[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#550190: marked as done (linux-image-2.6.31-trunk-amd64: SCSI warnings/errors with LSI SAS1064E controller)



Your message dated Sat, 10 Oct 2009 14:56:19 +1100
with message-id <20091010035619.GA22148@jdc.jasonjgw.net>
and subject line Re: linux-image-2.6.31-trunk-amd64: SCSI warnings/errors with LSI SAS1064E controller
has caused the Debian Bug report #550190,
regarding linux-image-2.6.31-trunk-amd64: SCSI warnings/errors with LSI SAS1064E controller
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
550190: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=550190
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.31-1~experimental.1
Severity: normal


After upgrading to 2.6.31 from 2.6.30, I get the following, quite frequently,
in my log.

Oct  8 19:15:03 jdc kernel: [34919.532016] sd 6:1:0:0: strange observation,
the
queue depth is (64) meanwhile fw queue depth (65)
Oct  8 19:15:37 jdc kernel: [34953.528772] sd 6:1:0:0: strange observation,
the queue depth is (64) meanwhile fw queue depth (65)
Oct  8 19:15:37 jdc kernel: [34953.540511] sd 6:1:0:0: Queue depth not changed
yet

I haven't found any data corruption, at least not so far.

This is my personal workstation, not a test machine, so I wish to avoid file
system/data corruption where possible.

There are two SAS disks which the previous owner of the machine configured for
striping, 73Gb each.

-- Package-specific info:
** Version:
Linux version 2.6.31-trunk-amd64 (Debian 2.6.31-1~experimental.1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Sun Oct 4 20:37:35 UTC 2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.31-trunk-amd64 root=UUID=7e6b3589-6e9d-49d9-845e-80bc54b055cb ro quiet

** Not tainted

** Kernel log:
[   45.521664] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   45.521667] usb 1-7: Product: hp LaserJet 2430
[   45.521670] usb 1-7: Manufacturer: Hewlett-Packard
[   45.521672] usb 1-7: SerialNumber: CNBG48D047
[   45.521787] usb 1-7: configuration #1 chosen from 1 choice
[   45.657162] usblp0: USB Bidirectional printer dev 8 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2A17
[   45.657186] usbcore: registered new interface driver usblp
[  621.417640] mtrr: no MTRR for c0000000,10000000 found
[  628.658310] usb 1-7: USB disconnect, address 8
[  628.658468] usblp0: removed
[ 1327.880446] sd 6:1:0:0: Queue depth not changed yet
[ 1352.588020] sd 6:1:0:0: Queue depth not changed yet
[ 1363.672517] sd 6:1:0:0: Queue depth not changed yet
[ 1370.528250] sd 6:1:0:0: Queue depth not changed yet
[ 1370.540010] sd 6:1:0:0: Queue depth not changed yet
[ 1495.328613] sd 6:1:0:0: Queue depth not changed yet
[ 1495.364828] sd 6:1:0:0: Queue depth not changed yet
[ 2958.072271] sd 6:1:0:0: Queue depth not changed yet
[ 2959.224018] sd 6:1:0:0: Queue depth not changed yet
[ 2965.340273] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[ 2968.960515] sd 6:1:0:0: Queue depth not changed yet
[ 2969.284769] sd 6:1:0:0: Queue depth not changed yet
[ 2969.292508] sd 6:1:0:0: Queue depth not changed yet
[ 2975.960018] sd 6:1:0:0: Queue depth not changed yet
[ 2976.312624] sd 6:1:0:0: Queue depth not changed yet
[ 2981.164517] sd 6:1:0:0: Queue depth not changed yet
[ 2981.628516] sd 6:1:0:0: Queue depth not changed yet
[ 2990.772520] sd 6:1:0:0: Queue depth not changed yet
[ 2991.048514] sd 6:1:0:0: Queue depth not changed yet
[ 2991.060271] sd 6:1:0:0: Queue depth not changed yet
[ 3003.706760] udev: starting version 146
[ 3005.516770] sd 6:1:0:0: Queue depth not changed yet
[ 3007.452139] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[ 3007.456022] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[ 3025.212023] sd 6:1:0:0: Queue depth not changed yet
[ 3033.072024] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[ 3033.072030] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[ 3060.240018] sd 6:1:0:0: Queue depth not changed yet
[ 3060.244508] sd 6:1:0:0: Queue depth not changed yet
[ 3195.368271] sd 6:1:0:0: Queue depth not changed yet
[ 3195.396011] sd 6:1:0:0: Queue depth not changed yet
[ 6014.440268] sd 6:1:0:0: Queue depth not changed yet
[ 6014.456515] sd 6:1:0:0: Queue depth not changed yet
[10059.184025] usb 1-7: new high speed USB device using ehci_hcd and address 9
[10059.317685] usb 1-7: New USB device found, idVendor=03f0, idProduct=2a17
[10059.317689] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10059.317692] usb 1-7: Product: hp LaserJet 2430
[10059.317694] usb 1-7: Manufacturer: Hewlett-Packard
[10059.317696] usb 1-7: SerialNumber: CNBG48D047
[10059.317810] usb 1-7: configuration #1 chosen from 1 choice
[10059.446896] usblp0: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2A17
[10168.489751] mtrr: no MTRR for c0000000,10000000 found
[10181.958051] usb 1-7: USB disconnect, address 9
[10181.958211] usblp0: removed
[13240.480017] sd 6:1:0:0: Queue depth not changed yet
[18305.017304] mtrr: no MTRR for c0000000,10000000 found
[20461.744765] usb 1-7: new high speed USB device using ehci_hcd and address 10
[20461.877117] usb 1-7: New USB device found, idVendor=03f0, idProduct=2a17
[20461.877121] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20461.877124] usb 1-7: Product: hp LaserJet 2430
[20461.877126] usb 1-7: Manufacturer: Hewlett-Packard
[20461.877129] usb 1-7: SerialNumber: CNBG48D047
[20461.877244] usb 1-7: configuration #1 chosen from 1 choice
[20462.000439] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2A17
[20616.634368] usb 1-7: USB disconnect, address 10
[20616.634542] usblp0: removed
[23469.560835] sd 6:1:0:0: Queue depth not changed yet
[24606.520770] usb 1-7: new high speed USB device using ehci_hcd and address 11
[24606.652900] usb 1-7: New USB device found, idVendor=03f0, idProduct=2a17
[24606.652905] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24606.652908] usb 1-7: Product: hp LaserJet 2430
[24606.652910] usb 1-7: Manufacturer: Hewlett-Packard
[24606.652912] usb 1-7: SerialNumber: CNBG48D047
[24606.653028] usb 1-7: configuration #1 chosen from 1 choice
[24606.788131] usblp0: USB Bidirectional printer dev 11 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2A17
[24776.487041] mtrr: no MTRR for c0000000,10000000 found
[24784.845610] usb 1-7: USB disconnect, address 11
[24784.845783] usblp0: removed
[26270.508018] sd 6:1:0:0: Queue depth not changed yet
[27291.420016] usb 1-7: new high speed USB device using ehci_hcd and address 12
[27291.553295] usb 1-7: New USB device found, idVendor=03f0, idProduct=2a17
[27291.553300] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27291.553303] usb 1-7: Product: hp LaserJet 2430
[27291.553305] usb 1-7: Manufacturer: Hewlett-Packard
[27291.553307] usb 1-7: SerialNumber: CNBG48D047
[27291.553424] usb 1-7: configuration #1 chosen from 1 choice
[27291.686369] usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2A17
[27391.561689] mtrr: no MTRR for c0000000,10000000 found
[27398.154945] usb 1-7: USB disconnect, address 12
[27398.155116] usblp0: removed
[27890.520520] sd 6:1:0:0: Queue depth not changed yet
[27924.388273] sd 6:1:0:0: Queue depth not changed yet
[27924.404264] sd 6:1:0:0: Queue depth not changed yet
[34774.504018] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[34774.508057] sd 6:1:0:0: Queue depth not changed yet
[34774.868365] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[34809.416523] sd 6:1:0:0: Queue depth not changed yet
[34919.532016] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[34953.528772] sd 6:1:0:0: strange observation, the queue depth is (64) meanwhile fw queue depth (65)
[34953.540511] sd 6:1:0:0: Queue depth not changed yet

** Loaded modules:
Module                  Size  Used by
usblp                  14320  0 
binfmt_misc             9948  1 
ppdev                   7720  0 
lp                     11492  0 
nfsd                  295184  9 
lockd                  77076  1 nfsd
nfs_acl                 3536  1 nfsd
auth_rpcgss            45056  1 nfsd
sunrpc                220488  8 nfsd,lockd,nfs_acl,auth_rpcgss
acpi_cpufreq            9520  0 
cpufreq_userspace       3972  0 
cpufreq_powersave       1952  0 
cpufreq_conservative     8624  0 
cpufreq_stats           5092  0 
ipt_MASQUERADE          3184  1 
iptable_nat             7008  1 
nf_nat                 21812  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      16824  3 iptable_nat,nf_nat
nf_conntrack           78704  4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4          2496  1 nf_conntrack_ipv4
iptable_filter          4128  0 
ip_tables              18640  2 iptable_nat,iptable_filter
x_tables               25512  3 ipt_MASQUERADE,iptable_nat,ip_tables
fuse                   68320  1 
dm_snapshot            25852  0 
dm_mirror              15992  0 
dm_region_hash         13872  1 dm_mirror
dm_log                 11348  2 dm_mirror,dm_region_hash
dm_mod                 78440  3 dm_snapshot,dm_mirror,dm_log
snd_pcsp               12092  0 
tun                    16560  2 
kvm_intel              51048  0 
kvm                   179624  1 kvm_intel
coretemp                7152  0 
loop                   17436  0 
snd_hda_codec_realtek   271892  1 
snd_hda_intel          29128  0 
snd_hda_codec          83920  2 snd_hda_codec_realtek,snd_hda_intel
snd_rme9652            27328  0 
snd_usb_audio          96432  0 
snd_pcm_oss            40832  0 
snd_usb_lib            19024  1 snd_usb_audio
snd_mixer_oss          16528  1 snd_pcm_oss
snd_hwdep               9288  2 snd_hda_codec,snd_usb_audio
snd_pcm                89240  6 snd_pcsp,snd_hda_intel,snd_hda_codec,snd_rme9652,snd_usb_audio,snd_pcm_oss
snd_seq_midi            7536  0 
rng_core                5272  0 
i5k_amb                 7416  0 
serio_raw               6564  0 
snd_rawmidi            25424  2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event      8752  1 snd_seq_midi
psmouse                46220  0 
i5000_edac             10384  0 
wmi                     8144  0 
evdev                  11504  7 
edac_core              50444  3 i5000_edac
shpchp                 35356  0 
pci_hotplug            30880  1 shpchp
parport_pc             28824  1 
snd_seq                58672  2 snd_seq_midi,snd_seq_midi_event
button                  7072  0 
parport                41184  3 ppdev,lp,parport_pc
snd_timer              23856  2 snd_pcm,snd_seq
snd_seq_device          8324  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    71640  14 snd_pcsp,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_rme9652,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               8816  1 snd
processor              43244  1 acpi_cpufreq
snd_page_alloc         10848  3 snd_hda_intel,snd_rme9652,snd_pcm
xfs                   518656  1 
exportfs                5024  2 nfsd,xfs
sd_mod                 37672  2 
crc_t10dif              2208  1 sd_mod
ide_cd_mod             30376  0 
cdrom                  36184  1 ide_cd_mod
ide_pci_generic         5156  0 
ata_generic             6132  0 
usbhid                 41312  2 
hid                    43872  1 usbhid
tg3                   107700  0 
mptsas                 38288  1 
mptscsih               26976  1 mptsas
mptbase                64164  2 mptsas,mptscsih
libphy                 28400  1 tg3
scsi_transport_sas     34064  1 mptsas
ahci                   41552  0 
uhci_hcd               24128  0 
libata                191004  2 ata_generic,ahci
scsi_mod              173408  5 sd_mod,mptsas,mptscsih,scsi_transport_sas,libata
floppy                 60232  0 
piix                    7768  0 
ide_core              118032  3 ide_cd_mod,ide_pci_generic,piix
ehci_hcd               37856  0 
thermal                17376  0 
fan                     5768  0 
thermal_sys            17936  3 processor,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000X Chipset Memory Controller Hub [8086:25c0] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Capabilities: <access denied>

00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=10, subordinate=20, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d5200000-d76fffff
	Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=60, subordinate=60, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:04.0 PCI bridge [0604]: Intel Corporation 5000X Chipset PCI Express x16 Port 4-7 [8086:25fa] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=40, subordinate=40, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: d1000000-d31fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=fe, subordinate=fe, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 [8086:25e6] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=fd, subordinate=fd, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=fc, subordinate=fc, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: i5000_edac

00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 12)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1b.0 Audio device [0403]: Intel Corporation 631xESB/632xESB High Definition Audio Controller [8086:269a] (rev 09)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=80, subordinate=80, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 3000 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 3020 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 4: I/O ports at 3060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: d4000000-d51fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 30c0 [size=16]
	Kernel driver in use: PIIX_IDE

00:1f.2 RAID bus controller [0104]: Intel Corporation 631xESB/632xESB SATA RAID Controller [8086:2682] (rev 09)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 30e0 [size=8]
	Region 1: I/O ports at 30f8 [size=4]
	Region 2: I/O ports at 30e8 [size=8]
	Region 3: I/O ports at 30fc [size=4]
	Region 4: I/O ports at 3080 [size=32]
	Region 5: Memory at d0404400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

01:04.0 Multimedia audio controller [0401]: Xilinx Corporation RME Digi9652 (Hammerfall) [10ee:3fc4] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
	Kernel driver in use: RME Digi9652 (Hammerfall)

10:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=10, secondary=1e, subordinate=20, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d5200000-d59fffff
	Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

10:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Region 0: Memory at d7601000 (64-bit, non-prefetchable) [size=4K]
	Bus: primary=10, secondary=11, subordinate=1d, sec-latency=32
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

1e:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=1e, secondary=20, subordinate=20, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d5200000-d54fffff
	Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

1e:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=1e, secondary=1f, subordinate=1f, sec-latency=0
	Memory behind bridge: d5500000-d57fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

1f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3014]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at d5500000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

20:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 02)
	Subsystem: LSI Logic / Symbios Logic Device [1000:3090]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at d5410000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at d5400000 (64-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at d0200000 [disabled] [size=2M]
	Capabilities: <access denied>
	Kernel driver in use: mptsas

40:00.0 VGA compatible controller [0300]: nVidia Corporation G71GL [Quadro FX 3500] [10de:029d] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Device [10de:032b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d2000000 (64-bit, non-prefetchable) [size=16M]
	Region 5: I/O ports at 1000 [size=128]
	[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
	Capabilities: <access denied>



-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.31-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.31-trunk-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.27     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.10-3     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.31-trunk-amd64 recommends:
ii  firmware-linux-f 2.6.31-1~experimental.1 Binary firmware for various driver

Versions of packages linux-image-2.6.31-trunk-amd64 suggests:
ii  grub                          0.97-59    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.31              <none>     (no description available)

-- debconf information:
  linux-image-2.6.31-trunk-amd64/postinst/depmod-error-initrd-2.6.31-trunk-amd64: false
* linux-image-2.6.31-trunk-amd64/postinst/missing-firmware-2.6.31-trunk-amd64:
  linux-image-2.6.31-trunk-amd64/postinst/bootloader-test-error-2.6.31-trunk-amd64:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.31-trunk-amd64/postinst/bootloader-error-2.6.31-trunk-amd64:
  linux-image-2.6.31-trunk-amd64/prerm/removing-running-kernel-2.6.31-trunk-amd64: true
  linux-image-2.6.31-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.31-trunk-amd64: true



--- End Message ---
--- Begin Message ---
It isn't a bug; it's a feature added to the driver as of 2.6.31 that reports
queue full conditions, possibly due to IO errors or performance problems.
http://article.gmane.org/gmane.linux.scsi/54973

Thanks to everyone who helped with this on the Debian side.



--- End Message ---

Reply to: