[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#315110: marked as done (kernel-image-2.4.27-2-686: Module smc-ircc too verbose in dmesg when irda-utils in discovery mode.)

Your message dated Thu, 22 Jun 2006 13:14:36 +0200 (MEST)
with message-id <61013.15.195.185.76.1150974876.squirrel@my.bawue.de>
and subject line kernel-image-2.4.27-2-686: irda driver smsc-ircc2 under      kernel-image-2.6.8doesn't seem to work.
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: kernel-image-2.4.27-2-686
Version: 2.4.27-10
Severity: normal


Hi,

I needed to set irda-utils to discovery mode (using 'dpkg-reconfigure
irda-utils') and since then the smc-ircc module is sending continuously
the following one-line to dmesg:

irport_hard_xmit_Rac256893()

so that nothing meaningful remains in the buffer.

Relevant part of /etc/modutils/irda-utils:
# For FIR device

options smc-ircc ircc_dma=3 ircc_irq=7 ircc_cfg=0x4e ircc_sir=0x3e8 ircc_fir=0x130
alias irda0 smc-ircc

Thanks, Eric

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)

Versions of packages kernel-image-2.4.27-2-686 depends on:
ii  coreutils [fileutils]         5.2.1-2    The GNU core utilities
ii  fileutils                     5.2.1-2    The GNU file management utilities 
ii  initrd-tools                  0.1.81.1   tools to create initrd image for p
ii  modutils                      2.4.26-1.2 Linux module utilities

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi,

going through my old bugs, I'm closing some of them which are not relevant
anymore. Giving a last status:

- I'm now under etch with 2.6.15
- and if I remember well, I anyway solved the issue by disabling IRQ 7 for
the parallel port. The probleme seemed hence to be that either lp or irda
(or both) is not able to share properly the IRQ. But I didn't check if
it's still the case with 2.6.15.

Thanks for the help anyway,
Eric


-- 
Eric de France, d'Allemagne et de Navarre

--- End Message ---
Reply to: