Bug#397217: linux-image-2.6-k7: shutdown final messages vs. USB
tags 397217 moreinfo
stop
On Mon, Nov 06, 2006 at 05:13:01AM +0800, Dan Jacobson wrote:
> Package: linux-image-2.6-k7
> Version: 2.6.17+2
> Severity: minor
etch will release with 2.6.18, use that.
you can get it from unstable and it will install in etch just fine.
please try to reproduce with 2.6.18.
> Please reassign to correct package.
> All I know is upon shutdown -h, the screen, just before the "Power down"
> message, is left with lots of
> 1-1.1:1.0 cannot disable/reset/enable port 1(error=-108)
> or something messages.
>
> If we, before shutdown -h, first umout our card reader and unplug it
> from the USB socket, we won't get the aforementioned messages on the
> lingering on the final power down screen, but see instead via dmesg
> various:
> sdc : sense not available.
> sdc : status=0, message=00, host=1, driver=00
> sdc : READ CAPACITY failed.
> Buffer I/O error on device sdd, logical block 0
> sdc: Mode Sense: 00 00 00 00
> sdd:<3> 0:0:0:3: rejecting I/O to dead device
> unable to read partition table
> sdc: Write Protect is off
> sdc: assuming drive cache: write through
>
> Anyway, it is not every user who's monitor stays on after one's
> motherboard's power is off, so I might have seen messages others
> don't.
> -- System Information:
> Kernel: Linux 2.6.17-2-k7
>
--
maks
Reply to: