Bug#451025: marked as done (ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts)

To: Pascal Volk <user@localhost.localdomain.org>
Subject: Bug#451025: marked as done (ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Tue, 20 Nov 2007 20:15:12 +0000
Message-id: <[🔎] handler.451025.D451025.119558956130302.ackdone@bugs.debian.org>
References: <47433FBE.6020906@localhost.localdomain.org> <[🔎] 20071112223830.5027.5324.reportbug@el-negro.edelhost.de>

Your message dated Tue, 20 Nov 2007 21:12:46 +0100
with message-id <47433FBE.6020906@localhost.localdomain.org>
and subject line [solved] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts
From: Pascal Volk <user@localhost.localdomain.org>
Date: Mon, 12 Nov 2007 23:38:30 +0100
Message-id: <[🔎] 20071112223830.5027.5324.reportbug@el-negro.edelhost.de>
Reply-to: Pascal Volk <user@localhost.localdomain.org>

Package: linux-image-2.6.22-2-amd64
Version: 2.6.22-4
Severity: normal

When smartd starts up the kernel logs a lot of exceptions. Smartd can only
collect information from /dev/sda, not from /dev/sdb.

HDD information for /dev/sda and /dev/sdb:
ATA device, with non-removable media
        Model Number:       WDC WD5000ABYS-01TNA0                   
        Serial Number:      WD-WCAPW[snipped]
        Firmware Revision:  12.01C01

Storage Controller:
IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
on a Supermicro PDSMU board.

-- Package-specific info:
** Version:
Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 02:15:40 UTC 2007

** Not tainted

** Kernel log:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete

** Loaded modules:
Module                  Size  Used by
ipv6                  296840  10 
ipt_REJECT              9216  2 
xt_tcpudp               7808  2 
iptable_filter          7552  1 
ip_tables              24680  1 iptable_filter
x_tables               24712  3 ipt_REJECT,xt_tcpudp,ip_tables
button                 13472  0 
ac                     10376  0 
battery                15496  0 
dm_snapshot            21320  0 
dm_mirror              26240  0 
dm_mod                 64112  2 dm_snapshot,dm_mirror
coretemp               12544  0 
w83627hf               33048  0 
w83793                 42264  0 
hwmon_vid               7296  2 w83627hf,w83793
loop                   23044  0 
iTCO_wdt               15824  0 
i2c_i801               13468  0 
evdev                  15232  0 
i2c_core               31488  2 w83793,i2c_i801
pcspkr                  7680  0 
ext3                  137232  3 
jbd                    68080  1 ext3
mbcache                13832  1 ext3
raid1                  27520  3 
md_mod                 83996  5 raid1
ide_generic             5504  0 [permanent]
ide_cd                 44832  0 
cdrom                  39848  1 ide_cd
sd_mod                 33280  10 
piix                   14980  0 [permanent]
generic                10372  0 [permanent]
ide_core              147728  4 ide_generic,ide_cd,piix,generic
ata_piix               19844  10 
ata_generic            13188  0 
ehci_hcd               37900  0 
e1000                 127552  0 
libata                132016  2 ata_piix,ata_generic
scsi_mod              164536  2 sd_mod,libata
uhci_hcd               29856  0 
thermal                19600  0 
processor              39784  1 thermal
fan                     9992  0 

** PCI devices:
not available


-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-2-amd64 depends on:
ii  e2fsprogs                    1.40.2-1    ext2 file system utilities and lib
ii  initramfs-tools [linux-initr 0.90a       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.22-2-amd64 recommends no packages.

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.22-2-amd64/preinst/initrd-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/prerm/would-invalidate-boot-loader-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/already-running-this-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/preinst/bootloader-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/old-system-map-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/old-initrd-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.22-2-amd64/prerm/removing-running-kernel-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/abort-install-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/bootloader-test-error-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/preinst/lilo-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/elilo-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.22-2-amd64/preinst/failed-to-move-modules-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/old-dir-initrd-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/depmod-error-initrd-2.6.22-2-amd64: false
  linux-image-2.6.22-2-amd64/preinst/overwriting-modules-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/depmod-error-2.6.22-2-amd64: false
  linux-image-2.6.22-2-amd64/preinst/abort-overwrite-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/bootloader-error-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/create-kimage-link-2.6.22-2-amd64: true

--- End Message ---

--- Begin Message ---

To: 451025-done@bugs.debian.org

Subject: [solved] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

From: Pascal Volk <user@localhost.localdomain.org>

Date: Tue, 20 Nov 2007 21:12:46 +0100

Message-id: <47433FBE.6020906@localhost.localdomain.org>

Reply-to: Pascal Volk <user@localhost.localdomain.org>
Sorry for this noice.
After upgrading smartmontools from 5.37-5 to 5.37-6 all the trouble is gone.


Regards,
Pascal
--- End Message ---

Reply to:

References:
- Bug#451025: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts
  - From: Pascal Volk <user@localhost.localdomain.org>

Prev by Date: Bug#451367: installation-reports: Does not allow ethernet over firewire
Next by Date: Bug#451367: installation-reports: Does not allow ethernet over firewire
Previous by thread: Bug#451025: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts
Next by thread: Bug#451025: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts
Index(es):
- Date
- Thread