Bug#463253: linux-image-2.6.24-1-amd64: Bring back /proc/acpi
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-1
Severity: important
Since linux 2.6.24 introduced a sysfs interface for ACPI power
information, you have removed the interface that used to be in /proc
(controlled by CONFIG_ACPI_PROCFS_POWER). This breaks many battery
monitors in Debian, because nobody's rewritten their battery monitor
to use the /sys interface yet. Please resurrect the /proc interface.
--Ken Bloom
-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-1) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Jan 28 00:33:42 UTC 2008
** Command line:
root=/dev/hda1 ro console=tty0 resume=/dev/hda2
** Not tainted
** Kernel log:
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc20000174000, 00:c0:9f:b2:ff:35, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem initialized
libata version 3.00 loaded.
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x64
Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input7
Yenta: ISA IRQ mask 0x0ee8, PCI irq 17
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
ACPI: AC Adapter [ACAD] (on-line)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: PCI Interrupt 0000:05:09.3[A] -> GSI 17 (level, low) -> IRQ 17
sdhci: SDHCI controller found at 0000:05:09.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 17 (level, low) -> IRQ 17
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xc0209400 irq 17 DMA
sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc1: SDHCI at 0xc0209000 irq 17 DMA
sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
mmc2: SDHCI at 0xc0208400 irq 17 DMA
ACPI: Battery Slot [BAT1] (battery present)
input: Video Bus as /class/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'simple'
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
MC'97 0 converters and GPIO not ready (0x1)
Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 across:1052248k
EXT3 FS on hda1, internal journal
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-28 processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
fuse init (API version 7.9)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Clocksource tsc unstable (delta = -82160814 ns)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized radeon 1.28.0 20060524 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
input: b43-phy0 as /class/input/input9
Registered led device: b43-phy0:radio
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1c:f0:55:0b:c1
wlan0: RX authentication from 00:1c:f0:55:0b:c1 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1c:f0:55:0b:c1
wlan0: authentication frame received from 00:1c:f0:55:0b:c1, but not in authenticate state - ignored
wlan0: RX deauthentication from 00:1c:f0:55:0b:c1 (reason=6)
wlan0: deauthenticated
wlan0: authenticate with AP 00:1c:f0:55:0b:c1
wlan0: RX authentication from 00:1c:f0:55:0b:c1 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1c:f0:55:0b:c1
wlan0: RX AssocResp from 00:1c:f0:55:0b:c1 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1c:f0:55:0b:c1)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: CTS protection enabled (BSSID=00:1c:f0:55:0b:c1)
wlan0: CTS protection disabled (BSSID=00:1c:f0:55:0b:c1)
** Loaded modules:
Module Size Used by
rfkill_input 9600 0
radeon 123552 2
drm 98728 3 radeon
ipv6 286248 21
ppdev 13832 0
parport_pc 42408 0
lp 17476 0
parport 44812 3 ppdev,parport_pc,lp
dm_snapshot 21960 0
dm_mirror 27008 0
dm_mod 67832 2 dm_snapshot,dm_mirror
fuse 53680 1
cpufreq_userspace 9604 1
powernow_k8 18464 0
freq_table 9728 1 powernow_k8
ide_generic 5632 0 [permanent]
joydev 17536 0
arc4 6528 2
snd_atiixp_modem 21516 0
ecb 8192 2
blkcipher 11780 1 ecb
snd_atiixp 25748 0
snd_ac97_codec 118232 2 snd_atiixp_modem,snd_atiixp
ac97_bus 6912 1 snd_ac97_codec
snd_pcm_oss 46624 0
snd_pcm 89352 4 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
b43 119976 0
rfkill 12816 3 rfkill_input,b43
snd_mixer_oss 21376 1 snd_pcm_oss
mac80211 132236 1 b43
cfg80211 19856 1 mac80211
led_class 10120 1 b43
video 25620 0
output 8704 1 video
snd_seq_dummy 8580 0
input_polldev 9872 1 b43
battery 14336 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_rawmidi 30624 1 snd_seq_midi
sdhci 23172 0
ac 9472 0
tifm_7xx1 12672 0
snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi
mmc_core 58760 1 sdhci
tifm_core 16008 1 tifm_7xx1
snd_seq 58752 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
yenta_socket 31756 1
rsrc_nonstatic 16128 1 yenta_socket
snd_timer 28552 2 snd_pcm,snd_seq
snd_seq_device 12948 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 11908 0
button 13984 0
snd 65896 11 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_piix4 13708 0
psmouse 45724 0
k8temp 10496 0
soundcore 13216 1 snd
snd_page_alloc 15248 3 snd_atiixp_modem,snd_atiixp,snd_pcm
shpchp 38428 0
pci_hotplug 35504 1 shpchp
i2c_core 29824 1 i2c_piix4
evdev 17024 8
pcspkr 7808 0
ext3 139024 1
jbd 55976 1 ext3
mbcache 13952 1 ext3
ide_cd 44704 0
cdrom 39464 1 ide_cd
ide_disk 20992 3
ata_generic 13060 0
libata 162736 1 ata_generic
scsi_mod 170296 1 libata
8139too 33024 0
atiixp 9488 0 [permanent]
firewire_ohci 24192 0
firewire_core 49472 1 firewire_ohci
crc_itu_t 6656 1 firewire_core
ssb 39428 1 b43
pcmcia 45720 2 b43,ssb
pcmcia_core 46500 4 b43,yenta_socket,rsrc_nonstatic,pcmcia
firmware_class 15232 2 b43,pcmcia
8139cp 28672 0
mii 10240 2 8139too,8139cp
generic 9732 0 [permanent]
ide_core 144920 5 ide_generic,ide_cd,ide_disk,atiixp,generic
ehci_hcd 39692 0
ohci_hcd 28164 0
thermal 22688 0
processor 45032 3 powernow_k8,thermal
fan 9864 0
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 01)
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 11)
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8400 [size=16]
Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI IDE Controller [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8410 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
Kernel modules: generic, atiixp, ata_generic
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377]
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=09, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ATI IXP AC97 controller
Kernel modules: snd-atiixp
00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller [1002:4378] (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ATI IXP MC97 controller
Kernel modules: snd-atiixp-modem
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c0208000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
05:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:1355]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
05:09.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
05:09.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at c0208800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
05:09.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
05:09.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: Hewlett-Packard Company Unknown device [103c:3091]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0209400 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c0209000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at c0208400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.24-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.18 Debian configuration management sy
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-25 Yet Another mkInitRD
linux-image-2.6.24-1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
Reply to: