Bug#499115: linux-image-2.6.24-etchnhalf.1-686: installation fails to run Lilo, causing hang on reboot
Package: linux-image-2.6.24-etchnhalf.1-686
Version: 2.6.24-6~etchnhalf.5
Severity: important
After installing the security update for linux-image-2.6.24-etchnhalf.1-686 dated Sept. 11, 2008, the system failed to boot the updated kernel. I use Lilo on this particular machine and on reboot, the system froze on the 'Loading Linux...' line.
I had previously updated other systems with the same kernel successfully, so I focused on the differences between those systems and this one. Since Lilo (instead of grub) was an obvious one, I manually ran the 'lilo' command to see if that would fix things. Sure enough, it did.
There's another bug report on this for the amd64 kernel (#496354) but I'm creating another one so that the bug doesn't get relegated to an amd64 quirk. I'm running a P4 2.8GHz CPU.
I know fewer people are using Lilo these days but it used to be the default boot loader for Debian. As such, upgraded systems will be particularly vulnerable to this bug. This system was originally installed with 'woody'.
Thanks.
Regards,
Ed
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.5) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Sep 8 06:19:11 UTC 2008
** Command line:
BOOT_IMAGE=Linux ro root=303
** Not tainted
** Kernel log:
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
8139cp 0000:02:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:02:06.0: Try the "8139too" driver instead.
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[ee001000-ee0017ff] Max Packet=[2048] IR/IT contexts=[8/8]
8139too Fast Ethernet driver 0.9.28
ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST340014A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bad0000b314]
hdc: DVD ROM DX-DVDR100, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xc000, 00:30:1b:ad:b2:b0, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem initialized
libata version 3.00 loaded.
hda: max request size: 512KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.102
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PS/2 Generic Mouse as /class/input/input4
intel8x0_measure_ac97_clock: measured 52754 usecs
intel8x0: clocking to 48000
Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 across:497972k
EXT3 FS on hda3, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 242212 16
nfs 228264 1
lockd 60968 2 nfs
nfs_acl 3584 1 nfs
sunrpc 171484 10 nfs,lockd,nfs_acl
nls_iso8859_1 4224 1
nls_cp437 5888 1
vfat 12384 1
fat 48924 1 vfat
dm_snapshot 17060 0
dm_mirror 21792 0
dm_mod 56004 2 dm_snapshot,dm_mirror
snd_intel8x0 32092 3
snd_ac97_codec 93348 1 snd_intel8x0
ac97_bus 2240 1 snd_ac97_codec
snd_pcm_oss 38368 0
snd_pcm 72036 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_mixer_oss 15424 1 snd_pcm_oss
snd_seq_dummy 3844 0
snd_seq_oss 29632 0
snd_seq_midi 8256 0
snd_rawmidi 22816 1 snd_seq_midi
snd_seq_midi_event 7040 2 snd_seq_oss,snd_seq_midi
snd_seq 46736 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21348 3 snd_pcm,snd_seq
snd_seq_device 7948 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 36656 0
i2c_i801 9456 0
intel_agp 23540 1
snd 48772 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button 8528 0
i2c_core 22656 1 i2c_i801
evdev 11200 1
shpchp 31220 0
pci_hotplug 27840 1 shpchp
serio_raw 6788 0
agpgart 31912 1 intel_agp
soundcore 7680 1 snd
snd_page_alloc 10184 2 snd_intel8x0,snd_pcm
parport_pc 26340 0
parport 34472 1 parport_pc
iTCO_wdt 11396 0
rtc 13148 0
floppy 54724 0
pcspkr 3264 0
ext3 123272 2
jbd 43892 1 ext3
mbcache 8480 1 ext3
ide_generic 1280 0 [permanent]
ide_cd 36352 0
cdrom 32672 1 ide_cd
ide_disk 15776 5
ata_generic 7556 0
libata 144560 1 ata_generic
scsi_mod 141516 1 libata
8139too 25728 0
piix 7556 0 [permanent]
ohci1394 30192 0
generic 4484 0 [permanent]
ieee1394 85112 1 ohci1394
8139cp 22048 0
mii 5344 2 8139too,8139cp
ide_core 108740 5 ide_generic,ide_cd,ide_disk,piix,generic
ehci_hcd 32556 0
uhci_hcd 23568 0
usbcore 127724 3 ehci_hcd,uhci_hcd
thermal 16092 0
processor 36840 1 thermal
fan 4868 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d800 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d000 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ee000000-ee0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:fb50]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 0500 [size=32]
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device [1297:c140]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e400 [size=64]
Region 2: Memory at ee101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ee102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at ed000000 [disabled] [size=128K]
Capabilities: <access denied>
02:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
02:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: Unknown device [9712:25f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ee001000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at c400 [size=128]
Capabilities: <access denied>
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-2.6.24-etchnhalf.1-686: false
linux-image-2.6.24-etchnhalf.1-686/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/initrd-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-install-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/prerm/removing-running-kernel-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/old-initrd-link-2.6.24-etchnhalf.1-686: true
* linux-image-2.6.24-etchnhalf.1-686/preinst/bootloader-initrd-2.6.24-etchnhalf.1-686: false
linux-image-2.6.24-etchnhalf.1-686/preinst/elilo-initrd-2.6.24-etchnhalf.1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-etchnhalf.1-686/preinst/abort-overwrite-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/overwriting-modules-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/postinst/old-system-map-link-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-686: false
linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-initrd-2.6.24-etchnhalf.1-686: true
linux-image-2.6.24-etchnhalf.1-686/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-test-error-2.6.24-etchnhalf.1-686:
linux-image-2.6.24-etchnhalf.1-686/postinst/create-kimage-link-2.6.24-etchnhalf.1-686: true
Reply to: