Bug#520702: Acknowledgement (Restarting Xen domU including seized Eth: disk & eth stops working)
On Sun, 22 Mar 2009, Debian Bug Tracking System wrote:
> If you wish to submit further information on this problem, please
> send it to 520702@bugs.debian.org, as before.
dom0:
<------------------------------------------------------------->
ROOT@nBoromix: ~ # lspci | f Eth
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
<------------------------------------------------------------->
/boot/grub/menu.lst:
title Xen 3.2-1-i386 / Debian GNU/Linux, kernel 2.6.26-1-xen-686
root (hd0,0)
kernel /xen-3.2-1-i386.gz
module /vmlinuz-2.6.26-1-xen-686 root=/dev/mapper/intVG-Root ro console=tty0 pciback.hide=(07:00.0)
module /initrd.img-2.6.26-1-xen-686
<------------------------------------------------------------->
ROOT@nBoromix: / # dmesg | f sei
[ 1.218959] pciback 0000:07:00.0: seizing device
<------------------------------------------------------------->
ROOT@nBoromix: / # cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto vlan200
iface vlan200 inet static
vlan-raw-device eth0
address x.x.x.x
netmask 255.255.255.128
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers x.x.x.x
dns-search x.x
auto vxbr103
iface vxbr103 inet manual
bridge_ports dummy0
bridge_maxwait 0
<------------------------------------------------------------->
ROOT@nBoromix: / # cat /etc/xen/vm/XenFW
name = 'XenFW'
kernel = '/boot/domU-kernel'
ramdisk = '/boot/domU-initrd'
memory = '500'
disk = ['phy:/dev/intVG/nBoromiXen-swap,xvda1,w',
'phy:/dev/intVG/nBoromiXen-disk,xvda2,w']
root = '/dev/xvda2 ro'
pci = ['07:00.0']
vif = ['ip=10.0.0.44,mac=00:16:3E:D3:C3:E0,bridge=vxbr103']
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
extra = 'clocksource=jiffies'
<------------------------------------------------------------->
domU:
<------------------------------------------------------------->
ROOT@nBoromiXen: ~ # dmesg|f Xtr
[ 2.705127] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008)
[ 2.726567] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:22:19:52:59:58
<------------------------------------------------------------->
ROOT@nBoromiXen: ~ # cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto vlan103
iface vlan103 inet static
vlan-raw-device eth1
address 10.0.0.44
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 10.0.0.3
dns-search x.x
<------------------------------------------------------------->
ROOT@nBoromiXen: ~ # ip li
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:16:3e:d3:c3:e0 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:22:19:52:59:58 brd ff:ff:ff:ff:ff:ff
4: vlan103@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:22:19:52:59:58 brd ff:ff:ff:ff:ff:ff
<------------------------------------------------------------->
Reply to: