[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#322960: marked as done (linux-image-2.6.12-1-sparc64: won't boot on netra T1)

Your message dated Fri, 27 Oct 2006 10:55:37 -0400
with message-id <20061027145537.GA14912@scowler.net>
and subject line Bug#322960: linux-image-2.6.12-1-sparc64: won't boot on netra T1
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: linux-image-2.6.12-1-sparc64
Version: 2.6.12-2
Severity: normal

[...]
Freeing initrd memory: 3328k freed                                                  
NET: Registered protocol family 16                                                  
PCI: Probing for controllers.                                                       
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20          
SABRE: Shared PCI config space at 000001fe01000000                                  
SABRE: DVMA at c0000000 [20000000]                                                  
PCI-IRQ: Routing bus[ 3] slot[ e] map[1] to INO[02]                                 
PCI0(PBMA): Bus running at 33MHz                                                    
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]                                 
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[20]                                 
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[1a]                                 
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [watchdog] [display7seg] [beeper] [flashprom] [flashprom] [i2c -> (adc) (gpio) (gpio)] [i2c] [SUNW,lom]
power: Control reg at 000001fff1724000 ... not using powerd.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to mono PROM 80x34
rtc_init: no PC rtc found
[drm] Initialized drm 1.0.0 20040925
Console: ttyS0 (SU)
ttyS0 at MMIO 0x1fff13803f8 (irq = 7289152) is a 16550A
ttyS1 at MMIO 0x1fff13602f8 (irq = 7288896) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
rtc_sun_init: Registered Mostek RTC driver.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP established hash table entries: 65536 (order: 6, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3328KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
initrd-tools: 0.1.81.1
SCSI subsystem initialized
sym0: <875> rev 0x3 at pci 0000:01:02.0 irq 4,7e0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.0
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02
 target0:0:0: tagged command queuing enabled, command queue depth 16.
 target0:0:0: Beginning Domain Validation
 target0:0:0: asynchronous.
WIDTH IS 1
 target0:0:0: wide asynchronous.
 target0:0:0: Domain Validation skipping write tests
 target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
 target0:0:0: Ending Domain Validation
  Vendor: FUJITSU   Model: MAJ3182M SUN18G   Rev: 0804
  Type:   Direct-Access                      ANSI SCSI revision: 02
 target0:0:1: tagged command queuing enabled, command queue depth 16.
 target0:0:1: Beginning Domain Validation
 target0:0:1: asynchronous.
WIDTH IS 1
 target0:0:1: wide asynchronous.
 target0:0:1: Domain Validation skipping write tests
 target0:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
 target0:0:1: Ending Domain Validation
envctrl: initialized [gpio 0x72] [gpio 0x70] [adc 0x9e]
envctrl: kenvctrld starting...
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sda: drive cache: write through
 /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p8
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sdb: drive cache: write through
 /dev/scsi/host0/bus0/target1/lun0: p2 p3 p8
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
[just sits here forever]

--- End Message ---
--- Begin Message --- 
Version: 2.6.17-5

> In preparation of the upcoming etch release, would you please
> test if either 2.6.17-9 from testing or 2.6.18-3 from unstable
> fixes your problem with booting on a Netra T1?

Not in a timely fashion, I can't.

--- End Message ---
Reply to: