Bug#533565: linux-image-2.6.30-1-686: ATA bus error messages for PATA_SCH module
Package: linux-image-2.6.30-1-686
Version: 2.6.30-1
Severity: normal
am using Debian 5.0 with 2.6.30 kernel. I see the following messages during kernel boot. Here is the relevant dmesg output:
[ 4.368333] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4.368424] ata1.00: BMDMA stat 0x24
[ 4.368511] ata1.00: cmd c8/00:80:59:0d:4c/00:00:00:00:00/e2 tag 0 dma 65536 in
[ 4.368515] res 51/84:00:d8:0d:4c/00:00:00:00:00/e2 Emask 0x10 (ATA bus error)
[ 4.368715] ata1.00: status: { DRDY ERR }
[ 4.368790] ata1.00: error: { ICRC ABRT }
[ 4.368892] ata1: soft resetting link
[ 4.553143] ata1.00: configured for UDMA/100
[ 4.553231] ata1: EH complete
[ 4.567926] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4.568024] ata1.00: BMDMA stat 0x24
[ 4.568119] ata1.00: cmd c8/00:80:59:0d:4c/00:00:00:00:00/e2 tag 0 dma 65536 in
[ 4.568122] res 51/84:00:d8:0d:4c/00:00:00:00:00/e2 Emask 0x10 (ATA bus error)
[ 4.568323] ata1.00: status: { DRDY ERR }
[ 4.568398] ata1.00: error: { ICRC ABRT }
[ 4.568493] ata1: soft resetting link
[ 4.753342] ata1.00: configured for UDMA/100
[ 4.753427] ata1: EH complete
and 3-4 more exact repetitions of the above messages.
I just have a single IDE drive attached and the IDE driver that is loaded is:
CONFIG_PATA_SCH.
What does the above error message mean? Also I see these error messages on all
the recent kernels - 2.6.26, 2.6.28, 2.6.29 and 2.6.30.
Please let me know if you need output of additional things.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-11) ) #1 SMP Sun Jun 14 16:11:32 UTC 2009
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 4.759319] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4.759387] ata1.00: BMDMA stat 0x24
[ 4.759456] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 4.759460] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 4.759589] ata1.00: status: { DRDY ERR }
[ 4.759666] ata1.00: error: { ICRC ABRT }
[ 4.759762] ata1: soft resetting link
[ 4.928451] ata1.00: configured for UDMA/100
[ 4.928476] ata1: EH complete
[ 4.933670] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4.933758] ata1.00: BMDMA stat 0x24
[ 4.933846] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 4.933850] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 4.934052] ata1.00: status: { DRDY ERR }
[ 4.934128] ata1.00: error: { ICRC ABRT }
[ 4.934224] ata1: soft resetting link
[ 5.104446] ata1.00: configured for UDMA/100
[ 5.104470] ata1: EH complete
[ 5.108031] ata1.00: limiting speed to UDMA/66:PIO4
[ 5.108041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 5.108139] ata1.00: BMDMA stat 0x24
[ 5.108227] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 5.108231] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 5.108433] ata1.00: status: { DRDY ERR }
[ 5.108509] ata1.00: error: { ICRC ABRT }
[ 5.108605] ata1: soft resetting link
[ 5.280433] ata1.00: configured for UDMA/66
[ 5.280449] ata1: EH complete
[ 5.304192] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 5.304280] ata1.00: BMDMA stat 0x24
[ 5.304368] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 5.304372] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 5.304574] ata1.00: status: { DRDY ERR }
[ 5.304650] ata1.00: error: { ICRC ABRT }
[ 5.304748] ata1: soft resetting link
[ 5.476450] ata1.00: configured for UDMA/66
[ 5.476471] ata1: EH complete
[ 5.481870] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 5.481958] ata1.00: BMDMA stat 0x24
[ 5.482045] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 5.482049] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 5.482251] ata1.00: status: { DRDY ERR }
[ 5.482327] ata1.00: error: { ICRC ABRT }
[ 5.482423] ata1: soft resetting link
[ 5.652447] ata1.00: configured for UDMA/66
[ 5.652462] ata1: EH complete
[ 5.656215] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 5.656299] ata1.00: BMDMA stat 0x24
[ 5.656386] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 5.656390] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 5.656591] ata1.00: status: { DRDY ERR }
[ 5.656667] ata1.00: error: { ICRC ABRT }
[ 5.656762] ata1: soft resetting link
[ 5.828433] ata1.00: configured for UDMA/66
[ 5.828454] ata1: EH complete
[ 5.830561] ata1.00: limiting speed to UDMA/33:PIO4
[ 5.830570] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 5.830656] ata1.00: BMDMA stat 0x24
[ 5.830743] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in
[ 5.830746] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[ 5.830948] ata1.00: status: { DRDY ERR }
[ 5.831024] ata1.00: error: { ICRC ABRT }
[ 5.831120] ata1: soft resetting link
[ 6.000448] ata1.00: configured for UDMA/33
[ 6.000472] ata1: EH complete
[ 7.490657] udevd version 125 started
[ 9.583755] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 9.960379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.119907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.099935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.100001] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.208329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 12.208441] ACPI: Power Button [PWRF]
[ 12.208460] ACPI Error (evxfevnt-0193): Could not enable PowerButton event [20090320]
[ 12.208477] ACPI Warning (evxface-0146): Could not enable fixed event 2 [20090320]
[ 12.233278] button: probe of LNXPWRBN:00 failed with error -22
[ 12.233505] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 12.233620] ACPI: Power Button [PWRB]
[ 12.386933] Marking TSC unstable due to TSC halts in idle
[ 12.387255] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.387352] processor ACPI_CPU:00: registered as cooling_device0
[ 12.387369] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 12.388196] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 12.388265] processor ACPI_CPU:01: registered as cooling_device1
[ 12.388280] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.480584] udev: renamed network interface eth0 to eth1
[ 13.767830] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.777164] input: HDA Intel MID Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 13.777469] input: HDA Intel MID Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 13.777731] input: HDA Intel MID Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 13.777997] input: HDA Intel MID Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 13.778266] input: HDA Intel MID HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 15.760078] Clocksource tsc unstable (delta = -64379510 ns)
[ 17.481459] EXT3 FS on sda1, internal journal
[ 18.298677] loop: module loaded
[ 20.098392] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.917006] e1000e: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None
[ 21.917098] 0000:03:00.0: eth1: 10/100 speed: disabling TSO
[ 21.917335] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 32.636015] eth1: no IPv6 routers present
** Loaded modules:
Module Size Used by
loop 13316 0
snd_hda_codec_idt 49840 1
video 17980 0
output 2604 1 video
psmouse 37528 0
processor 34476 2
button 5060 0
i2c_isch 3804 0
serio_raw 4556 0
i2c_core 20840 1 i2c_isch
snd_hda_intel 22192 0
evdev 8028 0
snd_hda_codec 63520 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6104 1 snd_hda_codec
snd_pcm 62364 2 snd_hda_intel,snd_hda_codec
snd_seq 42436 0
snd_timer 17436 2 snd_pcm,snd_seq
snd_seq_device 6136 1 snd_seq
shpchp 26648 0
pci_hotplug 24400 1 shpchp
snd 49040 8 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr 2104 0
soundcore 6184 1 snd
snd_page_alloc 8180 2 snd_hda_intel,snd_pcm
ext3 107180 1
jbd 41040 1 ext3
mbcache 6924 1 ext3
usbhid 31544 0
hid 34516 1 usbhid
sd_mod 28748 2
crc_t10dif 1632 1 sd_mod
ide_pci_generic 3632 0
ide_core 88100 1 ide_pci_generic
ata_generic 4340 0
pata_sch 3184 1
e1000e 98352 0
libata 150624 2 ata_generic,pata_sch
uhci_hcd 19140 0
ehci_hcd 29660 0
scsi_mod 131604 2 sd_mod,libata
usbcore 125872 4 usbhid,uhci_hcd,ehci_hcd
thermal 12572 0
fan 4040 0
thermal_sys 13128 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec88 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Region 3: Memory at dfe60000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information <?>
00:1a.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB Client Controller [8086:8118] (rev 07) (prog-if 80 [Unspecified])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dfe5b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfe5c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: dff00000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <4us
ClockPM+ Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 1, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at eca0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ecc0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at dfe5ac00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: isch_smbus
Kernel modules: i2c-isch
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ec90 [size=16]
Kernel driver in use: pata_sch
Kernel modules: pata_sch
01:00.0 PCI bridge [0604]: Texas Instruments Device [104c:8232] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: dff00000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4161
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [90] Express (v1) Upstream Port, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 0.000000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel modules: shpchp
02:00.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: dff00000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4169
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM+ Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Kernel modules: shpchp
02:01.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4171
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM+ Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel modules: shpchp
02:02.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4179
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM+ Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel modules: shpchp
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dffc0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at fce0 [size=32]
Region 3: Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at dff80000 [disabled] [size=256K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=5
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Kernel driver in use: e1000e
Kernel modules: e1000e
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false
Reply to: