[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#312255: Problems booting kernel-image-2.6.8-2-k7



On Fri, Sep 09, 2005 at 10:34:08PM +0200, Alessandro Di Rubbo wrote:
> Package: kernel-image-2.6.8-2-k7
> Version: 2.6.8-16
> Followup-For: Bug #312255
> 
> 
> If I boot the system using kernel 2.6, after the message "Starting GNOME 
> DISPLAY MANAGER: gdm", a messy image appears, similar to my desktop 
> background: except for the mouse, everything is blocked. To go on I have 
> to reset: mysteriously, after the reboot I can use kernel 2.6 (sometimes 
> I have to repeat this procedure many times).
> Kernel 2.4, instead, works fine.
> 
> I installed the kernel-image-2.6.8-2-k7 package after the installation 
> of Debian 3.1 "sarge" with kernel-image-2.4.27-2-386.
> 
> I use an AMD Athlon XP 1800+ CPU and an ATI Radeon 7000 graphic card on 
> an ASUS A7V880 motherboard (VIA KT880/VT8237 chipset).

Hi, I wonder if this might be a bug in X, though
it could be just as easily a problem with the kernel.
I've CCed the X maintainers, they may have some insight.

> --------
> 
> "lspci -v" output:
> 
> 
> 0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0269 
> (rev 80)
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, 66MHz, medium devsel, latency 64
>         Memory at e0000000 (32-bit, prefetchable) [size=256M]
>         Capabilities: [80] AGP version 3.5
>         Capabilities: [50] Power Management version 2
> 
> 0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1269
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, medium devsel, latency 0
> 
> 0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2269
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, medium devsel, latency 0
> 
> 0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3269
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, medium devsel, latency 0
> 
> 0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4269
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, medium devsel, latency 0
> 
> 0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7269
>         Subsystem: Asustek Computer, Inc.: Unknown device 8122
>         Flags: bus master, medium devsel, latency 0
> 
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 
> (prog-if 00 [Normal decode])
>         Flags: bus master, 66MHz, medium devsel, latency 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         I/O behind bridge: 0000d000-0000dfff
>         Memory behind bridge: fe100000-fe4fffff
>         Prefetchable memory behind bridge: 9ff00000-afefffff
>         Capabilities: [70] Power Management version 2
> 
> 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA 
> RAID Controller (rev 80)
>         Subsystem: Asustek Computer, Inc. A7V600 motherboard
>         Flags: bus master, medium devsel, latency 64, IRQ 20
>         I/O ports at eff0 [size=8]
>         I/O ports at efe4 [size=4]
>         I/O ports at efa8 [size=8]
>         I/O ports at efe0 [size=4]
>         I/O ports at ef90 [size=16]
>         I/O ports at e800 [size=256]
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:0f.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 
> (prog-if 8a [Master SecP PriP])
>         Subsystem: Asustek Computer, Inc. A7V600 motherboard
>         Flags: bus master, medium devsel, latency 32, IRQ 20
>         I/O ports at fc00 [size=16]
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller
>         Flags: bus master, medium devsel, latency 64, IRQ 21
>         I/O ports at eec0 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller
>         Flags: bus master, medium devsel, latency 64, IRQ 21
>         I/O ports at ef00 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller
>         Flags: bus master, medium devsel, latency 64, IRQ 21
>         I/O ports at ef20 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller
>         Flags: bus master, medium devsel, latency 64, IRQ 21
>         I/O ports at ef40 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 
> (prog-if 20 [EHCI])
>         Subsystem: VIA Technologies, Inc. USB 2.0
>         Flags: bus master, medium devsel, latency 64, IRQ 21
>         Memory at fe900000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge 
> [K8T800 South]        Subsystem: Asustek Computer, Inc. A7V600 
> motherboard
>         Flags: bus master, medium devsel, latency 0
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
> VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
>         Subsystem: Asustek Computer, Inc.: Unknown device 810d
>         Flags: medium devsel, IRQ 22
>         I/O ports at e000 [size=256]
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL-8139/8139C/8139C+ (rev 10)
>         Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>         Flags: bus master, medium devsel, latency 64, IRQ 18
>         I/O ports at e400 [size=256]
>         Memory at feb00000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [50] Power Management version 2
> 
> 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon 
> RV200 QW [Radeon 7500] (prog-if 00 [VGA])
>         Subsystem: PC Partner Limited Radeon RV200 QW [Radeon 7500 LE]
>         Flags: bus master, stepping, 66MHz, medium devsel, latency 64, 
> IRQ 16
>         Memory at a0000000 (32-bit, prefetchable) [size=128M]
>         I/O ports at d000 [size=256]
>         Memory at fe400000 (32-bit, non-prefetchable) [size=64K]
>         Expansion ROM at fe300000 [disabled] [size=128K]
>         Capabilities: [58] AGP version 2.0
>         Capabilities: [50] Power Management version 2
> 
> --------
> 
> 
> "dmesg" output using kernel 2.4:
> 
> 
> Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc 
> version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
>  BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
>  BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
>  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> 511MB LOWMEM available.
> found SMP MP-table at 000ff780
> hm, page 000ff000 reserved twice.
> hm, page 00100000 reserved twice.
> hm, page 000f0000 reserved twice.
> hm, page 000f1000 reserved twice.
> On node 0 totalpages: 130880
> zone(0): 4096 pages.
> zone(1): 126784 pages.
> zone(2): 0 pages.
> ACPI: RSDP (v000 ACPIAM                                    ) @ 
> 0x000f91a0
> ACPI: RSDT (v001 A M I  OEMRSDT  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40000
> ACPI: FADT (v002 A M I  OEMFACP  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40200
> ACPI: MADT (v001 A M I  OEMAPIC  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40300
> ACPI: OEMB (v001 A M I  OEMBIOS  0x09000424 MSFT 0x00000097) @ 
> 0x1ff50040
> ACPI: DSDT (v001  A0008 A0008705 0x00000705 INTL 0x02002026) @ 
> 0x00000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 Pentium(tm) Pro APIC version 16
> Using ACPI for processor (LAPIC) configuration information
> Intel MultiProcessor Specification v1.1
>     Virtual Wire compatibility mode.
> OEM ID: ASUSTek  Product ID: A7V880       APIC at: 0xFEE00000
> I/O APIC #1 Version 3 at 0xFEC00000.
> Enabling APIC mode: Flat.	Using 1 I/O APICs
> Processors: 1
> Kernel command line: root=/dev/hda1 ro 
> Initializing CPU#0
> Detected 1533.449 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 3060.53 BogoMIPS
> Memory: 511876k/523520k available (1069k kernel code, 11256k reserved, 
> 459k data, 96k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
> CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
> CPU: AMD Athlon(tm) XP  1800+ stepping 02
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000080
> ESR value after enabling vector: 00000000
> ENABLING IO-APIC IRQs
> Setting 1 in the phys_id_present_map
> ....changing IO-APIC physical APIC ID to 1 ... ok.
> init IO_APIC IRQs
>  IO-APIC (apicid-pin) 1-0, 1-17, 1-19, 1-23 not connected.
> ...TIMER: vector=0x31 pin1=2 pin2=0
> number of MP IRQ sources: 25.
> number of IO-APIC #1 registers: 24.
> testing the IO APIC.......................
> 
> IO APIC #1......
> ..... register #00: 01000000
> ........    : physical APIC id: 01
> ........    : Delivery Type: 0
> ........    : LTS          : 0
> ..... register #01: 00178003
> ........     : max redirection entries: 0017
> ........     : PRQ implemented: 1
> ........     : IO APIC version: 0003
> ..... IRQ redirection table:
>  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
>  00 000 00  1    0    0   0   0    0    0    00
>  01 001 01  0    0    0   0   0    1    1    39
>  02 001 01  0    0    0   0   0    1    1    31
>  03 001 01  0    0    0   0   0    1    1    41
>  04 001 01  0    0    0   0   0    1    1    49
>  05 001 01  0    0    0   0   0    1    1    51
>  06 001 01  0    0    0   0   0    1    1    59
>  07 001 01  0    0    0   0   0    1    1    61
>  08 001 01  0    0    0   0   0    1    1    69
>  09 001 01  0    0    0   0   0    1    1    71
>  0a 001 01  0    0    0   0   0    1    1    79
>  0b 001 01  0    0    0   0   0    1    1    81
>  0c 001 01  0    0    0   0   0    1    1    89
>  0d 001 01  0    0    0   0   0    1    1    91
>  0e 001 01  0    0    0   0   0    1    1    99
>  0f 001 01  0    0    0   0   0    1    1    A1
>  10 001 01  1    1    0   1   0    1    1    A9
>  11 000 00  1    0    0   0   0    0    0    00
>  12 001 01  1    1    0   1   0    1    1    B1
>  13 000 00  1    0    0   0   0    0    0    00
>  14 001 01  1    1    0   1   0    1    1    B9
>  15 001 01  1    1    0   1   0    1    1    C1
>  16 001 01  1    1    0   1   0    1    1    C9
>  17 000 00  1    0    0   0   0    0    0    00
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ11 -> 0:11
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ16 -> 0:16
> IRQ18 -> 0:18
> IRQ20 -> 0:20
> IRQ21 -> 0:21
> IRQ22 -> 0:22
> ..................................... done.
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ...... CPU clock speed is 1533.4062 MHz.
> ...... host bus clock speed is 266.6793 MHz.
> cpu: 0, clocks: 2666793, slice: 1333396
> CPU0<T0:2666784,T1:1333376,D:12,S:1333396,C:2666793>
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter disabled.
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: ACPI tables contain no PCI IRQ routing entries
> PCI: Probing PCI hardware (bus 00)
> PCI: Using IRQ router default [1106/3227] at 00:11.0
> PCI->APIC IRQ transform: (B0,I15,P1) -> 20
> PCI->APIC IRQ transform: (B0,I15,P0) -> 20
> PCI->APIC IRQ transform: (B0,I16,P0) -> 21
> PCI->APIC IRQ transform: (B0,I16,P0) -> 21
> PCI->APIC IRQ transform: (B0,I16,P1) -> 21
> PCI->APIC IRQ transform: (B0,I16,P1) -> 21
> PCI->APIC IRQ transform: (B0,I16,P2) -> 21
> PCI->APIC IRQ transform: (B0,I17,P2) -> 22
> PCI->APIC IRQ transform: (B0,I19,P0) -> 18
> PCI->APIC IRQ transform: (B1,I0,P0) -> 16
> PCI: Via IRQ fixup for 00:10.3, from 3 to 5
> PCI: Via IRQ fixup for 00:10.2, from 3 to 5
> PCI: Via IRQ fixup for 00:10.1, from 11 to 5
> PCI: Via IRQ fixup for 00:10.0, from 11 to 5
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
> SHARE_IRQ SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> Initializing Cryptographic API
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> Linux IP multicast router 0.06 plus PIM-SM
> RAMDISK: cramfs filesystem found at block 0
> RAMDISK: Loading 3692 blocks [1 disk] into ram disk... done.
> Freeing initrd memory: 3692k freed
> VFS: Mounted root (cramfs filesystem).
> Freeing unused kernel memory: 96k freed
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with 
> idebus=xx
> ide: late registration of driver.
> VP_IDE: IDE controller at PCI slot 00:0f.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with 
> idebus=xx
> VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.1
>     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
> hda: Maxtor 6E040L0, ATA DISK drive
> blk: queue e0825b60, I/O limit 4095Mb (mask 0xffffffff)
> hdc: LITEON DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
> hdd: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: attached ide-disk driver.
> hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=79656/16/63, 
> UDMA(133)
> Partition check:
>  /dev/ide/host0/bus0/target0/lun0: [PTBL] [4998/255/63] p1 p2 < p5 p6 >
> Journalled Block Device driver loaded
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding Swap: 979924k swap-space (priority -1)
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
> Real Time Clock Driver v1.10f
> hdc: attached ide-cdrom driver.
> hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.12
> hdd: attached ide-cdrom driver.
> hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> lp: driver loaded but no devices found
> 8139too Fast Ethernet driver 0.9.26
> eth0: RealTek RTL8139 at 0xe400, 00:40:95:32:59:60, IRQ 18
> eth0:  Identified 8139 chip type 'RTL-8139C'
> 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
> via82xx: Assuming DXS channels with 48k fixed sample rate.
>          Please try dxs_support=1 or dxs_support=4 option
>          and report if it works on your machine.
> PCI: Setting latency timer of device 00:11.5 to 64
> ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid 
> [0x107e5368]
> ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid 
> [0x107e5368]
> ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid 
> [0x107e5368]
> ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid 
> [0x107e5368]
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0
> ehci_hcd 00:10.4: irq 21, pci mem e09c9000
> usb.c: new USB bus registered, assigned bus number 1
> ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
> hub.c: USB hub found
> hub.c: 8 ports detected
> uhci.c: USB Universal Host Controller Interface driver v1.1
> uhci.c: USB UHCI at I/O 0xef40, IRQ 21
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> uhci.c: USB UHCI at I/O 0xef20, IRQ 21
> usb.c: new USB bus registered, assigned bus number 3
> hub.c: USB hub found
> hub.c: 2 ports detected
> uhci.c: USB UHCI at I/O 0xef00, IRQ 21
> usb.c: new USB bus registered, assigned bus number 4
> hub.c: USB hub found
> hub.c: 2 ports detected
> uhci.c: USB UHCI at I/O 0xeec0, IRQ 21
> usb.c: new USB bus registered, assigned bus number 5
> hub.c: USB hub found
> hub.c: 2 ports detected
> SCSI subsystem driver Revision: 1.00
> libata version 1.02 loaded.
> sata_via version 0.20
> sata_via(00:0f.0): routed to hard irq line 4
> ata1: SATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF90 irq 20
> ata2: SATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF98 irq 20
> ata1: no device found (phy stat 00000000)
> ata2: no device found (phy stat 00000000)
> scsi0 : sata_via
> scsi1 : sata_via
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
> hub.c: new USB device 00:10.0-1, assigned address 2
> usb.c: USB device 2 (vend/prod 0x3f0/0x7304) is not claimed by any 
> active driver.
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
> usb.c: registered new driver usblp
> printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 
> vid 0x03F0 pid 0x7304
> printer.c: v0.13: USB Printer Device Class driver
> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
> [drm] Initialized radeon 1.7.0 20020828 on minor 0
> [drm:radeon_unlock] *ERROR* Process 1400 using kernel context 0
> 
> --------
> 
> 
> "dmesg" output using kernel 2.6:
> 
> 
> : 126784 pages, LIFO batch:16
>   HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 ACPIAM                                    ) @ 
> 0x000f91a0
> ACPI: RSDT (v001 A M I  OEMRSDT  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40000
> ACPI: FADT (v002 A M I  OEMFACP  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40200
> ACPI: MADT (v001 A M I  OEMAPIC  0x09000424 MSFT 0x00000097) @ 
> 0x1ff40300
> ACPI: OEMB (v001 A M I  OEMBIOS  0x09000424 MSFT 0x00000097) @ 
> 0x1ff50040
> ACPI: DSDT (v001  A0008 A0008705 0x00000705 INTL 0x02002026) @ 
> 0x00000000
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:6 APIC version 16
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: Assigned apic_id 1
> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Built 1 zonelists
> Kernel command line: root=/dev/hda1 ro 
> Initializing CPU#0
> PID hash table entries: 2048 (order 11: 16384 bytes)
> Detected 1533.339 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 510708k/523520k available (1536k kernel code, 12028k reserved, 
> 697k data, 148k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... 
> Ok.
> Calibrating delay loop... 3031.04 BogoMIPS
> Security Scaffold v1.0.0 initialized
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
> CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) XP  1800+ stepping 02
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000080
> ESR value after enabling vector: 00000000
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
>  IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 
> 1-23 not connected.
> ...TIMER: vector=0x31 pin1=2 pin2=-1
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ...... CPU clock speed is 1533.0239 MHz.
> ...... host bus clock speed is 266.0650 MHz.
> checking if image is initramfs...it isn't (ungzip failed); looks like an 
> initrd
> Freeing initrd memory: 4468k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00f48a0
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x548a, dseg 0xf0000
> PNPBIOS fault.. attempting recovery.
> PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to 
> continue
> PnPBIOS: You may need to reboot with the "nobiospnp" option to operate 
> stably
> PnPBIOS: Check with your vendor for an updated BIOS
> PnPBIOS: get_dev_node: unexpected status 0x28
> PnPBIOS: 6 nodes reported by PnP BIOS; 6 recorded by driver
> PCI: Using ACPI for IRQ routing
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169
> ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 177
> ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 177
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
> number of MP IRQ sources: 15.
> number of IO-APIC #1 registers: 24.
> testing the IO APIC.......................
> IO APIC #1......
> ..... register #00: 01000000
> ........    : physical APIC id: 01
> ........    : Delivery Type: 0
> ........    : LTS          : 0
> ..... register #01: 00178003
> ........     : max redirection entries: 0017
> ........     : PRQ implemented: 1
> ........     : IO APIC version: 0003
> ..... IRQ redirection table:
>  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
>  00 000 00  1    0    0   0   0    0    0    00
>  01 001 01  0    0    0   0   0    1    1    39
>  02 001 01  0    0    0   0   0    1    1    31
>  03 001 01  0    0    0   0   0    1    1    41
>  04 001 01  0    0    0   0   0    1    1    49
>  05 001 01  0    0    0   0   0    1    1    51
>  06 001 01  0    0    0   0   0    1    1    59
>  07 001 01  0    0    0   0   0    1    1    61
>  08 001 01  0    0    0   0   0    1    1    69
>  09 001 01  0    1    0   1   0    1    1    71
>  0a 001 01  0    0    0   0   0    1    1    79
>  0b 001 01  0    0    0   0   0    1    1    81
>  0c 001 01  0    0    0   0   0    1    1    89
>  0d 001 01  0    0    0   0   0    1    1    91
>  0e 001 01  0    0    0   0   0    1    1    99
>  0f 001 01  0    0    0   0   0    1    1    A1
>  10 001 01  1    1    0   1   0    1    1    C9
>  11 000 00  1    0    0   0   0    0    0    00
>  12 001 01  1    1    0   1   0    1    1    A9
>  13 000 00  1    0    0   0   0    0    0    00
>  14 001 01  1    1    0   1   0    1    1    B1
>  15 001 01  1    1    0   1   0    1    1    B9
>  16 001 01  1    1    0   1   0    1    1    C1
>  17 000 00  1    0    0   0   0    0    0    00
> Using vector-based indexing
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ11 -> 0:11
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ201 -> 0:16
> IRQ169 -> 0:18
> IRQ177 -> 0:20
> IRQ185 -> 0:21
> IRQ193 -> 0:22
> ..................................... done.
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> Initializing Cryptographic API
> PCI: Via IRQ fixup for 0000:00:10.3, from 3 to 9
> PCI: Via IRQ fixup for 0000:00:10.2, from 3 to 9
> PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
> PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
> PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 1
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing 
> enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> ACPI: (supports S0 S1 S3 S4 S5)
> RAMDISK: cramfs filesystem found at block 0
> RAMDISK: Loading 4468 blocks [1 disk] into ram disk... done.
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 148k freed
> vesafb: probe of vesafb0 failed with error -6
> NET: Registered protocol family 1
> SCSI subsystem initialized
> libata version 1.02 loaded.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with 
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 177
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
> hda: Maxtor 6E040L0, ATA DISK drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, 
> UDMA(133)
>  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
> hdc: LITEON DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
> hdd: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 979924k swap on /dev/hda5.  Priority:-1 extents:1
> EXT3 FS on hda1, internal journal
> hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> input: PS/2 Logitech Mouse on isa0060/serio1
> Capability LSM initialized
> mice: PS/2 mouse device common for all mice
> ts: Compaq touchscreen protocol output
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169
> sk98lin: Network Device Driver v6.23
> (C)Copyright 1999-2004 Marvell(R).
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 169
> eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
>       PrefPort:A  RlmtMode:Check Link State
> sata_via version 0.20
> ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 177
> sata_via(0000:00:0f.0): routed to hard irq line 10
> ata1: SATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF90 irq 177
> ata2: SATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF98 irq 177
> ata1: no device found (phy stat 00000000)
> scsi0 : sata_via
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_via
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
> uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller
> uhci_hcd 0000:00:10.0: irq 185, io base 0000eec0
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
> uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (#2)
> uhci_hcd 0000:00:10.1: irq 185, io base 0000ef00
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
> uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (#3)
> uhci_hcd 0000:00:10.2: irq 185, io base 0000ef20
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
> uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (#4)
> uhci_hcd 0000:00:10.3: irq 185, io base 0000ef40
> uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 1-1: new full speed USB device using address 2
> ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
> ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
> ehci_hcd 0000:00:10.4: irq 185, pci mem e08a1000
> ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> drivers/usb/class/usblp.c: can't set desired altsetting 0 on interface 0
> usblp: probe of 1-1:1.0 failed with error -5
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> usb 1-1: USB disconnect, address 2
> via82xx: Assuming DXS channels with 48k fixed sample rate.
>          Please try dxs_support=1 or dxs_support=4 option
>          and report if it works on your machine.
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> codec_read: codec 0 is not valid [0x107e5368]
> codec_read: codec 0 is not valid [0x107e5368]
> codec_read: codec 0 is not valid [0x107e5368]
> codec_read: codec 0 is not valid [0x107e5368]
> usb 1-1: new full speed USB device using address 3
> drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 
> alt 0 proto 2 vid 0x03F0 pid 0x7304
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected VIA KT880 chipset
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: AGP aperture is 256M @ 0xe0000000
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> Real Time Clock Driver v1.12
> NET: Registered protocol family 17
> eth0: network connection up using port A
>     speed:           100
>     autonegotiation: yes
>     duplex mode:     full
>     flowctrl:        none
>     irq moderation:  disabled
>     scatter-gather:  enabled
> lp: driver loaded but no devices found
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c02fc1a0(lo)
> IPv6 over IPv4 tunneling driver
> [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies 
> Inc Radeon RV200 QW [Radeon 7500]
> agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
> eth0: no IPv6 routers present
> 
> 
> -- System Information:
> Debian Release: 3.1
> Architecture: i386 (i686)
> Kernel: Linux 2.4.27-2-386
> Locale: LANG=it_IT@euro, LC_CTYPE=it_IT@euro (charmap=ISO-8859-15)
> 
> Versions of packages kernel-image-2.6.8-2-k7 depends on:
> ii  coreutils [fileutils]         5.2.1-2    The GNU core utilities
> ii  initrd-tools                  0.1.81.1   tools to create initrd image for p
> ii  module-init-tools             3.2-pre1-2 tools for managing Linux kernel mo
> 
> -- no debconf information
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-- 
Horms



Reply to: