Bug#293905: kernel-image-2.6.10-1-686-smp: kernel oops under normal usage

[Sean O'Dubhghaill <sean@doyle55.freeserve.co.uk>]

Package: kernel-image-2.6.10-1-686-smp
Severity: important


under normal usage running x & kde etc. the kernel oopsed causing X to restart into gdm. Logging into the system 
again, during kde's startup a message poped up saying kde couldn't start kdeinit and when kde had finished loading 
application such as konsole and konqueror would not start. Attached is the kernel oops message, a dmesg, and lspci 
from the system just after it oopsed.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)

Unable to handle kernel paging request at virtual address 202f67c3
 printing eip:
dc434000
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
Modules linked in: radeon nfsd exportfs lockd sunrpc lp ipv6 af_packet sis900 sn
d_via82xx snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_al
loc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore joydev mou
sedev tsdev usbhid uhci_hcd usbcore shpchp pci_hotplug via_agp agpgart pcspkr rt
c parport_pc parport floppy evdev ext2 mbcache capability commoncap i2c_viapro v
ia686a i2c_sensor i2c_core ide_cd cdrom ide_floppy reiserfs ide_generic siimage
aec62xx trm290 alim15x3 hpt34x hpt366 ide_disk cmd64x piix rz1000 slc90e66 gener
ic cs5530 cs5520 sc1200 triflex atiixp pdc202xx_old pdc202xx_new opti621 ns87415
 cy82c693 amd74xx sis5513 via82cxxx serverworks ide_core unix fbcon font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU:    1
EIP:    0060:[<dc434000>]    Not tainted VLI
EFLAGS: 00013282   (2.6.10-1-686-smp)
EIP is at 0xdc434000
eax: c02e89c4   ebx: dc433fac   ecx: 000ec280   edx: 00000808
esi: 0288126d   edi: 0288126d   ebp: c01079a0   esp: dc433f90
ds: 007b   es: 007b   ss: 0068
Process XFree86 (pid: 5902, threadinfo=dc432000 task=df2d2020)
Stack: bffff5f8 00000000 dc432000 c01214b7 dc433fac 00001d58 dc433fac dc435072
       000ec280 bffff5f8 00000000 00000000 c010318f bffff5f8 00000000 00000000
       00000000 00000000 bffff608 0000004e 0000007b 0000007b 0000004e 410acfe1
Call Trace:
 [<c01214b7>] sys_gettimeofday+0x27/0x90
 [<c010318f>] syscall_call+0x7/0xb
Code: 00 00 00 08 f6 ff bf 4e 00 00 00 7b 00 00 00 7b 00 00 00 4e 00 00 00 e1 cf 0a 41 73 00 00 00 46 32 00 00 ec f5 ff bf 7b 00 00 00 <00> 80 ff dd 00 60 d3 ce 80 00 00 00 80 40 43 dc 29 00 00 00 ff

Linux version 2.6.10-1-686-smp (dilinger@toaster.hq.voxel.net) (gcc version 3.3.
5 (Debian 1:3.3.5-6)) #1 SMP Tue Jan 18 03:03:11 EST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fbe00
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa950
ACPI: RSDT (v001 AMIINT AMIINI09 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001    VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 996.883 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 510904k/524224k available (1700k kernel code, 12656k reserved, 711k data
, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1974.27 BogoMIPS (lpj=987136)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000
00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 0
0000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 0000000
0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.68 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 1990.65 BogoMIPS (lpj=995328)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000
00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 0
0000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 0000000
0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3964.92 BogoMIPS).
ENABLING IO-APIC IRQs
...TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0:
 domain 0: span 01
  groups: 01
  domain 1: span 03
   groups: 01 02
CPU1:
 domain 0: span 02
  groups: 02
  domain 1: span 03
   groups: 02 01
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a
n initrd
Freeing initrd memory: 4612k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Enabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI0 UAR1  USB USB1  AC9  MC9
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4612KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SP1614N, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Probing IDE interface ide1...
hdc: SONY CD-RW CRX300E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
Adding 979956k swap on /dev/hda2.  Priority:-1 extents:1
ide-floppy driver 0.99.newide
hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
inserting floppy driver for 2.6.10-1-686-smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EC
P]
parport_pc: VIA parallel port: io=0x378, irq=7
Real Time Clock Driver v1.12
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0xe000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(T
M)] on usb-0000:00:07.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:07.5 to 64
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 169
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 169, 00:06:4f:03:fe:0f.
NET: Registered protocol family 17
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
Disabled Privacy Extensions on device c032fda0(lo)
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon
 R200 QH [Radeon 8500]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode
Unable to handle kernel paging request at virtual address 202f67c3
 printing eip:
dc434000
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
Modules linked in: radeon nfsd exportfs lockd sunrpc lp ipv6 af_packet sis900 sn
d_via82xx snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_al
loc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore joydev mou
sedev tsdev usbhid uhci_hcd usbcore shpchp pci_hotplug via_agp agpgart pcspkr rt
c parport_pc parport floppy evdev ext2 mbcache capability commoncap i2c_viapro v
ia686a i2c_sensor i2c_core ide_cd cdrom ide_floppy reiserfs ide_generic siimage
aec62xx trm290 alim15x3 hpt34x hpt366 ide_disk cmd64x piix rz1000 slc90e66 gener
ic cs5530 cs5520 sc1200 triflex atiixp pdc202xx_old pdc202xx_new opti621 ns87415
 cy82c693 amd74xx sis5513 via82cxxx serverworks ide_core unix fbcon font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU:    1
EIP:    0060:[<dc434000>]    Not tainted VLI
EFLAGS: 00013282   (2.6.10-1-686-smp)
EIP is at 0xdc434000
eax: c02e89c4   ebx: dc433fac   ecx: 000ec280   edx: 00000808
esi: 0288126d   edi: 0288126d   ebp: c01079a0   esp: dc433f90
ds: 007b   es: 007b   ss: 0068
Process XFree86 (pid: 5902, threadinfo=dc432000 task=df2d2020)
Stack: bffff5f8 00000000 dc432000 c01214b7 dc433fac 00001d58 dc433fac dc435072
       000ec280 bffff5f8 00000000 00000000 c010318f bffff5f8 00000000 00000000
       00000000 00000000 bffff608 0000004e 0000007b 0000007b 0000004e 410acfe1
Call Trace:
 [<c01214b7>] sys_gettimeofday+0x27/0x90
 [<c010318f>] syscall_call+0x7/0xb
Code: 00 00 00 08 f6 ff bf 4e 00 00 00 7b 00 00 00 7b 00 00 00 4e 00 00 00 e1 cf 0a 41 73 00 00 00 46 32 00 00 ec f5 ff bf 7b 00 00 00 <00> 80 ff dd 00 60 d3 ce 80 00 00 00 80 40 43 dc 29 00 00 00 ff
 <6>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
0000:00:0b.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QH [Radeon 8500] (rev 80)