Bug#323452: "hda: dma_timer_expiry: dma status == 0x21" errors + freeze (VIA VT82C686 chipset)
On 2005-08-17 12:11:24 -0400, Andres Salomon wrote:
> What exactly are the SMART errors? If you force a smart short or long test,
> do you get errors?
No errors for short and long tests.
I've attached the output of "smartctl -a".
--
Vincent Lefèvre <vincent@vinc17.org> - Web: <http://www.vinc17.org/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.org/blog/>
Work: CR INRIA - computer arithmetic / SPACES project at LORIA
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 91360U4
Serial Number: C40EF2RC
Firmware Version: MA540RR0
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 4
ATA Standard is: ATA/ATAPI-4 T13 1153D revision 17
Local Time is: Wed Aug 17 19:06:54 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 4295265052
3 Spin_Up_Time 0x0027 234 234 063 Pre-fail Always - 50
4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 3252
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 251 000 Old_age Always - 51826
8 Seek_Time_Performance 0x0027 250 237 187 Pre-fail Always - 163419211169726
9 Power_On_Hours 0x0032 237 237 000 Old_age Always - 346205
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail Always - 89
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 77
12 Power_Cycle_Count 0x0032 249 249 000 Old_age Always - 1884
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 4920
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 279723
201 Soft_Read_Error_Rate 0x000a 253 251 000 Old_age Always - 25770101532
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 297756
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 297756
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 297756
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 297756
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 89
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 89
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
Warning: device does not support Error Logging
SMART Error Log Version: 1
ATA Error Count: 1715 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1715 occurred at disk power-on lifetime: 5409 hours (225 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 c8 00 00 00 00 e0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 08 00 00 e0 08 01:40:37.952 READ DMA
c8 00 00 08 00 00 e0 08 01:40:37.920 READ DMA
10 00 00 3f 00 00 e0 08 01:40:37.904 RECALIBRATE [OBS-4]
c8 00 00 08 00 00 e0 08 01:40:37.872 READ DMA
c8 00 00 08 00 00 e0 08 01:40:37.840 READ DMA
Error 1714 occurred at disk power-on lifetime: 5409 hours (225 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 c8 00 00 00 00 e0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 08 00 00 e0 08 01:40:37.920 READ DMA
10 00 00 3f 00 00 e0 08 01:40:37.904 RECALIBRATE [OBS-4]
c8 00 00 08 00 00 e0 08 01:40:37.872 READ DMA
c8 00 00 08 00 00 e0 08 01:40:37.840 READ DMA
c6 00 01 00 00 00 e0 08 01:40:37.840 SET MULTIPLE MODE
Error 1713 occurred at disk power-on lifetime: 5409 hours (225 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 c8 00 00 00 00 e0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 08 00 00 e0 08 01:40:37.872 READ DMA
c8 00 00 08 00 00 e0 08 01:40:37.840 READ DMA
c6 00 01 00 00 00 e0 08 01:40:37.840 SET MULTIPLE MODE
f8 00 01 00 00 00 e0 08 01:40:37.840 READ NATIVE MAX ADDRESS
10 00 00 3f 00 00 e0 08 01:40:37.840 RECALIBRATE [OBS-4]
Error 1712 occurred at disk power-on lifetime: 5409 hours (225 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 c8 00 00 00 00 e0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 08 00 00 e0 08 01:40:37.840 READ DMA
c6 00 01 00 00 00 e0 08 01:40:37.840 SET MULTIPLE MODE
f8 00 01 00 00 00 e0 08 01:40:37.840 READ NATIVE MAX ADDRESS
10 00 00 3f 00 00 e0 08 01:40:37.840 RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ef 08 01:40:37.840 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 1711 occurred at disk power-on lifetime: 5409 hours (225 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 c8 00 00 00 00 e0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 08 00 00 e0 08 00:00:15.216 READ DMA
c8 00 00 08 00 00 e0 08 00:00:15.184 READ DMA
10 00 00 3f 00 00 e0 08 00:00:15.168 RECALIBRATE [OBS-4]
c8 00 00 08 00 00 e0 08 00:00:15.152 READ DMA
c8 00 00 08 00 00 e0 08 00:00:15.120 READ DMA
Warning: device does not support Self Test Logging
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5409 -
# 2 Short offline Completed without error 00% 5409 -
Device does not support Selective Self Tests/Logging
Reply to: