Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-5 Severity: normal *** Please type your report below this line *** Machine: Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz) Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: F5) Memory: Kingston KVR800D2N5K2/4G (4 GB, DDR2-800, Kingston ValueRAM) HDD: 4x Western Digital WD1000FYPS (1 TB, SATA) (ahci) At the boot of Debian i got "softreset failed..." messages. With the Kernel "2.6.25" i didn't get these messages. I uploaded about 2 TB of data on this machine and I don't get a soft-reset during the upload. I discover this only at the boot. This machine works fine since 10 days. The dmesg-output didn't report "softresets" after the boot. -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008 ** Command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 ** Not tainted ** Kernel log: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008 [ 0.000000] Command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851424) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1212416) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1212416 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F70C0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFDE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP CFDE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT CFDE30C0, 6550 (r1 GBT GBTUACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS CFDE0000, 0040 [ 0.000000] ACPI: SSDT CFDE9700, 028A (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET CFDE99C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG CFDE9A00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC CFDE9640, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000128000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851424) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1212416) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000128000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000037fff] pages 25 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS [ 0.000000] early res: 3 [378ad000-37fefbda] RAMDISK [ 0.000000] early res: 4 [9f800-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20003800000-ffffe200041fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1212416 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851424 [ 0.000000] 0: 1048576 -> 1212416 [ 0.000000] On node 0 totalpages: 1015167 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1246 pages reserved [ 0.000000] DMA zone: 2697 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 2240 pages used for memmap [ 0.000000] Normal zone: 161600 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 [ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cfe00000:10200000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997345 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/vglenny-lvlenny ro quiet vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2505.339 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] No AGP bridge found [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [ 0.004000] Memory: 3925352k/4849664k available (2225k kernel code, 135316k reserved, 1079k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.084007] Calibrating delay using timer specific routine.. 5014.88 BogoMIPS (lpj=10029767) [ 0.084053] Security Framework initialized [ 0.084057] SELinux: Disabled at boot. [ 0.084060] Capability LSM initialized [ 0.084431] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.086854] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.088030] Mount-cache hash table entries: 256 [ 0.088177] Initializing cgroup subsys ns [ 0.088180] Initializing cgroup subsys cpuacct [ 0.088183] Initializing cgroup subsys devices [ 0.088199] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.088201] CPU: L2 Cache: 512K (64 bytes/line) [ 0.088203] CPU 0/0 -> Node 0 [ 0.088213] CPU: Physical Processor ID: 0 [ 0.088215] CPU: Processor Core ID: 0 [ 0.088793] ACPI: Core revision 20080321 [ 0.140008] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.140008] Using local APIC timer interrupts. [ 0.144009] APIC timer calibration result 12526688 [ 0.144009] Detected 12.526 MHz APIC timer. [ 0.144009] Booting processor 1/1 ip 6000 [ 0.152009] Initializing CPU#1 [ 0.152009] Calibrating delay using timer specific routine.. 5010.70 BogoMIPS (lpj=10021406) [ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.152009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.152009] CPU 1/1 -> Node 0 [ 0.152009] CPU: Physical Processor ID: 0 [ 0.152009] CPU: Processor Core ID: 1 [ 0.231886] CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.231896] Brought up 2 CPUs [ 0.231898] Total of 2 processors activated (10025.58 BogoMIPS). [ 0.232014] CPU0 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 0 1 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] CPU1 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 1 0 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] net_namespace: 1224 bytes [ 0.232014] Booting paravirtualized kernel on bare hardware [ 0.232014] NET: Registered protocol family 16 [ 0.232014] node 0 link 0: io port [c000, ffff] [ 0.232014] TOM: 00000000d8000000 aka 3456M [ 0.232014] node 0 link 0: mmio [a0000, bffff] [ 0.232014] node 0 link 0: mmio [d8000000, fe02ffff] [ 0.232014] node 0 link 0: mmio [e0000000, efffffff] [ 0.232014] TOM2: 0000000128000000 aka 4736M [ 0.232014] bus: [00,03] on node 0 link 0 [ 0.232014] bus: 00 index 0 io port: [0, ffff] [ 0.232014] bus: 00 index 1 mmio: [a0000, bffff] [ 0.232014] bus: 00 index 2 mmio: [d8000000, ffffffff] [ 0.232014] bus: 00 index 3 mmio: [128000000, fcffffffff] [ 0.232014] ACPI: bus type pci registered [ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.232014] PCI: MCFG area at e0000000 reserved in E820 [ 0.248015] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.248015] PCI: Using configuration type 1 for base access [ 0.248015] ACPI: EC: Look up EC in DSDT [ 0.255455] ACPI: Interpreter enabled [ 0.255459] ACPI: (supports S0 S1 S4 S5) [ 0.255477] ACPI: Using IOAPIC for interrupt routing [ 0.264625] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.264625] PCI: Transparent bridge - 0000:00:14.4 [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.264625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.281018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.281023] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.281023] pnp: PnP ACPI init [ 0.281023] ACPI: bus type pnp registered [ 0.281023] pnp 00:00: parse allocated resources [ 0.281023] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.281023] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.281023] pnp 00:01: parse allocated resources [ 0.281023] pnp 00:01: add io 0x10-0x1f flags 0x1 [ 0.281023] pnp 00:01: add io 0x22-0x3f flags 0x1 [ 0.281023] pnp 00:01: add io 0x44-0x4d flags 0x1 [ 0.281023] pnp 00:01: add io 0x50-0x5f flags 0x1 [ 0.281023] pnp 00:01: add io 0x62-0x63 flags 0x1 [ 0.281023] pnp 00:01: add io 0x65-0x6f flags 0x1 [ 0.281023] pnp 00:01: add io 0x74-0x7f flags 0x1 [ 0.281023] pnp 00:01: add io 0x91-0x93 flags 0x1 [ 0.281023] pnp 00:01: add io 0xa2-0xbf flags 0x1 [ 0.281023] pnp 00:01: add io 0xe0-0xef flags 0x1 [ 0.281023] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1 [ 0.281023] pnp 00:01: add io 0x220-0x225 flags 0x1 [ 0.281023] pnp 00:01: add io 0x290-0x294 flags 0x1 [ 0.281023] pnp 00:01: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.281023] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284885] pnp 00:02: parse allocated resources [ 0.284989] pnp 00:02: add io 0x4100-0x411f flags 0x1 [ 0.284991] pnp 00:02: add io 0x228-0x22f flags 0x1 [ 0.284993] pnp 00:02: add io 0x238-0x23f flags 0x1 [ 0.284994] pnp 00:02: add io 0x40b-0x40b flags 0x1 [ 0.284996] pnp 00:02: add io 0x4d6-0x4d6 flags 0x1 [ 0.284998] pnp 00:02: add io 0xc00-0xc01 flags 0x1 [ 0.284999] pnp 00:02: add io 0xc14-0xc14 flags 0x1 [ 0.285001] pnp 00:02: add io 0xc50-0xc52 flags 0x1 [ 0.285003] pnp 00:02: add io 0xc6c-0xc6d flags 0x1 [ 0.285005] pnp 00:02: add io 0xc6f-0xc6f flags 0x1 [ 0.285007] pnp 00:02: add io 0xcd0-0xcd1 flags 0x1 [ 0.285008] pnp 00:02: add io 0xcd2-0xcd3 flags 0x1 [ 0.285010] pnp 00:02: add io 0xcd4-0xcdf flags 0x1 [ 0.285012] pnp 00:02: add io 0x4000-0x40fe flags 0x1 [ 0.285014] pnp 00:02: add io 0x4210-0x4217 flags 0x1 [ 0.285015] pnp 00:02: add io 0xb00-0xb0f flags 0x1 [ 0.285017] pnp 00:02: add io 0xb10-0xb1f flags 0x1 [ 0.285019] pnp 00:02: add io 0xb20-0xb3f flags 0x1 [ 0.285022] pnp 00:02: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.285190] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.285449] pnp 00:03: parse allocated resources [ 0.285454] pnp 00:03: add dma 4 flags 0x4 [ 0.285456] pnp 00:03: add io 0x0-0xf flags 0x1 [ 0.285458] pnp 00:03: add io 0x80-0x90 flags 0x1 [ 0.285459] pnp 00:03: add io 0x94-0x9f flags 0x1 [ 0.285461] pnp 00:03: add io 0xc0-0xdf flags 0x1 [ 0.285611] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.285672] pnp 00:04: parse allocated resources [ 0.285729] pnp 00:04: add irq 8 flags 0x1 [ 0.285731] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x1 [ 0.285883] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.285894] pnp 00:05: parse allocated resources [ 0.285942] pnp 00:05: add io 0x70-0x73 flags 0x1 [ 0.286092] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.286104] pnp 00:06: parse allocated resources [ 0.286108] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.286258] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.286270] pnp 00:07: parse allocated resources [ 0.286275] pnp 00:07: add io 0xf0-0xff flags 0x1 [ 0.286283] pnp 00:07: add irq 13 flags 0x1 [ 0.286433] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.286778] pnp 00:08: parse allocated resources [ 0.287003] pnp 00:08: add io 0x3f8-0x3ff flags 0x1 [ 0.287011] pnp 00:08: add irq 4 flags 0x1 [ 0.287013] pnp 00:08: parse resource options [ 0.287014] pnp 00:08: new independent option [ 0.287020] pnp 00:08: new dependent option (priority 0x1) [ 0.287023] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.287027] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287030] pnp 00:08: new dependent option (priority 0x1) [ 0.287032] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 0.287036] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287038] pnp 00:08: new dependent option (priority 0x1) [ 0.287040] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 0.287044] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287046] pnp 00:08: new dependent option (priority 0x1) [ 0.287048] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 0.287052] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287054] pnp 00:08: end dependent options [ 0.287206] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.287362] pnp 00:09: parse allocated resources [ 0.287591] pnp 00:09: add io 0x378-0x37f flags 0x1 [ 0.287599] pnp 00:09: add irq 7 flags 0x1 [ 0.287601] pnp 00:09: parse resource options [ 0.287603] pnp 00:09: new independent option [ 0.287608] pnp 00:09: new dependent option (priority 0x1) [ 0.287610] pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1 [ 0.287614] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287616] pnp 00:09: new dependent option (priority 0x1) [ 0.287618] pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1 [ 0.287621] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287624] pnp 00:09: new dependent option (priority 0x1) [ 0.287626] pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 [ 0.287629] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1 [ 0.287631] pnp 00:09: end dependent options [ 0.287783] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.287993] pnp 00:0a: parse allocated resources [ 0.287997] pnp 00:0a: add io 0x60-0x60 flags 0x1 [ 0.287999] pnp 00:0a: add io 0x64-0x64 flags 0x1 [ 0.288007] pnp 00:0a: add irq 1 flags 0x1 [ 0.288161] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.288208] pnp 00:0b: parse allocated resources [ 0.288242] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.288245] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources +0x0/0x15c [ 0.288422] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.288434] pnp 00:0c: parse allocated resources [ 0.288629] pnp 00:0c: add mem 0xd1a00-0xd3fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xcfde0000-0xcfdfffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0x100000-0xcfddffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xcfef0000-0xd7eeffff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1 [ 0.288629] pnp 00:0c: add mem 0xfff80000-0xfffeffff flags 0x1 [ 0.288629] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources +0x0/0x15c [ 0.288629] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.288629] pnp: PnP ACPI: found 13 devices [ 0.288629] ACPI: ACPI bus type pnp unregistered [ 0.288629] usbcore: registered new interface driver usbfs [ 0.288629] usbcore: registered new interface driver hub [ 0.288629] usbcore: registered new device driver usb [ 0.288629] PCI: Using ACPI for IRQ routing [ 0.308630] PCI-DMA: Disabling AGP. [ 0.308630] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 0.308630] PCI-DMA: using GART IOMMU. [ 0.308630] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.308630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.308630] hpet0: 4 32-bit timers, 14318180 Hz [ 0.308630] ACPI: RTC can wake from S4 [ 0.310410] Switched to high resolution mode on CPU 0 [ 0.313117] Switched to high resolution mode on CPU 1 [ 0.322378] pnp: the driver 'system' has been registered [ 0.322395] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.322397] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.322400] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.322402] system 00:01: driver attached [ 0.322408] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.322411] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.322414] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.322416] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.322418] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.322421] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.322423] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.322425] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.322428] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.322430] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.322433] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.322435] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.322437] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.322440] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.322443] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.322445] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.322448] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.322450] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.322452] system 00:02: driver attached [ 0.322463] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.322466] system 00:0b: driver attached [ 0.322472] system 00:0c: iomem range 0xd1a00-0xd3fff has been reserved [ 0.322474] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.322476] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.322479] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.322481] system 00:0c: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.322485] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.322488] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.322490] system 00:0c: iomem range 0x100000-0xcfddffff could not be reserved [ 0.322492] system 00:0c: iomem range 0xcfef0000-0xd7eeffff has been reserved [ 0.322495] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.322498] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.322500] system 00:0c: iomem range 0xfff80000-0xfffeffff could not be reserved [ 0.322502] system 00:0c: driver attached [ 0.325118] PCI: Bridge: 0000:00:01.0 [ 0.325118] IO window: e000-efff [ 0.325118] MEM window: 0xfdd00000-0xfdefffff [ 0.325118] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff [ 0.325118] PCI: Bridge: 0000:00:0a.0 [ 0.325118] IO window: d000-dfff [ 0.325118] MEM window: 0xfda00000-0xfdafffff [ 0.325118] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.325118] PCI: Bridge: 0000:00:14.4 [ 0.325118] IO window: c000-cfff [ 0.325118] MEM window: 0xfdc00000-0xfdcfffff [ 0.325118] PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff [ 0.325118] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.325118] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.325118] NET: Registered protocol family 2 [ 0.361104] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.364949] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.368953] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.368953] TCP: Hash tables configured (established 524288 bind 65536) [ 0.368953] TCP reno registered [ 0.377074] NET: Registered protocol family 1 [ 0.377164] checking if image is initramfs... it is [ 0.812947] Freeing initrd memory: 7434k freed [ 0.816950] audit: initializing netlink socket (disabled) [ 0.816950] type=2000 audit(1222287115.804:1): initialized [ 0.816950] Total HugeTLB memory allocated, 0 [ 0.816950] VFS: Disk quotas dquot_6.5.1 [ 0.816950] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.816950] msgmni has been set to 7681 [ 0.816950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.816950] io scheduler noop registered [ 0.816950] io scheduler anticipatory registered [ 0.816950] io scheduler deadline registered [ 0.816950] io scheduler cfq registered (default) [ 1.631145] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184 [ 1.715805] pci 0000:01:05.0: Boot video device [ 1.719136] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.719136] assign_interrupt_mode Found MSI capability [ 1.719136] Allocate Port Service[0000:00:0a.0:pcie00] [ 1.719136] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20011100000, using 3072k, total 16384k [ 1.719136] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 1.719136] vesafb: scrolling: redraw [ 1.719136] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.933709] Console: switching to colour frame buffer device 128x48 [ 1.941709] fb0: VESA VGA frame buffer device [ 1.945709] hpet_resources: 0xfed00000 is busy [ 1.945709] Linux agpgart interface v0.103 [ 1.945709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.945709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.945709] pnp: the driver 'serial' has been registered [ 1.945709] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.945709] serial 00:08: driver attached [ 1.945709] brd: module loaded [ 1.945709] input: Macintosh mouse button emulation as /class/input/input0 [ 1.945709] pnp: the driver 'i8042 kbd' has been registered [ 1.945709] i8042 kbd 00:0a: driver attached [ 1.945709] pnp: the driver 'i8042 aux' has been registered [ 1.945709] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.945709] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.945709] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.966198] mice: PS/2 mouse device common for all mice [ 1.966198] pnp: the driver 'rtc_cmos' has been registered [ 1.966198] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.966198] rtc0: alarms up to one month [ 1.966198] rtc_cmos 00:05: driver attached [ 1.966198] cpuidle: using governor ladder [ 1.966198] cpuidle: using governor menu [ 1.966198] No iBFT detected. [ 1.966198] TCP cubic registered [ 1.966198] NET: Registered protocol family 17 [ 1.966198] registered taskstats version 1 [ 1.966198] rtc_cmos 00:05: setting system clock to 2008-09-24 20:11:57 UTC (1222287117) [ 1.966198] Freeing unused kernel memory: 392k freed [ 1.982947] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.064542] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.064542] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.256685] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 2.256707] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.256724] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 2.256995] eth0: RTL8168c/8111c at 0xffffc20000622000, 00:1f:d0:58:3f:cc, XID 3c4000c0 IRQ 1278 [ 2.280435] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.280468] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.280483] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.280598] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.280629] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 2.282441] No dock devices found. [ 2.289881] SCSI subsystem initialized [ 2.303043] libata version 3.00 loaded. [ 2.312765] Uniform Multi-Platform E-IDE driver [ 2.312765] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.342314] usb usb1: configuration #1 chosen from 1 choice [ 2.342344] hub 1-0:1.0: USB hub found [ 2.342355] hub 1-0:1.0: 3 ports detected [ 2.444892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.444895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.444898] usb usb1: Product: OHCI Host Controller [ 2.444899] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.444901] usb usb1: SerialNumber: 0000:00:12.0 [ 2.444957] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.444974] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.445027] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2 [ 2.445044] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 2.504866] usb usb2: configuration #1 chosen from 1 choice [ 2.504893] hub 2-0:1.0: USB hub found [ 2.504904] hub 2-0:1.0: 3 ports detected [ 2.624102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.624102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.624102] usb usb2: Product: OHCI Host Controller [ 2.624102] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.624102] usb usb2: SerialNumber: 0000:00:12.1 [ 2.624102] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.624102] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.624102] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3 [ 2.624102] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.684279] usb usb3: configuration #1 chosen from 1 choice [ 2.684302] hub 3-0:1.0: USB hub found [ 2.684311] hub 3-0:1.0: 3 ports detected [ 2.724312] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 2.796205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.796205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.796205] usb usb3: Product: OHCI Host Controller [ 2.796205] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 2.796205] usb usb3: SerialNumber: 0000:00:13.0 [ 2.796205] ahci 0000:00:11.0: version 3.0 [ 2.796205] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 2.924201] usb 1-3: configuration #1 chosen from 1 choice [ 2.992387] usb 1-3: New USB device found, idVendor=051d, idProduct=0002 [ 2.992390] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.992392] usb 1-3: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8 [ 2.992394] usb 1-3: Manufacturer: American Power Conversion [ 2.992395] usb 1-3: SerialNumber: 4B0727P12762 [ 3.848767] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 3.848771] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 3.852707] scsi0 : ahci [ 3.852707] scsi1 : ahci [ 3.852707] scsi2 : ahci [ 3.852707] scsi3 : ahci [ 3.852707] scsi4 : ahci [ 3.852707] scsi5 : ahci [ 3.852707] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 1277 [ 3.852707] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 1277 [ 3.852707] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 1277 [ 3.852707] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 1277 [ 3.852707] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 1277 [ 3.852707] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 1277 [ 4.437542] ata1: softreset failed (device not ready) [ 4.437635] ata1: failed due to HW bug, retry pmp=0 [ 4.601260] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.618181] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 4.618181] ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 4.618181] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.618181] ata1.00: configured for UDMA/133 [ 5.233061] ata2: softreset failed (device not ready) [ 5.233147] ata2: failed due to HW bug, retry pmp=0 [ 5.397066] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.409350] ata2.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 5.409350] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.409350] ata2.00: configured for UDMA/133 [ 6.025066] ata3: softreset failed (device not ready) [ 6.025152] ata3: failed due to HW bug, retry pmp=0 [ 6.237054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.249809] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.249809] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.249809] ata3.00: configured for UDMA/133 [ 6.733543] ata4: softreset failed (device not ready) [ 6.733629] ata4: failed due to HW bug, retry pmp=0 [ 6.897260] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.915933] ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.915933] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.915933] ata4.00: configured for UDMA/133 [ 7.365079] ata5: SATA link down (SStatus 0 SControl 300) [ 7.688452] ata6: SATA link down (SStatus 0 SControl 300) [ 7.688428] scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 1:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] scsi 3:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.688428] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.688428] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 7.688428] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 7.688428] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 7.828517] usb usb4: configuration #1 chosen from 1 choice [ 7.828543] hub 4-0:1.0: USB hub found [ 7.828553] hub 4-0:1.0: 3 ports detected [ 7.972441] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.972443] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.972445] usb usb4: Product: OHCI Host Controller [ 7.972447] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 7.972448] usb usb4: SerialNumber: 0000:00:13.1 [ 7.972539] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.972553] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 7.972596] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 7.972637] ehci_hcd 0000:00:12.2: debug port 1 [ 7.972656] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 7.972656] usb 1-3: USB disconnect, address 2 [ 7.984367] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.984423] usb usb5: configuration #1 chosen from 1 choice [ 7.984449] hub 5-0:1.0: USB hub found [ 7.984456] hub 5-0:1.0: 6 ports detected [ 8.108687] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.108689] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.108691] usb usb5: Product: EHCI Host Controller [ 8.108693] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd [ 8.108694] usb usb5: SerialNumber: 0000:00:12.2 [ 8.108787] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 8.108798] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 8.108838] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 8.108877] ehci_hcd 0000:00:13.2: debug port 1 [ 8.108894] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 8.120624] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.120678] usb usb6: configuration #1 chosen from 1 choice [ 8.120702] hub 6-0:1.0: USB hub found [ 8.120708] hub 6-0:1.0: 6 ports detected [ 8.252212] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.252215] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.252217] usb usb6: Product: EHCI Host Controller [ 8.252218] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd [ 8.252220] usb usb6: SerialNumber: 0000:00:13.2 [ 8.252251] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18 [ 8.252264] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 8.252306] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 8.252320] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 8.312211] usb usb7: configuration #1 chosen from 1 choice [ 8.312236] hub 7-0:1.0: USB hub found [ 8.312246] hub 7-0:1.0: 2 ports detected [ 8.416209] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.416211] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.416213] usb usb7: Product: OHCI Host Controller [ 8.416215] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 8.416217] usb usb7: SerialNumber: 0000:00:14.5 [ 8.416273] ATIIXP: IDE controller (0x1002:0x439c rev 0x00) at PCI slot 0000:00:14.1 [ 8.416285] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.416294] ATIIXP: not 100% native mode: will probe irqs later [ 8.416303] ide0: BM-DMA at 0xfa00-0xfa07 [ 8.416310] ATIIXP: simplex device: DMA disabled [ 8.416312] ide1: DMA disabled [ 8.416314] Probing IDE interface ide0... [ 8.627936] usb 1-3: new low speed USB device using ohci_hcd and address 3 [ 8.899798] usb 1-3: configuration #1 chosen from 1 choice [ 8.910662] usb 1-3: New USB device found, idVendor=051d, idProduct=0002 [ 8.910665] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 8.910667] usb 1-3: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8 [ 8.910669] usb 1-3: Manufacturer: American Power Conversion [ 8.910670] usb 1-3: SerialNumber: 4B0727P12762 [ 9.007826] Probing IDE interface ide1... [ 9.568339] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 9.568381] ide1 at 0x170-0x177,0x376 on irq 15 [ 9.624307] Driver 'sd' needs updating - please use bus_type methods [ 9.624307] sd 0:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204 MB) [ 9.624307] sd 0:0:0:0: [sda] Write Protect is off [ 9.624307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.624307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.624307] sd 0:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204 MB) [ 9.624307] sd 0:0:0:0: [sda] Write Protect is off [ 9.624307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.624307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.624307] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 9.670124] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.670212] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.670231] sd 1:0:0:0: [sdb] Write Protect is off [ 9.670234] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.670264] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.670317] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.670334] sd 1:0:0:0: [sdb] Write Protect is off [ 9.670336] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.670366] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.670368] sdb:<6>usbcore: registered new interface driver hiddev [ 9.691779] sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > [ 9.707777] sd 1:0:0:0: [sdb] Attached SCSI disk [ 9.707777] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.707777] sd 2:0:0:0: [sdc] Write Protect is off [ 9.707777] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.707777] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.707804] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.707804] sd 2:0:0:0: [sdc] Write Protect is off [ 9.707804] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.707804] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.707804] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 > [ 9.747779] sd 2:0:0:0: [sdc] Attached SCSI disk [ 9.747779] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.747779] sd 3:0:0:0: [sdd] Write Protect is off [ 9.747779] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.747779] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.747779] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) [ 9.747779] sd 3:0:0:0: [sdd] Write Protect is off [ 9.747779] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.747779] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.747779] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 > [ 9.799776] sd 3:0:0:0: [sdd] Attached SCSI disk [ 11.234244] hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:12.0-3 [ 11.234244] usbcore: registered new interface driver usbhid [ 11.234244] usbhid: v2.6:USB HID core driver [ 11.320058] md: raid1 personality registered for level 1 [ 11.322559] xor: automatically using best checksumming function: generic_sse [ 11.338847] generic_sse: 7712.000 MB/sec [ 11.338849] xor: using function: generic_sse (7712.000 MB/sec) [ 11.340512] async_tx: api initialized (async) [ 11.406967] raid6: int64x1 2275 MB/s [ 11.474864] raid6: int64x2 2913 MB/s [ 11.544304] raid6: int64x4 2937 MB/s [ 11.612675] raid6: int64x8 1990 MB/s [ 11.679278] raid6: sse2x1 3514 MB/s [ 11.747136] raid6: sse2x2 4615 MB/s [ 11.815508] raid6: sse2x4 4783 MB/s [ 11.815510] raid6: using algorithm sse2x4 (4783 MB/s) [ 11.815513] md: raid6 personality registered for level 6 [ 11.815514] md: raid5 personality registered for level 5 [ 11.815516] md: raid4 personality registered for level 4 [ 11.823229] md: md0 stopped. [ 11.887810] md: bind<sdb1> [ 11.887972] md: bind<sdc1> [ 11.888125] md: bind<sdd1> [ 11.888722] md: bind<sda1> [ 11.896724] raid1: raid set md0 active with 4 out of 4 mirrors [ 11.896724] md: md1 stopped. [ 11.965617] md: bind<sdb5> [ 11.965797] md: bind<sdc5> [ 11.965951] md: bind<sdd5> [ 11.966087] md: bind<sda5> [ 11.974843] raid5: device sda5 operational as raid disk 0 [ 11.974845] raid5: device sdd5 operational as raid disk 3 [ 11.974847] raid5: device sdc5 operational as raid disk 2 [ 11.974849] raid5: device sdb5 operational as raid disk 1 [ 11.976555] raid5: allocated 4274kB for md1 [ 11.976555] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 [ 11.976555] RAID5 conf printout: [ 11.976555] --- rd:4 wd:4 [ 11.976555] disk 0, o:1, dev:sda5 [ 11.976555] disk 1, o:1, dev:sdb5 [ 11.976555] disk 2, o:1, dev:sdc5 [ 11.976555] disk 3, o:1, dev:sdd5 [ 11.976555] md: md2 stopped. [ 11.996956] md: bind<sdb7> [ 11.997117] md: bind<sdc7> [ 11.997267] md: bind<sdd7> [ 11.997404] md: bind<sda7> [ 12.006154] raid5: device sda7 operational as raid disk 0 [ 12.006156] raid5: device sdd7 operational as raid disk 3 [ 12.006158] raid5: device sdc7 operational as raid disk 2 [ 12.006160] raid5: device sdb7 operational as raid disk 1 [ 12.008554] raid5: allocated 4274kB for md2 [ 12.008554] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2 [ 12.008554] RAID5 conf printout: [ 12.008554] --- rd:4 wd:4 [ 12.008554] disk 0, o:1, dev:sda7 [ 12.008554] disk 1, o:1, dev:sdb7 [ 12.008554] disk 2, o:1, dev:sdc7 [ 12.008554] disk 3, o:1, dev:sdd7 [ 12.116561] device-mapper: uevent: version 1.0.3 [ 12.116561] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 27.257800] PM: Starting manual resume from disk [ 27.291682] kjournald starting. Commit interval 5 seconds [ 27.291682] EXT3-fs: mounted filesystem with ordered data mode. [ 28.558029] udevd version 125 started [ 29.071834] input: Power Button (FF) as /class/input/input2 [ 29.136425] ACPI: Power Button (FF) [PWRF] [ 29.136624] input: Power Button (CM) as /class/input/input3 [ 29.199838] ACPI: Power Button (CM) [PWRB] [ 29.200138] ACPI: WMI: Mapper loaded [ 29.363634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.383634] shpchp: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 29.383634] shpchp: shpc_init: cannot reserve MMIO region [ 29.383762] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.438987] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 29.567200] input: PC Speaker as /class/input/input4 [ 29.678640] ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 29.678640] PCI: Setting latency timer of device 0000:01:05.1 to 64 [ 29.685369] Error: Driver 'pcspkr' is already registered, aborting... [ 29.767412] pnp: the driver 'parport_pc' has been registered [ 29.767412] parport_pc 00:09: reported by Plug and Play ACPI [ 29.767412] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 29.859458] parport_pc 00:09: driver attached [ 31.664694] EXT3 FS on dm-2, internal journal [ 32.366829] loop: module loaded [ 32.402030] it87: Found IT8718F chip at 0x228, revision 5 [ 32.405431] it87: in3 is VCC (+5V) [ 53.886200] kjournald starting. Commit interval 5 seconds [ 53.917449] EXT3 FS on md0, internal journal [ 53.920493] EXT3-fs: mounted filesystem with ordered data mode. [ 54.458313] kjournald starting. Commit interval 5 seconds [ 54.498157] EXT3 FS on dm-4, internal journal [ 54.501493] EXT3-fs: mounted filesystem with ordered data mode. [ 54.599968] Adding 1949688k swap on /dev/mapper/vglenny-lvswap. Priority:-1 extents:1 across:1949688k [ 55.735775] r8169: eth0: link up [ 55.742713] r8169: eth0: link up [ 56.360941] NET: Registered protocol family 10 [ 56.361478] lo: Disabled Privacy Extensions [ 57.146178] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e processors (2 cpu cores) (version 2.20.00) [ 57.146177] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0xe [ 57.146177] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xf [ 57.146177] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x11 [ 57.146177] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x13 [ 57.146177] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x15 [ 57.146177] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x16 [ 58.389720] Clocksource tsc unstable (delta = -290680939 ns) [ 60.160988] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 66.568728] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by video 24084 0 output 7808 1 video ac 9352 0 battery 16904 0 powernow_k8 17156 1 cpufreq_conservative 11784 0 cpufreq_userspace 8452 0 cpufreq_powersave 6400 0 cpufreq_stats 9120 0 cpufreq_ondemand 11792 1 freq_table 9344 3 powernow_k8,cpufreq_stats,cpufreq_ondemand ipv6 288328 22 it87 28696 0 hwmon_vid 7296 1 it87 loop 19468 0 parport_pc 31016 0 parport 41776 1 parport_pc snd_hda_intel 434776 0 pcspkr 7040 0 snd_pcm 81800 1 snd_hda_intel snd_timer 25744 1 snd_pcm k8temp 9216 0 snd 63688 3 snd_hda_intel,snd_pcm,snd_timer soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm i2c_piix4 13072 0 i2c_core 27936 1 i2c_piix4 shpchp 34080 0 pci_hotplug 32056 1 shpchp wmi 11712 0 button 11680 0 evdev 14208 0 ext3 124688 3 jbd 51240 1 ext3 mbcache 12804 1 ext3 sha256_generic 13696 0 aes_x86_64 12416 4 aes_generic 32552 1 aes_x86_64 cbc 7936 2 dm_crypt 17032 1 crypto_blkcipher 21636 4 cbc,dm_crypt dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_snapshot 19400 0 dm_mod 58864 15 dm_crypt,dm_mirror,dm_log,dm_snapshot raid456 125984 2 async_xor 8448 1 raid456 async_memcpy 6912 1 raid456 async_tx 11764 3 raid456,async_xor,async_memcpy xor 9744 2 raid456,async_xor raid1 24192 1 md_mod 80164 5 raid456,raid1 usbhid 45792 0 hid 41792 1 usbhid ff_memless 9224 1 usbhid sd_mod 29376 16 ata_generic 10116 0 ide_pci_generic 9220 0 [permanent] atiixp 8324 0 [permanent] ide_core 128284 2 ide_pci_generic,atiixp ahci 32520 12 libata 165472 2 ata_generic,ahci scsi_mod 160760 2 sd_mod,libata dock 14112 1 libata ehci_hcd 36108 0 ohci_hcd 25092 0 r8169 31492 0 thermal 22688 0 processor 42304 2 powernow_k8,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 1277 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp, ide-pci-generic, ata_generic 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc Device [1002:4383] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: fdb00000-fdbfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at ee00 [size=256] Region 2: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fdd00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f] Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fdefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1278 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fdf00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: Thank you! -- http://kaoso.org/impressum.xhtml
Attachment:
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil