Bug#432468: closed by maximilian attems <max@stro.at> (re: linux-image-2.6.17-2-686: suspend to {disk, mem} fails on toshiba satellite A30)
AFAIK it still does not work even with the very latest kernels, but I
no longer use this laptop and do not care whether the bug remains
open.
zw
On Thu, Feb 12, 2009 at 2:36 PM, Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
>
> This is an automatic notification regarding your Bug report
> which was filed against the linux-2.6 package:
>
> #390040: does not resume from suspend-to-RAM on toshiba satellite m70
>
> It has been closed by maximilian attems <max@stro.at>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact maximilian attems <max@stro.at> by
> replying to this email.
>
>
> --
> 390040: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=390040
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
> ---------- Forwarded message ----------
> From: maximilian attems <max@stro.at>
> To: 390040-done@bugs.debian.org
> Date: Thu, 12 Feb 2009 23:34:32 +0100
> Subject: re: linux-image-2.6.17-2-686: suspend to {disk, mem} fails on toshiba satellite A30
> Version: 2.6.26-1
>
>> suspend to disk works in 2.6.19-1-686. suspend to ram works a bit
>> better, but not quite there.
>
> thanks for reporting, as no activity since i'd guess that
> it happen to work since. if not please reopen.
>
> thanks for report.
>
> --
> maks
>
>
>
> ---------- Forwarded message ----------
> From: Zack Weinberg <zackw@panix.com>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Date: Mon, 09 Jul 2007 21:28:15 -0700
> Subject: does not resume from suspend-to-RAM on toshiba satellite m70
> Package: linux-image-2.6.21-2-686
> Version: 2.6.21-5
> Severity: normal
>
> My laptop - a Toshiba Satellite M70 [I believe this was a model sold only
> in Canada, not that that stopped Newegg from selling it to me ;-)] suspends
> to RAM just fine, but never comes back. I have experimented extensively
> with 'pm-suspend' -- the behavior is always the same: when I push the
> power button or reopen the lid, the power light goes from blinking to solid,
> the fan turns on, the hard drive spins up, and then nothing. The screen
> remains blank, the backlight off, and the keyboard unresponsive.
> The only way to get it out of this state is to hold down the power button
> until the computer turns off, and then turn it back on.
>
> Yes, I am using the closed-source Atheros drivers for the wireless modem,
> but the symptoms are exactly the same even if that driver has never been
> loaded. In fact, the symptoms are exactly the same even if I do
> "echo mem > /sys/power/state" from an init=/bin/sh boot with only the
> IDE drivers and dm-crypt (my HD is encrypted) loaded.
>
> I cannot be sure, but the appearance is that user space is never reactivated.
>
> -- Package-specific info:
> ** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-5) (waldi@debian.org) (gcc version 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #1 SMP Mon Jun 25 20:53:36 UTC 2007
>
> ** Tainted: PFSRMB
>
> ** Kernel log:
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0214000-d02147ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ATIIXP: IDE controller at PCI slot 0000:00:14.1
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> ATIIXP: chipset revision 128
> ATIIXP: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> Time: acpi_pm clocksource has been installed.
> hda: HTS541080G9AT00, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> Clocksource tsc unstable (delta = -127628599 ns)
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6180400ef5]
> hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 19
> eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:dc:00:01, IRQ 19
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> hda: max request size: 512KiB
> hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
> hda: cache flushes supported
> hda: hda1 hda2 < hda5 >
> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
> Attempting manual resume
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
> Linux agpgart interface v0.102 (c) Dave Jones
> Real Time Clock Driver v1.12ac
> input: PC Speaker as /class/input/input1
> input: PS/2 Mouse as /class/input/input2
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
> ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
> atiixp: codec reset timeout
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> wlan: 0.8.4.2 (0.9.3)
> ath_pci: 0.9.4.5 (0.9.3)
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
> ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21
> ath_rate_sample: 1.2 (0.9.3)
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: mac 7.8 phy 4.5 radio 5.6
> wifi0: Use hw queue 1 for WME_AC_BE traffic
> wifi0: Use hw queue 0 for WME_AC_BK traffic
> wifi0: Use hw queue 2 for WME_AC_VI traffic
> wifi0: Use hw queue 3 for WME_AC_VO traffic
> wifi0: Use hw queue 8 for CAB traffic
> wifi0: Use hw queue 9 for beacons
> wifi0: Atheros 5212: mem=0xd0200000, irq=21
> Yenta: CardBus bridge found at 0000:04:04.0 [1179:ff00]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:04:04.0, mfunc 0x00111c12, devctl 0x44
> Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
> Socket status: 30000006
> Yenta: Raising subordinate bus# of parent bus (#04) from #04 to #08
> pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
> cs: IO port probe 0xa000-0xafff: clean.
> pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
> pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0x3e0-0x4ff: clean.
> cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
> cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
> cs: IO port probe 0xa00-0xaff: clean.
> EXT3 FS on dm-1, internal journal
> loop: loaded (max 8 devices)
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 1351672k swap on /dev/mapper/boheme-swap_1. Priority:-1 extents:1 across:1351672k
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: AC Adapter [ACAD] (on-line)
> input: Power Button (FF) as /class/input/input4
> ACPI: Power Button (FF) [PWRF]
> input: Lid Switch as /class/input/input5
> ACPI: Lid Switch [LID]
> input: Power Button (CM) as /class/input/input6
> ACPI: Power Button (CM) [PWRB]
> lp: driver loaded but no devices found
> ppdev: user-space parallel port driver
> eth0: link down
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
> ath0: no IPv6 routers present
>
> ** Loaded modules:
> Module Size Used by
> wlan_tkip 11680 2
> binfmt_misc 10984 1
> ppdev 8580 0
> parport_pc 32740 0
> lp 10884 0
> parport 33672 3 ppdev,parport_pc,lp
> button 7952 0
> ac 5220 0
> battery 10020 0
> ipv6 236256 10
> cpufreq_conservative 6888 0
> cpufreq_ondemand 7884 0
> cpufreq_powersave 1792 0
> cpufreq_stats 5120 0
> cpufreq_userspace 4128 0
> freq_table 4512 2 cpufreq_ondemand,cpufreq_stats
> sbp2 21188 0
> loop 15880 0
> pcmcia 35276 0
> firmware_class 9408 1 pcmcia
> wlan_scan_sta 12416 1
> ath_rate_sample 11712 1
> joydev 9152 0
> tsdev 7520 0
> yenta_socket 24876 1
> rsrc_nonstatic 11968 1 yenta_socket
> pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic
> snd_atiixp_modem 15368 0
> snd_pcm_oss 39168 0
> snd_mixer_oss 15328 1 snd_pcm_oss
> ath_pci 88096 0
> wlan 182468 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
> ath_hal 191408 3 ath_rate_sample,ath_pci
> shpchp 30996 0
> pci_hotplug 29088 1 shpchp
> snd_atiixp 19084 0
> snd_ac97_codec 92356 2 snd_atiixp_modem,snd_atiixp
> serio_raw 6564 0
> ac97_bus 2272 1 snd_ac97_codec
> i2c_piix4 8556 0
> snd_pcm 71940 4 snd_atiixp_modem,snd_pcm_oss,snd_atiixp,snd_ac97_codec
> snd_timer 20868 1 snd_pcm
> pcspkr 3136 0
> rtc 12760 0
> ati_agp 8748 0
> agpgart 32168 1 ati_agp
> snd 48132 7 snd_atiixp_modem,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
> soundcore 7424 1 snd
> evdev 9216 4
> i2c_core 20480 1 i2c_piix4
> psmouse 34952 0
> snd_page_alloc 9512 3 snd_atiixp_modem,snd_atiixp,snd_pcm
> eth1394 18276 0
> ext3 120904 3
> jbd 55208 1 ext3
> mbcache 8164 1 ext3
> sha256 11008 0
> aes 27680 2
> cbc 4256 1
> blkcipher 5956 1 cbc
> dm_crypt 12808 1
> ide_generic 1344 0 [permanent]
> dm_mirror 20116 0
> dm_snapshot 16420 0
> dm_mod 52556 12 dm_crypt,dm_mirror,dm_snapshot
> ide_cd 36512 0
> cdrom 32768 1 ide_cd
> ide_disk 15648 3
> 8139cp 22336 0
> atiixp 6032 0 [permanent]
> generic 4804 0 [permanent]
> ide_core 115016 5 ide_generic,ide_cd,ide_disk,atiixp,generic
> 8139too 25536 0
> mii 5280 2 8139cp,8139too
> ohci1394 32432 0
> ieee1394 89560 3 sbp2,eth1394,ohci1394
> ehci_hcd 30796 0
> ata_generic 8100 0
> libata 109172 1 ata_generic
> scsi_mod 133740 2 sbp2,libata
> ohci_hcd 19684 0
> usbcore 123272 3 ehci_hcd,ohci_hcd
> thermal 14120 0
> processor 30888 1 thermal
> fan 4868 0
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:5a31] (rev 01)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
>
> 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: d0100000-d01fffff
> Prefetchable memory behind bridge: d8000000-dfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36] (prog-if 00 [Normal decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d0005000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 81)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Region 0: I/O ports at 8400 [size=16]
> Region 1: Memory at d0007000 (32-bit, non-prefetchable) [size=1K]
>
> 00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI [1002:4376] (rev 80) (prog-if 8a [Master SecP PriP])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 8410 [size=16]
> Capabilities: <access denied>
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=04, subordinate=08, sec-latency=64
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: d0200000-d02fffff
> Prefetchable memory behind bridge: 20000000-23ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>
> 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 80)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min), Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at d0007400 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 00:14.6 Modem [0703]: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller [1002:4378] (rev 80) (prog-if 00 [Generic])
> Subsystem: Toshiba America Info Systems Unknown device [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min), Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at d0007800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62] (prog-if 00 [VGA])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 66 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 9000 [size=256]
> Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
> Capabilities: <access denied>
>
> 04:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d0214000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at d0210000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 04:02.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5005G 802.11abg NIC [168c:001a] (rev 01)
> Subsystem: Askey Computer Corp. Unknown device [144f:7094]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
>
> 04:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d0215000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
> Memory window 0: 20000000-23fff000 (prefetchable)
> Memory window 1: 24000000-27fff000
> I/O window 0: 0000a400-0000a4ff
> I/O window 1: 0000a800-0000a8ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
>
> 04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at a000 [size=256]
> Region 1: Memory at d0214800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
>
>
> -- System Information:
> Debian Release: lenny/sid
> APT prefers unstable
> APT policy: (500, 'unstable'), (1, 'experimental')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core)
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.21-2-686 depends on:
> ii initramfs-tools [linux-initr 0.89 tools for generating an initramfs
> ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.21-2-686 recommends:
> ii libc6-i686 2.5-11 GNU C Library: Shared libraries [i
>
> -- debconf information:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk:
> linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686:
> linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false
> linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686:
> linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/kimage-is-a-directory:
> linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false
> linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686:
>
>
>
Reply to: