Bug#548630: linux-image-2.6.26-2-686: Crash/Hang with heavy disk write when using SATA AHCI mode
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19
Severity: important
System was configured in BIOS with IDE mode set to AHCI.
- ASUS p5q-vm MB, latest BIOS.
- When having heavy disk writing (disk to disk, or via network rsync from machine 1 to
target machine), system hangs after several GBytes have been written to disk.
- Problem is reproducable. Happens all the time when I want to rsync 50GB from one PC to
target. Reproduced atleast 10 times. 100% hitrate with rsync 50GB data.
- Problems happens with two different brands of HD's (did not test more)
- No logging information logged. Machine is dead
- Configured logging to remote machine. Did not result in any usefull logging.
- Pinging target not possible after hang.
- Keyboard is dead after hang.
- GUI hangs after system hang.
Problem is "resolved" by setting in BIOS the IDE mode to "IDE" instead of "AHCI". No hangs
since change in BIOS configuration.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 2.765782] ata1.01: HPA detected: current 2930277168, native 18446744072344861488
[ 2.765789] ata1.01: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.765794] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.773584] ata1.00: configured for UDMA/133
[ 2.782211] ata1.01: configured for UDMA/133
[ 3.257023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.265250] ata2.00: HPA detected: current 2930277168, native 18446744072344861488
[ 3.265256] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 3.265260] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.273220] ata2.00: configured for UDMA/133
[ 3.273342] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
[ 3.273535] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.273629] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.273694] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.273698] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.273732] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.274310] scsi2 : ata_piix
[ 3.274310] scsi3 : ata_piix
[ 3.274310] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 3.274310] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 3.604057] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.933491] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.948892] Driver 'sd' needs updating - please use bus_type methods
[ 3.948893] sd 0:0:0:0: [sda] 62500000 512-byte hardware sectors (32000 MB)
[ 3.948893] sd 0:0:0:0: [sda] Write Protect is off
[ 3.948893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.948893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.948893] sd 0:0:0:0: [sda] 62500000 512-byte hardware sectors (32000 MB)
[ 3.948893] sd 0:0:0:0: [sda] Write Protect is off
[ 3.948893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.948893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.948893] sda: sda1 sda2
[ 3.950456] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.950807] sd 0:0:1:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 3.950807] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.950807] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.950807] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.950807] sd 0:0:1:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 3.950807] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.950807] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.950807] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.950807] sdb: sdb1
[ 3.959031] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.959031] sd 1:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB)
[ 3.959031] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.959031] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.959031] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.959031] sd 1:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB)
[ 3.959031] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.959031] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.959031] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.959031] sdc: sdc1
[ 3.975103] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.165903] kjournald starting. Commit interval 5 seconds
[ 4.165903] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.428209] udevd version 125 started
[ 4.707991] Linux agpgart interface v0.103
[ 4.721622] agpgart: Detected an Intel G45/G43 Chipset.
[ 4.722134] agpgart: Detected 32764K stolen memory.
[ 4.735489] agpgart: AGP aperture is 256M @ 0xd0000000
[ 4.763223] input: Power Button (FF) as /class/input/input0
[ 4.787295] ACPI: Power Button (FF) [PWRF]
[ 4.787385] input: Power Button (CM) as /class/input/input1
[ 4.812446] ACPI: Power Button (CM) [PWRB]
[ 5.124052] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.199442] input: PC Speaker as /class/input/input2
[ 5.645105] EXT3 FS on sda1, internal journal
[ 6.423300] loop: module loaded
[ 6.458052] device-mapper: uevent: version 1.0.3
[ 6.458052] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.610839] fuse init (API version 7.9)
[ 6.626548] kjournald starting. Commit interval 5 seconds
[ 6.626655] EXT3 FS on sda2, internal journal
[ 6.626663] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.756609] r8169: eth0: link up
[ 6.756609] r8169: eth0: link up
[ 6.869045] NET: Registered protocol family 10
[ 6.869391] lo: Disabled Privacy Extensions
[ 8.902689] lp: driver loaded but no devices found
[ 8.956981] ppdev: user-space parallel port driver
[ 9.877547] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 10.263402] NET: Registered protocol family 5
[ 10.312319] mtrr: type mismatch for d1fe0000,10000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1fc0000,20000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1f80000,40000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1f00000,80000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1e00000,100000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1c00000,200000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1800000,400000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d1000000,800000 old: write-back new: write-combining
[ 10.312319] mtrr: type mismatch for d0000000,1000000 old: write-back new: write-combining
[ 17.457027] eth0: no IPv6 routers present
[ 2360.927812] padlock: VIA PadLock not detected.
[ 2361.058687] padlock: VIA PadLock Hash Engine not detected.
[ 2361.292465] kjournald starting. Commit interval 5 seconds
[ 2361.295336] EXT3 FS on dm-0, internal journal
[ 2361.295336] EXT3-fs: mounted filesystem with ordered data mode.
[ 2367.216504] kjournald starting. Commit interval 5 seconds
[ 2367.218250] EXT3 FS on dm-1, internal journal
[ 2367.218250] EXT3-fs: mounted filesystem with ordered data mode.
** Loaded modules:
Module Size Used by
sha256_generic 11360 0
aes_i586 7744 4
aes_generic 29256 1 aes_i586
cbc 3264 2
appletalk 26016 20
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
battery 10180 0
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 1
cpufreq_powersave 1856 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
ipv6 235396 35
fuse 42908 1
dm_crypt 11172 1
crypto_blkcipher 15236 4 cbc,dm_crypt
dm_mod 46216 5 dm_crypt
loop 12748 0
evdev 8000 2
pcspkr 2432 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
button 6096 0
intel_agp 22524 1
agpgart 28808 1 intel_agp
ext3 105576 4
jbd 39476 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 7
ata_generic 4676 0
ata_piix 14180 4
libata 140448 2 ata_generic,ata_piix
scsi_mod 129548 2 sd_mod,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
ide_core 96168 1 ide_pci_generic
r8169 23684 0
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 3 ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe9fa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9f9000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: I/O ports at c080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 221
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** Sound cards:
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
Reply to: