Bug#399537: linux-image-2.6.17-2-k7: USB: CDROM causes CF card nondetection
tags 399537 moreinfo
stop
On Mon, Nov 20, 2006 at 06:20:05PM +0800, Dan Jacobson wrote:
> Package: linux-image-2.6.17-2-k7
> Version: 2.6.17-6
> Severity: minor
again please stop testing against month old kernels.
use 2.6.18.
the linux images just install fine from sid in etch.
> At boot, I notice that if I have a CDROM writer (only tested when
> empty) plugged in to USB, my card reader's 128MB CF card is not
> detected, only the 16 MB built-in card is. I must unplug and replug
> the card reader to get the 128 MB card detected. Problem happens on
> -686 kernel too. Here are some dmesg excerpts.
>
> device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
> Vendor: PHILIPS Model: DVDR1648P1 Rev: P1.2
> Type: CD-ROM ANSI SCSI revision: 00
> usb-storage: device scan complete
> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg0 type 5
> Vendor: Generic Model: USB Storage-SMC Rev: 0180
> Type: Direct-Access ANSI SCSI revision: 00
> 0:0:0:0: Attached scsi generic sg1 type 0
> usb-storage: device scan complete
> SCSI device sda: 32001 512-byte hdwr sectors (16 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 00 00 00
> sda: assuming drive cache: write through
> SCSI device sda: 32001 512-byte hdwr sectors (16 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 00 00 00
> sda: assuming drive cache: write through
> sda: sda1
> sd 0:0:0:0: Attached scsi removable disk sda
>
> usb 1-1.1.1: USB disconnect, address 4
> usb 1-1.1.1: new full speed USB device using uhci_hcd and address 6
> usb 1-1.1.1: configuration #1 chosen from 1 choice
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 6
> usb-storage: waiting for device to settle before scanning
> Vendor: Generic Model: USB Storage-SMC Rev: 0180
> Type: Direct-Access ANSI SCSI revision: 00
> SCSI device sda: 32001 512-byte hdwr sectors (16 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 00 00 00
> sda: assuming drive cache: write through
> SCSI device sda: 32001 512-byte hdwr sectors (16 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 00 00 00
> sda: assuming drive cache: write through
> sda: sda1
> sd 2:0:0:0: Attached scsi removable disk sda
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> Vendor: Generic Model: USB Storage-CFC Rev: 0180
> Type: Direct-Access ANSI SCSI revision: 00
> SCSI device sdb: 250369 512-byte hdwr sectors (128 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 00 00 00
> sdb: assuming drive cache: write through
> SCSI device sdb: 250369 512-byte hdwr sectors (128 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 00 00 00
> sdb: assuming drive cache: write through
> sdb: sdb1
> sd 2:0:0:1: Attached scsi removable disk sdb
> sd 2:0:0:1: Attached scsi generic sg2 type 0
> Vendor: Generic Model: USB Storage-MMC Rev: 0180
> Type: Direct-Access ANSI SCSI revision: 00
> sd 2:0:0:2: Attached scsi removable disk sdc
> sd 2:0:0:2: Attached scsi generic sg3 type 0
> Vendor: Generic Model: USB Storage-MSC Rev: 0180
> Type: Direct-Access ANSI SCSI revision: 00
> sd 2:0:0:3: Attached scsi removable disk sdd
> sd 2:0:0:3: Attached scsi generic sg4 type 0
> usb-storage: device scan complete
>
> We also notice goofy repeating of messages. udev, hal is installed.
regards
--
maks
Reply to: