Bug#370818: linux-image-2.6.16: lspci fails to list second pci express graphics card
The problem is reproducible with the official
linux-image-2.6.16-2-amd64-generic as well.
Attached is the dmesg output.
-subu
--- maximilian attems <maks@sternwelten.at> wrote:
> tags 370818 moreinfo
> stop
>
> On Tue, Jun 06, 2006 at 02:51:06PM -0700, Subu
> Krishnamoorthy wrote:
> > Package: linux-image-2.6.16
> > Version: 2
> > Severity: important
> >
> > This dual AMD opteron system runs on a kernel
> built from the debian patched kernel 2.6.16 sources.
> Booting with pci=noacpi lists the second nVidia
> Quadro FX 3400 card (see lspci outputs below).
> > NOTE: This used to work perfectly with a kernel
> built from 2.6.12 debian patched sources.
>
> please test official linux-image-2.6.16
> we can't support unknown home brewed ;)
>
> so we need to know _if_ you can reproduce the acpi
> problem in latest
> images too!
>
> if yes post it's dmesg please.
>
> --
> maks
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Bootdata ok (command line is root=/dev/sda3 ro console=tty0 )
Linux version 2.6.16-2-amd64-generic (Debian 2.6.16-14) (waldi@debian.org) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #1 Mon May 22 13:40:58 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff9300 (usable)
BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
ACPI: RSDP (v002 HP ) @ 0x00000000000e8010
ACPI: XSDT (v001 HP CPQ0062 0x20050912 0x00000000) @ 0x000000007fff94fc
ACPI: FADT (v003 HP VIPER 0x00000001 0x00000000) @ 0x000000007fff96bc
ACPI: SSDT (v002 HP PROJECT 0x00000001 MSFT 0x0100000e) @ 0x000000007fffad61
ACPI: MADT (v001 HP VIPER 0x00000001 0x00000000) @ 0x000000007fff97c8
ACPI: MCFG (v001 HP VIPER 0x00000001 0x00000000) @ 0x000000007fff9866
ACPI: SRAT (v002 HP VIPER 0x00000001 0x00000000) @ 0x000000007fff93ec
ACPI: DSDT (v001 HP DSDT 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 1026184
DMA zone: 3159 pages, LIFO batch:0
DMA32 zone: 505905 pages, LIFO batch:31
Normal zone: 517120 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf2600000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xf2600000, GSI 24-27
ACPI: IOAPIC (id[0x0a] address[0xf2601000] gsi_base[28])
IOAPIC[2]: apic_id 10, version 17, address 0xf2601000, GSI 28-31
ACPI: IOAPIC (id[0x0b] address[0xf2000000] gsi_base[32])
IOAPIC[3]: apic_id 11, version 17, address 0xf2000000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Checking aperture...
CPU 0: aperture @ 4000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 1994.722 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 4027712k/6291456k available (1735k kernel code, 165800k reserved, 786k data, 156k init)
Calibrating delay using timer specific routine.. 3993.74 BogoMIPS (lpj=7987490)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Opteron(tm) Processor 246 stepping 0a
Using local APIC timer interrupts.
result 12467032
Detected 12.467 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4732k freed
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:0a:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPA._PRT]
ACPI: PCI Root Bridge [PCI1] (0001:40)
PCI: Multiple domains not supported
ACPI: PCI Root Bridge [PCI2] (0002:80)
PCI: Multiple domains not supported
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKW] (IRQs *48), disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs *49), disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs *50), disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs *51), disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: match found with the PnP device '00:0b' and the driver 'system'
pnp: 00:0b: ioport range 0x400-0x47f could not be reserved
pnp: 00:0b: ioport range 0x480-0x48f has been reserved
pnp: 00:0b: ioport range 0xf800-0xf87f could not be reserved
pnp: 00:0b: ioport range 0xf880-0xf8ff has been reserved
pnp: 00:0b: ioport range 0xf900-0xf97f has been reserved
pnp: 00:0b: ioport range 0xf980-0xf9ff has been reserved
pnp: 00:0b: ioport range 0xfa00-0xfa7f has been reserved
pnp: 00:0b: ioport range 0xfa80-0xfaff has been reserved
pnp: match found with the PnP device '00:0e' and the driver 'system'
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:0a:00.0
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: f3000000-f4ffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1149639973.700:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:05' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:07' and the driver 'serial'
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI0 HUB SLO2 SLO1 COM1 USB0 USB2 MAC0 GLMA SLO6 GLMB SLO4 SLO5 SLO3 PBTN
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 156k freed
input: AT Translated Set 2 keyboard as /class/input/input0
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
GSI 16 sharing vector 0xC1 and IRQ 16
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 23 (level, high) -> IRQ 193
PCI: Setting latency timer of device 0000:00:0a.0 to 64
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
eth0: forcedeth.c: subsystem: 0103c:1500 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 22
GSI 17 sharing vector 0xC9 and IRQ 17
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LSB2] -> GSI 22 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 201, io mem 0xfebf0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 21
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LSB0] -> GSI 21 (level, high) -> IRQ 209
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 209, io mem 0xf5000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSA0] -> GSI 20 (level, high) -> IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x28D0 ctl 0x28FA bmdma 0x28B0 irq 217
ata2: SATA max UDMA/133 cmd 0x28D8 ctl 0x28FE bmdma 0x28B8 irq 217
ata1: SATA link down (SStatus 0)
scsi0 : sata_nv
usb 2-4: new low speed USB device using ohci_hcd and address 2
ata2: SATA link down (SStatus 0)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA1] -> GSI 23 (level, high) -> IRQ 193
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x28E0 ctl 0x2C02 bmdma 0x28C0 irq 193
ata4: SATA max UDMA/133 cmd 0x28E8 ctl 0x2C06 bmdma 0x28C8 irq 193
usb 2-4: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ata3: SATA link down (SStatus 0)
scsi2 : sata_nv
ata4: SATA link up 1.5 Gbps (SStatus 113)
ata4: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:407f
ata4: dev 0 ATA-6, max UDMA/133, 145226112 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
Vendor: ATA Model: WDC WD740GD-50FL Rev: 27.0
Type: Direct-Access ANSI SCSI revision: 05
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0x28a0-0x28a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x28a8-0x28af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 3:0:0:0: Attached scsi disk sda
hda: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input2
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2800
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2840
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 22 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 54788 usecs
intel8x0: clocking to 46961
Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k
EXT3 FS on sda3, internal journal
Probing IDE interface ide1...
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
eth0: no IPv6 routers present
nvidia: disagrees about version of symbol struct_module
nvidia: disagrees about version of symbol struct_module
Reply to: