Bug#333831: Combination of irqpoll and routeirq doesn't fix reboots entirely
David Schmitt wrote:
>
> Could you please retest this with a current linux image?
>
> 2.6.15 will enter unstable tomorrow.
>
> If this still isn't fixed, it'd be worthwhile to poke upstream
> (http://bugzilla.kernel.org/) and point them to the logs here.
Okay at 2.6.15 Debian kernel binary 2.6.15-1.686 I get similar behaviour.
I need "irqpoll" to avoid the load of ide-cd waiting for a "SysRq".
"irqpoll" everything works for a bit and them the machine spontaneously
reboots to BIOS screen whilst the CD is playing.
Will notify upstream. Thanks.
Script started on Sun 22 Jan 2006 23:32:52 GMT
ace:~# cat /proc/version
Linux version 2.6.15-1-686 (Debian 2.6.15-3) (horms@verge.net.au) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 Wed Jan 18 15:04:35 UTC 2006
ace:~#
ace:~# date
Sun Jan 22 23:33:04 GMT 2006
ace:~#
ace:~# lsmod
Module Size Used by
ipv6 221664 6
orinoco_cs 16968 1
orinoco 35060 1 orinoco_cs
hermes 7136 2 orinoco_cs,orinoco
pcmcia 35708 5 orinoco_cs
firmware_class 9696 1 pcmcia
parport_pc 32036 0
parport 31624 1 parport_pc
floppy 54628 0
pcspkr 1668 0
ohci_hcd 17764 0
yenta_socket 24972 6
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37872 3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_ali15x3 7076 0
i2c_ali1535 6692 0
i2c_core 19280 2 i2c_ali15x3,i2c_ali1535
snd_ali5451 21580 2
snd_ac97_codec 82464 1 snd_ali5451
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm_oss 45536 1
snd_mixer_oss 16448 1 snd_pcm_oss
snd_pcm 77576 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
snd_timer 21316 1 snd_pcm
snd 48420 8 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8928 2 snd
snd_page_alloc 9928 1 snd_pcm
shpchp 39712 0
pci_hotplug 24756 1 shpchp
ali_agp 6336 1
agpgart 31400 1 ali_agp
tsdev 7104 0
joydev 8864 0
usbmouse 5056 0
usbcore 113284 3 ohci_hcd,usbmouse
psmouse 32356 0
ide_generic 1120 0 [permanent]
ide_cd 36644 0
cdrom 33280 1 ide_cd
rtc 11316 0
ext3 117768 1
jbd 48404 1 ext3
mbcache 8484 1 ext3
ide_disk 15712 3
alim15x3 10732 0 [permanent]
generic 4260 0 [permanent]
ide_core 112800 5 ide_generic,ide_cd,ide_disk,alim15x3,generic
evdev 8800 0
mousedev 10496 1
ace:~#
ace:~# lspci
0000:00:00.0 Host bridge: ALi Corporation M1621 (rev 05)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (rev 01)
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
0000:00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
0000:00:14.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
ace:~#
ace:~# ps
bash: p: command not found
ace:~# lspci -n
0000:00:00.0 0600: 10b9:1621 (rev 05)
0000:00:01.0 0604: 10b9:5247 (rev 01)
0000:00:06.0 0401: 10b9:5451 (rev 01)
0000:00:07.0 0601: 10b9:1533
0000:00:10.0 0101: 10b9:5229 (rev c3)
0000:00:11.0 0680: 10b9:7101
0000:00:13.0 0607: 1217:6933 (rev 01)
0000:00:13.1 0607: 1217:6933 (rev 01)
0000:00:14.0 0c03: 10b9:5237 (rev 03)
0000:01:00.0 0300: 1002:4c4d (rev 64)
ace:~# dmesg
Linux version 2.6.15-1-686 (Debian 2.6.15-3) (horms@verge.net.au) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 Wed Jan 18 15:04:35 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 61424 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 Acer ) @ 0x000fe030
ACPI: RSDT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff0000
ACPI: FADT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff0054
ACPI: BOOT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff002c
ACPI: DSDT (v001 Acer FALCON25 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf108
Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro irqpoll
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01201000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 547.488 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255540k/262080k available (1425k kernel code, 5876k reserved, 531k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1096.26 BogoMIPS (lpj=548132)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Celeron (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs... it is
Freeing initrd memory: 1032k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region f100-f13f claimed by ali7101 ACPI
PCI quirk: region f140-f15f claimed by ali7101 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 34)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:09: ioport range 0xf100-0xf13f could not be reserved
pnp: 00:09: ioport range 0xf140-0xf15f has been reserved
pnp: 00:09: ioport range 0x1060-0x106f has been reserved
pnp: 00:09: ioport range 0x40b-0x40b has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: 80100000-820fffff
PREFETCH window: disabled.
PCI: Bus 2, cardbus bridge: 0000:00:13.0
IO window: 00001400-000014ff
IO window: 00001800-000018ff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:13.1
IO window: 00001c00-00001cff
IO window: 00002000-000020ff
PREFETCH window: 24000000-25ffffff
MEM window: 26000000-27ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x6e set to 0x1
audit: initializing netlink socket (disabled)
audit(1137972630.471:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
COM0 OZ68 OZ69 OBAU USB0 LID
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 15
PCI: setting IRQ 15 as level-triggered
ALI15X3: chipset revision 195
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6050-0x6057, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x6058-0x605f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IBM-DJSA-205, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITA CR-176, ATAPI CD/DVD-ROM drive
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c012f989>] __report_bad_irq+0x31/0x73
[<c012fa58>] note_interrupt+0x75/0x99
[<c012f558>] __do_IRQ+0x65/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c0119a24>] __do_softirq+0x2c/0x7d
[<c0119a97>] do_softirq+0x22/0x26
[<c010498a>] do_IRQ+0x22/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c013007b>] sync_page_range+0x9e/0xd5
[<c012f74c>] setup_irq+0xa1/0xc2
[<d0842f4b>] ide_intr+0x0/0xed [ide_core]
[<c012f860>] request_irq+0x6e/0x8e
[<d084613b>] init_irq+0x1eb/0x337 [ide_core]
[<d0842f4b>] ide_intr+0x0/0xed [ide_core]
[<d084665a>] hwif_init+0xff/0x1d9 [ide_core]
[<d0845dbe>] probe_hwif_init_with_fixup+0x1f/0x79 [ide_core]
[<d0848628>] ide_setup_pci_device+0x70/0x7d [ide_core]
[<c01ac592>] __pci_device_probe+0x32/0x41
[<c01ac5c0>] pci_device_probe+0x1f/0x34
[<c01fce4f>] driver_probe_device+0x32/0x7c
[<c01fcef0>] __driver_attach+0x0/0x36
[<c01fcf14>] __driver_attach+0x24/0x36
[<c01fc750>] bus_for_each_dev+0x46/0x6c
[<c01fcf3a>] driver_attach+0x14/0x18
[<c01fcef0>] __driver_attach+0x0/0x36
[<c01fcacc>] bus_add_driver+0x54/0x96
[<c01ac792>] __pci_register_driver+0x75/0x88
[<d081c028>] ali15x3_ide_init+0xf/0x13 [alim15x3]
[<c0129f01>] sys_init_module+0xa5/0x164
[<c0102a75>] syscall_call+0x7/0xb
handlers:
[<d0842f4b>] (ide_intr+0x0/0xed [ide_core])
Disabling IRQ #15
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 9767520 sectors (5000 MB) w/384KiB Cache, CHS=10336/15/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 >
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 239044k swap on /dev/hda5. Priority:-1 extents:1 across:239044k
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected ALi M???? chipset
agpgart: AGP aperture is 64M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [PILH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [PILH] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:13.0 [1025:1010]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000410
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:13.1 [1025:1010]
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pccard: PCMCIA card inserted into slot 0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [PILI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [PILI] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:14.0: OHCI Host Controller
ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:14.0: irq 11, io mem 0x82400000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
pcmcia: registering new device pcmcia0.0
eth0: Hardware identity 0001:0001:0004:0000
eth0: Station identity 001f:0001:0008:000a
eth0: Firmware determined as Lucent/Agere 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:0D:27:84
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ace:~#
Script done on Sun 22 Jan 2006 23:33:37 GMT
Script started on Sun 22 Jan 2006 23:27:27 GMT
ace:~# date
Sun Jan 22 23:27:30 GMT 2006
ace:~# cat /proc/version
Linux version 2.6.15-1-686 (Debian 2.6.15-3) (horms@verge.net.au) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 Wed Jan 18 15:04:35 UTC 2006
ace:~# echo Booted without /e irqpool ll
Booted without irqpoll
ace:~#
ace:~# lsmod
Module Size Used by
ipv6 221664 6
orinoco_cs 16968 1
orinoco 35060 1 orinoco_cs
hermes 7136 2 orinoco_cs,orinoco
pcmcia 35708 5 orinoco_cs
firmware_class 9696 1 pcmcia
tsdev 7104 0
joydev 8864 0
psmouse 32356 0
parport_pc 32036 0
parport 31624 1 parport_pc
floppy 54628 0
pcspkr 1668 0
ohci_hcd 17764 0
usbcore 113284 2 ohci_hcd
yenta_socket 24972 6
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37872 3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_ali15x3 7076 0
i2c_ali1535 6692 0
i2c_core 19280 2 i2c_ali15x3,i2c_ali1535
snd_ali5451 21580 2
snd_ac97_codec 82464 1 snd_ali5451
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm_oss 45536 1
snd_mixer_oss 16448 1 snd_pcm_oss
snd_pcm 77576 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
snd_timer 21316 1 snd_pcm
snd 48420 8 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8928 2 snd
snd_page_alloc 9928 1 snd_pcm
shpchp 39712 0
pci_hotplug 24756 1 shpchp
ali_agp 6336 1
agpgart 31400 1 ali_agp
ide_cd 36656 1
cdrom 33280 1 ide_cd
rtc 11316 0
ext3 117768 1
jbd 48404 1 ext3
mbcache 8484 1 ext3
ide_disk 15712 3
alim15x3 10732 0 [permanent]
generic 4260 0 [permanent]
ide_core 112800 4 ide_cd,ide_disk,alim15x3,generic
evdev 8800 0
mousedev 10496 2
ace:~#
ace:~# lspci
0000:00:00.0 Host bridge: ALi Corporation M1621 (rev 05)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (rev 01)
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
0000:00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
0000:00:14.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
ace:~#
ace:~# lspci -0n n
0000:00:00.0 0600: 10b9:1621 (rev 05)
0000:00:01.0 0604: 10b9:5247 (rev 01)
0000:00:06.0 0401: 10b9:5451 (rev 01)
0000:00:07.0 0601: 10b9:1533
0000:00:10.0 0101: 10b9:5229 (rev c3)
0000:00:11.0 0680: 10b9:7101
0000:00:13.0 0607: 1217:6933 (rev 01)
0000:00:13.1 0607: 1217:6933 (rev 01)
0000:00:14.0 0c03: 10b9:5237 (rev 03)
0000:01:00.0 0300: 1002:4c4d (rev 64)
ace:~#
ace:~# dmesg
5MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 61424 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 Acer ) @ 0x000fe030
ACPI: RSDT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff0000
ACPI: FADT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff0054
ACPI: BOOT (v001 Acer FALCON25 0x00000001 Acer 0x00000000) @ 0x0fff002c
ACPI: DSDT (v001 Acer FALCON25 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf108
Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01201000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 547.491 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255540k/262080k available (1425k kernel code, 5876k reserved, 531k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1095.01 BogoMIPS (lpj=547508)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Celeron (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs... it is
Freeing initrd memory: 1032k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region f100-f13f claimed by ali7101 ACPI
PCI quirk: region f140-f15f claimed by ali7101 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 34)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:09: ioport range 0xf100-0xf13f could not be reserved
pnp: 00:09: ioport range 0xf140-0xf15f has been reserved
pnp: 00:09: ioport range 0x1060-0x106f has been reserved
pnp: 00:09: ioport range 0x40b-0x40b has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: 80100000-820fffff
PREFETCH window: disabled.
PCI: Bus 2, cardbus bridge: 0000:00:13.0
IO window: 00001400-000014ff
IO window: 00001800-000018ff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:13.1
IO window: 00001c00-00001cff
IO window: 00002000-000020ff
PREFETCH window: 24000000-25ffffff
MEM window: 26000000-27ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x6e set to 0x1
audit: initializing netlink socket (disabled)
audit(1137972211.178:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
COM0 OZ68 OZ69 OBAU USB0 LID
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 15
PCI: setting IRQ 15 as level-triggered
ALI15X3: chipset revision 195
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6050-0x6057, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x6058-0x605f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IBM-DJSA-205, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITA CR-176, ATAPI CD/DVD-ROM drive
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c012f989>] __report_bad_irq+0x31/0x73
[<c012fa58>] note_interrupt+0x75/0x99
[<c012f558>] __do_IRQ+0x65/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c0119a24>] __do_softirq+0x2c/0x7d
[<c0119a97>] do_softirq+0x22/0x26
[<c010498a>] do_IRQ+0x22/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c013007b>] sync_page_range+0x9e/0xd5
[<c012f74c>] setup_irq+0xa1/0xc2
[<d0842f4b>] ide_intr+0x0/0xed [ide_core]
[<c012f860>] request_irq+0x6e/0x8e
[<d084613b>] init_irq+0x1eb/0x337 [ide_core]
[<d0842f4b>] ide_intr+0x0/0xed [ide_core]
[<d084665a>] hwif_init+0xff/0x1d9 [ide_core]
[<d0845dbe>] probe_hwif_init_with_fixup+0x1f/0x79 [ide_core]
[<d0848628>] ide_setup_pci_device+0x70/0x7d [ide_core]
[<c01ac592>] __pci_device_probe+0x32/0x41
[<c01ac5c0>] pci_device_probe+0x1f/0x34
[<c01fce4f>] driver_probe_device+0x32/0x7c
[<c01fcef0>] __driver_attach+0x0/0x36
[<c01fcf14>] __driver_attach+0x24/0x36
[<c01fc750>] bus_for_each_dev+0x46/0x6c
[<c01fcf3a>] driver_attach+0x14/0x18
[<c01fcef0>] __driver_attach+0x0/0x36
[<c01fcacc>] bus_add_driver+0x54/0x96
[<c01ac792>] __pci_register_driver+0x75/0x88
[<d081c028>] ali15x3_ide_init+0xf/0x13 [alim15x3]
[<c0129f01>] sys_init_module+0xa5/0x164
[<c0102a75>] syscall_call+0x7/0xb
handlers:
[<d0842f4b>] (ide_intr+0x0/0xed [ide_core])
Disabling IRQ #15
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 9767520 sectors (5000 MB) w/384KiB Cache, CHS=10336/15/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 >
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 548388
ext3_orphan_cleanup: deleting unreferenced inode 548382
EXT3-fs: hda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 239044k swap on /dev/hda5. Priority:-1 extents:1 across:239044k
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c012f989>] __report_bad_irq+0x31/0x73
[<c012fa58>] note_interrupt+0x75/0x99
[<c012f558>] __do_IRQ+0x65/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c012007b>] sys_setreuid+0xfc/0x16d
[<d0842eb6>] ide_timer_expiry+0x172/0x17a [ide_core]
[<d0842d44>] ide_timer_expiry+0x0/0x17a [ide_core]
[<c011caa7>] run_timer_softirq+0x10d/0x14f
[<c0119a2c>] __do_softirq+0x34/0x7d
[<c0119a97>] do_softirq+0x22/0x26
[<c010498a>] do_IRQ+0x22/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c0101047>] default_idle+0x2b/0x53
[<c01010ae>] cpu_idle+0x3f/0x57
[<c02ec690>] start_kernel+0x17b/0x17f
handlers:
[<d0842f4b>] (ide_intr+0x0/0xed [ide_core])
Disabling IRQ #15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected ALi M???? chipset
agpgart: AGP aperture is 64M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [PILH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [PILH] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:13.0 [1025:1010]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000410
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:13.1 [1025:1010]
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pccard: PCMCIA card inserted into slot 0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [PILI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [PILI] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:14.0: OHCI Host Controller
ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:14.0: irq 11, io mem 0x82400000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ts: Compaq touchscreen protocol output
hdc: lost interrupt
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c012f989>] __report_bad_irq+0x31/0x73
[<c012fa58>] note_interrupt+0x75/0x99
[<c012f558>] __do_IRQ+0x65/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c012f4bc>] handle_IRQ_event+0x15/0x4c
[<c012f546>] __do_IRQ+0x53/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c012007b>] sys_setreuid+0xfc/0x16d
[<d0842eb6>] ide_timer_expiry+0x172/0x17a [ide_core]
[<d0842d44>] ide_timer_expiry+0x0/0x17a [ide_core]
[<c011caa7>] run_timer_softirq+0x10d/0x14f
[<c0119a2c>] __do_softirq+0x34/0x7d
[<c0119a97>] do_softirq+0x22/0x26
[<c010498a>] do_IRQ+0x22/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c0101047>] default_idle+0x2b/0x53
[<c01010ae>] cpu_idle+0x3f/0x57
[<c02ec690>] start_kernel+0x17b/0x17f
handlers:
[<d0842f4b>] (ide_intr+0x0/0xed [ide_core])
Disabling IRQ #15
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
pcmcia: registering new device pcmcia0.0
eth0: Hardware identity 0001:0001:0004:0000
eth0: Station identity 001f:0001:0008:000a
eth0: Firmware determined as Lucent/Agere 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:0D:27:84
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ide-cd: cmd 0x25 timed out
hdc: lost interrupt
ide-cd: cmd 0x25 timed out
hdc: lost interrupt
irq 15: nobody cared (try booting with the "irqpoll" option)
[<c012f989>] __report_bad_irq+0x31/0x73
[<c012fa58>] note_interrupt+0x75/0x99
[<c012f558>] __do_IRQ+0x65/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c012f4bc>] handle_IRQ_event+0x15/0x4c
[<c012f546>] __do_IRQ+0x53/0x91
[<c0104985>] do_IRQ+0x1d/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c012007b>] sys_setreuid+0xfc/0x16d
[<d0842eb6>] ide_timer_expiry+0x172/0x17a [ide_core]
[<d0842d44>] ide_timer_expiry+0x0/0x17a [ide_core]
[<c011caa7>] run_timer_softirq+0x10d/0x14f
[<c0119a2c>] __do_softirq+0x34/0x7d
[<c0119a97>] do_softirq+0x22/0x26
[<c010498a>] do_IRQ+0x22/0x28
[<c01034ba>] common_interrupt+0x1a/0x20
[<c0101047>] default_idle+0x2b/0x53
[<c01010ae>] cpu_idle+0x3f/0x57
[<c02ec690>] start_kernel+0x17b/0x17f
handlers:
[<d0842f4b>] (ide_intr+0x0/0xed [ide_core])
Disabling IRQ #15
ace:~#
ace:~# exit
Script done on Sun 22 Jan 2006 23:28:22 GMT
Reply to: