Bug#537953: linux-image-2.6.30-1-amd64: no radeon DRI
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-3
Severity: normal
There is no DRI with X radeon driver and it seems somewhat related to
the log below.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 12:20:34 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro
** Not tainted
** Kernel log:
[ 3484.894693] [drm] Setting GART location based on new memory map
[ 3484.894930] [drm] Loading R300 Microcode
[ 3484.894935] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 3484.964119] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 3484.964124] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 4430.834656] [drm] Setting GART location based on new memory map
[ 4430.834895] [drm] Loading R300 Microcode
[ 4430.834899] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 4430.884835] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 4430.884840] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 4736.982831] [drm] Setting GART location based on new memory map
[ 4736.983065] [drm] Loading R300 Microcode
[ 4736.983069] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 4737.028843] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 4737.028848] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11259.575109] [drm] Setting GART location based on new memory map
[11259.575344] [drm] Loading R300 Microcode
[11259.575349] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11259.620865] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11259.620870] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11289.913736] [drm] Setting GART location based on new memory map
[11289.913971] [drm] Loading R300 Microcode
[11289.913976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11289.960849] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11289.960854] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11362.723557] [drm] Setting GART location based on new memory map
[11362.723793] [drm] Loading R300 Microcode
[11362.723798] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11362.768880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11362.768885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11380.147089] [drm] Setting GART location based on new memory map
[11380.147325] [drm] Loading R300 Microcode
[11380.147329] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11380.192887] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11380.192892] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11397.407736] [drm] Setting GART location based on new memory map
[11397.407972] [drm] Loading R300 Microcode
[11397.407976] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11397.452885] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11397.452890] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11423.699820] [drm] Setting GART location based on new memory map
[11423.700076] [drm] Loading R300 Microcode
[11423.700081] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11423.744880] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11423.744885] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11453.601961] [drm] Setting GART location based on new memory map
[11453.602198] [drm] Loading R300 Microcode
[11453.602202] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11453.648876] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11453.648881] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11464.537793] [drm] Setting GART location based on new memory map
[11464.538026] [drm] Loading R300 Microcode
[11464.538031] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11464.584895] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11464.584900] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11568.411815] [drm] Setting GART location based on new memory map
[11568.412066] [drm] Loading R300 Microcode
[11568.412071] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11568.456894] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11568.456899] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11639.963098] [drm] Setting GART location based on new memory map
[11639.963338] [drm] Loading R300 Microcode
[11639.963343] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11640.008822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11640.008827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[11650.603470] [drm] Setting GART location based on new memory map
[11650.603703] [drm] Loading R300 Microcode
[11650.603708] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[11650.648853] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[11650.648858] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12048.389714] [drm] Setting GART location based on new memory map
[12048.389947] [drm] Loading R300 Microcode
[12048.389951] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12048.436822] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12048.436827] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12058.678711] [drm] Setting GART location based on new memory map
[12058.678943] [drm] Loading R300 Microcode
[12058.678948] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12058.724863] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12058.724868] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12116.302071] [drm] Setting GART location based on new memory map
[12116.302309] [drm] Loading R300 Microcode
[12116.302313] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12116.348878] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12116.348883] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12593.562522] [drm] Setting GART location based on new memory map
[12593.562760] [drm] Loading R300 Microcode
[12593.562764] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12593.608862] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12593.608867] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[12625.259687] [drm] Setting GART location based on new memory map
[12625.259924] [drm] Loading R300 Microcode
[12625.259929] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[12625.304821] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[12625.304826] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[13282.388538] [drm] Setting GART location based on new memory map
[13282.388773] [drm] Loading R300 Microcode
[13282.388777] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[13282.436889] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[13282.436894] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
** Loaded modules:
Module Size Used by
radeon 141952 0
drm 172512 1 radeon
ehci_hcd 33676 0
binfmt_misc 9260 1
reiserfs 208568 1
fuse 54656 1
coretemp 6656 0
w83627ehf 22944 0
hwmon_vid 3088 1 w83627ehf
loop 15964 0
firewire_sbp2 15392 0
joydev 10992 0
snd_hda_codec_realtek 250068 1
psmouse 42156 0
evdev 10448 4
serio_raw 5844 0
i2c_i801 10464 0
i2c_core 25424 2 drm,i2c_i801
rng_core 4872 0
iTCO_wdt 12160 0
snd_hda_intel 26680 1
snd_hda_codec 75168 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8120 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
wacom 20648 0
snd_pcm 78440 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
parport_pc 27080 0
parport 38224 1 parport_pc
snd_seq_midi 6976 0
snd_rawmidi 22992 1 snd_seq_midi
snd_seq_midi_event 7696 1 snd_seq_midi
asus_atk0110 7744 0
snd_seq 51312 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
processor 40112 0
button 6512 0
snd 63864 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
snd_page_alloc 9968 2 snd_hda_intel,snd_pcm
intel_agp 28752 0
ext3 122736 4
jbd 48072 1 ext3
mbcache 8804 1 ext3
ide_cd_mod 29032 0
cdrom 34360 1 ide_cd_mod
usbhid 37248 0
hid 41328 1 usbhid
sd_mod 33688 7
crc_t10dif 2096 1 sd_mod
piix 7256 0
ide_pci_generic 4964 0
ata_piix 25124 7
ide_core 104992 3 ide_cd_mod,piix,ide_pci_generic
ata_generic 5924 0
libata 175004 2 ata_piix,ata_generic
firewire_ohci 22340 0
atl1 30808 0
mii 5600 1 atl1
firewire_core 44916 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
scsi_mod 158464 3 firewire_sbp2,sd_mod,libata
uhci_hcd 22192 0
thermal 15952 0
fan 5224 0
thermal_sys 16496 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d7f00000-d7ffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d7e00000-d7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 8000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 8400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 8800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d7cffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d7d00000-d7dfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, ide-pci-generic, piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at a800 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d7dff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b800 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d7ec0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at d7ea0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1
04:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 0x3e50 [Radeon X600] [1002:3e50] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at d7fe0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d7fc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
04:00.1 Display controller [0380]: ATI Technologies Inc RV380 [Radeon X600] (Secondary) [1002:3e70]
Subsystem: PC Partner Limited Device [174b:1501]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Region 0: Memory at d7ff0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (900, 'stable'), (500, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
ii linux-doc-2.6.30 2.6.30-3 Linux kernel specific documentatio
-- debconf-show failed
Reply to: