[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#451025: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen, when smartd starts



Package: linux-image-2.6.22-2-amd64
Version: 2.6.22-4
Severity: normal

When smartd starts up the kernel logs a lot of exceptions. Smartd can only
collect information from /dev/sda, not from /dev/sdb.

HDD information for /dev/sda and /dev/sdb:
ATA device, with non-removable media
        Model Number:       WDC WD5000ABYS-01TNA0                   
        Serial Number:      WD-WCAPW[snipped]
        Firmware Revision:  12.01C01

Storage Controller:
IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
on a Supermicro PDSMU board.

-- Package-specific info:
** Version:
Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 02:15:40 UTC 2007

** Not tainted

** Kernel log:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
         res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
         res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete

** Loaded modules:
Module                  Size  Used by
ipv6                  296840  10 
ipt_REJECT              9216  2 
xt_tcpudp               7808  2 
iptable_filter          7552  1 
ip_tables              24680  1 iptable_filter
x_tables               24712  3 ipt_REJECT,xt_tcpudp,ip_tables
button                 13472  0 
ac                     10376  0 
battery                15496  0 
dm_snapshot            21320  0 
dm_mirror              26240  0 
dm_mod                 64112  2 dm_snapshot,dm_mirror
coretemp               12544  0 
w83627hf               33048  0 
w83793                 42264  0 
hwmon_vid               7296  2 w83627hf,w83793
loop                   23044  0 
iTCO_wdt               15824  0 
i2c_i801               13468  0 
evdev                  15232  0 
i2c_core               31488  2 w83793,i2c_i801
pcspkr                  7680  0 
ext3                  137232  3 
jbd                    68080  1 ext3
mbcache                13832  1 ext3
raid1                  27520  3 
md_mod                 83996  5 raid1
ide_generic             5504  0 [permanent]
ide_cd                 44832  0 
cdrom                  39848  1 ide_cd
sd_mod                 33280  10 
piix                   14980  0 [permanent]
generic                10372  0 [permanent]
ide_core              147728  4 ide_generic,ide_cd,piix,generic
ata_piix               19844  10 
ata_generic            13188  0 
ehci_hcd               37900  0 
e1000                 127552  0 
libata                132016  2 ata_piix,ata_generic
scsi_mod              164536  2 sd_mod,libata
uhci_hcd               29856  0 
thermal                19600  0 
processor              39784  1 thermal
fan                     9992  0 

** PCI devices:
not available


-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-2-amd64 depends on:
ii  e2fsprogs                    1.40.2-1    ext2 file system utilities and lib
ii  initramfs-tools [linux-initr 0.90a       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.22-2-amd64 recommends no packages.

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.22-2-amd64/preinst/initrd-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/prerm/would-invalidate-boot-loader-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/already-running-this-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/preinst/bootloader-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/old-system-map-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/old-initrd-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.22-2-amd64/prerm/removing-running-kernel-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/abort-install-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/bootloader-test-error-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/preinst/lilo-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/preinst/elilo-initrd-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.22-2-amd64/preinst/failed-to-move-modules-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/old-dir-initrd-link-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/depmod-error-initrd-2.6.22-2-amd64: false
  linux-image-2.6.22-2-amd64/preinst/overwriting-modules-2.6.22-2-amd64: true
  linux-image-2.6.22-2-amd64/postinst/depmod-error-2.6.22-2-amd64: false
  linux-image-2.6.22-2-amd64/preinst/abort-overwrite-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/bootloader-error-2.6.22-2-amd64:
  linux-image-2.6.22-2-amd64/postinst/create-kimage-link-2.6.22-2-amd64: true




Reply to: