Your message dated Mon, 6 Oct 2008 11:40:21 +0200 with message-id <20081006094021.GD4634@stro.at> and subject line Re: Bug#501159: linux-image-2.6.26-1-amd64: sata hdd, boot-warnings "softreset failed (device not ready)" has caused the Debian Bug report #501159, regarding linux-image-2.6.26-1-amd64: sata hdd, boot-warnings "softreset failed (device not ready)" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 501159: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=501159 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.26-1-amd64: sata hdd, boot-warnings "softreset failed (device not ready)"
- From: Matthias Köhne <pluvo@kaoso.org>
- Date: Sat, 04 Oct 2008 23:47:48 +0200
- Message-id: <[🔎] 1223156868.6507.1.camel@osiris.homenetwork>
Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-5 Severity: normal *** Please type your report below this line *** Machine: Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz) Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: F5) Memory: Kingston KVR800D2N5K2/4G (4 GB, DDR2-800, Kingston ValueRAM) HDD: 4x Western Digital WD1000FYPS (1 TB, SATA) (ahci) At the boot of Debian i got "softreset failed..." messages. With the Kernel "2.6.25" i didn't get these messages. I uploaded about 2 TB of data on this machine and I don't get a soft-reset during the upload. I discover this only at the boot. This machine works fine since 10 days. The dmesg-output didn't report "softresets" after the boot. -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008 ** Command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 ** Not tainted ** Kernel log: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008 [ 0.000000] Command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851424) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1212416) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1212416 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F70C0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFDE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP CFDE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT CFDE30C0, 6550 (r1 GBT GBTUACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS CFDE0000, 0040 [ 0.000000] ACPI: SSDT CFDE9700, 028A (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET CFDE99C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG CFDE9A00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC CFDE9640, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000128000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851424) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1212416) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000128000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000037fff] pages 25 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS [ 0.000000] early res: 3 [378ad000-37fefbda] RAMDISK [ 0.000000] early res: 4 [9f800-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20003800000-ffffe200041fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1212416 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851424 [ 0.000000] 0: 1048576 -> 1212416 [ 0.000000] On node 0 totalpages: 1015167 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1246 pages reserved [ 0.000000] DMA zone: 2697 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 2240 pages used for memmap [ 0.000000] Normal zone: 161600 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 [ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cfe00000:10200000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997345 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2505.339 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] No AGP bridge found [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [ 0.004000] Memory: 3925352k/4849664k available (2225k kernel code, 135316k reserved, 1079k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.084007] Calibrating delay using timer specific routine.. 5014.88 BogoMIPS (lpj=10029767) [ 0.084053] Security Framework initialized [ 0.084057] SELinux: Disabled at boot. [ 0.084060] Capability LSM initialized [ 0.084431] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.086854] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.088030] Mount-cache hash table entries: 256 [ 0.088177] Initializing cgroup subsys ns [ 0.088180] Initializing cgroup subsys cpuacct [ 0.088183] Initializing cgroup subsys devices [ 0.088199] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.088201] CPU: L2 Cache: 512K (64 bytes/line) [ 0.088203] CPU 0/0 -> Node 0 [ 0.088213] CPU: Physical Processor ID: 0 [ 0.088215] CPU: Processor Core ID: 0 [ 0.088793] ACPI: Core revision 20080321 [ 0.140008] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.140008] Using local APIC timer interrupts. [ 0.144009] APIC timer calibration result 12526688 [ 0.144009] Detected 12.526 MHz APIC timer. [ 0.144009] Booting processor 1/1 ip 6000 [ 0.152009] Initializing CPU#1 [ 0.152009] Calibrating delay using timer specific routine.. 5010.70 BogoMIPS (lpj=10021406) [ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.152009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.152009] CPU 1/1 -> Node 0 [ 0.152009] CPU: Physical Processor ID: 0 [ 0.152009] CPU: Processor Core ID: 1 [ 0.231886] CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.231896] Brought up 2 CPUs [ 0.231898] Total of 2 processors activated (10025.58 BogoMIPS). [ 0.232014] CPU0 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 0 1 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] CPU1 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 1 0 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] net_namespace: 1224 bytes [ 0.232014] Booting paravirtualized kernel on bare hardware [ 0.232014] NET: Registered protocol family 16 [ 0.232014] node 0 link 0: io port [c000, ffff] [ 0.232014] TOM: 00000000d8000000 aka 3456M [ 0.232014] node 0 link 0: mmio [a0000, bffff] [ 0.232014] node 0 link 0: mmio [d8000000, fe02ffff] [ 0.232014] node 0 link 0: mmio [e0000000, efffffff] [ 0.232014] TOM2: 0000000128000000 aka 4736M [ 0.232014] bus: [00,03] on node 0 link 0 [ 0.232014] bus: 00 index 0 io port: [0, ffff] [ 0.232014] bus: 00 index 1 mmio: [a0000, bffff] [ 0.232014] bus: 00 index 2 mmio: [d8000000, ffffffff] [ 0.232014] bus: 00 index 3 mmio: [128000000, fcffffffff] [ 0.232014] ACPI: bus type pci registered [ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.232014] PCI: MCFG area at e0000000 reserved in E820 [ 0.248015] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.248015] PCI: Using configuration type 1 for base access [ 0.248015] ACPI: EC: Look up EC in DSDT [ 0.255455] ACPI: Interpreter enabled [ 0.255459] ACPI: (supports S0 S1 S4 S5) [ 0.255477] ACPI: Using IOAPIC for interrupt routing [ 0.264625] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.264625] PCI: Transparent bridge - 0000:00:14.4 [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.281018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.281023] pnp: PnP ACPI init [ 0.281023] ACPI: bus type pnp registered [ 0.281023] pnp 00:00: parse allocated resources [ 0.281023] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.281023] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.281023] pnp 00:01: parse allocated resources [ 0.281023] pnp 00:01: add io 0x10-0x1f flags 0x1 [ 0.281023] pnp 00:01: add io 0x22-0x3f flags 0x1 [ 0.281023] pnp 00:01: add io 0x44-0x4d flags 0x1 [ 0.281023] pnp 00:01: add io 0x50-0x5f flags 0x1 [ 0.281023] pnp 00:01: add io 0x62-0x63 flags 0x1 [ 0.281023] pnp 00:01: add io 0x65-0x6f flags 0x1 [ 0.281023] pnp 00:01: add io 0x74-0x7f flags 0x1 [ 0.281023] pnp 00:01: add io 0x91-0x93 flags 0x1 [ 0.281023] pnp 00:01: add io 0xa2-0xbf flags 0x1 [ 0.281023] pnp 00:01: add io 0xe0-0xef flags 0x1 [ 0.281023] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1 [ 0.281023] pnp 00:01: add io 0x220-0x225 flags 0x1 [ 0.281023] pnp 00:01: add io 0x290-0x294 flags 0x1 [ 0.281023] pnp 00:01: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.281023] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284885] pnp 00:02: parse allocated resources [ 0.284989] pnp 00:02: add io 0x4100-0x411f flags 0x1 [ 0.284991] pnp 00:02: add io 0x228-0x22f flags 0x1 [ 0.284993] pnp 00:02: add io 0x238-0x23f flags 0x1 [ 0.284994] pnp 00:02: add io 0x40b-0x40b flags 0x1 [ 0.284996] pnp 00:02: add io 0x4d6-0x4d6 flags 0x1 [ 0.284998] pnp 00:02: add io 0xc00-0xc01 flags 0x1 [ 0.284999] pnp 00:02: add io 0xc14-0xc14 flags 0x1 [ 0.285001] pnp 00:02: add io 0xc50-0xc52 flags 0x1 [ 0.285003] pnp 00:02: add io 0xc6c-0xc6d flags 0x1 [ 0.285005] pnp 00:02: add io 0xc6f-0xc6f flags 0x1 [ 0.285007] pnp 00:02: add io 0xcd0-0xcd1 flags 0x1 [ 0.285008] pnp 00:02: add io 0xcd2-0xcd3 flags 0x1 [ 0.285010] pnp 00:02: add io 0xcd4-0xcdf flags 0x1 [ 0.285012] pnp 00:02: add io 0x4000-0x40fe flags 0x1 [ 0.285014] pnp 00:02: add io 0x4210-0x4217 flags 0x1 [ 0.285015] pnp 00:02: add io 0xb00-0xb0f flags 0x1 [ 0.285017] pnp 00:02: add io 0xb10-0xb1f flags 0x1 [ 0.285019] pnp 00:02: add io 0xb20-0xb3f flags 0x1 [ 0.285022] pnp 00:02: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.285190] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.285449] pnp 00:03: parse allocated resources [ 0.285454] pnp 00:03: add dma 4 flags 0x4 [ 0.285456] pnp 00:03: add io 0x0-0xf flags 0x1 [ 0.285458] pnp 00:03: add io 0x80-0x90 flags 0x1 [ 0.285459] pnp 00:03: add io 0x94-0x9f flags 0x1 [ 0.285461] pnp 00:03: add io 0xc0-0xdf flags 0x1 [ 0.285611] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.285672] pnp 00:04: parse allocated resources [ 0.285729] pnp 00:04: add irq 8 flags 0x1 [ 0.285731] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x1 [ 0.285883] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.285894] pnp 00:05: parse allocated resources [ 0.285942] pnp 00:05: add io 0x70-0x73 flags 0x1 [ 0.286092] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.286104] pnp 00:06: parse allocated resources [ 0.286108] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.286258] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.286270] pnp 00:07: parse allocated resources [ 0.286275] pnp 00:07: add io 0xf0-0xff flags 0x1 [ 0.286283] pnp 00:07: add irq 13 flags 0x1 [ 0.286433] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.286778] pnp 00:08: parse allocated resources [ 0.287003] pnp 00:08: add io 0x3f8-0x3ff flags 0x1 [ 0.287011] pnp 00:08: add irq 4 flags 0x1 [ 0.287013] pnp 00:08: parse resource options [ 0.287014] pnp 00:08: new independent option [ 0.287020] pnp 00:08: new dependent option (priority 0x1) [ 0.287023] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.287027] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287030] pnp 00:08: new dependent option (priority 0x1) [ 0.287032] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 0.287036] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287038] pnp 00:08: new dependent option (priority 0x1) [ 0.287040] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 0.287044] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287046] pnp 00:08: new dependent option (priority 0x1) [ 0.287048] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 0.287052] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287054] pnp 00:08: end dependent options [ 0.287206] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.287362] pnp 00:09: parse allocated resources [ 0.287591] pnp 00:09: add io 0x378-0x37f flags 0x1 [ 0.287599] pnp 00:09: add irq 7 flags 0x1 [ 0.287601] pnp 00:09: parse resource options [ 0.287603] pnp 00:09: new independent option [ 0.287608] pnp 00:09: new dependent option (priority 0x1) [ 0.287610] pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1 [ 0.287614] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287616] pnp 00:09: new dependent option (priority 0x1) [ 0.287618] pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1 [ 0.287621] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287624] pnp 00:09: new dependent option (priority 0x1) [ 0.287626] pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 [ 0.287629] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287631] pnp 00:09: end dependent options [ 0.287783] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.287993] pnp 00:0a: parse allocated resources [ 0.287997] pnp 00:0a: add io 0x60-0x60 flags 0x1 [ 0.287999] pnp 00:0a: add io 0x64-0x64 flags 0x1 [ 0.288007] pnp 00:0a: add irq 1 flags 0x1 [ 0.288161] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.288208] pnp 00:0b: parse allocated resources [ 0.288242] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.288245] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.288422] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.288434] pnp 00:0c: parse allocated resources [ 0.288629] pnp 00:0c: add mem 0xd1a00-0xd3fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xcfde0000-0xcfdfffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0x100000-0xcfddffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xcfef0000-0xd7eeffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfff80000-0xfffeffff flags 0x1 [ 0.288629] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources +0x0/0x15c [ 0.288629] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.288629] pnp: PnP ACPI: found 13 devices [ 0.288629] ACPI: ACPI bus type pnp unregistered [ 0.288629] usbcore: registered new interface driver usbfs [ 0.288629] usbcore: registered new interface driver hub [ 0.288629] usbcore: registered new device driver usb [ 0.288629] PCI: Using ACPI for IRQ routing [ 0.308630] PCI-DMA: Disabling AGP. [ 0.308630] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 0.308630] PCI-DMA: using GART IOMMU. [ 0.308630] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.308630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.308630] hpet0: 4 32-bit timers, 14318180 Hz [ 0.308630] ACPI: RTC can wake from S4 [ 0.310410] Switched to high resolution mode on CPU 0 [ 0.313117] Switched to high resolution mode on CPU 1 [ 0.322378] pnp: the driver 'system' has been registered [ 0.322395] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.322397] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.322400] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.322402] system 00:01: driver attached [ 0.322408] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.322411] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.322414] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.322416] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.322418] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.322421] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.322423] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.322425] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.322428] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.322430] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.322433] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.322435] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.322437] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.322440] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.322443] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.322445] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.322448] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.322450] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.322452] system 00:02: driver attached [ 0.322463] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.322466] system 00:0b: driver attached [ 0.322472] system 00:0c: iomem range 0xd1a00-0xd3fff has been reserved [ 0.322474] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.322476] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.322479] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.322481] system 00:0c: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.322485] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.322488] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.322490] system 00:0c: iomem range 0x100000-0xcfddffff could not be reserved [ 0.322492] system 00:0c: iomem range 0xcfef0000-0xd7eeffff has been reserved [ 0.322495] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.322498] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.322500] system 00:0c: iomem range 0xfff80000-0xfffeffff could not be reserved [ 0.322502] system 00:0c: driver attached [ 0.325118] PCI: Bridge: 0000:00:01.0 [ 0.325118] IO window: e000-efff [ 0.325118] MEM window: 0xfdd00000-0xfdefffff [ 0.325118] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff [ 0.325118] PCI: Bridge: 0000:00:0a.0 [ 0.325118] IO window: d000-dfff [ 0.325118] MEM window: 0xfda00000-0xfdafffff [ 0.325118] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.325118] PCI: Bridge: 0000:00:14.4 [ 0.325118] IO window: c000-cfff [ 0.325118] MEM window: 0xfdc00000-0xfdcfffff [ 0.325118] PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff [ 0.325118] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.325118] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.325118] NET: Registered protocol family 2 [ 0.361104] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.364949] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.368953] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.368953] TCP: Hash tables configured (established 524288 bind 65536) [ 0.368953] TCP reno registered [ 0.377074] NET: Registered protocol family 1 [ 0.377164] checking if image is initramfs... it is [ 0.812947] Freeing initrd memory: 7434k freed [ 0.816950] audit: initializing netlink socket (disabled) [ 0.816950] type=2000 audit(1222287115.804:1): initialized [ 0.816950] Total HugeTLB memory allocated, 0 [ 0.816950] VFS: Disk quotas dquot_6.5.1 [ 0.816950] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.816950] msgmni has been set to 7681 [ 0.816950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.816950] io scheduler noop registered [ 0.816950] io scheduler anticipatory registered [ 0.816950] io scheduler deadline registered [ 0.816950] io scheduler cfq registered (default) [ 1.631145] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184 [ 1.715805] pci 0000:01:05.0: Boot video device [ 1.719136] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.719136] assign_interrupt_mode Found MSI capability [ 1.719136] Allocate Port Service[0000:00:0a.0:pcie00] [ 1.719136] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20011100000, using 3072k, total 16384k [ 1.719136] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 1.719136] vesafb: scrolling: redraw [ 1.719136] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.933709] Console: switching to colour frame buffer device 128x48 [ 1.941709] fb0: VESA VGA frame buffer device [ 1.945709] hpet_resources: 0xfed00000 is busy [ 1.945709] Linux agpgart interface v0.103 [ 1.945709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.945709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.945709] pnp: the driver 'serial' has been registered [ 1.945709] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.945709] serial 00:08: driver attached [ 1.945709] brd: module loaded [ 1.945709] input: Macintosh mouse button emulation as /class/input/input0 [ 1.945709] pnp: the driver 'i8042 kbd' has been registered [ 1.945709] i8042 kbd 00:0a: driver attached [ 1.945709] pnp: the driver 'i8042 aux' has been registered [ 1.945709] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.945709] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.945709] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.966198] mice: PS/2 mouse device common for all mice [ 1.966198] pnp: the driver 'rtc_cmos' has been registered [ 1.966198] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.966198] rtc0: alarms up to one month [ 1.966198] rtc_cmos 00:05: driver attached [ 1.966198] cpuidle: using governor ladder [ 1.966198] cpuidle: using governor menu [ 1.966198] No iBFT detected. [ 1.966198] TCP cubic registered [ 1.966198] NET: Registered protocol family 17 [ 1.966198] registered taskstats version 1 [ 1.966198] rtc_cmos 00:05: setting system clock to 2008-09-24 20:11:57 UTC (1222287117) [ 1.966198] Freeing unused kernel memory: 392k freed [ 1.982947] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.064542] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.064542] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.256685] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 2.256707] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.256724] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 2.256995] eth0: RTL8168c/8111c at 0xffffc20000622000, 00:1f:d0:58:3f:cc, XID 3c4000c0 IRQ 1278 [ 2.280435] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.280468] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.280483] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.280598] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.280629] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 2.282441] No dock devices found. [ 2.289881] SCSI subsystem initialized [ 2.303043] libata version 3.00 loaded. [ 2.312765] Uniform Multi-Platform E-IDE driver [ 2.312765] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.342314] usb usb1: configuration #1 chosen from 1 choice [ 2.342344] hub 1-0:1.0: USB hub found [ 2.342355] hub 1-0:1.0: 3 ports detected [ 2.444892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.444895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.444898] usb usb1: Product: OHCI Host Controller [ 2.444899] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.444901] usb usb1: SerialNumber: 0000:00:12.0 [ 2.444957] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.444974] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.445027] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2 [ 2.445044] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 2.504866] usb usb2: configuration #1 chosen from 1 choice [ 2.504893] hub 2-0:1.0: USB hub found [ 2.504904] hub 2-0:1.0: 3 ports detected [ 2.624102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.624102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.624102] usb usb2: Product: OHCI Host Controller [ 2.624102] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.624102] usb usb2: SerialNumber: 0000:00:12.1 [ 2.624102] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.624102] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.624102] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3 [ 2.624102] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.684279] usb usb3: configuration #1 chosen from 1 choice [ 2.684302] hub 3-0:1.0: USB hub found [ 2.684311] hub 3-0:1.0: 3 ports detected [ 2.724312] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 2.796205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.796205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.796205] usb usb3: Product: OHCI Host Controller [ 2.796205] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.796205] usb usb3: SerialNumber: 0000:00:13.0 [ 2.796205] ahci 0000:00:11.0: version 3.0 [ 2.796205] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 2.924201] usb 1-3: configuration #1 chosen from 1 choice [ 2.992387] usb 1-3: New USB device found, idVendor=051d, idProduct=0002 [ 2.992390] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.992392] usb 1-3: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8 [ 2.992394] usb 1-3: Manufacturer: American Power Conversion [ 2.992395] usb 1-3: SerialNumber: 4B0727P12762 [ 3.848767] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 3.848771] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 3.852707] scsi0 : ahci [ 3.852707] scsi1 : ahci [ 3.852707] scsi2 : ahci [ 3.852707] scsi3 : ahci [ 3.852707] scsi4 : ahci [ 3.852707] scsi5 : ahci [ 3.852707] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 1277 [ 3.852707] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 1277 [ 3.852707] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 1277 [ 3.852707] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 1277 [ 3.852707] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 1277 [ 3.852707] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 1277 [ 4.437542] ata1: softreset failed (device not ready) [ 4.437635] ata1: failed due to HW bug, retry pmp=0 [ 4.601260] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.618181] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 4.618181] ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 4.618181] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.618181] ata1.00: configured for UDMA/133 [ 5.233061] ata2: softreset failed (device not ready) [ 5.233147] ata2: failed due to HW bug, retry pmp=0 [ 5.397066] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.409350] ata2.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 5.409350] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.409350] ata2.00: configured for UDMA/133 [ 6.025066] ata3: softreset failed (device not ready) [ 6.025152] ata3: failed due to HW bug, retry pmp=0 [ 6.237054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.249809] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.249809] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.249809] ata3.00: configured for UDMA/133 [ 6.733543] ata4: softreset failed (device not ready) [ 6.733629] ata4: failed due to HW bug, retry pmp=0 [ 6.897260] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.915933] ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.915933] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.915933] ata4.00: configured for UDMA/133 [ 7.365079] ata5: SATA link down (SStatus 0 SControl 300) [ 7.688452] ata6: SATA link down (SStatus 0 SControl 300) [ 7.688428] scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 1:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 3:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.688428] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 7.688428] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 7.688428] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 7.828517] usb usb4: configuration #1 chosen from 1 choice [ 7.828543] hub 4-0:1.0: USB hub found [ 7.828553] hub 4-0:1.0: 3 ports detected [ 7.972441] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.972443] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.972445] usb usb4: Product: OHCI Host Controller [ 7.972447] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 7.972448] usb usb4: SerialNumber: 0000:00:13.1 [ 7.972539] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.972553] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 7.972596] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 7.972637] ehci_hcd 0000:00:12.2: debug port 1 [ 7.972656] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 7.972656] usb 1-3: USB disconnect, address 2 [ 7.984367] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.984423] usb usb5: configuration #1 chosen from 1 choice [ 7.984449] hub 5-0:1.0: USB hub found [ 7.984456] hub 5-0:1.0: 6 ports detected [ 8.108687] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.108689] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.108691] usb usb5: Product: EHCI Host Controller [ 8.108693] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd [ 8.108694] usb usb5: SerialNumber: 0000:00:12.2 [ 8.108787] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 8.108798] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 8.108838] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 8.108877] ehci_hcd 0000:00:13.2: debug port 1 [ 8.108894] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 8.120624] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.120678] usb usb6: configuration #1 chosen from 1 choice [ 8.120702] hub 6-0:1.0: USB hub found [ 8.120708] hub 6-0:1.0: 6 ports detected [ 8.252212] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.252215] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.252217] usb usb6: Product: EHCI Host Controller [ 8.252218] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd [ 8.252220] usb usb6: SerialNumber: 0000:00:13.2 [ 8.252251] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18 [ 8.252264] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 8.252306] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 8.252320] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 8.312211] usb usb7: configuration #1 chosen from 1 choice [ 8.312236] hub 7-0:1.0: USB hub found [ 8.312246] hub 7-0:1.0: 2 ports detected [ 8.416209] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.416211] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.416213] usb usb7: Product: OHCI Host Controller [ 8.416215] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 8.416217] usb usb7: SerialNumber: 0000:00:14.5 [ 8.416273] ATIIXP: IDE controller (0x1002:0x439c rev 0x00) at PCI slot 0000:00:14.1 [ 8.416285] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.416294] ATIIXP: not 100% native mode: will probe irqs later [ 8.416303] ide0: BM-DMA at 0xfa00-0xfa07 [ 8.416310] ATIIXP: simplex device: DMA disabled [ 8.416312] ide1: DMA disabled [ 8.416314] Probing IDE interface ide0... [ 8.627936] usb 1-3: new low speed USB device using ohci_hcd and address 3 [ 8.899798] usb 1-3: configuration #1 chosen from 1 choice [ 8.910662] usb 1-3: New USB device found, idVendor=051d, idProduct=0002 [ 8.910665] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 8.910667] usb 1-3: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8 [ 8.910669] usb 1-3: Manufacturer: American Power Conversion [ 8.910670] usb 1-3: SerialNumber: 4B0727P12762 [ 9.007826] Probing IDE interface ide1... [ 9.568339] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 9.568381] ide1 at 0x170-0x177,0x376 on irq 15 [ 9.624307] Driver 'sd' needs updating - please use bus_type methods [ 9.624307] sd 0:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204 MB) [ 9.624307] sd 0:0:0:0: [sda] Write Protect is off [ 9.624307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.624307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.624307] sd 0:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204 MB) [ 9.624307] sd 0:0:0:0: [sda] Write Protect is off [ 9.624307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.624307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.624307] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 9.670124] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.670212] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.670231] sd 1:0:0:0: [sdb] Write Protect is off [ 9.670234] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.670264] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.670317] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.670334] sd 1:0:0:0: [sdb] Write Protect is off [ 9.670336] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.670366] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.670368] sdb:<6>usbcore: registered new interface driver hiddev [ 9.691779] sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > [ 9.707777] sd 1:0:0:0: [sdb] Attached SCSI disk [ 9.707777] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.707777] sd 2:0:0:0: [sdc] Write Protect is off [ 9.707777] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.707777] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.707804] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.707804] sd 2:0:0:0: [sdc] Write Protect is off [ 9.707804] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.707804] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.707804] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 > [ 9.747779] sd 2:0:0:0: [sdc] Attached SCSI disk [ 9.747779] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.747779] sd 3:0:0:0: [sdd] Write Protect is off [ 9.747779] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.747779] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.747779] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.747779] sd 3:0:0:0: [sdd] Write Protect is off [ 9.747779] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.747779] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.747779] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 > [ 9.799776] sd 3:0:0:0: [sdd] Attached SCSI disk [ 11.234244] hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:12.0-3 [ 11.234244] usbcore: registered new interface driver usbhid [ 11.234244] usbhid: v2.6:USB HID core driver [ 11.320058] md: raid1 personality registered for level 1 [ 11.322559] xor: automatically using best checksumming function: generic_sse [ 11.338847] generic_sse: 7712.000 MB/sec [ 11.338849] xor: using function: generic_sse (7712.000 MB/sec) [ 11.340512] async_tx: api initialized (async) [ 11.406967] raid6: int64x1 2275 MB/s [ 11.474864] raid6: int64x2 2913 MB/s [ 11.544304] raid6: int64x4 2937 MB/s [ 11.612675] raid6: int64x8 1990 MB/s [ 11.679278] raid6: sse2x1 3514 MB/s [ 11.747136] raid6: sse2x2 4615 MB/s [ 11.815508] raid6: sse2x4 4783 MB/s [ 11.815510] raid6: using algorithm sse2x4 (4783 MB/s) [ 11.815513] md: raid6 personality registered for level 6 [ 11.815514] md: raid5 personality registered for level 5 [ 11.815516] md: raid4 personality registered for level 4 [ 11.823229] md: md0 stopped. [ 11.887810] md: bind<sdb1> [ 11.887972] md: bind<sdc1> [ 11.888125] md: bind<sdd1> [ 11.888722] md: bind<sda1> [ 11.896724] raid1: raid set md0 active with 4 out of 4 mirrors [ 11.896724] md: md1 stopped. [ 11.965617] md: bind<sdb5> [ 11.965797] md: bind<sdc5> [ 11.965951] md: bind<sdd5> [ 11.966087] md: bind<sda5> [ 11.974843] raid5: device sda5 operational as raid disk 0 [ 11.974845] raid5: device sdd5 operational as raid disk 3 [ 11.974847] raid5: device sdc5 operational as raid disk 2 [ 11.974849] raid5: device sdb5 operational as raid disk 1 [ 11.976555] raid5: allocated 4274kB for md1 [ 11.976555] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 [ 11.976555] RAID5 conf printout: [ 11.976555] --- rd:4 wd:4 [ 11.976555] disk 0, o:1, dev:sda5 [ 11.976555] disk 1, o:1, dev:sdb5 [ 11.976555] disk 2, o:1, dev:sdc5 [ 11.976555] disk 3, o:1, dev:sdd5 [ 11.976555] md: md2 stopped. [ 11.996956] md: bind<sdb7> [ 11.997117] md: bind<sdc7> [ 11.997267] md: bind<sdd7> [ 11.997404] md: bind<sda7> [ 12.006154] raid5: device sda7 operational as raid disk 0 [ 12.006156] raid5: device sdd7 operational as raid disk 3 [ 12.006158] raid5: device sdc7 operational as raid disk 2 [ 12.006160] raid5: device sdb7 operational as raid disk 1 [ 12.008554] raid5: allocated 4274kB for md2 [ 12.008554] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2 [ 12.008554] RAID5 conf printout: [ 12.008554] --- rd:4 wd:4 [ 12.008554] disk 0, o:1, dev:sda7 [ 12.008554] disk 1, o:1, dev:sdb7 [ 12.008554] disk 2, o:1, dev:sdc7 [ 12.008554] disk 3, o:1, dev:sdd7 [ 12.116561] device-mapper: uevent: version 1.0.3 [ 12.116561] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 27.257800] PM: Starting manual resume from disk [ 27.291682] kjournald starting. Commit interval 5 seconds [ 27.291682] EXT3-fs: mounted filesystem with ordered data mode. [ 28.558029] udevd version 125 started [ 29.071834] input: Power Button (FF) as /class/input/input2 [ 29.136425] ACPI: Power Button (FF) [PWRF] [ 29.136624] input: Power Button (CM) as /class/input/input3 [ 29.199838] ACPI: Power Button (CM) [PWRB] [ 29.200138] ACPI: WMI: Mapper loaded [ 29.363634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.383634] shpchp: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 29.383634] shpchp: shpc_init: cannot reserve MMIO region [ 29.383762] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.438987] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 29.567200] input: PC Speaker as /class/input/input4 [ 29.678640] ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 29.678640] PCI: Setting latency timer of device 0000:01:05.1 to 64 [ 29.685369] Error: Driver 'pcspkr' is already registered, aborting... [ 29.767412] pnp: the driver 'parport_pc' has been registered [ 29.767412] parport_pc 00:09: reported by Plug and Play ACPI [ 29.767412] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 29.859458] parport_pc 00:09: driver attached [ 31.664694] EXT3 FS on dm-2, internal journal [ 32.366829] loop: module loaded [ 32.402030] it87: Found IT8718F chip at 0x228, revision 5 [ 32.405431] it87: in3 is VCC (+5V) [ 53.886200] kjournald starting. Commit interval 5 seconds [ 53.917449] EXT3 FS on md0, internal journal [ 53.920493] EXT3-fs: mounted filesystem with ordered data mode. [ 54.458313] kjournald starting. Commit interval 5 seconds [ 54.498157] EXT3 FS on dm-4, internal journal [ 54.501493] EXT3-fs: mounted filesystem with ordered data mode. [ 54.599968] Adding 1949688k swap on /dev/mapper/vglenny-lvswap. Priority:-1 extents:1 across:1949688k [ 55.735775] r8169: eth0: link up [ 55.742713] r8169: eth0: link up [ 56.360941] NET: Registered protocol family 10 [ 56.361478] lo: Disabled Privacy Extensions [ 57.146178] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e processors (2 cpu cores) (version 2.20.00) [ 57.146177] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0xe [ 57.146177] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xf [ 57.146177] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x11 [ 57.146177] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x13 [ 57.146177] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x15 [ 57.146177] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x16 [ 58.389720] Clocksource tsc unstable (delta = -290680939 ns) [ 60.160988] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 66.568728] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by video 24084 0 output 7808 1 video ac 9352 0 battery 16904 0 powernow_k8 17156 1 cpufreq_conservative 11784 0 cpufreq_userspace 8452 0 cpufreq_powersave 6400 0 cpufreq_stats 9120 0 cpufreq_ondemand 11792 1 freq_table 9344 3 powernow_k8,cpufreq_stats,cpufreq_ondemand ipv6 288328 22 it87 28696 0 hwmon_vid 7296 1 it87 loop 19468 0 parport_pc 31016 0 parport 41776 1 parport_pc snd_hda_intel 434776 0 pcspkr 7040 0 snd_pcm 81800 1 snd_hda_intel snd_timer 25744 1 snd_pcm k8temp 9216 0 snd 63688 3 snd_hda_intel,snd_pcm,snd_timer soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm i2c_piix4 13072 0 i2c_core 27936 1 i2c_piix4 shpchp 34080 0 pci_hotplug 32056 1 shpchp wmi 11712 0 button 11680 0 evdev 14208 0 ext3 124688 3 jbd 51240 1 ext3 mbcache 12804 1 ext3 sha256_generic 13696 0 aes_x86_64 12416 4 aes_generic 32552 1 aes_x86_64 cbc 7936 2 dm_crypt 17032 1 crypto_blkcipher 21636 4 cbc,dm_crypt dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_snapshot 19400 0 dm_mod 58864 15 dm_crypt,dm_mirror,dm_log,dm_snapshot raid456 125984 2 async_xor 8448 1 raid456 async_memcpy 6912 1 raid456 async_tx 11764 3 raid456,async_xor,async_memcpy xor 9744 2 raid456,async_xor raid1 24192 1 md_mod 80164 5 raid456,raid1 usbhid 45792 0 hid 41792 1 usbhid ff_memless 9224 1 usbhid sd_mod 29376 16 ata_generic 10116 0 ide_pci_generic 9220 0 [permanent] atiixp 8324 0 [permanent] ide_core 128284 2 ide_pci_generic,atiixp ahci 32520 12 libata 165472 2 ata_generic,ahci scsi_mod 160760 2 sd_mod,libata dock 14112 1 libata ehci_hcd 36108 0 ohci_hcd 25092 0 r8169 31492 0 thermal 22688 0 processor 42304 2 powernow_k8,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 1277 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp, ide-pci-generic, ata_generic 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc Device [1002:4383] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: fdb00000-fdbfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at ee00 [size=256] Region 2: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fdd00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f] Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fdefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1278 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fdf00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: Thank you! -- http://kaoso.org/impressum.xhtmlAttachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
--- End Message ---
--- Begin Message ---
- To: 501159-done@bugs.debian.org
- Subject: Re: Bug#501159: linux-image-2.6.26-1-amd64: sata hdd, boot-warnings "softreset failed (device not ready)"
- From: maximilian attems <max@stro.at>
- Date: Mon, 6 Oct 2008 11:40:21 +0200
- Message-id: <20081006094021.GD4634@stro.at>
- In-reply-to: <[🔎] 1223156868.6507.1.camel@osiris.homenetwork>
- References: <[🔎] 1223156868.6507.1.camel@osiris.homenetwork>
On Sat, 04 Oct 2008, Matthias Köhne wrote: > Package: linux-image-2.6.26-1-amd64 > Version: 2.6.26-5 > Severity: normal > > *** Please type your report below this line *** > > Machine: > Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz) > Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: F5) > Memory: Kingston KVR800D2N5K2/4G (4 GB, DDR2-800, Kingston ValueRAM) > HDD: 4x Western Digital WD1000FYPS (1 TB, SATA) (ahci) > > > At the boot of Debian i got "softreset failed..." messages. With the > Kernel "2.6.25" i didn't get these messages. I uploaded about 2 TB of > data on this machine and I don't get a soft-reset during the upload. I > discover this only at the boot. > > This machine works fine since 10 days. The dmesg-output didn't report > "softresets" after the boot. > closing as harmless message.
--- End Message ---