--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.28-1-686: snd-opl3sa2 loaded along with snd_hda_intel hangs s2disk on d630
- From: Hynek Vychodil <vychodil.hynek@gmail.com>
- Date: Mon, 16 Mar 2009 11:21:00 +0100
- Message-id: <20090316102100.4551.96077.reportbug@hynek-notebook.brno.gooddata.com>
Package: linux-image-2.6.28-1-686
Version: 2.6.28-1
Severity: important
s2disk causes Opps like http://www.kerneloops.org/raw.php?rawid=80591&msgid=
when snd-opl3sa2 is loaded. Plese note that this module is useless because
sound works without snd-opl3sa2 on my Dell Latitude D630. The module
snd_hda_intel seems enough. (I have added snd-opl3sa2 to modprobe blacklist.)
-- Package-specific info:
** Version:
Linux version 2.6.28-1-686 (Debian 2.6.28-1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Mon Feb 23 03:13:24 UTC 2009
** Command line:
root=/dev/sda6 ro usbcore.autosuspend=1 no_console_suspend
** Not tainted
** Kernel log:
[ 13.597063] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 13.598110] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 13.600913] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 13.602171] ACPI: AC Adapter [AC] (on-line)
[ 13.687364] ACPI: Battery Slot [BAT0] (battery present)
[ 13.687489] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 13.693671] ACPI: Lid Switch [LID]
[ 13.693779] ACPI: Battery Slot [BAT1] (battery absent)
[ 13.693896] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 13.708022] ACPI: Power Button (CM) [PBTN]
[ 13.708139] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 13.724016] ACPI: Sleep Button (CM) [SBTN]
[ 13.785219] ACPI: WMI: Mapper loaded
[ 14.112764] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input7
[ 14.132014] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 14.132127] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
[ 14.132365] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input8
[ 14.147200] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 14.252044] cfg80211: Using static regulatory domain info
[ 14.252109] cfg80211: Regulatory domain: US
[ 14.252167] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.252240] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 14.252303] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.252367] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.252430] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.252493] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.252557] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 14.252622] cfg80211: Calling CRDA for country: US
[ 14.422993] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 14.423073] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 14.423230] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.423306] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 14.423367] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 14.500146] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.501161] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[ 14.501294] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 14.501573] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.516192] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 15.082490] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.093832] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 15.413784] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 15.488582] iwl3945 0000:0c:00.0: PCI INT A disabled
[ 15.494602] udev: renamed network interface wlan0 to wlan1
[ 15.644365] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[ 15.699781] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
[ 15.794266] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.794431] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.828701] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 17.916274] Adding 4000176k swap on /dev/sda3. Priority:-1 extents:1 across:4000176k
[ 18.225736] EXT3 FS on sda6, internal journal
[ 18.320841] loop: module loaded
[ 18.561121] device-mapper: uevent: version 1.0.3
[ 18.561254] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 21.968486] tg3 0000:09:00.0: irq 508 for MSI/MSI-X
[ 22.129044] kvm: disabled by bios
[ 23.877871] tun: Universal TUN/TAP device driver, 1.6
[ 23.877960] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 24.258453] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.326548] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.326807] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 24.326899] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 24.326993] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 24.471057] NET: Registered protocol family 10
[ 24.472742] lo: Disabled Privacy Extensions
[ 24.474504] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 25.096516] tg3: eth1: Link is up at 1000 Mbps, full duplex.
[ 25.096608] tg3: eth1: Flow control is off for TX and off for RX.
[ 25.097592] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 30.806978] [drm] Initialized drm 1.1.0 20060810
[ 30.813449] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.813454] pci 0000:00:02.0: setting latency timer to 64
[ 30.813561] pci 0000:00:02.0: irq 507 for MSI/MSI-X
[ 30.813637] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 34.781702] Bluetooth: Core ver 2.13
[ 34.782627] NET: Registered protocol family 31
[ 34.782629] Bluetooth: HCI device and connection manager initialized
[ 34.782631] Bluetooth: HCI socket layer initialized
[ 34.806367] Bluetooth: L2CAP ver 2.11
[ 34.806370] Bluetooth: L2CAP socket layer initialized
[ 34.940087] Bluetooth: RFCOMM socket layer initialized
[ 34.940108] Bluetooth: RFCOMM TTY layer initialized
[ 34.940113] Bluetooth: RFCOMM ver 1.10
[ 35.280074] tap0: no IPv6 routers present
[ 35.877147] eth1: no IPv6 routers present
[ 42.285874] lp: driver loaded but no devices found
[ 42.428066] ppdev: user-space parallel port driver
[ 46.586686] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 46.586863] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 46.587072] iwl3945 0000:0c:00.0: irq 506 for MSI/MSI-X
[ 46.587195] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 46.887856] Registered led device: iwl-phy0:radio
[ 46.887903] Registered led device: iwl-phy0:assoc
[ 46.887938] Registered led device: iwl-phy0:RX
[ 46.887972] Registered led device: iwl-phy0:TX
[ 46.903027] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 71.024104] CE: hpet increasing min_delta_ns to 15000 nsec
[ 73.676713] eth1: no IPv6 routers present
[ 76.797640] NET: Registered protocol family 4
[ 76.877519] NET: Registered protocol family 3
[ 76.935899] NET: Registered protocol family 5
** Loaded modules:
Module Size Used by
appletalk 25732 2
ax25 41316 2
ipx 19880 2
p8023 1760 1 ipx
ppdev 6500 0
parport_pc 22388 0
lp 8140 0
parport 30964 3 ppdev,parport_pc,lp
rfcomm 31024 2
l2cap 18336 9 rfcomm
bluetooth 47808 4 rfcomm,l2cap
i915 48900 2
drm 76456 3 i915
ipt_MASQUERADE 2656 2
ipv6 231536 12
iptable_nat 4900 1
nf_nat 16244 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 11660 3 iptable_nat,nf_nat
nf_conntrack 57000 4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1920 1 nf_conntrack_ipv4
ip_tables 10128 1 iptable_nat
x_tables 13540 3 ipt_MASQUERADE,iptable_nat,ip_tables
tun 9508 0
acpi_cpufreq 7180 0
cpufreq_userspace 2916 0
cpufreq_powersave 1536 0
cpufreq_stats 3844 0
cpufreq_conservative 5672 0
kvm 127164 0
ext2 54024 1
dm_snapshot 15972 0
dm_mirror 12320 0
dm_region_hash 10816 1 dm_mirror
dm_log 8548 2 dm_mirror,dm_region_hash
dm_mod 47188 3 dm_snapshot,dm_mirror,dm_log
firewire_sbp2 12556 0
firewire_core 32768 1 firewire_sbp2
crc_itu_t 2080 1 firewire_core
loop 13036 0
snd_hda_intel 362712 1
snd_opl3sa2 14356 0
snd_wss_lib 22784 1 snd_opl3sa2
snd_pcm_oss 32128 0
snd_mixer_oss 12256 1 snd_pcm_oss
snd_pcm 63332 3 snd_hda_intel,snd_wss_lib,snd_pcm_oss
snd_opl3_lib 9184 1 snd_opl3sa2
snd_hwdep 6244 1 snd_opl3_lib
snd_mpu401_uart 6368 1 snd_opl3sa2
snd_seq_dummy 2628 0
snd_seq_oss 24636 0
snd_seq_midi 5760 0
snd_rawmidi 18784 2 snd_mpu401_uart,snd_seq_midi
serio_raw 4836 0
snd_seq_midi_event 6368 2 snd_seq_oss,snd_seq_midi
arc4 1824 2
dcdbas 6752 0
snd_seq 41576 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
pcspkr 2368 0
i2c_i801 8176 0
psmouse 36752 0
ecb 2624 2
snd_timer 17992 4 snd_wss_lib,snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 6412 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_core 20948 1 i2c_i801
iTCO_wdt 10148 0
joydev 8832 0
iwl3945 77500 0
evdev 8356 9
snd 45912 16 snd_hda_intel,snd_opl3sa2,snd_wss_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rfkill 9744 2 iwl3945
mac80211 135872 1 iwl3945
led_class 3844 1 iwl3945
soundcore 6440 1 snd
snd_page_alloc 8200 3 snd_hda_intel,snd_wss_lib,snd_pcm
cfg80211 26864 2 iwl3945,mac80211
video 16848 0
output 2784 1 video
wmi 6600 0
button 6032 0
battery 10116 0
ac 4164 0
intel_agp 22812 1
agpgart 30740 3 drm,intel_agp
ext3 105704 1
jbd 41492 1 ext3
mbcache 7396 2 ext2,ext3
sd_mod 27960 4
crc_t10dif 1888 1 sd_mod
ide_cd_mod 31528 0
cdrom 29912 1 ide_cd_mod
ata_generic 4644 0
usbhid 28532 0
hid 34668 1 usbhid
ata_piix 19332 3
libata 148108 2 ata_generic,ata_piix
scsi_mod 135628 3 firewire_sbp2,sd_mod,libata
piix 5864 0
ide_pci_generic 3652 0
ide_core 95256 3 ide_cd_mod,piix,ide_pci_generic
tg3 91236 0
ehci_hcd 30188 0
uhci_hcd 19632 0
usbcore 122204 4 usbhid,ehci_hcd,uhci_hcd
thermal 15292 0
processor 40044 4 acpi_cpufreq,thermal
fan 4388 0
thermal_sys 10536 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Latitude D630 [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 507
Region 0: Memory at f6e00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6f00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Dell Latitude D630 [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6dfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: f6c00000-f6cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f6b00000-f6bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=16]
Region 5: I/O ports at eff0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6dfbf00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 508
Region 0: Memory at f6bf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 506
Region 0: Memory at f6cff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.28-1-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.28-1-686 recommends:
ii libc6-i686 2.9-4 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.28-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.28 <none> (no description available)
-- debconf information:
linux-image-2.6.28-1-686/postinst/old-system-map-link-2.6.28-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.28-1-686/postinst/bootloader-test-error-2.6.28-1-686:
linux-image-2.6.28-1-686/prerm/would-invalidate-boot-loader-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/initrd-2.6.28-1-686:
linux-image-2.6.28-1-686/preinst/abort-overwrite-2.6.28-1-686:
linux-image-2.6.28-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.28-1-686/preinst/failed-to-move-modules-2.6.28-1-686:
linux-image-2.6.28-1-686/preinst/lilo-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/create-kimage-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/elilo-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/abort-install-2.6.28-1-686:
linux-image-2.6.28-1-686/postinst/depmod-error-initrd-2.6.28-1-686: false
linux-image-2.6.28-1-686/postinst/old-dir-initrd-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.28-1-686/postinst/depmod-error-2.6.28-1-686: false
linux-image-2.6.28-1-686/preinst/overwriting-modules-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/old-initrd-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/prerm/removing-running-kernel-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/bootloader-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/bootloader-error-2.6.28-1-686:
--- End Message ---