[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#411150: linux-image-2.6.18-4-686: hangs in ACPI during boot on Sony Vaio PCG-Z600LEK

Package: linux-image-2.6.18-4-686
Version: 2.6.18.dfsg.1-10
Severity: important

All the versions of linux-image-2.6.18-*-686 that I have tried normally
hang when booting on my Sony Vaio PCG-Z600LEK. Last time I had to boot
4 times before the machine booted correctly. I have to poweroff between
each boot attempt.

linux-image-2.6.16-2-686 boots everytime.

The first time the boot hung after these lines:
	PIIX4 devres I PIO at 0398-0399
	PIIX4 devres J PIO at 0398-0399
	ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode
The second time it hung after:
	ACPI: Using PIC for interrupt routing
	ACPI: PCI Root Bridge [PCI0] (0000:00)
	ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
The third time it hung after:
	Linux Plug and Play Support v0.97 (c) Adam Belay
	pnp: PnP ACPI init

When the machine booted correctly (on the 4th attempt) dmesg said

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable)
 BIOS-e820: 0000000003ff0000 - 0000000003fff800 (ACPI data)
 BIOS-e820: 0000000003fff800 - 0000000004000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
63MB LOWMEM available.
On node 0 totalpages: 16368
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 12272 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 SONY                                  ) @ 0x000f6bb0
ACPI: RSDT (v001 SONY   Z3       0x20001225 PTL  0x00000000) @ 0x03ffc1ca
ACPI: FADT (v001 SONY   Z3       0x20001225 PTL  0x000f4240) @ 0x03fff764
ACPI: BOOT (v001 SONY   Z3       0x20001225 PTL  0x00000001) @ 0x03fff7d8
ACPI: DSDT (v001   SONY  Z3      0x20001225 MSFT 0x01000007) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 04000000:fbf80000)
Detected 694.900 MHz processor.
Built 1 zonelists.  Total pages: 16368
Kernel command line: root=/dev/hda2 ro 
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01089000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 57068k/65472k available (1544k kernel code, 7996k reserved, 577k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1390.86 BogoMIPS (lpj=2781723)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel Pentium III (Coppermine) stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 4746k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 8000-803f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PIIX4 devres I PIO at 0398-0399
PIIX4 devres J PIO at 0398-0399
PCI: Firmware left 0000:00:0b.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x398-0x399 has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x1040-0x104f has been reserved
pnp: 00:01: ioport range 0x8000-0x804f could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: fd000000-febfffff
  PREFETCH window: 14000000-140fffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:0c.0 to 64
ACPI: (supports S0<6>Time: tsc clocksource has been installed.
 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [ATF0] (51 C)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcb0-0xfcb7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcb8-0xfcbf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
ieee1394: Initialized config rom entry `ip1394'
usbcore: registered new driver usbfs
usbcore: registered new driver hub
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
USB Universal Host Controller Interface driver v3.0
hda: HITACHI_DK23BA-15, ATA DISK drive
Time: acpi_pm clocksource has been installed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
PCI: Enabling device 0000:00:08.0 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[fecfe000-fecfe7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xfecff000, irq 9, MAC addr 08:00:46:0E:B7:96
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
PCI: Enabling device 0000:00:09.0 (0006 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (CM) [PWRB]

-- System Information:
Debian Release: 4.0
  APT prefers unstable
  APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=C, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)

Versions of packages linux-image-2.6.18-4-686 depends on:
ii  coreutils                     5.97-5.3   The GNU core utilities
ii  debconf [debconf-2.0]         1.5.11     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.85e      tools for generating an initramfs
ii  module-init-tools             3.3-pre4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.18-4-686 recommends:
pn  libc6-i686                    <none>     (no description available)

-- debconf information:
  linux-image-2.6.18-4-686/preinst/lilo-initrd-2.6.18-4-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.18-4-686/preinst/elilo-initrd-2.6.18-4-686: true
  linux-image-2.6.18-4-686/preinst/overwriting-modules-2.6.18-4-686: true
  linux-image-2.6.18-4-686/prerm/removing-running-kernel-2.6.18-4-686: true
  linux-image-2.6.18-4-686/prerm/would-invalidate-boot-loader-2.6.18-4-686: true
  linux-image-2.6.18-4-686/postinst/old-system-map-link-2.6.18-4-686: true
  linux-image-2.6.18-4-686/postinst/depmod-error-2.6.18-4-686: false
  linux-image-2.6.18-4-686/postinst/depmod-error-initrd-2.6.18-4-686: false
  linux-image-2.6.18-4-686/postinst/old-initrd-link-2.6.18-4-686: true
  linux-image-2.6.18-4-686/preinst/bootloader-initrd-2.6.18-4-686: true
  linux-image-2.6.18-4-686/postinst/create-kimage-link-2.6.18-4-686: true
  linux-image-2.6.18-4-686/postinst/old-dir-initrd-link-2.6.18-4-686: true

Reply to: