Bug#463104: badness at net/core/dev.c
Package: linux-image-2.6.24-1-powerpc64
Version: 2.6.24-1
Severity: normal
This report is from a Powermac G5 (machine: PowerMac7,3).
Shortly after booting linux-image-2.6.24-1-powerpc64, the kernel throws the
following message, but the network seems to continue to work.
Badness at net/core/dev.c:2199
NIP: c0000000002ef828 LR: c0000000002ef808 CTR: c0000000002e8600
REGS: c00000007b123640 TRAP: 0700 Not tainted (2.6.24-1-powerpc64)
MSR: 9000000000029032 <EE,ME,IR,DR> CR: 44ffff24 XER: 200fffff
TASK = c00000007b0f6040[0] 'swapper' THREAD: c00000007b120000 CPU: 1
GPR00: 0000000000000001 c00000007b1238c0 c000000000529ee0 000000000000004a
GPR04: 00000000000005a8 00000000000005a8 0000000000000000 0000000000000010
GPR08: 0000000000000013 c0000000005a93cc 0000000000000003 d000080083780000
GPR12: d000000000315040 c000000000485980 00000000f8000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000001 00000000ffff67d1 000000000000012c 0000000000000000
GPR28: c0000000005fa1b0 0000000000000040 c0000000004dcca8 c0000000780fc748
NIP [c0000000002ef828] .net_rx_action+0x114/0x280
LR [c0000000002ef808] .net_rx_action+0xf4/0x280
Call Trace:
[c00000007b1238c0] [c0000000002ef808] .net_rx_action+0xf4/0x280 (unreliable)
[c00000007b123970] [c00000000005e998] .__do_softirq+0xa8/0x164
[c00000007b123a10] [c00000000000be4c] .do_softirq+0x4c/0x7c
[c00000007b123a90] [c00000000005eb08] .irq_exit+0x60/0xb0
[c00000007b123b10] [c00000000000c5d0] .do_IRQ+0xbc/0xec
[c00000007b123b90] [c000000000004790] hardware_interrupt_entry+0x18/0x1c
--- Exception: 501 at .cpu_idle+0x110/0x1f0
LR = .cpu_idle+0x110/0x1f0
[c00000007b123e80] [c000000000010fec] .cpu_idle+0x64/0x1f0 (unreliable)
[c00000007b123f00] [c0000000000280ac] .start_secondary+0x164/0x188
[c00000007b123f90] [c0000000000083c0] .start_secondary_prolog+0xc/0x10
Instruction dump:
7d6903a6 e8490008 e9690010 4e800421 e8410028 7f83e800 40bd0030 e93e82c8
80090000 7c000034 5400d97e 78000020 <0b000000> 2fa00000 41be0010 e93e82c8
Let me know about any other information you need,
Mark
-- Package-specific info:
** Version:
Linux version 2.6.24-1-powerpc64 (Debian 2.6.24-1) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sat Jan 26 12:02:02 CET 2008
** Command line:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-1.3: new low speed USB device using ehci_hcd and address 5
usb 5-1.3: configuration #1 chosen from 1 choice
eth0: Link is up at 1000 Mbps, full-duplex.
usb 5-4.2: new full speed USB device using ehci_hcd and address 6
usb 5-4.2: configuration #1 chosen from 1 choice
usb 5-1.1.1: new low speed USB device using ehci_hcd and address 7
usb 5-1.1.1: configuration #1 chosen from 1 choice
usb 5-1.1.3: new full speed USB device using ehci_hcd and address 8
usb 5-1.1.3: configuration #1 chosen from 1 choice
hiddev0hidraw0: USB HID v1.11 Device [Apple Cinema Display] on usb-0001:02:0b.2-1.3
hiddev1hidraw1: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema Display] on usb-0001:02:0b.2-4.2
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:02:0b.2-1.1.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
input,hidraw3: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.2-1.1.3
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input4
input,hidraw4: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.2-1.1.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
agpgart: Detected Apple U3H chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
snd-aoa-fabric-layout: found bus with layout 36
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-codec-tas: found 'deq' node
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
EXT3 FS on sda5, internal journal
snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
eth0: Link is up at 1000 Mbps, full-duplex.
eth0: Pause is disabled
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Putting AGP V3 device at 0000:f0:0b.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:f0:10.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/0
ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/0
ioctl32(xfce4-terminal:4032): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/0
ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/1
ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/1
ioctl32(xfce4-terminal:4126): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/1
ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/2
ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/2
ioctl32(xfce4-terminal:4132): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/2
------------[ cut here ]------------
Badness at net/core/dev.c:2199
NIP: c0000000002ef828 LR: c0000000002ef808 CTR: c0000000002e8600
REGS: c00000007b123640 TRAP: 0700 Not tainted (2.6.24-1-powerpc64)
MSR: 9000000000029032 <EE,ME,IR,DR> CR: 44ffff24 XER: 200fffff
TASK = c00000007b0f6040[0] 'swapper' THREAD: c00000007b120000 CPU: 1
GPR00: 0000000000000001 c00000007b1238c0 c000000000529ee0 000000000000004a
GPR04: 00000000000005a8 00000000000005a8 0000000000000000 0000000000000010
GPR08: 0000000000000013 c0000000005a93cc 0000000000000003 d000080083780000
GPR12: d000000000315040 c000000000485980 00000000f8000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000001 00000000ffff67d1 000000000000012c 0000000000000000
GPR28: c0000000005fa1b0 0000000000000040 c0000000004dcca8 c0000000780fc748
NIP [c0000000002ef828] .net_rx_action+0x114/0x280
LR [c0000000002ef808] .net_rx_action+0xf4/0x280
Call Trace:
[c00000007b1238c0] [c0000000002ef808] .net_rx_action+0xf4/0x280 (unreliable)
[c00000007b123970] [c00000000005e998] .__do_softirq+0xa8/0x164
[c00000007b123a10] [c00000000000be4c] .do_softirq+0x4c/0x7c
[c00000007b123a90] [c00000000005eb08] .irq_exit+0x60/0xb0
[c00000007b123b10] [c00000000000c5d0] .do_IRQ+0xbc/0xec
[c00000007b123b90] [c000000000004790] hardware_interrupt_entry+0x18/0x1c
--- Exception: 501 at .cpu_idle+0x110/0x1f0
LR = .cpu_idle+0x110/0x1f0
[c00000007b123e80] [c000000000010fec] .cpu_idle+0x64/0x1f0 (unreliable)
[c00000007b123f00] [c0000000000280ac] .start_secondary+0x164/0x188
[c00000007b123f90] [c0000000000083c0] .start_secondary_prolog+0xc/0x10
Instruction dump:
7d6903a6 e8490008 e9690010 4e800421 e8410028 7f83e800 40bd0030 e93e82c8
80090000 7c000034 5400d97e 78000020 <0b000000> 2fa00000 41be0010 e93e82c8
ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7108c) on /dev/pts/3
ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe71094) on /dev/pts/3
ioctl32(xfce4-terminal:4370): Unknown cmd fd(0) cmd(0000530b){t:'S';sz:0} arg(0fe7109c) on /dev/pts/3
** Loaded modules:
Module Size Used by
radeon 172384 2
drm 146672 3 radeon
lp 22732 0
parport 63400 1 lp
nfs 391480 8
lockd 108272 1 nfs
nfs_acl 9640 1 nfs
sunrpc 284488 19 nfs,lockd,nfs_acl
dm_snapshot 33144 0
dm_mirror 39588 0
dm_mod 102632 2 dm_snapshot,dm_mirror
snd_powermac 86696 0
ide_disk 28912 0
snd_aoa_codec_tas 25200 2
snd_aoa_fabric_layout 23048 2
snd_aoa 31716 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
snd_aoa_i2sbus 37340 1
snd_aoa_soundbus 14876 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
snd_pcm_oss 69784 0
snd_mixer_oss 31056 1 snd_pcm_oss
snd_pcm 135548 4 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss
snd_page_alloc 19648 1 snd_pcm
snd_timer 40904 2 snd_pcm
snd 99680 11 snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 16240 1 snd
uninorth_agp 19464 1
agpgart 57292 2 drm,uninorth_agp
evdev 23680 2
ext3 201272 1
jbd 83880 1 ext3
mbcache 18164 1 ext3
sd_mod 43112 2
ata_generic 14380 0
sata_svw 18204 1
libata 213136 2 ata_generic,sata_svw
scsi_mod 233776 2 sd_mod,libata
usbhid 67440 0
hid 55608 1 usbhid
ff_memless 12872 1 usbhid
generic 10484 0 [permanent]
ehci_hcd 58460 0
sungem 56788 0
sungem_phy 22704 1 sungem
ide_cd 60296 0
cdrom 51448 1 ide_cd
firewire_ohci 37520 0
firewire_core 71100 1 firewire_ohci
crc_itu_t 6832 1 firewire_core
windfarm_pid 8432 0
therm_pm72 40060 0
i2c_powermac 12432 0
** PCI devices:
0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3H AGP Bridge [106b:0059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: [80] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans+ 64bit+ FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit+ FW- Rate=x8
0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 90020000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=00:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=1 UnitCnt=2 MastHost- DefDir-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 1.02
0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=00:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=3 UnitCnt=5 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.04
Link Frequency 0: 400MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM+ ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [90] HyperTransport: Interrupt Discovery and Configuration
0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] HyperTransport: Revision ID: 1.04
0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 80200000-802fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] HyperTransport: Revision ID: 1.04
0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: 80300000-805fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] HyperTransport: Revision ID: 1.04
0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: 80600000-806fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [70] HyperTransport: Revision ID: 1.04
0001:01:07.0 Unknown class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:01:08.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
0001:01:09.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:03:0d.0 Unknown class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at 80204000 (32-bit, non-prefetchable) [size=16K]
0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042] (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. Unknown device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
0001:04:0f.0 Ethernet controller [0200]: Apple Computer Inc. K2 GMAC (Sun GEM) [106b:004c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at 80300000 [disabled] [size=1M]
0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Interrupt: pin ? routed to IRQ 17
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K]
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: powerpc (ppc64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-1-powerpc64
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.24-1-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85h tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
linux-image-2.6.24-1-powerpc64 recommends no packages.
-- debconf information:
linux-image-2.6.24-1-powerpc64/preinst/bootloader-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/abort-install-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/postinst/bootloader-error-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-powerpc64/preinst/overwriting-modules-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/initrd-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/lilo-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/failed-to-move-modules-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/prerm/removing-running-kernel-2.6.24-1-powerpc64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-powerpc64/postinst/old-dir-initrd-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/depmod-error-initrd-2.6.24-1-powerpc64: false
linux-image-2.6.24-1-powerpc64/postinst/old-initrd-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/old-system-map-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-powerpc64/postinst/create-kimage-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/depmod-error-2.6.24-1-powerpc64: false
linux-image-2.6.24-1-powerpc64/postinst/bootloader-test-error-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/abort-overwrite-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/elilo-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc64: true
Reply to: