Your message dated Wed, 22 Jul 2009 03:18:03 +0200 with message-id <1248225484.31599.140.camel@localhost> and subject line Re: Bug#537953: linux-image-2.6.30-1-amd64: no radeon DRI has caused the Debian Bug report #537953, regarding linux-image-2.6.30-1-amd64: no radeon DRI to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 537953: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=537953 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-amd64: no radeon DRI
- From: Michal Suchanek <hramrach@centrum.cz>
- Date: Wed, 22 Jul 2009 01:04:44 +0200
- Message-id: <[🔎] 20090721230444.5719.72808.reportbug@heretic.burning-in-hell>
Package: linux-image-2.6.30-1-amd64 Version: 2.6.30-3 Severity: normal There is no DRI with X radeon driver and it seems somewhat related to the log below. -- Package-specific info: ** Version: Linux version 2.6.30-1-amd64 (Debian 2.6.30-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 12:20:34 UTC 2009 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro ** Not tainted ** Kernel log: [ 3484.894693] [drm] Setting GART location based on new memory map [ 3484.894930] [drm] Loading R300 Microcode [ 3484.894935] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 3484.964119] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 3484.964124] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [ 4430.834656] [drm] Setting GART location based on new memory map [ 4430.834895] [drm] Loading R300 Microcode [ 4430.834899] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 4430.884835] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 4430.884840] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [ 4736.982831] [drm] Setting GART location based on new memory map [ 4736.983065] [drm] Loading R300 Microcode [ 4736.983069] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 4737.028843] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 4737.028848] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11259.575109] [drm] Setting GART location based on new memory map [11259.575344] [drm] Loading R300 Microcode [11259.575349] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11259.620865] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11259.620870] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11289.913736] [drm] Setting GART location based on new memory map [11289.913971] [drm] Loading R300 Microcode [11289.913976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11289.960849] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11289.960854] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11362.723557] [drm] Setting GART location based on new memory map [11362.723793] [drm] Loading R300 Microcode [11362.723798] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11362.768880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11362.768885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11380.147089] [drm] Setting GART location based on new memory map [11380.147325] [drm] Loading R300 Microcode [11380.147329] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11380.192887] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11380.192892] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11397.407736] [drm] Setting GART location based on new memory map [11397.407972] [drm] Loading R300 Microcode [11397.407976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11397.452885] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11397.452890] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11423.699820] [drm] Setting GART location based on new memory map [11423.700076] [drm] Loading R300 Microcode [11423.700081] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11423.744880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11423.744885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11453.601961] [drm] Setting GART location based on new memory map [11453.602198] [drm] Loading R300 Microcode [11453.602202] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11453.648876] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11453.648881] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11464.537793] [drm] Setting GART location based on new memory map [11464.538026] [drm] Loading R300 Microcode [11464.538031] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11464.584895] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11464.584900] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11568.411815] [drm] Setting GART location based on new memory map [11568.412066] [drm] Loading R300 Microcode [11568.412071] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11568.456894] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11568.456899] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11639.963098] [drm] Setting GART location based on new memory map [11639.963338] [drm] Loading R300 Microcode [11639.963343] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11640.008822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11640.008827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [11650.603470] [drm] Setting GART location based on new memory map [11650.603703] [drm] Loading R300 Microcode [11650.603708] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [11650.648853] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [11650.648858] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [12048.389714] [drm] Setting GART location based on new memory map [12048.389947] [drm] Loading R300 Microcode [12048.389951] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [12048.436822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [12048.436827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [12058.678711] [drm] Setting GART location based on new memory map [12058.678943] [drm] Loading R300 Microcode [12058.678948] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [12058.724863] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [12058.724868] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [12116.302071] [drm] Setting GART location based on new memory map [12116.302309] [drm] Loading R300 Microcode [12116.302313] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [12116.348878] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [12116.348883] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [12593.562522] [drm] Setting GART location based on new memory map [12593.562760] [drm] Loading R300 Microcode [12593.562764] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [12593.608862] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [12593.608867] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [12625.259687] [drm] Setting GART location based on new memory map [12625.259924] [drm] Loading R300 Microcode [12625.259929] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [12625.304821] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [12625.304826] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [13282.388538] [drm] Setting GART location based on new memory map [13282.388773] [drm] Loading R300 Microcode [13282.388777] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [13282.436889] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [13282.436894] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! ** Loaded modules: Module Size Used by radeon 141952 0 drm 172512 1 radeon ehci_hcd 33676 0 binfmt_misc 9260 1 reiserfs 208568 1 fuse 54656 1 coretemp 6656 0 w83627ehf 22944 0 hwmon_vid 3088 1 w83627ehf loop 15964 0 firewire_sbp2 15392 0 joydev 10992 0 snd_hda_codec_realtek 250068 1 psmouse 42156 0 evdev 10448 4 serio_raw 5844 0 i2c_i801 10464 0 i2c_core 25424 2 drm,i2c_i801 rng_core 4872 0 iTCO_wdt 12160 0 snd_hda_intel 26680 1 snd_hda_codec 75168 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 8120 1 snd_hda_codec snd_pcm_oss 37200 0 snd_mixer_oss 15072 1 snd_pcm_oss wacom 20648 0 snd_pcm 78440 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss parport_pc 27080 0 parport 38224 1 parport_pc snd_seq_midi 6976 0 snd_rawmidi 22992 1 snd_seq_midi snd_seq_midi_event 7696 1 snd_seq_midi asus_atk0110 7744 0 snd_seq 51312 2 snd_seq_midi,snd_seq_midi_event snd_timer 21824 2 snd_pcm,snd_seq snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq processor 40112 0 button 6512 0 snd 63864 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7984 1 snd snd_page_alloc 9968 2 snd_hda_intel,snd_pcm intel_agp 28752 0 ext3 122736 4 jbd 48072 1 ext3 mbcache 8804 1 ext3 ide_cd_mod 29032 0 cdrom 34360 1 ide_cd_mod usbhid 37248 0 hid 41328 1 usbhid sd_mod 33688 7 crc_t10dif 2096 1 sd_mod piix 7256 0 ide_pci_generic 4964 0 ata_piix 25124 7 ide_core 104992 3 ide_cd_mod,piix,ide_pci_generic ata_generic 5924 0 libata 175004 2 ata_piix,ata_generic firewire_ohci 22340 0 atl1 30808 0 mii 5600 1 atl1 firewire_core 44916 2 firewire_sbp2,firewire_ohci crc_itu_t 2720 1 firewire_core scsi_mod 158464 3 firewire_sbp2,sd_mod,libata uhci_hcd 22192 0 thermal 15952 0 fan 5224 0 thermal_sys 16496 3 processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:817a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: d7f00000-d7ffffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d7cf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: d7e00000-d7efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 8000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 8400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 8800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 9000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d7cffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: d7d00000-d7dfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: ata_generic, ide-pci-generic, piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:2601] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at a800 [size=8] Region 1: I/O ports at a400 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at d7dff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at b800 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at d7ec0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at d7ea0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 Kernel modules: atl1 04:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 0x3e50 [Radeon X600] [1002:3e50] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device [174b:1500] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=256] Region 2: Memory at d7fe0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at d7fc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb 04:00.1 Display controller [0380]: ATI Technologies Inc RV380 [Radeon X600] (Secondary) [1002:3e70] Subsystem: PC Partner Limited Device [174b:1501] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Region 0: Memory at d7ff0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (900, 'stable'), (500, 'testing'), (300, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.30-1-amd64 recommends no packages. Versions of packages linux-image-2.6.30-1-amd64 suggests: ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version ii linux-doc-2.6.30 2.6.30-3 Linux kernel specific documentatio -- debconf-show failed
--- End Message ---
--- Begin Message ---
- To: 537953-done@bugs.debian.org
- Subject: Re: Bug#537953: linux-image-2.6.30-1-amd64: no radeon DRI
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Wed, 22 Jul 2009 03:18:03 +0200
- Message-id: <1248225484.31599.140.camel@localhost>
- In-reply-to: <[🔎] a5d587fb0907211814h43427ca5k9fe1c99f28e7be@mail.gmail.com>
- References: <[🔎] 20090721230444.5719.72808.reportbug@heretic.burning-in-hell> <[🔎] 1248222358.31599.138.camel@localhost> <[🔎] a5d587fb0907211814h43427ca5k9fe1c99f28e7be@mail.gmail.com>
On Wed, 2009-07-22 at 03:14 +0200, Michal Suchanek wrote: > 2009/7/22 Ben Hutchings <ben@decadent.org.uk>: > > On Wed, 2009-07-22 at 01:04 +0200, Michal Suchanek wrote: > >> Package: linux-image-2.6.30-1-amd64 > >> Version: 2.6.30-3 > >> Severity: normal > >> > >> > >> There is no DRI with X radeon driver and it seems somewhat related to > >> the log below. > > > > Did you install firmware-linux? > > No, I overlooked that among the numerous other firmware packages. > > How do I tell I should? > > It's not like linux or the radeon driver recomments that. Sorry, but packages in main must not recommend packages in non-free. Ben. -- Ben Hutchings Unix is many things to many people, but it's never been everything to anybody.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---