Bug#388453: fails to handle interrupt
On Fri, Feb 13, 2009 at 03:42:22PM +0100, Vincent Zweije wrote:
>
> And unfortunately, it's there in the trunk snapshot as well.
>
> Ciao. Vincent.
urgs thanks for the quick feedback!
could you please file upstream in bugzilla.kernel.org
so that upstream devs have a look at it and let us know bug number.
current trunk snapshots have up to 2.6.28.4.
(2.6.28.5 died due to different reasons)
please post there the
dmesg
lspci -vvv
> [ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.28-1-686 (Debian 2.6.28-1~experimental.1~snapshot.12762) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23+1)) #1 SMP Thu Feb 12 02:12:30 UTC 2009
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] NSC Geode by NSC
> [ 0.000000] Cyrix CyrixInstead
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Transmeta GenuineTMx86
> [ 0.000000] Transmeta TransmetaCPU
> [ 0.000000] UMC UMC UMC UMC
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
> [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] last_pfn = 0x1bff0 max_arch_pfn = 0x100000
> [ 0.000000] kernel direct mapping tables up to 1bff0000 @ 7000-d000
> [ 0.000000] RAMDISK: 1b9d7000 - 1bfdf9a1
> [ 0.000000] ACPI: RSDP 000F76E0, 0014 (r0 VIAK8 )
> [ 0.000000] ACPI: RSDT 1BFF3000, 002C (r1 VIAK8 AWRDACPI 42302E31 AWRD 1010101)
> [ 0.000000] ACPI: FACP 1BFF3040, 0074 (r1 VIAK8 AWRDACPI 42302E31 AWRD 1010101)
> [ 0.000000] ACPI: DSDT 1BFF30C0, 45DC (r1 VIAK8 AWRDACPI 1000 MSFT 100000C)
> [ 0.000000] ACPI: FACS 1BFF0000, 0040
> [ 0.000000] ACPI: APIC 1BFF76C0, 005A (r1 VIAK8 AWRDACPI 42302E31 AWRD 1010101)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 447MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 1bff0000
> [ 0.000000] low ram: 00000000 - 1bff0000
> [ 0.000000] bootmap 00002000 - 00005800
> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bff0000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> [ 0.000000] #3 [0000100000 - 000047a5c4] TEXT DATA BSS ==> [0000100000 - 000047a5c4]
> [ 0.000000] #4 [001b9d7000 - 001bfdf9a1] RAMDISK ==> [001b9d7000 - 001bfdf9a1]
> [ 0.000000] #5 [000047b000 - 000047e000] INIT_PG_TABLE ==> [000047b000 - 000047e000]
> [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
> [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
> [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
> [ 0.000000] found SMP MP-table at [c00f5a50] 000f5a50
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x0001bff0
> [ 0.000000] HighMem 0x0001bff0 -> 0x0001bff0
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0001bff0
> [ 0.000000] On node 0 totalpages: 114575
> [ 0.000000] free_area_init_node: node 0, pgdat c03a4180, node_mem_map c1000000
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
> [ 0.000000] Normal zone: 864 pages used for memmap
> [ 0.000000] Normal zone: 109712 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 0 pages used for memmap
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
> [ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
> [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113679
> [ 0.000000] Kernel command line: root=/dev/hda7 ro
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 1808.501 MHz processor.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.004000] Memory: 444252k/458688k available (1899k kernel code, 13816k reserved, 902k data, 320k init, 0k highmem)
> [ 0.004000] virtual kernel memory layout:
> [ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
> [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.004000] vmalloc : 0xdc7f0000 - 0xff7fe000 ( 560 MB)
> [ 0.004000] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
> [ 0.004000] .init : 0xc03c3000 - 0xc0413000 ( 320 kB)
> [ 0.004000] .data : 0xc02daea6 - 0xc03bc9bc ( 902 kB)
> [ 0.004000] .text : 0xc0100000 - 0xc02daea6 (1899 kB)
> [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3617.00 BogoMIPS (lpj=7234004)
> [ 0.004137] Security Framework initialized
> [ 0.004187] SELinux: Disabled at boot.
> [ 0.004245] Mount-cache hash table entries: 512
> [ 0.004411] Initializing cgroup subsys ns
> [ 0.004460] Initializing cgroup subsys cpuacct
> [ 0.004508] Initializing cgroup subsys devices
> [ 0.004556] Initializing cgroup subsys freezer
> [ 0.004618] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004670] CPU: L2 Cache: 128K (64 bytes/line)
> [ 0.004719] Intel machine check architecture supported.
> [ 0.004768] Intel machine check reporting enabled on CPU#0.
> [ 0.004828] Checking 'hlt' instruction... OK.
> [ 0.020295] SMP alternatives: switching to UP code
> [ 0.125141] Freeing SMP alternatives: 10k freed
> [ 0.125196] ACPI: Core revision 20080926
> [ 0.132880] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> [ 0.172719] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
> [ 0.176001] Brought up 1 CPUs
> [ 0.176001] Total of 1 processors activated (3617.00 BogoMIPS).
> [ 0.176001] CPU0 attaching NULL sched-domain.
> [ 0.176001] net_namespace: 776 bytes
> [ 0.176001] Booting paravirtualized kernel on bare hardware
> [ 0.176001] regulator: core version 0.5
> [ 0.176001] NET: Registered protocol family 16
> [ 0.176001] ACPI: bus type pci registered
> [ 0.176001] PCI: PCI BIOS revision 2.10 entry at 0xfbae0, last bus=1
> [ 0.176001] PCI: Using configuration type 1 for base access
> [ 0.176001] ACPI: EC: Look up EC in DSDT
> [ 0.178601] ACPI Warning (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated
> [ 0.178702] [20080926]
> [ 0.181460] ACPI: Interpreter enabled
> [ 0.181515] ACPI: (supports S0 S3 S4 S5)
> [ 0.181706] ACPI: Using IOAPIC for interrupt routing
> [ 0.187225] ACPI: No dock devices found.
> [ 0.187290] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.187422] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
> [ 0.187654] pci 0000:00:01.0: supports D1
> [ 0.187694] pci 0000:00:0f.0: reg 10 io port: [0x9000-0x9007]
> [ 0.187701] pci 0000:00:0f.0: reg 14 io port: [0x9400-0x9403]
> [ 0.187707] pci 0000:00:0f.0: reg 18 io port: [0x9800-0x9807]
> [ 0.187713] pci 0000:00:0f.0: reg 1c io port: [0x9c00-0x9c03]
> [ 0.187720] pci 0000:00:0f.0: reg 20 io port: [0xa000-0xa00f]
> [ 0.187726] pci 0000:00:0f.0: reg 24 io port: [0xa400-0xa4ff]
> [ 0.187781] pci 0000:00:0f.1: reg 20 io port: [0xa800-0xa80f]
> [ 0.187842] pci 0000:00:10.0: reg 20 io port: [0xac00-0xac1f]
> [ 0.187858] pci 0000:00:10.0: supports D1 D2
> [ 0.187861] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.187913] pci 0000:00:10.0: PME# disabled
> [ 0.188045] pci 0000:00:10.1: reg 20 io port: [0xb000-0xb01f]
> [ 0.188060] pci 0000:00:10.1: supports D1 D2
> [ 0.188063] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.188114] pci 0000:00:10.1: PME# disabled
> [ 0.188201] pci 0000:00:10.2: reg 20 io port: [0xb400-0xb41f]
> [ 0.188217] pci 0000:00:10.2: supports D1 D2
> [ 0.188219] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.188271] pci 0000:00:10.2: PME# disabled
> [ 0.188357] pci 0000:00:10.3: reg 20 io port: [0xb800-0xb81f]
> [ 0.188373] pci 0000:00:10.3: supports D1 D2
> [ 0.188375] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.188427] pci 0000:00:10.3: PME# disabled
> [ 0.188499] pci 0000:00:10.4: reg 10 32bit mmio: [0xde000000-0xde0000ff]
> [ 0.188529] pci 0000:00:10.4: supports D1 D2
> [ 0.188531] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.188583] pci 0000:00:10.4: PME# disabled
> [ 0.188681] HPET not enabled in BIOS. You might try hpet=force boot option
> [ 0.188768] pci 0000:00:11.5: reg 10 io port: [0xbc00-0xbcff]
> [ 0.188799] pci 0000:00:11.5: supports D1 D2
> [ 0.188829] pci 0000:00:13.0: reg 10 io port: [0xc000-0xc0ff]
> [ 0.188835] pci 0000:00:13.0: reg 14 32bit mmio: [0xde001000-0xde0010ff]
> [ 0.188862] pci 0000:00:13.0: supports D1 D2
> [ 0.188864] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.188916] pci 0000:00:13.0: PME# disabled
> [ 0.189054] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]
> [ 0.189060] pci 0000:01:00.0: reg 14 32bit mmio: [0xdc000000-0xdcffffff]
> [ 0.189074] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
> [ 0.189080] pci 0000:01:00.0: supports D1 D2
> [ 0.189109] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
> [ 0.189114] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdbffffff]
> [ 0.189122] bus 00 -> node 0
> [ 0.189131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.229608] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
> [ 0.230109] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
> [ 0.230630] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
> [ 0.231104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> [ 0.231643] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> [ 0.232180] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> [ 0.232714] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> [ 0.233248] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> [ 0.233843] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
> [ 0.234211] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
> [ 0.234596] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
> [ 0.234962] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
> [ 0.235626] PCI: Using ACPI for IRQ routing
> [ 0.235801] pnp: PnP ACPI init
> [ 0.235801] ACPI: bus type pnp registered
> [ 0.239766] pnp: PnP ACPI: found 13 devices
> [ 0.239819] ACPI: ACPI bus type pnp unregistered
> [ 0.239870] PnPBIOS: Disabled by ACPI PNP
> [ 0.239930] system 00:00: iomem range 0xcc000-0xd3fff has been reserved
> [ 0.239994] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
> [ 0.240045] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
> [ 0.240097] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
> [ 0.240149] system 00:00: iomem range 0x1bff0000-0x1bffffff could not be reserved
> [ 0.241089] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
> [ 0.241141] system 00:00: iomem range 0x0-0x9ffff could not be reserved
> [ 0.241192] system 00:00: iomem range 0x100000-0x1bfeffff could not be reserved
> [ 0.241253] system 00:00: iomem range 0x1c000000-0x1fffffff has been reserved
> [ 0.241305] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
> [ 0.241356] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
> [ 0.241408] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
> [ 0.241464] system 00:02: ioport range 0x4000-0x407f has been reserved
> [ 0.241515] system 00:02: ioport range 0x40f0-0x40ff has been reserved
> [ 0.241565] system 00:02: ioport range 0x5000-0x500f has been reserved
> [ 0.241620] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.241670] system 00:03: ioport range 0x290-0x29f has been reserved
> [ 0.241720] system 00:03: ioport range 0x800-0x805 has been reserved
> [ 0.276723] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> [ 0.276776] pci 0000:00:01.0: IO window: disabled
> [ 0.276827] pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff
> [ 0.276879] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
> [ 0.276949] pci 0000:00:01.0: setting latency timer to 64
> [ 0.276953] bus: 00 index 0 io port: [0x00-0xffff]
> [ 0.277001] bus: 00 index 1 mmio: [0x000000-0xffffffff]
> [ 0.277050] bus: 01 index 0 mmio: [0x0-0x0]
> [ 0.277097] bus: 01 index 1 mmio: [0xdc000000-0xddffffff]
> [ 0.277146] bus: 01 index 2 mmio: [0xd8000000-0xdbffffff]
> [ 0.277195] bus: 01 index 3 mmio: [0x0-0x0]
> [ 0.277269] NET: Registered protocol family 2
> [ 0.277403] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.277540] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.277707] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.277892] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.277943] TCP reno registered
> [ 0.278088] NET: Registered protocol family 1
> [ 0.278260] checking if image is initramfs... it is
> [ 0.779962] Switched to high resolution mode on CPU 0
> [ 0.799718] Freeing initrd memory: 6178k freed
> [ 0.800420] audit: initializing netlink socket (disabled)
> [ 0.800486] type=2000 audit(1234535569.800:1): initialized
> [ 0.800621] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 0.800739] VFS: Disk quotas dquot_6.5.1
> [ 0.800796] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.800898] msgmni has been set to 880
> [ 0.801031] alg: No test for stdrng (krng)
> [ 0.801145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.801207] io scheduler noop registered
> [ 0.801253] io scheduler anticipatory registered
> [ 0.801301] io scheduler deadline registered
> [ 0.801357] io scheduler cfq registered (default)
> [ 0.801421] PCI: VIA PCI bridge detected.Disabling DAC.
> [ 0.801553] pci 0000:01:00.0: Boot video device
> [ 0.805180] isapnp: Scanning for PnP cards...
> [ 1.159123] isapnp: No Plug & Play device found
> [ 1.161665] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 1.161829] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.161988] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 1.162401] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.162610] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 1.164140] brd: module loaded
> [ 1.164271] Fixed MDIO Bus: probed
> [ 1.164402] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 1.164882] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.164933] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.165125] mice: PS/2 mouse device common for all mice
> [ 1.165241] rtc_cmos 00:05: RTC can wake from S4
> [ 1.165359] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 1.165455] rtc0: alarms up to one year, y3k, 242 bytes nvram
> [ 1.165533] cpuidle: using governor ladder
> [ 1.165581] cpuidle: using governor menu
> [ 1.165630] No iBFT detected.
> [ 1.165776] TCP cubic registered
> [ 1.165823] NET: Registered protocol family 17
> [ 1.165915] Using IPI No-Shortcut mode
> [ 1.166085] registered taskstats version 1
> [ 1.166279] rtc_cmos 00:05: setting system clock to 2009-02-13 14:32:50 UTC (1234535570)
> [ 1.166687] Freeing unused kernel memory: 320k freed
> [ 1.205270] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 1.284683] processor ACPI_CPU:00: registered as cooling_device0
> [ 1.778408] Uniform Multi-Platform E-IDE driver
> [ 1.809751] SCSI subsystem initialized
> [ 1.832928] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
> [ 1.832985] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
> [ 1.833339] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
> [ 1.833392] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
> [ 1.833447] VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
> [ 1.833532] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
> [ 1.833597] ide0: BM-DMA at 0xa800-0xa807
> [ 1.833651] ide1: BM-DMA at 0xa808-0xa80f
> [ 1.833701] Probing IDE interface ide0...
> [ 1.948113] usbcore: registered new interface driver usbfs
> [ 1.948195] usbcore: registered new interface driver hub
> [ 1.948288] usbcore: registered new device driver usb
> [ 1.950559] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.957385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.957441] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
> [ 1.972027] libata version 3.00 loaded.
> [ 2.005141] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 2.256118] hda: ST3200826A, ATA DISK drive
> [ 2.928056] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> [ 2.928140] hda: UDMA/100 mode selected
> [ 2.928254] Probing IDE interface ide1...
> [ 3.792096] hdc: _NEC DVD_RW ND-3530A, ATAPI CD/DVD-ROM drive
> [ 4.464056] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> [ 4.464193] hdc: UDMA/33 mode selected
> [ 4.464609] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 4.466137] ide1 at 0x170-0x177,0x376 on irq 15
> [ 4.467790] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
> [ 4.467845] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
> [ 4.467900] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
> [ 4.467974] uhci_hcd 0000:00:10.0: UHCI Host Controller
> [ 4.468085] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> [ 4.468188] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00
> [ 4.468341] usb usb1: configuration #1 chosen from 1 choice
> [ 4.468415] hub 1-0:1.0: USB hub found
> [ 4.468469] hub 1-0:1.0: 2 ports detected
> [ 4.468611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.468662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.468722] usb usb1: Product: UHCI Host Controller
> [ 4.468770] usb usb1: Manufacturer: Linux 2.6.28-1-686 uhci_hcd
> [ 4.468820] usb usb1: SerialNumber: 0000:00:10.0
> [ 4.468904] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
> [ 4.469042] ehci_hcd 0000:00:10.4: EHCI Host Controller
> [ 4.469120] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
> [ 4.469218] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde000000
> [ 4.480017] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
> [ 4.480174] usb usb2: configuration #1 chosen from 1 choice
> [ 4.480249] hub 2-0:1.0: USB hub found
> [ 4.480307] hub 2-0:1.0: 8 ports detected
> [ 4.480457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.480509] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.480570] usb usb2: Product: EHCI Host Controller
> [ 4.480618] usb usb2: Manufacturer: Linux 2.6.28-1-686 ehci_hcd
> [ 4.480668] usb usb2: SerialNumber: 0000:00:10.4
> [ 4.481077] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
> [ 4.484485] 8139too Fast Ethernet driver 0.9.28
> [ 4.484579] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
> [ 4.484650] uhci_hcd 0000:00:10.1: UHCI Host Controller
> [ 4.484743] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
> [ 4.484826] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
> [ 4.484973] usb usb3: configuration #1 chosen from 1 choice
> [ 4.485049] hub 3-0:1.0: USB hub found
> [ 4.485101] hub 3-0:1.0: 2 ports detected
> [ 4.485232] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.485285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.485346] usb usb3: Product: UHCI Host Controller
> [ 4.485394] usb usb3: Manufacturer: Linux 2.6.28-1-686 uhci_hcd
> [ 4.485444] usb usb3: SerialNumber: 0000:00:10.1
> [ 4.489906] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 4.490394] eth0: RealTek RTL8139 at 0xc000, 00:14:85:47:20:98, IRQ 18
> [ 4.490445] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> [ 4.490788] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
> [ 4.490860] uhci_hcd 0000:00:10.2: UHCI Host Controller
> [ 4.490948] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
> [ 4.491030] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
> [ 4.491177] usb usb4: configuration #1 chosen from 1 choice
> [ 4.491251] hub 4-0:1.0: USB hub found
> [ 4.491304] hub 4-0:1.0: 2 ports detected
> [ 4.491432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.491484] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.491545] usb usb4: Product: UHCI Host Controller
> [ 4.491594] usb usb4: Manufacturer: Linux 2.6.28-1-686 uhci_hcd
> [ 4.491644] usb usb4: SerialNumber: 0000:00:10.2
> [ 4.491714] sata_via 0000:00:0f.0: version 2.4
> [ 4.491726] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
> [ 4.491829] sata_via 0000:00:0f.0: routed to hard irq line 11
> [ 4.493420] scsi0 : sata_via
> [ 4.495207] scsi1 : sata_via
> [ 4.495323] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 20
> [ 4.495375] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 20
> [ 4.514100] ide-gd driver 1.18
> [ 4.514173] hda: max request size: 512KiB
> [ 4.528969] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
> [ 4.529205] hda: cache flushes supported
> [ 4.529312] hda:<6>ide-cd driver 5.00
> [ 4.545129] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
> [ 4.593825] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> [ 4.594071] Uniform CD-ROM driver Revision: 3.20
> [ 4.697215] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> [ 4.900010] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> [ 4.900463] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
> [ 4.900537] uhci_hcd 0000:00:10.3: UHCI Host Controller
> [ 4.900627] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
> [ 4.900712] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
> [ 4.900861] usb usb5: configuration #1 chosen from 1 choice
> [ 4.900938] hub 5-0:1.0: USB hub found
> [ 4.900991] hub 5-0:1.0: 2 ports detected
> [ 4.901126] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.901178] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.901239] usb usb5: Product: UHCI Host Controller
> [ 4.901288] usb usb5: Manufacturer: Linux 2.6.28-1-686 uhci_hcd
> [ 4.901338] usb usb5: SerialNumber: 0000:00:10.3
> [ 5.108016] usb 4-1: new full speed USB device using uhci_hcd and address 2
> [ 5.274787] PM: Starting manual resume from disk
> [ 5.285218] usb 4-1: configuration #1 chosen from 1 choice
> [ 5.290373] usb 4-1: New USB device found, idVendor=058f, idProduct=9360
> [ 5.290428] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 5.290480] usb 4-1: Product: USB Reader
> [ 5.290526] usb 4-1: Manufacturer:
> [ 5.290572] usb 4-1: SerialNumber: 2004888
> [ 5.334991] Initializing USB Mass Storage driver...
> [ 5.347567] scsi2 : SCSI emulation for USB Mass Storage devices
> [ 5.357394] usbcore: registered new interface driver usb-storage
> [ 5.357452] USB Mass Storage support registered.
> [ 5.357809] usb-storage: device found at 2
> [ 5.357812] usb-storage: waiting for device to settle before scanning
> [ 5.369552] kjournald starting. Commit interval 5 seconds
> [ 5.369619] EXT3-fs: mounted filesystem with ordered data mode.
> [ 5.400860] usb 5-1: new low speed USB device using uhci_hcd and address 2
> [ 5.594840] usb 5-1: configuration #1 chosen from 1 choice
> [ 5.597964] usb 5-1: New USB device found, idVendor=0458, idProduct=0048
> [ 5.598019] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 5.598071] usb 5-1: Product: Wireless Keyboard & Mouse
> [ 5.598120] usb 5-1: Manufacturer: KYE Systems Corp.
> [ 6.575585] udevd version 125 started
> [ 7.321376] Linux agpgart interface v0.103
> [ 7.362409] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
> [ 7.366762] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
> [ 7.606529] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 7.634009] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 7.765085] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 7.784016] ACPI: Power Button (FF) [PWRF]
> [ 7.784165] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> [ 7.796017] ACPI: Power Button (CM) [PWRB]
> [ 8.010596] parport_pc 00:0a: reported by Plug and Play ACPI
> [ 8.010718] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> [ 9.234459] usbcore: registered new interface driver hiddev
> [ 9.249901] input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input3
> [ 9.264095] generic-usb 0003:0458:0048.0001: input,hidraw0: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.3-1/input0
> [ 9.286088] input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.1/input/input4
> [ 9.316128] generic-usb 0003:0458:0048.0002: input,hidraw1: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.3-1/input1
> [ 9.316219] usbcore: registered new interface driver usbhid
> [ 9.316269] usbhid: v2.6:USB HID core driver
> [ 9.553619] input: PC Speaker as /devices/platform/pcspkr/input/input5
> [ 9.977060] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
> [ 9.977117] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
> [ 9.977173] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
> [ 9.977391] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
> [ 10.288897] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
> [ 10.372033] usb-storage: device scan complete
> [ 10.375730] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
> [ 10.378744] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
> [ 10.381718] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
> [ 10.384720] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
> [ 11.568249] Driver 'sd' needs updating - please use bus_type methods
> [ 11.573758] sd 2:0:0:0: [sda] Attached SCSI removable disk
> [ 11.578734] sd 2:0:0:1: [sdb] Attached SCSI removable disk
> [ 11.583733] sd 2:0:0:2: [sdc] Attached SCSI removable disk
> [ 11.589010] sd 2:0:0:3: [sdd] Attached SCSI removable disk
> [ 12.381706] Adding 987956k swap on /dev/hda5. Priority:-1 extents:1 across:987956k
> [ 12.670763] EXT3 FS on hda7, internal journal
> [ 13.634926] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> [ 13.731979] device-mapper: uevent: version 1.0.3
> [ 13.733620] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
> [ 14.269686] kjournald starting. Commit interval 5 seconds
> [ 14.269886] EXT3 FS on hda6, internal journal
> [ 14.269967] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.282430] kjournald starting. Commit interval 5 seconds
> [ 14.282656] EXT3 FS on hda10, internal journal
> [ 14.282736] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.294530] kjournald starting. Commit interval 5 seconds
> [ 14.294746] EXT3 FS on hda8, internal journal
> [ 14.294826] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.308854] kjournald starting. Commit interval 5 seconds
> [ 14.309043] EXT3 FS on hda9, internal journal
> [ 14.309123] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.455013] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 14.772703] NTFS driver 2.1.29 [Flags: R/W MODULE].
> [ 14.967764] NTFS volume version 3.1.
> [ 15.136780] NTFS volume version 3.1.
> [ 16.279181] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> [ 18.045911] NET: Registered protocol family 10
> [ 18.046102] lo: Disabled Privacy Extensions
> [ 21.606637] usbcore: registered new interface driver usblp
> [ 21.800850] lp0: using parport0 (interrupt-driven).
> [ 21.827404] ppdev: user-space parallel port driver
> [ 25.688053] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
> [ 28.580017] eth0: no IPv6 routers present
> [ 31.787940] [drm] Initialized drm 1.1.0 20060810
> [ 31.811084] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 31.811244] [drm] Initialized via 2.11.1 20070202 on minor 0
> [ 31.843844] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
> [ 31.843861] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
> [ 31.843868] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
> [ 31.843930] pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [ 32.318292] irq 16: nobody cared (try booting with the "irqpoll" option)
> [ 32.318299] Pid: 2514, comm: debtorrent-clie Not tainted 2.6.28-1-686 #1
> [ 32.318302] Call Trace:
> [ 32.318311] [<c0157ffa>] __report_bad_irq+0x24/0x69
> [ 32.318316] [<c0158001>] __report_bad_irq+0x2b/0x69
> [ 32.318320] [<c015812c>] note_interrupt+0xed/0x131
> [ 32.318324] [<c01572e6>] handle_IRQ_event+0x23/0x51
> [ 32.318328] [<c015882c>] handle_fasteoi_irq+0x86/0xaa
> [ 32.318332] [<c0105b87>] do_IRQ+0x67/0x7c
> [ 32.318336] [<c0104473>] common_interrupt+0x23/0x28
> [ 32.318338] handlers:
> [ 32.318339] [<dca443e4>] (via_driver_irq_handler+0x0/0x13d [via])
> [ 32.318350] Disabling IRQ #16
> --
> Vincent Zweije <zweije@xs4all.nl> | "If you're flamed in a group you
> <http://www.xs4all.nl/~zweije/> | don't read, does anybody get burnt?"
> [Xhost should be taken out and shot] | -- Paul Tomblin on a.s.r.
Reply to: