Bug#338089: marked as done (New aic7xxx driver fails spectacularly on 2940UW)

To: maximilian attems <maks@sternwelten.at>
Subject: Bug#338089: marked as done (New aic7xxx driver fails spectacularly on 2940UW)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Mon, 05 Jun 2006 23:19:17 -0700
Message-id: <[🔎] handler.338089.D338089.114957436030029.ackdone@bugs.debian.org>
References: <20060606061232.GO28353@baikonur.stro.at> <20051108024523.35622.qmail@web88006.mail.re2.yahoo.com>

Your message dated Tue, 6 Jun 2006 08:12:32 +0200
with message-id <20060606061232.GO28353@baikonur.stro.at>
and subject line Bug#338089: Fixed?
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---

To: submit@bugs.debian.org
Subject: New aic7xxx driver fails spectacularly on 2940UW
From: Graham Knap <graham.knap@rogers.com>
Date: Mon, 7 Nov 2005 21:45:23 -0500 (EST)
Message-id: <20051108024523.35622.qmail@web88006.mail.re2.yahoo.com>

Package: linux-image-2.6.14-1-686
Version: 2.6.14-2

Recent versions of the aic7xxx driver will not boot on my secondary PC.
The 2.6.8 kernel shipped with sarge works perfectly, but neither the
2.6.12 kernel in testing nor the 2.6.14 kernel in unstable will boot.

This is an older system: 
Asus P2L-B, Celeron 500MHz, 384MB RAM, GeForce2 MX AGP
Adaptec 2940UW, IBM DDYS-T09170 (9GB disk)

I can't understand what exactly is failing, but I will attach a boot
log. (So null modem cables *are* still useful for something!)

I've tried adding "aic7xxx=dv:{0}" to the boot arguments but that
doesn't seem to make a difference. Also, "aic7xxx=verbose" doesn't seem
to do anything either.

I don't know if this makes a difference but my 2940UW reports its BIOS
revision as "1.34.3" during POST.

Any help would be much appreciated.

-- graham

Linux version 2.6.14-1-686 (Debian 2.6.14-2) (horms@debian.org) (gcc version 4.0.3 20051023 (prerelease) (Debian 4.0.2-3)) #1 Tue Nov 1 15:51:43 JST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017ffd000 (usable)
 BIOS-e820: 0000000017ffd000 - 0000000017fff000 (ACPI data)
 BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
DMI 2.0 present.
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro single console=tty0 console=ttyS1,38400n8
Local APIC disabled by BIOS -- you can enable it with "lapic"
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 501.254 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 385200k/393204k available (1803k kernel code, 7432k reserved, 512k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1002.82 BogoMIPS (lpj=501412)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0a00)
checking if image is initramfs... it is
softlockup thread 0 started up.
Freeing initrd memory: 1176k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf06d0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e400-e43f claimed by PIIX4 ACPI
PCI quirk: region e800-e81f claimed by PIIX4 SMB
PIIX4 devres B PIO at 0290-0297
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0xe400-0xe43f could not be reserved
pnp: 00:01: ioport range 0xe800-0xe80f has been reserved
pnp: 00:01: ioport range 0x294-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: d6000000-d7dfffff
  PREFETCH window: d7f00000-e3ffffff
Simple Boot Flag at 0x46 set to 0x1
audit: initializing netlink socket (disabled)
audit(1131398011.104:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
pnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative SB16 PnP'
isapnp: 1 Plug & Play card detected total
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 UAR1 UAR2 PS2M USB0 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
mice: PS/2 mouse device common for all mice
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

  Vendor: IBM       Model: DDYS-T09170N      Rev: S80D
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 8
 target0:0:0: Beginning Domain Validation
 target0:0:0: wide asynchronous.
 target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 8)
scsi0:0:0:0: Attempting to queue an ABORT message
CDB: 0x3b 0xa 0x0 0x0 0x0 0x0 0x0 0x2 0x39 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Data-out phase, at SEQADDR 0x84
Card was paused
ACCUM = 0x0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0xff
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x4]:(BSYI) ERROR[0x0] SCSIBUSL[0x8] LASTPHASE[0x0] 
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE) 
SCSIRATE[0x88]:(WIDEXFER) SEQCTL[0x10]:(FASTMODE) 
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE) 
SSTAT1[0x2]:(PHASECHG) SSTAT2[0x0] SSTAT3[0x0] 
SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
SXFRCTL0[0xa8]:(SPIOEN|FAST20|DFON) DFCNTRL[0x4]:(DIRECTION) 
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH) 
STACK: 0x0 0x151 0x192 0x60
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Sequencer SCB Info: 
  0 SCB_CONTROL[0x68]:(ULTRAENB|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x80]:(SCB_XFERLEN_ODD) SCB_TAG[0x3] 
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Pending list: 
  3 SCB_CONTROL[0x68]:(ULTRAENB|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x80]:(SCB_XFERLEN_ODD) 
Kernel Free SCB list: 1 0 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Device is active, asserting ATN
Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
scsi0:0:0:0: Attempting to queue a TARGET RESET message
CDB: 0x3b 0xa 0x0 0x0 0x0 0x0 0x0 0x2 0x39 0x0
aic7xxx_dev_reset returns 0x2003
Recovery SCB completes
scsi0:0:0:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State while idle, at SEQADDR 0x157
Card was paused
ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x14]:(BSYI|ATNI) ERROR[0x0] SCSIBUSL[0x8] 
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) 
SEQ_FLAGS[0x40]:(NO_CDB_SENT) SSTAT0[0x5]:(DMADONE|SDONE) 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] 
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) 
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH) 
STACK: 0x37 0x0 0x151 0x192
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Sequencer SCB Info: 
  0 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] SCB_TAG[0x2] 
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Pending list: 
  2 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] 
Kernel Free SCB list: 1 0 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Unable to deliver message
aic7xxx_abort returns 0x2003
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
scsi0 (0:0): rejecting I/O to offline device
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
scsi0:0:0:0: Attempting to queue an ABORT message
CDB: 0x3b 0xa 0x0 0x0 0x0 0x0 0x0 0x2 0x39 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State while idle, at SEQADDR 0x157
Card was paused
ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x14]:(BSYI|ATNI) ERROR[0x0] SCSIBUSL[0x8] 
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) 
SEQ_FLAGS[0x40]:(NO_CDB_SENT) SSTAT0[0x5]:(DMADONE|SDONE) 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] 
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) 
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH) 
STACK: 0x37 0x0 0x151 0x192
SCB count = 4
Kernel NEXTQSCB = 1
Card NEXTQSCB = 3
QINFIFO entries: 3 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Sequencer SCB Info: 
  0 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] SCB_TAG[0x2] 
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Pending list: 
  3 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x80]:(SCB_XFERLEN_ODD) 
  2 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] 
Kernel Free SCB list: 0 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:0:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State while idle, at SEQADDR 0x157
Card was paused
ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x14]:(BSYI|ATNI) ERROR[0x0] SCSIBUSL[0x8] 
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) 
SEQ_FLAGS[0x40]:(NO_CDB_SENT) SSTAT0[0x5]:(DMADONE|SDONE) 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] 
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) 
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH) 
STACK: 0x37 0x0 0x151 0x192
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 1
QINFIFO entries: 1 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Sequencer SCB Info: 
  0 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] SCB_TAG[0x2] 
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Pending list: 
  1 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] 
  2 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] 
Kernel Free SCB list: 0 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:0:0: Attempting to queue a TARGET RESET message
CDB: 0x3b 0xa 0x0 0x0 0x0 0x0 0x0 0x2 0x39 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State while idle, at SEQADDR 0x157
Card was paused
ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x14]:(BSYI|ATNI) ERROR[0x0] SCSIBUSL[0x8] 
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) 
SEQ_FLAGS[0x40]:(NO_CDB_SENT) SSTAT0[0x5]:(DMADONE|SDONE) 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] 
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) 
DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH) 
STACK: 0x37 0x0 0x151 0x192
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries: 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Sequencer SCB Info: 
  0 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] SCB_TAG[0x2] 
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Pending list: 
  2 SCB_CONTROL[0x70]:(MK_MESSAGE|TAG_ENB|DISCENB) SCB_SCSIID[0x7] 
SCB_LUN[0x0] 
Kernel Free SCB list: 1 0 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Unable to deliver message
aic7xxx_dev_reset returns 0x2003
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
 target0:0:0: Write Buffer failure 20000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation detected failure, dropping back
 target0:0:0: Write Buffer failure 10000
 target0:0:0: Domain Validation Failure, dropping back to Asynchronous
 target0:0:0: Ending Domain Validation
sda : READ CAPACITY failed.
sda : status=0, message=00, host=1, driver=00 
sda : sense not available. 
sda: asking for cache data failed
sda: assuming drive cache: write through
sda : READ CAPACITY failed.
sda : status=0, message=00, host=1, driver=00 
sda : sense not available. 
sda: asking for cache data failed
sda: assuming drive cache: write through
 sda:<6>sd 0:0:0:0: SCSI error: return code = 0x10000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: SCSI error: return code = 0x10000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
 unable to read partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Waiting 1 seconds for /sys/block/sda/sda2/dev to show up
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Waiting 2 seconds for /sys/block/sda/sda2/dev to show up
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Waiting 4 seconds for /sys/block/sda/sda2/dev to show up
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Waiting 8 seconds for /sys/block/sda/sda2/dev to show up
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Waiting 16 seconds for /sys/block/sda/sda2/dev to show up
/bin/cat: /sys/block/sda/sda2/dev: No such file or directory
Device /sys/block/sda/sda2/dev seems to be down.
Debugging opportunity, type ^D to continue.
/bin/dash: can't access tty; job control turned off
#

--- End Message ---

--- Begin Message ---

To: 338089-done@bugs.debian.org

Subject: Re: Bug#338089: Fixed?

From: maximilian attems <maks@sternwelten.at>

Date: Tue, 6 Jun 2006 08:12:32 +0200

Message-id: <20060606061232.GO28353@baikonur.stro.at>

In-reply-to: <[🔎] 6ce96e330606051934n29e013beka853cd2c79db04f9@mail.gmail.com>

References: <[🔎] 6ce96e330606051934n29e013beka853cd2c79db04f9@mail.gmail.com>
On Mon, Jun 05, 2006 at 10:34:33PM -0400, Graham wrote:
> Hi,
> 
> I have just noticed that the patch discussed above appears to be
> included in the Debian "linux-source-2.6.16" package.
> 
> So it would likely be quite easy to fix in etch, if that hasn't
> already been done.
> 
> -- graham

etch will soon get 2.6.16 indeed.

thanks for the notice, closing bug report.

-- 
maks
--- End Message ---

Reply to:

Prev by Date: Processed: Re: Bug#370616: linux-image-2.6.16-2-686: 'resume' boot flag does nothing
Next by Date: Re: Bug#369017 closed by Manoj Srivastava <srivasta@debian.org> (Bug#369017: fixed in kernel-package 10.048)
Previous by thread: Bug#370630: marked as done (linux-image-2.6.16-2-686: 'resume' boot flag does nothing)
Next by thread: Re: Bug#369017 closed by Manoj Srivastava <srivasta@debian.org> (Bug#369017: fixed in kernel-package 10.048)
Index(es):
- Date
- Thread