:51:41 timed out
[19955.776774] usb 1-5.4: new high speed USB device using ehci_hcd and address 11
[19955.869630] usb 1-5.4: New USB device found, idVendor=4971, idProduct=ce12
[19955.869637] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19955.869644] usb 1-5.4: Product:
[19955.869648] usb 1-5.4: Manufacturer: FV-U35
[19955.869653] usb 1-5.4: SerialNumber: STN605MH3WSV2K
[19955.869852] usb 1-5.4: configuration #1 chosen from 1 choice
[19955.871670] scsi6 : SCSI emulation for USB Mass Storage devices
[19955.871920] usb-storage: device found at 11
[19955.871924] usb-storage: waiting for device to settle before scanning
[19960.146953] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1
[19960.148090] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 1
[19960.348096] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 2
[19960.548079] wlan0: direct probe to AP 00:1a:1e:91:51:41 try 3
[19960.748066] wlan0: direct probe to AP 00:1a:1e:91:51:41 timed out
[19960.868484] usb-storage: device scan complete
[19960.869191] scsi 6:0:0:0: Direct-Access FV-U35 1.04 PQ: 0 ANSI: 4
[19960.870279] sd 6:0:0:0: Attached scsi generic sg2 type 0
[19960.872646] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[19960.873638] sd 6:0:0:0: [sdb] Write Protect is off
[19960.873645] sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00
[19960.873651] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[19960.875098] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[19960.875105] sdb: sdb1
[19960.888642] sd 6:0:0:0: [sdb] Attached SCSI disk
[19971.822527] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 1
[19972.020094] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 2
[19972.220139] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 3
[19972.420160] wlan0: direct probe to AP 00:1a:1e:91:2b:21 timed out
[19976.750630] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 1
[19976.948062] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 2
[19977.148555] wlan0: direct probe to AP 00:1a:1e:91:51:81 try 3
[19977.348577] wlan0: direct probe to AP 00:1a:1e:91:51:81 timed out
[19984.004849] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 1
[19984.207865] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 2
[19984.404069] wlan0: direct probe to AP 00:1a:1e:91:2b:21 try 3
[19984.604062] wlan0: direct probe to AP 00:1a:1e:91:2b:21 timed out
[19992.196443] wlan0: authenticate with AP 00:1a:1e:91:51:31
[19992.197742] wlan0: authenticated
[19992.197748] wlan0: associate with AP 00:1a:1e:91:51:31
[19992.201177] wlan0: RX AssocResp from 00:1a:1e:91:51:31 (capab=0x501 status=0 aid=1)
[19992.201185] wlan0: associated
[19992.204530] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[20002.260551] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
cpufreq_stats 4660 0
iwlagn 83236 0
iwlcore 106896 1 iwlagn
mac80211 161424 2 iwlagn,iwlcore
cfg80211 65464 3 iwlagn,iwlcore,mac80211
isofs 31160 0
nls_utf8 2000 0
nls_cp437 6928 0
vfat 10496 0
fat 48328 1 vfat
nls_base 8740 5 isofs,nls_utf8,nls_cp437,vfat,fat
ext3 122848 0
jbd 48152 1 ext3
i915 168504 1
drm 172672 2 i915
i2c_algo_bit 5988 1 i915
sco 10980 2
bridge 48240 0
stp 2868 1 bridge
bnep 13792 2
rfcomm 35984 4
l2cap 21104 16 bnep,rfcomm
ppdev 7784 0
lp 10612 0
parport 38224 2 ppdev,lp
ext2 62816 1
acpi_cpufreq 8912 0
loop 15980 0
usb_storage 61600 0
arc4 2048 2
ecb 3072 2
i2400m_usb 28608 0
usblp 13088 0
joydev 11072 0
i2400m 81320 1 i2400m_usb
hid_logitech 8224 0
ff_memless 5368 1 hid_logitech
usbhid 37328 1 hid_logitech
btusb 12756 2
hid 41376 2 hid_logitech,usbhid
bluetooth 55108 9 sco,bnep,rfcomm,l2cap,btusb
wimax 26916 2 i2400m_usb,i2400m
thinkpad_acpi 65404 0
rfkill 12116 5 iwlcore,wimax,thinkpad_acpi
snd_hda_codec_conexant 22608 1
evdev 10448 19
serio_raw 5844 0
i2c_i801 10464 0
i2c_core 25456 4 i915,drm,i2c_algo_bit,i2c_i801
nvram 8092 1 thinkpad_acpi
ac 3872 0
snd_hda_intel 26680 4
led_class 5048 2 iwlcore,thinkpad_acpi
snd_hda_codec 75248 2 snd_hda_codec_conexant,snd_hda_intel
psmouse 42172 0
button 6512 0
battery 7840 0
processor 40208 3 acpi_cpufreq
wmi 7488 0
snd_pcsp 10588 0
snd_hwdep 8152 1 snd_hda_codec
snd_pcm 78472 4 snd_hda_intel,snd_hda_codec,snd_pcsp
snd_timer 21824 2 snd_pcm
snd 63912 13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm,snd_timer
soundcore 7984 1 snd
snd_page_alloc 9984 2 snd_hda_intel,snd_pcm
ext4 216240 1
mbcache 8804 3 ext3,ext2,ext4
jbd2 58816 1 ext4
crc16 2272 1 ext4
dm_mod 59384 8
sg 24040 0
sd_mod 33736 3
crc_t10dif 2096 1 sd_mod
sr_mod 15908 0
cdrom 34344 1 sr_mod
uhci_hcd 22208 0
ata_generic 5924 0
ahci 36480 2
libata 175660 2 ata_generic,ahci
e1000e 111680 0
scsi_mod 158768 5 usb_storage,sg,sd_mod,sr_mod,libata
ide_pci_generic 4964 0
video 21884 1 i915
output 3472 1 video
ehci_hcd 33996 0
ide_core 104976 1 ide_pci_generic
intel_agp 28976 1
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Lenovo Device [17aa:20e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:20e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Lenovo Device [17aa:20e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Lenovo Device [17aa:20e6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Device [17aa:20ea]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 1828 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1820 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1810 [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:20ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1830 [size=8]
Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Lenovo Device [17aa:20ee]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:20f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2500000-f25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Lenovo Device [17aa:20f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:20f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:20f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] Network Connection [8086:423b]
Subsystem: Intel Corporation Device [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
Reply to: