--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.28-1-686: hangs on via padlock RNG module initialization
- From: Olivier Berger <oberger@ouvaton.org>
- Date: Thu, 19 Mar 2009 14:25:37 +0100
- Message-id: <20090319132537.4848.35984.reportbug@asustour>
Package: linux-image-2.6.28-1-686
Version: 2.6.28-1
Severity: normal
Whenever booting the kernel on my VIA mainboard, it hangs, and I need to CTRL-C the VIA RNG module initialization.
The same problem seems to have been reported here : http://bugs.archlinux.org/task/12823 but couldn't google anything else on the subject.
Best regards,
-- Package-specific info:
** Version:
Linux version 2.6.28-1-686 (Debian 2.6.28-1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Mon Feb 23 03:13:24 UTC 2009
** Command line:
root=/dev/hdd3 ro single
** Tainted: P W (513)
** Kernel log:
[ 6.643547] EXT3-fs: write access will be enabled during recovery.
[ 7.525412] kjournald starting. Commit interval 5 seconds
[ 7.525505] EXT3-fs: recovery complete.
[ 7.604455] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.417375] udevd version 125 started
[ 10.970601] Linux agpgart interface v0.103
[ 11.006927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.137633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.205763] agpgart: Detected VIA CX700 chipset
[ 11.216614] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 12.617329] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 13.146745] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.156025] ACPI: Power Button (FF) [PWRF]
[ 13.156305] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 13.170305] ACPI: Sleep Button (CM) [SLPB]
[ 13.170607] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 13.188049] ACPI: Power Button (CM) [PWRB]
[ 13.928203] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 14.299027] parport_pc 00:07: reported by Plug and Play ACPI
[ 14.299134] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 14.431417] ndiswrapper version 1.54 loaded (smp=yes, preempt=no)
[ 15.670558] ndiswrapper: driver vnwl (VIA,07/21/2008,2.17.00.3000) loaded
[ 15.671089] ndiswrapper 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.677492] ndiswrapper: using IRQ 19
[ 16.456809] wlan0: ethernet device 00:18:02:06:4c:f2 using NDIS driver: vnwl, version: 0x20011, NDIS version: 0x500, vendor: 'VIA Networking Technologies PCI-Cardbus Wireless LAN Adapter ', 1106:3253.5.conf
[ 16.456962] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 16.457168] usbcore: registered new interface driver ndiswrapper
[ 17.189181] HDA Intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.189433] HDA Intel 0000:02:01.0: setting latency timer to 64
[ 17.189443] HDA Intel 0000:02:01.0: PCI: Disallowing DAC for device
[ 20.488059] Adding 393584k swap on /dev/hdd2. Priority:-1 extents:1 across:393584k
[ 20.698084] EXT3 FS on hdd3, internal journal
[ 21.692031] loop: module loaded
[ 21.766046] VIA RNG detected
[ 21.795556] padlock: Using VIA PadLock ACE for AES algorithm.
[ 144.536596] ------------[ cut here ]------------
[ 144.536660] WARNING: at crypto/algapi.c:293 crypto_wait_for_test+0x4b/0x53()
[ 144.536722] Modules linked in: sha1_generic padlock_sha(+) padlock_aes aes_generic via_rng rng_core loop snd_hda_intel snd_pcm snd_seq snd_timer snd_seq_device snd evdev soundcore snd_page_alloc ndiswrapper parport_pc parport psmouse button serio_raw pcspkr i2c_viapro i2c_core via_agp shpchp pci_hotplug agpgart ext3 jbd mbcache ide_gd_mod ata_generic libata scsi_mod 8139too 8139cp mii uhci_hcd ehci_hcd via82cxxx ide_pci_generic usbcore ide_core thermal processor fan thermal_sys
[ 144.538877] Pid: 1649, comm: modprobe Tainted: P 2.6.28-1-686 #1
[ 144.538938] Call Trace:
[ 144.539004] [<c0126dd9>] warn_on_slowpath+0x40/0x61
[ 144.539067] [<c0120f20>] check_preempt_wakeup+0x138/0x171
[ 144.539129] [<c0121f16>] try_to_wake_up+0x168/0x172
[ 144.539193] [<c02e5c92>] schedule_timeout+0x14/0xbb
[ 144.539267] [<c013a302>] notifier_call_chain+0x2a/0x47
[ 144.539332] [<c02e700f>] _spin_lock_irq+0x13/0x15
[ 144.539392] [<c02e5384>] wait_for_common+0x111/0x12d
[ 144.539453] [<c0121f20>] default_wake_function+0x0/0x8
[ 144.539514] [<c01e5087>] crypto_wait_for_test+0x4b/0x53
[ 144.539576] [<c01e5158>] crypto_register_alg+0x3f/0x44
[ 144.539644] [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[ 144.539707] [<dc995032>] padlock_init+0x32/0x68 [padlock_sha]
[ 144.539770] [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[ 144.539832] [<c0101138>] _stext+0x50/0x17a
[ 144.539897] [<c01461d0>] load_module+0x15ef/0x177b
[ 144.539979] [<c0176238>] vma_link+0x51/0x75
[ 144.540050] [<c0176253>] vma_link+0x6c/0x75
[ 144.540127] [<c013a56a>] blocking_notifier_call_chain+0x9/0xc
[ 144.540193] [<c0146499>] sys_init_module+0x87/0x174
[ 144.540256] [<c01038e3>] sysenter_do_call+0x12/0x2f
[ 144.540315] ---[ end trace 2d77b5519b6ee597 ]---
[ 144.540536] ------------[ cut here ]------------
[ 144.540595] WARNING: at crypto/algapi.c:293 crypto_wait_for_test+0x4b/0x53()
[ 144.540655] Modules linked in: sha1_generic padlock_sha(+) padlock_aes aes_generic via_rng rng_core loop snd_hda_intel snd_pcm snd_seq snd_timer snd_seq_device snd evdev soundcore snd_page_alloc ndiswrapper parport_pc parport psmouse button serio_raw pcspkr i2c_viapro i2c_core via_agp shpchp pci_hotplug agpgart ext3 jbd mbcache ide_gd_mod ata_generic libata scsi_mod 8139too 8139cp mii uhci_hcd ehci_hcd via82cxxx ide_pci_generic usbcore ide_core thermal processor fan thermal_sys
[ 144.542775] Pid: 1649, comm: modprobe Tainted: P W 2.6.28-1-686 #1
[ 144.542836] Call Trace:
[ 144.542893] [<c0126dd9>] warn_on_slowpath+0x40/0x61
[ 144.542954] [<c0120f20>] check_preempt_wakeup+0x138/0x171
[ 144.543015] [<c0121f16>] try_to_wake_up+0x168/0x172
[ 144.543083] [<c01e7ed6>] cryptomgr_notify+0x27e/0x2a0
[ 144.543146] [<c013a302>] notifier_call_chain+0x2a/0x47
[ 144.543210] [<c02e700f>] _spin_lock_irq+0x13/0x15
[ 144.543270] [<c02e5384>] wait_for_common+0x111/0x12d
[ 144.543338] [<c0121f20>] default_wake_function+0x0/0x8
[ 144.543399] [<c01e5087>] crypto_wait_for_test+0x4b/0x53
[ 144.543460] [<c01e5158>] crypto_register_alg+0x3f/0x44
[ 144.543523] [<dc995042>] padlock_init+0x42/0x68 [padlock_sha]
[ 144.543586] [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[ 144.543647] [<c0101138>] _stext+0x50/0x17a
[ 144.543707] [<c01461d0>] load_module+0x15ef/0x177b
[ 144.543784] [<c0176238>] vma_link+0x51/0x75
[ 144.543844] [<c0176253>] vma_link+0x6c/0x75
[ 144.543920] [<c013a56a>] blocking_notifier_call_chain+0x9/0xc
[ 144.543985] [<c0146499>] sys_init_module+0x87/0x174
[ 144.544057] [<c01038e3>] sysenter_do_call+0x12/0x2f
[ 144.544115] ---[ end trace 2d77b5519b6ee597 ]---
[ 144.544173] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[ 144.560088] alg: Unexpected test result for sha1-padlock: 0
[ 144.911981] alg: Unexpected test result for sha256-padlock: 0
[ 184.427859] longhaul: APIC detected. Longhaul is currently broken in this configuration.
[ 185.363514] NET: Registered protocol family 10
[ 185.364936] lo: Disabled Privacy Extensions
[ 189.197860] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 193.543518] [drm] Initialized drm 1.1.0 20060810
[ 193.559368] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 193.560075] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 193.588958] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 193.589003] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 193.589063] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 196.064037] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
via 35200 2
drm 76456 3 via
ipv6 231536 22
battery 10116 0
cpufreq_stats 3844 0
cpufreq_conservative 5672 0
cpufreq_powersave 1536 0
cpufreq_userspace 2916 0
ext2 54024 1
sha256_generic 11392 0
sha1_generic 2208 0
padlock_sha 3648 0
padlock_aes 4704 0
aes_generic 27784 1 padlock_aes
via_rng 2080 0
rng_core 3908 1 via_rng
loop 13036 0
snd_hda_intel 362712 0
snd_pcm 63332 1 snd_hda_intel
snd_seq 41576 0
snd_timer 17992 2 snd_pcm,snd_seq
snd_seq_device 6412 1 snd_seq
snd 45912 5 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 8356 4
soundcore 6440 1 snd
snd_page_alloc 8200 2 snd_hda_intel,snd_pcm
ndiswrapper 153364 0
parport_pc 22388 0
parport 30964 1 parport_pc
psmouse 36752 0
button 6032 0
serio_raw 4836 0
pcspkr 2368 0
i2c_viapro 7028 0
i2c_core 20948 1 i2c_viapro
via_agp 7840 1
shpchp 27316 0
pci_hotplug 23648 1 shpchp
agpgart 30740 2 drm,via_agp
ext3 105704 1
jbd 41492 1 ext3
mbcache 7396 2 ext2,ext3
ide_gd_mod 19396 4
ata_generic 4644 0
libata 148108 1 ata_generic
scsi_mod 135628 1 libata
8139too 21472 0
8139cp 17568 0
mii 4928 2 8139too,8139cp
uhci_hcd 19632 0
ehci_hcd 30188 0
via82cxxx 6244 3
ide_pci_generic 3652 0
usbcore 122204 4 ndiswrapper,uhci_hcd,ehci_hcd
ide_core 95256 3 ide_gd_mod,via82cxxx,ide_pci_generic
thermal 15292 0
processor 40044 1 thermal
fan 4388 0
thermal_sys 10536 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324] (rev 03)
Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324]
Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324]
Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:3324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324]
Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:7324]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fc800000-fe8fffff
Prefetchable memory behind bridge: aff00000-efefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller [1106:5324] (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Device [1106:0581]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [b0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [88] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge [1106:8324]
Subsystem: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge [1106:8324]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro
00:11.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e]
Subsystem: VIA Technologies, Inc. CX700/VX700 Internal Module Bus [1106:324e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
00:13.0 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:324b] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge [1106:324a] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CX700/VX700 [S3 UniChrome Pro] [1106:3157] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Device [0908:1975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M]
Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe8f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
02:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Subsystem: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend+
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
03:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
03:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
03:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at d480 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
03:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
03:06.0 Network controller [0280]: VIA Technologies, Inc. VIA VT6655 WiFi Adapter, 802.11a/b/g [1106:3253]
Subsystem: VIA Technologies, Inc. Device [1106:6655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at d000 [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ndiswrapper
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.28-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.28-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.28-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.28 <none> (no description available)
-- debconf information:
linux-image-2.6.28-1-686/postinst/old-system-map-link-2.6.28-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.28-1-686/postinst/bootloader-test-error-2.6.28-1-686:
linux-image-2.6.28-1-686/prerm/would-invalidate-boot-loader-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/initrd-2.6.28-1-686:
linux-image-2.6.28-1-686/preinst/abort-overwrite-2.6.28-1-686:
linux-image-2.6.28-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.28-1-686/preinst/failed-to-move-modules-2.6.28-1-686:
linux-image-2.6.28-1-686/preinst/lilo-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/create-kimage-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/elilo-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/abort-install-2.6.28-1-686:
linux-image-2.6.28-1-686/postinst/depmod-error-initrd-2.6.28-1-686: false
linux-image-2.6.28-1-686/postinst/old-dir-initrd-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.28-1-686/postinst/depmod-error-2.6.28-1-686: false
linux-image-2.6.28-1-686/preinst/overwriting-modules-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/old-initrd-link-2.6.28-1-686: true
linux-image-2.6.28-1-686/prerm/removing-running-kernel-2.6.28-1-686: true
linux-image-2.6.28-1-686/preinst/bootloader-initrd-2.6.28-1-686: true
linux-image-2.6.28-1-686/postinst/bootloader-error-2.6.28-1-686:
--- End Message ---