--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.24-1-686: cdrom nonfunctional, spews errors on boot
- From: Zack Weinberg <zackw@panix.com>
- Date: Fri, 16 May 2008 13:14:11 -0400
- Message-id: <20080516171411.2309.53431.reportbug@whistle-tree>
Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal
I just upgraded from etch to lenny in order to get at some new software,
but now the CD/DVD drive doesn't work. There is a flood of errors on
boot, including a couple of soft-lockup traces, all apparently having
something to do with hdc (the cdrom). If I put a disc in the drive
and try to mount it, the command hangs and I get more IDE errors and
soft-lockup traces. (The mount command does eventually give up; it's
not a permanent hang.)
I've chopped the dmesg down to what appear to be the critical pieces,
please let me know if you need more information.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008
** Command line:
auto BOOT_IMAGE=Linux ro root=301
** Not tainted
** Kernel log:
ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD3200AAKB-00WHA0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
hda: cache flushes supported
hda: hda1 hda2
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: ATAPI CD-ROM drive, 0kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000212 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: fffeee00 ESP: f66cfb30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f88ad498>] cdrom_read_capacity+0x57/0x85 [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae1d3>] cdrom_read_toc+0x94/0x3ff [ide_cd]
[<f889a7bf>] __ide_add_setting+0xb6/0xd3 [ide_core]
[<f889ab09>] ide_add_setting+0x48/0x4d [ide_core]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: fffef7c6 ESP: f66cfb38
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f88ad436>] cdrom_read_tocentry+0x93/0x9e [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae2e7>] cdrom_read_toc+0x1a8/0x3ff [ide_cd]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659]
Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: ffff066f ESP: f66cfa8c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88b8fac>] cdrom_get_disc_info+0x6c/0x79 [cdrom]
[<f88b9085>] cdrom_get_last_written+0x2e/0x106 [cdrom]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88ae4d7>] cdrom_read_toc+0x398/0x3ff [ide_cd]
[<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<c012c7c0>] msleep+0x0/0x12
[<c0103ed6>] syscall_call+0x7/0xb
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
# ... several dozen more "status timeout" messages
# on attempting to mount a disc:
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup - CPU#1 stuck for 11s! [mount:2368]
Pid: 2368, comm: mount Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8893dfb>] EFLAGS: 00200202 CPU: 1
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00200282 ECX: 00000000 EDX: 00000177
ESI: f88a75f8 EDI: f88a75a0 EBP: 0003d1d5 ESP: f698bb00
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e81f00 CR3: 366e5000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f8894262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<c01d5eec>] blk_put_request+0x22/0x36
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c01a5e58>] pid_revalidate+0x5a/0xc5
[<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f88ad59c>] cdrom_check_status+0x55/0x60 [ide_cd]
[<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f88bbc76>] cdrom_open+0x35f/0x915 [cdrom]
[<c0180ad0>] link_path_walk+0xa9/0xb3
[<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs]
[<c01872e4>] __d_lookup+0x91/0xe5
[<c017ea42>] do_lookup+0x4f/0x140
[<c0186ae0>] dput+0x15/0xdc
[<c0180904>] __link_path_walk+0xa28/0xb4b
[<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs]
[<c01872e4>] __d_lookup+0x91/0xe5
[<c018a8fe>] mntput_no_expire+0x11/0x66
[<c0180ad0>] link_path_walk+0xa9/0xb3
[<c01d9750>] exact_lock+0x7/0xd
[<c0243196>] kobj_lookup+0xe4/0x10e
[<f88adedf>] idecd_open+0x78/0x8c [ide_cd]
[<c0198481>] do_open+0x87/0x255
[<c01987dd>] blkdev_open+0x0/0x4d
[<c0198802>] blkdev_open+0x25/0x4d
[<c0176ecb>] __dentry_open+0xce/0x185
[<c0176ffc>] nameidata_to_filp+0x24/0x33
[<c017703d>] do_filp_open+0x32/0x39
[<c0176d89>] get_unused_fd_flags+0x4d/0xba
[<c0177088>] do_sys_open+0x44/0xc0
[<c017713d>] sys_open+0x1c/0x1e
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
[<c02b0000>] unix_state_double_lock+0x10/0x3c
=======================
BUG: soft lockup - CPU#0 stuck for 11s! [hald-addon-stor:1974]
Pid: 1974, comm: hald-addon-stor Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<c02bdc90>] EFLAGS: 00000286 CPU: 0
EIP is at lock_kernel+0x17/0x2c
EAX: f65218b0 EBX: f74473c0 ECX: 00000000 EDX: 00000000
ESI: f72835c0 EDI: fffffff4 EBP: c01987dd ESP: f72bdec0
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7f14195 CR3: 0391f000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<c019841d>] do_open+0x23/0x255
[<c01987dd>] blkdev_open+0x0/0x4d
[<c0198802>] blkdev_open+0x25/0x4d
[<c0176ecb>] __dentry_open+0xce/0x185
[<c0176ffc>] nameidata_to_filp+0x24/0x33
[<c017703d>] do_filp_open+0x32/0x39
[<c0176d89>] get_unused_fd_flags+0x4d/0xba
[<c0177088>] do_sys_open+0x44/0xc0
[<c017713d>] sys_open+0x1c/0x1e
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
** Loaded modules:
Module Size Used by
ac 6116 0
battery 13572 0
ipv6 240836 14
firewire_sbp2 14252 0
loop 16804 0
snd_atiixp 18988 0
snd_ac97_codec 92932 1 snd_atiixp
ac97_bus 2176 1 snd_ac97_codec
snd_pcm_oss 38272 0
snd_pcm 71780 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_mixer_oss 15296 1 snd_pcm_oss
snd_seq_dummy 3780 0
evdev 11104 2
snd_seq_oss 29472 0
snd_seq_midi_event 6976 1 snd_seq_oss
snd_seq 46544 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 21092 2 snd_pcm,snd_seq
snd_seq_device 7820 3 snd_seq_dummy,snd_seq_oss,snd_seq
i2c_piix4 8428 0
button 8432 0
psmouse 36464 0
i2c_core 22432 1 i2c_piix4
serio_raw 6660 0
irtty_sir 8096 0
ati_agp 8684 1
snd 48612 9 snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
sir_dev 15460 1 irtty_sir
shpchp 31028 0
pci_hotplug 27712 1 shpchp
agpgart 31688 1 ati_agp
soundcore 7552 1 snd
irda 174236 2 irtty_sir,sir_dev
rtc 13052 0
snd_page_alloc 10056 2 snd_atiixp,snd_pcm
crc_ccitt 2176 1 irda
pcspkr 3200 0
xfs 500056 2
sd_mod 27200 0
ide_cd 36224 0
cdrom 32512 1 ide_cd
ide_disk 15648 3
usb_storage 77536 0
scsi_mod 141164 3 firewire_sbp2,sd_mod,usb_storage
atiixp 4592 0 [permanent]
firewire_ohci 17760 0
firewire_core 39232 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
8139too 25600 0
mii 5312 1 8139too
ide_core 108292 3 ide_cd,ide_disk,atiixp
ohci_hcd 21988 0
ehci_hcd 32524 0
usbcore 132940 4 usb_storage,ohci_hcd,ehci_hcd
thermal 16028 0
processor 36520 1 thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon 9100 IGP Host Bridge [1002:5833] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: agpgart-ati
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge [1002:5838]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) (prog-if 20)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 17)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at e000 [size=16]
Region 1: Memory at e0203000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller [1002:4342] (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:c0b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: ATI IXP AC97 controller
Kernel modules: snd-atiixp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 9100 IGP [1002:5834]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e0020000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at e0110000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at e0100000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
02:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80) (prog-if 10)
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0111000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d400 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
--- End Message ---